Let’s Carve This Simple 3D Eagle on the CNC

Подписаться 165 тыс.

Просмотров 420 тыс.

50% 1

I am going to show using VCarve Pro how easy it is to carve this simple 3D project. Basic steps to get you carving quickly.
This channel in part is funded by viewers like you. Please help me continue to creating videos by becoming a patron.
/ pawpawsworkshop
You can also support my channel through Paypal
www.paypal.me/pawpawsworkshop
Comments or questions My email is:
PawPawsWorkShop411@gmail.com
Link to Laser: jtechphotonics.com
Link to Z axis and CNC machine kits and parts for DIY CNC
cnc4newbie.com
Demon Controller By Designs by Phil:
cnc4newbie.com/store/en/demon...
WOW! 15% OFF offer. Used the code below to take advantage of this fantastic offer.
Affiliate Link to Purchase STARBOND GLUE:
15% OFF PROMO CODE pawpawsworkshop15
www.starbond.com?rfsn=2376834.ca9c16
_______________________________________________________________________________________________
AMAZON AFFILIATE LINKS:
As an Amazon affiliate I earn from qualifying purchases:
Link to My Amazon Affiliate Store:
www.amazon.com/shop/pawpawswo...
Frequently needed supplies:
Replacement brushes for DeWalt 611 Router: amzn.to/2Sknovz
DeWalt 611 Router: amzn.to/2Sp7H6l
90 degree v-bit: amzn.to/2WspRDf
60 degree v-bit: amzn.to/2sYTK0k
Freud bottom cutting bits: amzn.to/2H30R00
Router Bit Set: Router Bit Set 1/4" Shank: amzn.to/2G4iQDH
Oramask 813 12"x10' Roll amzn.to/2VrrUe5
Oramask 813 12"x20' Roll amzn.to/2ViovxQ

Хобби

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 385

@toumahadad501 3 года назад

Thank you for all the information That you give. Valuable and very helpful for beginners

@PawPawsWorkShop 3 года назад

Glad it was helpful! You're very welcome

@sfg18b 11 месяцев назад

It can out great. I read one comment about the cost of the software. I said that to, after reading on it, I purchased it. You get what you pay for. Trust me. It will raise you game.

@jeffjaekel2558 Год назад

Cool! Nice job explaining and showing the process!

@PawPawsWorkShop Год назад

Thank you very much

@motoputz3201 2 года назад

thanks, great learning tool for me 19:27 pre-drilling is key for holding work piece in position and the spoil board surface won't get those annoying screw bumps and lengthen the spoil board's usefulness.

@PawPawsWorkShop 2 года назад

Yes, excellent idea

@Evocatorum 2 года назад

@@PawPawsWorkShop If you go back and look at 21:09, you can see that the side on the project isn't flat either because the wood is slightly bowed or because the particle board below isn't level with the rest of the table. It would appear that the particle runner isn't tied down completely or perhaps there's something under it? I can't tell. Either way, thanks for taking the time to make this video for us!

@dusanrajh5025 7 месяцев назад

Hvala za predstavitev.

@jaimevillada9150 3 года назад

Desde Colombia , gracias por compartir.

@PawPawsWorkShop 3 года назад

gracias!

@TheJosa007 3 года назад

It is amazing what you can do with a little bit of knowledge. The eagle piece is truly amazing. It's got to be a total satisfaction to look at what you have created.

@PawPawsWorkShop 3 года назад

Thank you very much.

@brendanfitzpatrick7399 2 года назад

yeah, with a little knowledge you can basically print or cut a test page..bravo! sorry but i was hoping for so much more in this video.. I don't have a CNC but even if i did, i wouldn't have much interest in printing ("cutting") a piece of clipart from within the application, all CNC software provide the same examples as a 'test print'.. it would have been 10x more valuable if he used a generic image outside of the clipart to really show how to do something unique . .

@ndoghouse6853 Год назад

@@brendanfitzpatrick7399 Believe me if you just got a machine setup from scratch and did all the wiring etc then you dont give a crap about value or where your test piece came from. You just want to make sure your machine works as intended and with your choices of the many softwares you decided to use to create it. Have you ever printed a test page from a new printer? Well thats all it is. Frankly a 3D eagle in wood beats the hell out of a sheet of paper your gonna throw in the trash anyway.

