Turn Your Jon Boat Bench Into Storage

Подписаться 55 тыс.

Просмотров 323 тыс.

50% 1

ADD STORAGE TO YOUR JON BOAT!!!
For jon boat build or modification inquiry, please email me! No project too small.
- brigadeboats@gmail.com
FIND OFFSET PIANO HINGE USED HERE-
tbnation.net/products/offset-...
FIND ANGLED ALUMINUM FOR FRAMING HERE-
tbnation.net/products/angle-a...
In this video I'm going to show you how to turn your jon boat bench into storage!
A customer dropped off a quick turn around project to me at #brigadeboats to work some magic on. This is a "balling on a budget" project. Something simple and cost effective yet adding to the functionality and fishibilty of the boat. The platform is a #trackerboats Topper 15. I'll show you in this video step by step how to add some storage to your jon boat to give you that #jonboattobassboat feel!
In this video I cover everything I do to turn your jon boat bench into added storage! Video includes: how to gut the rear bench, foam removal, how to cut your hand, prepping inside of bench for paint, framing in aluminum and rivets, paint, cutting hatches out of wood, sealing wood hatches with resin, carpeting hatches, installing offset piano hinges, mounting hatches and decking to boat, installing foam floor, carpeting foam floor, finishing touches, all materials and tools needed, final product, and tips and tricks along the way.
Talking to you on camera helps me not talk to the voices inside my head. Thanks for watching, hope this helps someone with their project!
__________________________________________
FIND ME ON SOCIAL MEDIA-
Anthony Jones :
Instagram: invitescon...
or adubjones
Please contact for SERIOUS PROJECT INQUIRIES
BOOKING NOW
Brigade Boats Facebook- / brigade-boats-10071137...
________________________________________
PT5 FISHING
A wonderful Georgia owned apparel company and supporter of the channel: www.pt5fishing.com
Enter code: TOPGUN10 for 10% off upon check out. AS ALWAYS, THE BIGGEST WAY YOU CAN SUPPORT IS TO CLICK SUBSCRIBE Thank You.

Опубликовано:

12 апр 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 238

@southernexposure123 2 года назад

Nice job. Black reveal is OK. Paining the bulk of the inside white will give better visibility especially at night.

@earthpod 2 года назад

Using the recip saw- hold the saw vertical so that that shoe rides on top of the metal your cutting. This will stop the vibration of the saw and make it controlled cuts easier. 😊

@AnthonyJonesBrigadeBoats 2 года назад

Appreciate it! I upgraded to a circulars on the next one, it worked MUCH better. Not sure why I used the recip saw on this one besides trying to show off I can cut straight lol

@lostone260 9 месяцев назад

Great clasp. Rigid interior shelves. ru-vid.comUgkxBrJOMRANMI82dPOK0qoDtHhP-JpbErUg Yeah the shelves sometimes get misaligned with their supports in the lid if you don't have the lid fully flat, or you twist the shelves as you're pulling them out, but pretty much a non issue; just reseat and you're fine. Some spools of thread are a little too big and cause the shelves to not close all the way, however with the clasp you can still get the lid locked if the shelves aren't completely collapsed without breaking things ... so far.

@58landman 3 года назад

Beautiful work and I loved this vid but I have a question. Why would you not complete the entirety of the work on the inside of the storage area before replacing the center section of the seat?

@Steve-qw8hj Год назад

Same

@greggmeyer5836 Год назад

Same?

@MarshallLanier-oi1mk 11 месяцев назад

I was wondering that as well

@steverobbins736 11 месяцев назад

Probably the same reason we've all been in the same situation. You get ahead of yourself.....get on a roll when things are going good and skip a couple steps......end up painted into a corner so to speak

@greggmeyer5836 11 месяцев назад

Naaaa come on this guy does this for a living.

@backtoschool4845 Год назад

Excellent information. I came accross this video and have copied step by step and now by jon boat looks great. Thank you so much for taking the time to make this. You are a great teacher.

