Two Painting Techniques Explained

Подписаться 168 тыс.

Просмотров 55 тыс.

50% 1

Painting small details does not have to be hard. These projects only take a few minutes to paint.
Comments or questions My email is:
PawPawsWorkShop411@gmail.com
Help support my channel Patreon:
/ pawpawsworkshop
Link to Laser: jtechphotonics...
Link to Z axis and CNC machine kits and parts for DIY CNC
cnc4newbie.com
Demon Controller By Designs by Phil:
cnc4newbie.com...
WOW! 15% OFF offer. Used the code below to take advantage of this fantastic offer.
Affiliate Link to Purchase STARBOND GLUE:
15% OFF PROMO CODE pawpawsworkshop15
www.starbond.com?rfsn=2376834.ca9c16
_______________________________________________________________________________________________
AMAZON AFFILIATE LINKS:
As an Amazon affiliate I earn from qualifying purchases:
Link to My Amazon Affiliate Store:
www.amazon.com...
Frequently needed supplies:
Replacement brushes for DeWalt 611 Router: amzn.to/2Sknovz
DeWalt 611 Router: amzn.to/2Sp7H6l
90 degree v-bit: amzn.to/2WspRDf
60 degree v-bit: amzn.to/2sYTK0k
Freud bottom cutting bits: amzn.to/2H30R00
Router Bit Set: Router Bit Set 1/4" Shank: amzn.to/2G4iQDH
Oramask 813 12"x10' Roll amzn.to/2VrrUe5
Oramask 813 12"x20' Roll amzn.to/2ViovxQ

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 111

@Dmc-jq4vi Год назад

Paw Paws voice is so relaxing. Thanks for the video!!!

@PawPawsWorkShop Год назад

You’re very welcome. Thanks for watching

@debmurray52 3 года назад

Pawpaw, I can not thank you enough for your tips about using markers! I never even thought about using them on wood. I made a bit of an error programming some text and thought my sign was headed for the trash. I used a black marker to highlight the shape of the letters and it was magic! Absolutely saved the day!!!!

@PawPawsWorkShop 3 года назад

Awesome! You're so very welcome. I'm glad that I could help you save the project.

@jeffdavis9892 Год назад

Great project... I like the design. I found the paint on soft woods, bleeds into the sides of the cut when painting the letters or design. This can be prevented by giving the finished cutting board a spray of clear lacquer. That stops the paint leaking into the sides of the cut letters or design when applied. Love your videos.

@PawPawsWorkShop Год назад

Thank you. Often just a spray coat of clear is not enough to completely seal the wood. I have found that I have had more success with brushing on the sealer

@sylviacook2005 2 года назад

got a tip, bought vinyl flooring double sided tape in a roll only used 2 at 2 in by 1 in one on each end the wood stuck fantastic it also came off nice worked fantastic

@PawPawsWorkShop 2 года назад

Awesome! Thanks for the tip

@doaparanormal 3 года назад

I always learn so much from you. I tell everyone to watch your video that is getting started. Hope you have a Happy Thanksgiving....

@PawPawsWorkShop 3 года назад

I appreciate that! Thank you very much.

@pj6579 2 года назад

Great tutorial, thank you!! I am absolutely trying this today 🤗 x

@PawPawsWorkShop 2 года назад

Awesome! Best of success to you

@harldave9850 3 года назад

That is absolutely awesome

@PawPawsWorkShop 3 года назад

Thank you very much.

@woodworkingDad64 Год назад

Thanks for the tips!

@PawPawsWorkShop Год назад

You’re welcome. Thanks for watching

@burtgraham3689 22 дня назад

nice work on the christmas ornament - would you be willing to share the design. I would like to give some as gifts for christmas this year

@Arlisa1913 2 года назад

Here to help so I liked it 😊

@PawPawsWorkShop 2 года назад

Thanks

@charlestreadway6491 3 года назад

I love the Military plaques.

@PawPawsWorkShop 3 года назад

Thank you very much.

@charlestreadway6491 3 года назад

@@PawPawsWorkShop How much do you sell the Marine plaques for

@gemstonemine420 3 года назад

Thanks

@PawPawsWorkShop 3 года назад

You’re welcome

@ayotaamer 3 года назад

Very nice 💐❤️🇮🇶

@PawPawsWorkShop 3 года назад

Many many thanks

@Ron_DeForest 2 года назад

Couple of questions. Hand colouring the ornaments, what would you charge for such a thing to account for your time? Next, have you ever etched a photo into wood? I saw a one with various shades of burn but never saw a process.

@PawPawsWorkShop 2 года назад

Never thought about it. I do not sell these. Will be doing photo engraving shortly.

@i8skeerd 3 года назад

thank you for sharing, was wondering why you started in the bottom left corner instead of the center of the project like I see you do normally?

@PawPawsWorkShop 3 года назад

Only trying to show a various way to do it. I do not want to do it the same all the time. This gives the opportunity for more people to see different ways to accomplish the same task.

