Тёмный
No video :(

Tutorial: using the Needle Point Laser on the BERNINA Q 24 or Q 20 longarm quilting machine 

BERNINA International AG
Подписаться 89 тыс.
Просмотров 17 тыс.
50% 1

In this video tutorial you will learn how to attach, activate and use the Needle Point Laser. With the Needle Point Laser, you will be able to accurately place the needle without guesswork or using the handwheel! Our video instructions show step by step how to attach the Needle Point Laser, how to change the settings of the laser on screen, how to program the toggle switches (frame only) and, finally, how to put this great tool into action. The Needle Point Laser is perfect for free-motion quilting, ruler work and appliqué. It is also a great help when placing designs with Q-matic.
Do you want to find out more about the BERNINA Q 24 or BERNINA longarm quilting accessories? Then visit us at www.bernina.com/longarm - we look forward to your visit!

Опубликовано:

 

22 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 10   
@dianen420
@dianen420 3 года назад
Great video. Very clear! Thank you, Bernina!
@angelagillard3508
@angelagillard3508 5 лет назад
Unreal,,,,👍🏼👍🏼👍🏼👍🏼👍🏼
@jackielundstrom647
@jackielundstrom647 3 года назад
I have the q20 and the laser. I cannot keep the light focused on the correct spot. It keeps moving. How to prevent this? Thank you.
@BerninaInternational
@BerninaInternational 3 года назад
There are two screws you need to tighten in order to prevent that the laser light moves during operation. One screw tightens in the back-front direction, the other on in the inward-outward direction. Usually a good hand-tightening is sufficient.
@user-xq5md1ld3d
@user-xq5md1ld3d 10 месяцев назад
Can I install this on my Q16 Plus?
@BerninaInternational
@BerninaInternational 10 месяцев назад
Thanks for asking. Yes, the Neede Point Laser ist compatible with your Q 16 PLUS.
@lynnlane1624
@lynnlane1624 3 года назад
I cannot get the cable plugged into the slot. Which direction? Arrow (on cable plug) pointing out towards back of machine or towards front of machine?
@BerninaInternational
@BerninaInternational 3 года назад
Hi Lynn, when plugging in the cable you should see the arrow on the plug, see blog.bernina.com/en/wp-content/uploads/sites/4/2021/05/arrow.jpg
@lynnlane1624
@lynnlane1624 3 года назад
@@BerninaInternational when I went back with flash light and looked at receptacle for plug, I think that the receptacle for the plug is pushed up so the plug is not seating in place. Does that make sense?
@BerninaInternational
@BerninaInternational 3 года назад
@@lynnlane1624 Dear Lynn, unfortunately, this sounds like a defect. If you can't move the plug into the correct position, please contact your dealer. We are afraid that the machine will have to be serviced.
Далее
Bernina Q20 Demo
8:15
Просмотров 19 тыс.
▼НОВЫЙ FNAF (мы в пицце) 🍕
29:32
Просмотров 581 тыс.
Simple Flower Syrup @SpicyMoustache
00:32
Просмотров 1,4 млн
Italians vs @BayashiTV_  SO CLOSE
00:30
Просмотров 5 млн
Easy BERNINA Qmatic Tutorial
16:19
Просмотров 27 тыс.
BERNINA Q Series Threading
3:57
Просмотров 18 тыс.
Set up and get started on a Q20 Quilter
12:25
Просмотров 24 тыс.
Bernina 990 Demonstration
32:12
Просмотров 368
Bernina Q24 and Q20 | Computer Walkthrough
7:46
Просмотров 6 тыс.
QITV Presents BERNINA Q Series Sit Down Mastery 2
31:44