@AnthonyJonesBrigadeBoats Год назад

I appreciate the positive feedback! Glad the videos were of service to you

@jasonsmith3726 2 года назад

Very nicely done. There’s a few things I would have done differently but I only noticed certain things because I watched you do it. You get better each time and we all learn from our mistakes along the way. You figure out what works best and what is the most efficient way to do things. Needless to say the end result you had was awesome. It’s a lot of work. I buy and build John boats and fish out of them for a year and then sell it and then buy another one and start over. In your head you think you can always bang it out real quick and then once you start sanding and prepping for paint you are quickly reminded of how much work it is to build one. I started out with a canoe I got for free. I refinished it, used it a few times and then sold it and used that money to buy a John boat. I then did the same thing and with that money I bought 2 more John boats and so on and so forth. I try to have 2 at all times so I can finish one and fish out of it while I’m building the other and then I will sell one. I’m working my way up until I have the money to buy a nice war eagle or something without having to take any money out of my bank account.

@valkyrie6926 2 года назад

You did a really good job on this project! Good video! 👍

@matthews122 2 года назад

Always throw things for extra good luck show the boat whos boss love this video and the carpet install vid.

@odiesclips7621 2 года назад

Excellent video! Just what I need to do. Thank you.

@robertgoss4842 Месяц назад

Excellent video. Good craftsmanship, good ideas. Thanks for the show!

@AnthonyJonesBrigadeBoats 28 дней назад

Thanks for watching!

@iwantosavemoney 11 месяцев назад

This is awesome more functional and using what is their very nice.

@Shipfixer 3 года назад

Very nice job! I'm going for the same thing on my jon boat. Just a tip: A skill saw works great for cutting aluminum sheet. The carbide blades go through it like butter. But just keep a firm grip on the saw in case it bucks back on you. Hearing and eye protection a must! Greetings from Alaska. Oh yeah, plywood is $100 a sheet here where I live. Unreal.

@blakebarnett5078 2 месяца назад

I was able to find alucobond at a sign shot for $60 per 4x8 sheet. Did the floor in my boat. 1 3/4" foam in the floor between the ribs. I believe im going to go with a textured paint on the floor. You did a great job trying to get ideas on how im going to do the front deck and put a rear bench back in the boat with storage like you did here. I like how you did the strips of foam under the foam board. For an air gap. Great work.

@alanroberts3765 3 года назад

Clean great job wonder if i can do that in my deep v rear bench without a re pour of foam

@davidaguiar1387 6 месяцев назад

Nicely done and helpful!

@BuccarooRanch23 2 года назад

The cleanest way to remove the foam is to take some liter fluid and a match. Then vacuum the remains out.

@51seluj 2 года назад

I loved the video! I made mine a little differently though. The seat lid is just one large piece connected to the aluminum with a piano hinge. It was a lot easier than aligning multiple pieces, and i have more access. It works great on my 14' Jon. I coated with polyester resin and primed and painted with Total Boat polyurethane paint and it turned out great! Thanks for the tutorial :)

@alenjones5606 2 года назад

Good job 👏. Can’t wait to try it.

@randystevenson1264 Год назад

Really like that idea with subfloor form idea great video alot good info

@AnthonyJonesBrigadeBoats Год назад

Thanks , appreciate it. Glad it helped

@gregphillips1998 2 года назад

I like how you countersink the rivets. I never would’ve thought of that. Also, get a scrolling blade for the sawzall. You’ll be able to cut nice straight lines because you can control the blade without it walking on you. Nice job. 👍

@dirtnapz996 2 года назад

That’s insane! Thanks for the tip!

@tylerjones5395 3 года назад

use a washer to drill your pilot hole first using your hole saw on metal. love the content have my own john boat build gonna be the baddest on the Tennessee River

@BeardsAndBowsOutdoors 3 года назад

Great diy video! Fish on! 👊

@fireandmetalfishingwithlyo9025 3 года назад

Nice work man🤙🏼

@gualberto921 9 месяцев назад

I was reluctant to use a machine polisher because of hearing the horror stories. DEWALT delivers as usual. ru-vid.comUgkxfzbDkCRyv3CFXnLZI4APZtRRuG2uRmP2 I watched a couple Chemical Guys RU-vid videos and started with their medium to finish pads and polished. After experimenting on my tonneau cover I quickly Figured out the machine. It is an art. Just spread polish at the lowest rpm then move up to a higher Rpm to polish (not too high or it gets messy) Just keep it moving and let the machine do the work. Do not press down! The weight of the machine is enough. You will have Wax on wax off Larusso quality in no time at all!

