Turbo Feed and Drain Sizing, Components, and Details can be the most important factor in the lifespan, performance, and durability of a turbocharger.
In today's tech tip tuesday we talk about oil drains. While RTV silicone gasket maker has a wide variety of uses. We feel that it should be avoided when working with installing an oil drain flange. As you have seen in the video the rtv can dry and create a blockage from flow. Even worse those overhanging globs can come off and get into other places they shouldn't.
The simple principles of a turbo is that it needs high (ish) pressure oil in, and no restriction out. When a blockage happens on the outflow, the pressure needs to find a place to go. Because the engine still delivers copius amounts of oil, the oil tends to work its way out the shaft seals and into housings. This creates issues across the board. You do not want oil in your intake piping or intercooler, and you also do not want oil in your exhaust as it will ruin Wideband O2 sensors, create clouds of smoke that makes it look like Uncle Buck driving your race car, not to mention decrease turbo lifespan.
Gaskets are a usable option, however, in many cases the gaskets do not have the appropriate size hole and can also become a blockage. Additionally, when taking things apart, if you do not have another gasket this can become a frustration point. Plus they simply do not always seal the best.
Which leads us to our new high flow drain flanges with integrated high temp orings. There is enough crush area to equal great sealing across the board. Our funnel design allows for no blockages. To seat the O-ring we use a dove tail cutter which retains the Oring. This means that there are no worries about it coming apart and stretching when taking things apart, and also you can install easily on vehicle, and did we mention reuse it?
For more info on our billet turbo drain flanges click below:
For our T3 T4 and Midframe Turbo Drain Flanges in 10AN Click This Link
www.motionraceworks.com/produ...
For our Large Frame and GT55 and Pro Mod Turbo Drain Flanes in 12 AN Click this Link
www.motionraceworks.com/produ...
9 июл 2024