TURBO Hyundai Santa Fe 2.0 Spark Plugs and Air Filter 

Hey my friend thanks for the suggestions. I'm pretty sure I mentioned to make sure that the hole is clean before you pull the spark plugs out. Unfortunately most times on the majority of engines you'll end up with dirt around the spark plug. Of course just make sure it's nice and clean before you install your new one. As for the duct tape I guess you could use that if you didn't have a spark plug socket but I don't recommend it. It's always best to use a spark plug so I can that's designated to hold the spark plug that way it doesn't fall out. Or use a tube instead of duct tape because you don't want pieces of duct tape stuck to your smart plug.

Hey Mike. What the difference is in these two plugs is the heat range. Basically the lower the number the hotter the plug. So the plug that is a 20 is hotter than the 22. Essentially if you are driving your car harder you want to go with the colder plugs so that it can dissipate heat from the spark plug more efficiently. If both of them are recommended for your car of course then you can choose between the two depending on your driving habits. I hope that helps you.

I will be posting a video on how to do that very soon :-)

I definitely did clean out the air box. They are quite persistent rodents. Thank you for watching :-)

If you get the dealer plugs they are pre gapped and should not be adjusted because most likely you will end up breaking the electrode tip which will destroy your plug. That's specifically why I did not mention the Gap. The specific gap for a 2 Liter turbo is 0.7 to 0.8 mm 0.028 to 0.031 inch, good luck 👍

Thank you. I will try to keep that in mind the next time I make a video on a Hyundai 🙂