Тёмный

Turn your Trailer Jack into an Offroad and Trailer Dolly Combo 

Gwinnett Lawns
Подписаться 6 тыс.
Просмотров 23 тыс.
50% 1

In this video, I will show you how to Turn your Trailer Jack into an Offroad and Trailer Dolly Combo. This will allow you to roll the trailer on grass, sand, dirt, gravel and other uneven surfaces.
Gwinnett Lawns performs these services and others such as lawn care, crepe myrtle pruning, light landscaping, spring and fall cleanups, leaf removal in Lawrenceville, Dacula, Grayson and surrounding areas. Take a look at my webpage gwinnettlawns.com/. Check out my new Truth Social GwinnettLawns
#trailerjack
#trailerdolly
#gwinnettlawns
Here are the items I used in this video.
Rubber Coated Magnet Mount GoPro▶ amzn.to/3UvSOeV
GoPro Hero 9 Black▶ amzn.to/3X0DZTi
Iphone 13 Pro▶ amzn.to/3UUwvzI
Mack's Ultra Soft Foam Earplugs▶ amzn.to/3CDHdUG
Decibel Defense Safety Ear Muffs▶ amzn.to/3Cbkpu6
Solaris Sun Cap▶ amzn.to/3ypa1xO
Scotts Motorcross Goggles▶ amzn.to/3CiW1H6
Swim Goggles, YAKAON Polarized▶ amzn.to/3fNO0SP
RZ Mask M2.5▶ amzn.to/3MiJx70
Equipment I am currently using:
-------------------------------------------------------------
Hour Meter▶ amzn.to/31k2RuG
Echo PAS 2620 ▶ amzn.to/2WCS4qS
Articulating Hedge Trimmer ▶ amzn.to/2TBd8fq
Echo SRM 225 String Trimmer▶ amzn.to/2MRmLV6
Honda HRX 217 Mower▶ amzn.to/2D4t3Mj
Echo PB 8010T Blower▶ amzn.to/2D32bfO
Edger Blades▶ amzn.to/2WaIX0f
Jungle Jims Mower Lift▶ amzn.to/2WjoZR0
DynaplugTire Plug Kit▶ amzn.to/31FDql2
Powertye Ratchet Tie Downs▶ amzn.to/2MpNcSL
Etrack section▶ amzn.to/2s6LhLH
Etrack mount plate▶ amzn.to/35RYjLC
Longacre Oil Filter Cutter▶ amzn.to/2R6Jct4
BigBoyJapaneese Saw▶ amzn.to/2Jzh9Sa
gwinnettlawns.com/

Опубликовано:

 