@meneermalik Год назад

Nicely done! Thanks for the info, will be converting my seats now. Also, that's why you should always wear gloves when working!

@njseashorechas2698 4 месяца назад

I tried preserving plywood with epoxy resin. Its more flexible than fiberglass resin. It eventually broke down from the wood expanding and contracting. They sell 4'x8' pvc (Azek) board in different thickness's at home depot. It would work great for flooring also.

@flipmyjonboat4485 3 года назад

I gashed my hand up too doing the same thing on my middle bench seat!!!

@FarkyDave 2 года назад

I love this video. I just bought an 2007 Alumacraft 1648 and am thinking about doing the storage on the middle seat pods that are on the sides of the boat.

@AnthonyJonesBrigadeBoats 2 года назад

Awesome, good project boat

@whitroberts4045 3 года назад

Great job buddy!!

@dennysmartin775 2 года назад

hey anthony amazing builds you should try the same jon boat or a tracker adding a console to it.

@michaelmcelwain2053 Год назад

Cool job. Glad found your channel.

@waddell7354 3 года назад

I like this but since I duck hunt out of my jon I'd rather keep the foam in case I get swamped.

@bobhetherington811 3 месяца назад

Nice work

@noeguzman4657 3 года назад

Awesome cuz. Good job.

@connorrobertson7619 Год назад

This was very helpful

@hoyt1198 3 года назад

Awesome job i am looking at ideas for storage in my jon boat

@AnthonyJonesBrigadeBoats 3 года назад

Thanks man! Plenty of solutions to add storage.

@TheGoatMumbler 3 года назад

Nice work. But I bet it would have been easier to do all that interior work BEFORE the top was in place. :)

@AddictedCrewCatfishing 3 года назад

Worked harder, not smarter on this project.

@panhandlepilot9363 2 года назад

I’ve never countersunk rivets. Are these a special kind for countersink holes? Nice job

@PeterMoua-vx3mb Год назад

Great Video brother! Learned a lot. Jw but would you be able to do that to the front bow as well?

@bidkid2020 2 года назад

Nice job enjoyed your video

@cahabaoutdoors6549 3 года назад

Great video 👊👊

@rolandoconcepcion1849 Год назад

Good job 👏

@AlIsUpOutdoors 3 года назад

Great video, just a minor critique. Personally I would have put the divider and the flooring in before I mounted the top center bench back into place.

@AnthonyJonesBrigadeBoats 3 года назад

Your dead on. I got ahead of myself for sure. It still worked out, would do differently next time.

@AlIsUpOutdoors 3 года назад

@@AnthonyJonesBrigadeBoats that’s the great thing about building boats. Always a learning experience.

@edwardm438 Год назад

That's awesome.

@AnthonyJonesBrigadeBoats Год назад

Thank you!

@MR-ri1qp Год назад

Nice work!

@AnthonyJonesBrigadeBoats Год назад

Appreciate it!

@hunterwilson6871 2 года назад

You're a lot more dedicated to it than I am , I would have brought out the propane torch, melted it all out

@medeiros3610 Год назад

😂 the chainsaw was excellent. Thanks for the great ideas as I am taking on a similar project this winter.

@AnthonyJonesBrigadeBoats Год назад

Most definitely! Good luck on the project!

@Morlyst 2 года назад

Cool upgrade! However, isnt the room where you placed the storage supposed to give uplift incase it sinks? Hopefully his dock isnt too deep :p

@freddiemak2023 2 года назад

Could you upload a how to rivet tutorial and everything from drill bits to rivet guns you use.

@FINNTVBASSFISHING 3 года назад

Enjoyed the video

@AnthonyJonesBrigadeBoats 3 года назад

Thanks!!

@KH-ub6xv Год назад

Hope this gets to you, but I’m in the process of building out a brand new Lowe aura. I cut the back bench out and removed the foam and added hatches for storage. The bench flexed a lot now under a load. Did you have that same issue when you did this? If so, is that why you added the aluminum bracing?