@richarddenton8928 Год назад

Cool stuff

@PawPawsWorkShop Год назад

Thank you. I appreciate you watching my videos

@JustinTyme1966 3 года назад

Thank you for taking the time to make this video, could you please do a review on your X-Carve. Im trying to decide which cnc router to get. I was wanting to get a Onefinity but Im not going to wait 3-6 months for them to fill my order.

@PawPawsWorkShop 3 года назад

I also have a CNC4newbie New Carve and I love it. It is about the same price as the XCarve and is much stronger and a lot more robust. It is a fantastic machine and you can run Easel is you wish or us UGS as I do.

@steveluke478 2 года назад

Sorry you are having issues with utube. Thanks for this video its grat nd i will share it to help. Cheers

@PawPawsWorkShop 2 года назад

All good with RU-vid. You’re very welcome. Thank you very much for watching and sharing

@curtboehmer510 3 года назад

Hope you had a good and safe Thaksgiving. Is there anyway you could share the old truck in Easel or add a link to it on here. I would like to try making it but couldn't find it Easel. Thanks

@PawPawsWorkShop 3 года назад

Thank you very much and I hope that you had a great Thanksgiving as well. As I said in the video that this is not my design. I obtained it from someone at Inventables either on the forum or on the project page. I also asked for the person who shared the design to please let me know so that I can give proper credit and get permission to share.

@jimshackelford4267 2 года назад

I guess this is going to be a project in future

@PawPawsWorkShop 2 года назад

There will be always new videos and different paint techniques

@merrillalbury8214 Год назад

Do you cover the ornament with a clear coat?

@PawPawsWorkShop Год назад

Yes, I use clear gloss in a spray can

@samxlovegod 2 года назад

👍👍👍👍👍👍👍👍🙏wonderful!

@PawPawsWorkShop 2 года назад

Thank you very much

@dgoins6 2 года назад

With the Christmas tree truck, could I just laser engrave it then paint? I'm assuming a couple of passes for depth. Thanks!

@PawPawsWorkShop 2 года назад

Yes you can do that

@dvr4337 2 года назад

Like your videos. What type of laser engraver you have? You may want to give us some details about it. Thanks much

@PawPawsWorkShop 2 года назад

The is sign was the Inventables XCarve CNC machine.

@BrettBebout Год назад

Still being viewed!

@dasfreakster Год назад

Awesomw video as always. Where can I find that center finder?

@jessicapage6701 2 года назад

What is on your table saw? It looks like it would make it safer. I want to do things with wood but am so afraid of the saw I have to ask my husband to make my cuts for me.

@PawPawsWorkShop 2 года назад

I have a table saw sled and I added dust collection to it also. Yes, this addition will certainly help to keep your fingers safe. I also recently added a dedicated dust collection and saw guard to my table saw. This is by Pennstateindustries

@freckles2842 3 года назад

It looks like you are using a vbit? What did you select in Easel for your bit since you have to have pro to select those?

@PawPawsWorkShop 3 года назад

I have four free days per month of Easel Pro. I used one free day. Old account holders have the four free days per month.

@lahaza6515 6 дней назад

You are so detailed! I bet you do everything in a thorough way in life.

@PawPawsWorkShop 6 дней назад

Thank you very much

@40mick 3 года назад

Nice job! Was it intentional not to center the wreath in the circle?

@PawPawsWorkShop 3 года назад

Yes! Thank you!

@danilleillyasaville8175 3 года назад

So if you sand it after what's the point of shellacing first?

@PawPawsWorkShop 3 года назад

It seals the wood. When you paint the project, the over paint sticks to the shellac and not so much the wood.

@rickmccaskill7888 3 года назад

I would like to make the truck plaque since I have a 1951 Chevy truck. You said the file came from Vectric. I signed on my account and can’t find the file. Could you point me to the download? Thanks for sharing.

@PawPawsWorkShop 3 года назад

The file came from the Inventables forum or the Inventables Project page. This is not my design and I am uncomfortable sharing someone else's file. I have ask for the person to come forward so that I can give proper credit and get permission to share.

@rickmccaskill7888 3 года назад

@@PawPawsWorkShop thanks I understand. I will check Inventables for the file.

@loganfreeman8237 2 года назад

great but you forgot to center it to the ordament before you engrave it otherwise it is a very good work and the idea with the markers i like very good.But make from them 100 pieces and it will take a very long time.Then you want find a way to fill those out with color faster.

@PawPawsWorkShop 2 года назад

There is always another way to complete a project based on the specific need. If I had a 100 to do I would cut a stencil for each color and spray them. You could even screen print them. Your imagination is your only limitation. That what makes this such so exciting. Each project is different. Thanks for sharing.

@dalepaladin916 Год назад

I think you should have kept the two projects separate, Because by the time you were getting through the cutting machine project I fell asleep. Sure seems like one was easier and shorter to do then the other and you should have just done one video for each.