28 ноя 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 55   
@Casanovafff
@Casanovafff 24 дня назад
Awesome idea
@wesleycampbell978
@wesleycampbell978 Год назад
Well done. Didn't know where you were going with the iron tee until the handle came out. You made a great idea even greater. Thanks!
@mattc.310
@mattc.310 6 месяцев назад
I've been seeing this in my brain for a few days after moving my camping trailer got out of hand. It will be substantially heavier duty, but the same basic idea. Thanks for bringing my brain images to life.
@davidesquivel2282
@davidesquivel2282 6 месяцев назад
Great idea, I have being looking for a video like this, I'm 79 years old and this will make it very easy to move around and I also like the full handle. Great Job! thanks
@user-op1us8ut7g
@user-op1us8ut7g Год назад
Awesome tutorial and idea. Used this on my landscape trailer. Saves me so much trouble because it sits in my back yard. Thank you sir
@FishingwithCristina
@FishingwithCristina 11 месяцев назад
That’s amazing I’ve never seen a set up like that I love it thank you so much for the link
@computergardener
@computergardener 8 месяцев назад
Just great mod, thanks can’t wait to upgrade mine
@adaminjp
@adaminjp 6 месяцев назад
You wouldn’t happen to have a part list for home depot would you? I would love to do this for my popup camper.
@kevincarpenter955
@kevincarpenter955 Год назад
Thanks to you, I made this on my pig cooker! It works awesome!
@joebishop7909
@joebishop7909 Год назад
Great idea, thanks
@gailharkrader2597
@gailharkrader2597 Год назад
Found it. Thanks. My next project
@warrenburke9137
@warrenburke9137 Год назад
That is brilliant.. I’m stealing this idea and using it on my trailer. Thumbs up
@fatsdulange
@fatsdulange Год назад
Thank you, thank you, thank you. Just made this hot dogger (hot dog cart owner) extremely happy. 😎
@rossherald3967
@rossherald3967 5 месяцев назад
yahoo good job thanks for sharing , made a buncha people easier trailering
@kevincarpenter955
@kevincarpenter955 Год назад
I even put a set of bicycle grips on
@vidge123
@vidge123 11 месяцев назад
outstanding!
@jeremywheeler2122
@jeremywheeler2122 11 месяцев назад
I came looking for big wheels for a trailer jack. I left seeing away to pull my trailer with its big wheels. You made a great idea even better. I don't even have my trailer yet, but I'm excited to put this mod on it when I get it.
@JsCrazyCutzLLC
@JsCrazyCutzLLC Год назад
Genius idea 😃☝👍
@2ndshiftaudio300
@2ndshiftaudio300 Год назад
I'm working on making this for my 20' pontoon boat right now. But, the boat is a little heavier. So I'm drilling the wheel axle holes on the jack to 5/8" And using a 5/8" axle. It will make rolling even easier. And more precise. I think. I'm also gonna weld up a trailer latch for my atv to move it around. I use the atv in tight spaces. Thanks for the design. I'm just beefing it up a little.
@tigerace351
@tigerace351 4 месяца назад
I’d like to see how easily you were able to move your boat. I need to do the same for my 17’ bowrider but thinking it might be too heavy, plus I have to move mine over packed dirt in an alley. I’ve seen 3-4 people all help push while 1 guy at the front steers on the original plastic wheel on smooth concrete. Do you think same could be done with this mod, maybe 12” wheels? 1 guy steers and pulls while 3 at the back push? My boat is 1,800 lbs with an aluminum trailer. Don’t know total but I’d guess right at 2,000. I need to do this to get boat nose in, into my back yard to service it. Thanks.
@chrischurch4551
@chrischurch4551 Год назад
I suck backing my trailer into my yard. It's a tight alley. I'm doing this 100%
@rebeccaboyette866
@rebeccaboyette866 Год назад
We just got an old home made boat trailer that is missing the jack wheel....I'm so doing this to it! Thanks for the video, from Locust Grove, Ga😊
@stuartfact8361
@stuartfact8361 10 месяцев назад
This is a great idea, thanks for sharing!! I’d love to use it, but I park on a pretty steep incline and need a solid foot to secure the trailer to keep it from rolling. I guess I could have two jacks, but that is just more complicated.
@gigmaresh8772
@gigmaresh8772 6 месяцев назад
2 of those little yellow wheel chocks . . . And connect them together with cheap dog chain just far enough apart to snug the tires, then a length to bolt them to the frame
@gigmaresh8772
@gigmaresh8772 6 месяцев назад
Will be great on my Boler camper 😊
@brettbret8836
@brettbret8836 2 месяца назад
Brilliant idea exactly what I was looking for. Thank you so much. Did you get a chance to try out the 12-in wheels?
@GwinnettLawns
@GwinnettLawns 2 месяца назад
No not yet.
@robbypro3370
@robbypro3370 8 месяцев назад
That's awesome. You should have patented it if it's not out there yet?
@neverstopneverstopcruising
@neverstopneverstopcruising Год назад
Great video....I'd be interested in seeing how you mounted that spare tire