@brandenstevens 3 года назад

Very nice 👍

@nate4036 Год назад

I’m going back over some of simple projects to repeat on a buddies boat. For a moisture barrier under the foam, consider corrugated plastic. (Where the budget allows)

@AnthonyJonesBrigadeBoats Год назад

Thanks!

@Dangbo3030 Год назад

I like that idea. I might even put a few louvered vents in the front and back of the bench for more air circulation. I definitely want it to be as dry as possible

@nate4036 Год назад

@@Dangbo3030 not a bad thought. I’ve seen some run very small 12v dehumidifiers. May be overkill

@williamdunn9010 2 года назад

I’m not too sure about gluing carpet to foam. I would have thought you would put aluminum ribs then put the foam in the gaps then sheeted the bottom with carpet covered plywood or aluminum sheet. Thoughts?

@leroyjeter9797 3 года назад

What are the two metal pieces behind the bench called? Could you also make storage in those two spaces?

@JLanc1982 3 года назад

That's Awesome! your work is Nice and Clean!

@tylerbrengle9652 10 месяцев назад

What are the screws you're using at 20:56 going into underneath of the carpeted seat you made? Are they just going through the surface of the original seat or is that one of the spots where you have the aluminum crossbars spanning the seat?

@jacobellis1903 2 года назад

I'd recommend predrilled g holes in the aluminum before placing the boards and screw it from the bottom. No screw heads to catch your pants.

@baseball912 Год назад

That looks great but what if it rains and all that carpet gets soaking wet. How do ya cope with that? How long does it take to dry?

@artlife6210 4 месяца назад

Great video Anthony, is it me or are the number of people making videos about how great their new Classic XL is growing exponentially? Does Tracker give them a discount to make a video when they buy one I wonder? And whats funny is how these same folks brag about their new Tracker, but then spend thousands doing upgrades that Tracker shouldve done from the start. Anyone can watch your channel and build a better boat for half the money if they really want to, and add the stuff they want from day one, instead of making a 17,000 dollar Tracker into a 23,000 dollar Tracker lol.

@scottjordon 2 года назад

That’s Awesome!! I have the same boat and would love to have that done to it….where are you? And how much did the total bill come out too? Labor plus parts and I have cash 💰

@isaactungate6669 Год назад

My boat is small 14 ft v-hull. Benches don’t do all way down to floor like Jon boat your working on. Any suggestions on what I should do

@ernieforrest7218 Год назад

I will say your work looks very good, but frankly i was floored by your return comment regarding removing the foam floatation. Yes, you are correct in your opinion as to it not being necessary unless the boat flips over. Building codes are implemented for the benefit of the buyer, not the builder. Having been a home builder for over 40 years as well as a boat owner, i can attest to that. Hanging onto a boat that wont sink would be a better option than having the boat on the bottom and nothing to hang onto in my opinion. Coolers stashed in a small cabin have been documented in keeping a boat afloat, and thereby keeping the occupants alive. My opinion is that if you need more space for storage, get a bigger boat or find a better way than eliminating the floatation. For the record, boats over 22’ in length arent required to have floatation. But fact is that many of the better ones do, and for a very good reason. I do have a 14’ jon boat, and i did create more storage space, without removing any foam floatation i might add.

@AnthonyJonesBrigadeBoats Год назад

My response was not meant to "floor" you. I didn't take it as a rude response. The fact of the matter is that I have a large viewership here. A lot of know it alls that feel the need to infere their opinion on my platform. The foam thing seems to trigger a lot of folks. Even though I've proved time and time again on video, it isn't doing what you think it will do. I could go on and on about modifications, weight capacity, howadding extra storage or decking can help it sink if flipped over, ect. We could even talk about modifications and how they aren't universal or regional, depending on the waters and intentions of the boat use. No point really. You do as you please with your boat, others will do as they want with there's. I can appreciate you like the foam. I think boat licenses should be required in all states. I think more guys should wear their kill switch lanyards. I think life jackets will save way more lives than relying on foam in an old aluminum boat to keep you afloat. Just my opinion, apparently, everyone's got them. Thanks for watching even with disapproval of foam removal. Happy boating.