@bubba6945 2 года назад

why cant you just surface that paint off the board with the cnc router. .005 depth per pass til its cleaned up

@PawPawsWorkShop 2 года назад

Yes, you can do that also

@sylviacook2005 2 года назад

hi how do i activate useing easil to get 4 free pro days?

@PawPawsWorkShop 2 года назад

If you are just opening an account you only hav a 30 day trial period of the pro version. Inventables no longer offers four free days to new account holders.

@sylviacook2005 2 года назад

@@PawPawsWorkShop i called then he gave a a nother month free i did not know it auomaticly gave me a tril so i did not use it but they have a fantastic suport

@ohske 3 года назад

😯👍👍👍👌❤❤❤

@PawPawsWorkShop 3 года назад

Thank you

@joshuaklind Год назад

Should have made the wreath bigger and put the year in the center.

@PawPawsWorkShop Год назад

Great idea, I’ll do that next time

@artbyzuzu4114 3 года назад

Like 👍Qreat

@PawPawsWorkShop 3 года назад

Thank you very much.

@GeppettoCreations 3 года назад

Subscribed & liked! Would you share the vector file for the Merry Christmas Truck design?

@TheFalconJetDriver 3 года назад

That is really nice! since i do not have a CNC router I may give this technique a try using my laser to create the relief, I have zero artistic abilities when it comes to drawing.

@PawPawsWorkShop 3 года назад

The laser will work just fine. In fact, you will be able to get even more detail.

@TheFalconJetDriver 3 года назад

I am going to give it shot this evening, Thank You.😁🛫

@Silent-G 3 года назад

I’ve been inspired by your x carve videos and learned so much that I bought one today, I may ask a question now and them! Thanks for giving me the courage to try my hand at this

@PawPawsWorkShop 3 года назад

Wonderful! Welcome to the community. I will help you in any way that I can.

@harldave9850 3 года назад

Happy Thanksgiving to you all south of our Canadian boarders.

@PawPawsWorkShop 3 года назад

Thank you very much.

@lunnymav 3 года назад

That was a new way to start a video. It’s kinda nice.

@PawPawsWorkShop 3 года назад

Thanks

@shannonmarie6227 2 года назад

Love your channel. More painting tips & cnc and laser projects! 🙏🏼😀

@PawPawsWorkShop 2 года назад

Thank you very much. Yes, I will be doing more. I’ll also be adding epoxy inlays soon

@Silent-G 3 года назад

Hope you’re having an awesome Thanksgiving!

@PawPawsWorkShop 3 года назад

You too! Thank you very much.

@randallthompson9149 2 года назад

Paw Paw, I wish you were my neighbor, You are a great teacher! What I like best, you are straight to the point. Very Professional. With your Videos, I am able to train myself and others how to create Signs and more.

@PawPawsWorkShop 2 года назад

Thank you very much. Very kind words. I’m glad the videos have helped you

@barrychandler826 3 года назад

I need the military files of ones hanging on the wall 2 of my sons and me served and we was in different branches where to find them that have G codes

@PawPawsWorkShop 3 года назад

I just started with the images from Google and developed the file from there.

@DanSchnieders Год назад

Hey Phil, really enjoy what you do. You're a most creative and talented fellow. I have an x-Carve and have crawled all over the site trying to find the image of the red truck with the Christmas tree and can't seem to find it. Can you advise how I might find it a little easier? I'm assuming it remains publicly available. Hate to bother you with this but am really interested in carving it for some friend that like old country trucks. Thanks in advance. PS: I researched Inventables Forum again and finally found it. Not sure how I missed it the first time. The guy you want to credit is Chuck Lyons and he posted in December 2018.

@PawPawsWorkShop Год назад

I’ll look to see if I still have the file. I don’t keep all the files

@DanSchnieders Год назад

No worries, I found it in the Forum so no need to look. In fact, I just finished carving it tonight and will paint tomorrow.@@PawPawsWorkShop

@josephwilliams2502 3 года назад

I am looking into a GlowForge pro. Do you have any experience with Glowforge and if so what is your opinion; I really respect your opinion. Thanks.

@PawPawsWorkShop 3 года назад

I’m sorry, I do not have any experience with the Glowforge. I’ve only seen the videos and the commercials as you have I’m sure

@josephwilliams2502 3 года назад

@@PawPawsWorkShop Thanks.

@MrLaroygetz 3 года назад

PawPaw, I notice my rotor is moving a lot on my original xcarve. Does xcarve sell that upgrade that you have holding your Dewalt?

@PawPawsWorkShop 3 года назад

It sounds like the v wheels are worn out. No, Inventables does not sell the upgrade z axis that I have on the machine. My upgrade is from cnc4newbie.com.

@MrLaroygetz 3 года назад

@@PawPawsWorkShop I’m going to have to upgrade. My other question is when you do a two bit sign, (not cheap) only us older guys would get that. Two layers on a sign with 2 different bits, will the machine automatically stop so you can install the next bit?