@GwinnettLawns
@GwinnettLawns Год назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-d-WtdBUbd4s.html
@neverstopneverstopcruising
@neverstopneverstopcruising Год назад
@@GwinnettLawns THANKS!
@flyermike2029
@flyermike2029 3 месяца назад
I'm just worried about always having flats, my luck hasn't been great with those pneumatic wheels.
@muleclem1168
@muleclem1168 3 месяца назад
Where did you use the pvc pieces?
@tweety3616
@tweety3616 Год назад
Very nice can you do it with a Harbor freight trailer jack?
@GwinnettLawns
@GwinnettLawns Год назад
Should be able to do it.
@elizabethliz1988
@elizabethliz1988 17 дней назад
How would I add this to a trailer jack that doesn’t have a wheel at all ?
@elizabethliz1988
@elizabethliz1988 17 дней назад
Your parts list is not a list used in this video?
@narkfam958
@narkfam958 5 месяцев назад
To build the modified off-road capable trailer dolly, the presenter used the following parts: 1. **10-inch long, half-inch size bolt**: Serves as the axle for the new wheel setup. 2. **Lock washer**: Used to secure the bolt and prevent it from loosening. 3. **Nut**: Fits onto the bolt to secure the wheel assembly. 4. **Four flat washers**: Placed at various points in the assembly to ensure smooth operation and distribute pressure evenly. 5. **Two pieces of half-inch PVC**: Used as spacers to ensure the wheel aligns properly and rotates freely. 6. **Two half-inch black iron pipe nipples**: Threaded on both ends, these serve as part of the handle assembly for maneuvering the dolly. 7. **Two half-inch malleable tees**: Used in the handle assembly for grip and leverage. 8. **One five-foot piece of black iron pipe**: Threaded on both ends, forms the main handle for pushing or pulling the trailer. 9. **10-inch pneumatic wheel**: Chosen for its size and air-filled design to smoothly navigate over uneven terrain and obstacles. 10. **Copper or black iron spacers**: Additional spacers for precise wheel fitting and rotation. These materials were selected for their durability, availability, and the practicality of assembling a robust off-road trailer dolly. The emphasis was on using standard parts that can be easily sourced from home improvement stores like Home Depot or Lowe's.
@DevilDog-HellHound
@DevilDog-HellHound 3 месяца назад
Narkfam great job. What are the complete measurements? 1/2 inch by what
@jacksontraynor
@jacksontraynor 6 месяцев назад
can u make a list of the parts and length need, thank you
@GwinnettLawns
@GwinnettLawns 6 месяцев назад
In the video, I tell you exactly the size and the length of each piece.
@DevilDog-HellHound
@DevilDog-HellHound 3 месяца назад
It just says 1/2 inch. Like the pvc spacers. 1/2 inch by what
@reggieshannon1837
@reggieshannon1837 7 месяцев назад
Sir..... how big are those spacers??
@GwinnettLawns
@GwinnettLawns 6 месяцев назад
They’re about an inch but if you watch the video I tell you depending on the wheels you’ll have to play around with it a little bit and also it’s going to depend on what brand of Jack you originally got for the trailer so it’s going to vary.
@Ollywood00
@Ollywood00 Год назад
What was the PVC spacers the used for?
@GwinnettLawns
@GwinnettLawns Год назад
I was going to use them, but decided to use the copper spacers instead.
@Ollywood00
@Ollywood00 Год назад
@@GwinnettLawns did you use copper pipe?
@GwinnettLawns
@GwinnettLawns Год назад
@@Ollywood00 yes look at the five minute mark on the video.
@jamesspringate8431
@jamesspringate8431 8 месяцев назад
@@GwinnettLawns What is the length of these spacers?
@jesser3203
@jesser3203 9 месяцев назад
How much did this cost? Tires from Harbor Freight?
@jesser3203
@jesser3203 9 месяцев назад
Thanks for thumbing it up. How about the cost? Tires from HFT?
@shanew7361
@shanew7361 Год назад
🤌👌
@user-nx1sy1kk1x
@user-nx1sy1kk1x 6 месяцев назад
Doesn’t work when you have a load on the trailer
@GwinnettLawns
@GwinnettLawns 6 месяцев назад
You’re not supposed to roll around the trailer with the load on it.
@omahajim22
@omahajim22 3 месяца назад
@@GwinnettLawns curious how well this would work for my Meerkat Travel Trailer. It’s about 1200#. Can’t “unload” it like you do your utility trailer. Plus I have about a 4° driveway slope. Been looking at a Trailer Valet RVR3 because of the slope.
Далее
How to adjust Kawasaki Valve Clearance...EASY DIY
16:13
Can I Use a Regular Dolly as a Trailer Dolly?
7:08
Просмотров 26 тыс.
This or That 🛍️
00:52
Просмотров 9 млн
Tom🍓Jerry 😂 #shorts #achayanarmyfamily
00:14
Просмотров 14 млн
Jack Stands, Proof Of Concept - Band Sawmill Build #4
12:57
Trailer Dolly - Is it Worth It?
11:57
Просмотров 244 тыс.
Trailer Dolly
4:36
Просмотров 7 тыс.
Can This Tool Can Move A 30,000lb Trailer?
17:32
Просмотров 44 тыс.
Honda HRX 217 BAD Oil Leak Repaired  Super EASY Fix
11:07
Probably The Best Homemade INVENTION 2021
11:12
Просмотров 42 тыс.
This or That 🛍️
00:52
Просмотров 9 млн