@alext4319 10 месяцев назад

I have a old 14 foot ryan craft there was never foam in it.

@DiamondKOutdoors 11 месяцев назад

What are the measurements for the cuts of wood up top? Or how would you figure that out

@Twiztidm1nd Год назад

Great video. What is the drill bit you are using for where you are adding new rivets to keep them flush?

@AnthonyJonesBrigadeBoats Год назад

Countersink bit

@brianfranklin7893 3 года назад

Great how to video! Can't wait to start on my 15' Fisher marine 👍

@AnthonyJonesBrigadeBoats 3 года назад

thanks, good luck on it!

@user-vb1lh2ws7d Год назад

멋 진 기술자네요 very nice video

@AnthonyJonesBrigadeBoats Год назад

Thanks for watching!!!

@offthetrails4799 3 года назад

Where did you buy that carpet Nm i just got to where you said home depot

@noahratliff1089 3 года назад

exactly the video i needed . love the vids bro

@AnthonyJonesBrigadeBoats 3 года назад

Thanks bro

@bitenbass 3 года назад

Dr Jones nice work

@AnthonyJonesBrigadeBoats 3 года назад

Thank you fine sir! Good to hear from you!

@bitenbass 3 года назад

@@AnthonyJonesBrigadeBoats yeah man been a while I been watching your vids tho...!

@AnthonyJonesBrigadeBoats 3 года назад

I know cuz! Always "Dr Jones" that's why I say, good to hear from you! Thanks👊

@bitenbass 3 года назад

@@AnthonyJonesBrigadeBoats yahhhhh u the man Dr jones!!

@edwincarmona3978 8 месяцев назад

Where did you get the carper from?

@donsgotmoney 3 года назад

Was there a specific reason you didnt finish out the interior storage place before installing the aluminum top. It seemed to me that it would have been much simpler to install the partition divider and finish out the flooring with the top panel off? It looks great by the way, gives me some inspiration to do my Alumacraft.

@AnthonyJonesBrigadeBoats 3 года назад

No. Was making it up as I went along. It wasn't so bad or I'd simply have drilled the rivets out and removed the top. Take away what you can from it and do as you please.

@DaydreamAboutNiceThings 2 года назад

Nice

@chucksmith5002 2 года назад

You got me. Why didn`t put the Foam & Carpet in Hatch before you put the top Skin back on. Very good job

@AnthonyJonesBrigadeBoats 2 года назад

I was making it up as I went along.

@jacklowe3788 2 года назад

Nice job -What type & size rivets & gun do you use? Some sort of drill rivet system?

@AnthonyJonesBrigadeBoats 2 года назад

3/16 inch countersink rivets with 1/4-3/8 inch grip range. I use an impact drill w 3/16 titanium bit to drill hole, a regular drill with countersink bit to flush out rivet head, a Milwaukee m12 battery powered rivet gun for rivets

@stevenl.halesr.6894 3 года назад

Great job, but I would have added a rear live well between both hatch compartments...Yeah, it makes the storage areas a bit smaller, but it looks to me like they are the perfect size for several crank bait boxes, among other things...STILL a Great Job though!!!

@AnthonyJonesBrigadeBoats 3 года назад

Thank you. Yes, livewell would have been nice! This customer didn't need one nor was it in the budget. Just simple storage solution. But you can definitely do a livewell no problem, as have I in the past.

@FranklinHicks-qs4gs 2 года назад

Well get your own damned boat mr picky

@karsonsylvester8507 3 года назад

What was that weird looking bit you were using to make the rivets flush called?? Also, what kind of rivets were those.

@AnthonyJonesBrigadeBoats 3 года назад

Countersink bit. 3/16 countersink rivet w grip range of 1/4-3/8

@masonprice4177 4 месяца назад

Why do they put the foam there. Does it affect the stability or does it not even matter if it’s there. I don’t know anything about Jon boats so I would like to know if it makes a difference

@haider8167 Год назад

Looks nice…

@AnthonyJonesBrigadeBoats Год назад

much appreciated!

@WindowLicker454 2 года назад

What would you recommend to protect the foam floors from gasoline if it were spilled in the boat?

@AnthonyJonesBrigadeBoats 2 года назад

Gas eats foam. My advice, try not to spill a whole bunch of it everywhere.

@MarshallLanier-oi1mk 11 месяцев назад

Now I know you are a fellow Georgia boy! Afraid of gittin' bit by a black widder! Welcome to God's Country!

@scottstitcher2291 Год назад

do you have any videos on how to add storage space to a fiberglass jon boat?

@AnthonyJonesBrigadeBoats Год назад

I do not unfortunately

@cbablackhawk8807 3 года назад

IM DOING THIS, VERY CLEAN

@AnthonyJonesBrigadeBoats 3 года назад

Thanks man

@ncsandman8468 2 года назад

I wonder……….. how hard is the foam to remove from inside the seat???? 🤔 lol just funnin, great job man

@WillemLuntungan 2 года назад

I like vidio 👍👍

@noahdboss1195 3 года назад

did you put wood on top the foam or just carpet over the foam in the bottom of the box?

@AnthonyJonesBrigadeBoats 3 года назад

I just carpeted over the 1 inch green foam.. It's solid, closed cell didn't see a need for wood.

@noahdboss1195 3 года назад

@@AnthonyJonesBrigadeBoats gotcha. Planning on doing this to my boat and wanted to see if you did wood over foam or not. Thanks man keep it up!

@gethiggywitit7338 Год назад

man I get cut and scrapes every time I messing with the boat. Rebuilding my deck now and had piece of aluminum shoot from the saw. It hit my thumb and still had enough force to hit the shed. Crazy man.

@gethiggywitit7338 Год назад

Oh and my saw is just like yours

@AnthonyJonesBrigadeBoats Год назад

Saw is a mangler man. It's taken me a while to finesse how to cut without shooting parts across the yard or ripping my hand off. I could go buy a bigger, better, safer saw but there is no fun in that.

@gethiggywitit7338 Год назад

@@AnthonyJonesBrigadeBoats exactly lol

@noahjohns7954 3 года назад

Will taking out some bench foam effect how the boat floats? I want to be sure before I have a boat so that I know what to do right off the bat. I don’t plan on taking it a place it’ll swamp lol

@AnthonyJonesBrigadeBoats 3 года назад

Only effects it if you flip it or if you try the submarine mod

@noahjohns7954 3 года назад

@@AnthonyJonesBrigadeBoats I don’t plan on doing any of those maneuvers with my boat! Looks like I’ll be making plenty of storage in the benches when I have enough money for the boat I want. I’m halfway there! Only a few more months of grinding until I can get my jon boat and trailer

@BluegrassNBass 3 года назад

These tiny boats require a certain area of foam to meet coast guard standards.

@fishing_with_TR 3 года назад

Nice! Just found your channel. Do you have a video on how to make a live well out of the jon boat bench? 60 gal plus?

@noahjohns7954 2 года назад

Yah but it’d make the boats speed and turning radius total crap with that much water in it

@bjodaddyo 2 года назад

60 gal well? How much weight capacity does a boat this size have? 1 gal = 8.33 lbs.

@fishing_with_TR 2 года назад

It would be for catfish tournaments. We catch a lot of fish over 40", so most stock live wells are just too small. Hagen Grubbs shows how to make one out of a tool box on his channell, but since I have a jon it would make sense to make it out of one of the benches.

@noahjohns7954 2 года назад

@@fishing_with_TR ya but do the math. 8.33 pounds per gallon x 60 gallon= more than a 14 foot Jon boats weight capacity once you add fishing gear and a motor and gas and an anchor. It’s not logical unless you have a boat designed with one or that can take it. Use your mind before you sink a boat or completely rip the boat in your driveway. That’s putting your life in your hands in a bad way, but you do you boo

@fishing_with_TR 2 года назад

@@noahjohns7954 no worries. I have an 18'. I already use a 64 gallon plastic tote that's modified as a live well. The boat can handle it. Just would prefer to mod a bench for more space.

@shanepeter1616 3 года назад

The benches in my 14' MirroCraft are filled with Styrofoam that in pretty sure is glued to the sides of the bench. What's the best way to remove it when it has been glued in?

@frankorosz901 3 года назад

Don't remove the flotation material. That is what will keep your butt afloat when the unplanned disaster becomes the " oh crap what do I do now" right now disaster.

@shanepeter1616 3 года назад

@@frankorosz901 I'm adding in new foam in under the deck. It will actually have a LOT more foam than it has now when I'm done for that very reason.

@Pmit123_ 3 года назад

What screws are those? With that Milwaukee drill gun

@zachmedeiros4163 3 года назад

I believe that’s actually a Milwaukee rivet gun. And he’s more than likely using aluminum rivets.

@tuyo_adventures.2185 2 года назад

Question: Do you apply the resin on both sides?

@AnthonyJonesBrigadeBoats 2 года назад

I used to once upon a time. Over time I realized it really only needed it on the tops where rain water would normally penetrate. For floors you can do top and bottom to protect from flooded boat. It's more material and labor doing the whole thing so you just have to make that decision yourself. Me, I just do tops and sides now. Oil based paint bottoms usually.

@dustinmartin9538 Год назад

@@AnthonyJonesBrigadeBoats I just framed out my casting deck using treated plywood and opted out of using the resin. Is this a bad idea?

@lynnmaureenshevshenko8254 Год назад

is it wise to remove the floatation foam?

@AnthonyJonesBrigadeBoats Год назад

You only need it if you flip the boat. So to me, its wasted space. I carry life jackets and run a bilge pump in case of leak.

@rcfanatics1834 3 года назад

Anthony Where did you get the rivets

@AnthonyJonesBrigadeBoats 3 года назад

tbnation.net/products/rivets?ref=builtforbattle&variant=34317257539719

@MisoJuice Год назад

Any other way to do hatches in your bench seat that will keep the lids flat to the bench seat itself instead of raising it that 1/2”??

@AnthonyJonesBrigadeBoats Год назад

Yes, aluminum drop in hatches

@MisoJuice Год назад

@@AnthonyJonesBrigadeBoats ok thanks. Wasn’t oooking to spend $300 or more on hatches for this cheap boat I have.

@marklikeinthebible 3 года назад

Hey cuz do you resin both sides of the plywood

@AnthonyJonesBrigadeBoats 2 года назад

Nah cuz I just do the tops real good and get the sides

@marklikeinthebible 2 года назад

Ok thanks im having to hold off a minute I may use road signs for my floor 😅 lumber is high as giraffe ass! Thanks for your reply cuz.

@jmlochala 2 года назад

Did it change the buoyancy and/or balance of the boat?

@AnthonyJonesBrigadeBoats 2 года назад

No. Unless he flips it upside down in water. Then things will change...

@aaronwatrous6166 2 года назад

What was the height of the piano hinge? There are a few options. I assume it was 5/8 as you were using 1/2 plywood.

@AnthonyJonesBrigadeBoats 2 года назад

yes, 5/8

@thomassater3462 2 года назад

@@AnthonyJonesBrigadeBoats I wondered the same thing. 5/8" for this carpet (the thin Home Depot product) seems to work for sure. For 1/2" ply with 20 oz boat carpet (a.k.a. the good stuff), I reached out to Tiny Boat Nation, because I wasn't sure what to buy. They recommended 3/4"-height hinge to me. This seems to be "on target" if I don't cut out the carpet where the hinge goes. The wood is 1/2", and I get about 1/8"+ of thickness from the carpet squashed between the underside of the wood and the hinge, then the glue and carpet on the top side.

@philh.363 3 года назад

How much did you charge the customer for this job. I am interested I live in GA also

@timdeepy6202 2 года назад

Ya I wanted to know as well. Great video ty

@colesaunders745 3 года назад

By doing this, does it affect the buoyancy of the boat?

@1SevenZero 3 года назад

Don’t know if you ever got an answer to this, so figured I would chime in. As long as the boat isn’t flooded then no, because the hull is displacing water (not the foam). If the boat floods then yes, because the foam would then be displacing the water.