@johnparken2607 10 месяцев назад

With all due respect to Ms Fitzpatrick, your video is exactly what I wanted and what I expected. It is a step that needs to be taken in my learning process. This is all new to me. Kudos to you for taking the time (yours and ours) to clearly explain the steps that you were taking. That will enable me to perform a similar on my computer and CNC as I progress in the process of properly using these powerful and innovative new tools. The pace was certainly not too slow. THANKS so very much.

@patrickreade6119 5 месяцев назад

He created nothing a computer and a machine created it. Come back when he carves something by hand. No real talent needed to do this.

@metalheadmachining4586 2 года назад

Enjoyed the video, been a machinist for years and recently got a Laguna IQ and Aspire with vcarve and your fixing to gets some views here hehe nice explanation of software.

@PawPawsWorkShop 2 года назад

It Is my pleasure to help. Congratulations on your purchase. Thank you very much

@robertlaurendeau9394 Год назад

Well done PAW PAW!

@PawPawsWorkShop Год назад

Thank you very much and thanks for watching

@johns2926 3 года назад

Instead of dragging the corner of the stl to resize and re-centering with the button you can hold shift while dragging the corner of the image to resize and it will keep the image centered. Saves you a bit of time.

@PawPawsWorkShop 3 года назад

Excellent point. Thank you very much.

@alwellenweremadu7564 2 года назад

Please, are you good at creating STLs? I need the services of an expert.

@THirstyCamel1023 3 года назад

Awsome carve

@PawPawsWorkShop 3 года назад

Thank you very much.

@lunnymav Год назад

So beautiful. Nice project.

@PawPawsWorkShop Год назад

Thanks

@ashkanseifi5413 3 года назад

Loved your video. thanks for sharing.

@PawPawsWorkShop 3 года назад

You’re very welcome

@matthewschatzel6900 3 года назад

Great work paw paw

@PawPawsWorkShop 3 года назад

Thanks! 😄

@jimking9646 3 года назад

My ShopSabre is coming next Wednesday cant wait.. Great video

@PawPawsWorkShop 3 года назад

Awesome! Have fun.

@rocketsurgeon4876 3 года назад

@@PawPawsWorkShop Where do you sell the items you make?

@rrr92462 Год назад

Excellent demo.

@PawPawsWorkShop Год назад

My pleasure. Thanks for watching

@consultor1019 3 года назад

Great work and video

@PawPawsWorkShop 3 года назад

Thank you very much!

@ridhadababi5858 2 года назад

. Good job, Thanks for sharing.

@PawPawsWorkShop 2 года назад

You’re welcome

@mancaveprinting 3 года назад

Hello Paw Paw, I am getting into CNC carving and like your video. Maybe this is helpful for you: You can make a screencast by hitting Windows+g together. So you do not have to pay attention to lighting and get rid of the flickering.

@PawPawsWorkShop 3 года назад

Yes, that will work and I have tried it however I can not bring that file into my editing software

@fenders9911 3 года назад

very nice job great lesson !!!

@PawPawsWorkShop 3 года назад

Thank you

@TheJonboix 2 года назад

I liked and am subscribed Thank you for sharing your knowledge

@PawPawsWorkShop 2 года назад

Thank you very much. I appreciate your support very much.

@sylviacook2005 2 года назад

thanks for this fantastic video

@PawPawsWorkShop 2 года назад

My pleasure.

@bentebrunsvelt319 3 года назад

Beautyfull job

@PawPawsWorkShop 3 года назад

Thank you! 😊

@uncommenvideo5443 3 года назад

excellent video

@PawPawsWorkShop 3 года назад

Many many thanks

@daneilers739 3 года назад

As usual, GREAT job!!!

@PawPawsWorkShop 3 года назад

Thanks again! I appreciate this very much.

@they.luv_lillard4477 3 года назад

Great vid

@PawPawsWorkShop 3 года назад

Thank you very much

@rodneywright284 3 года назад

Good Job, can't wait until you get into more 3d settings

@PawPawsWorkShop 3 года назад

Thank you, I'll be coming out soon with another one.

@torowazup1 3 года назад

Just shared it before I watch video 👍🏼

@PawPawsWorkShop 3 года назад

You're the best! I appreciate that very much.

@richarnaud7794 3 года назад

Good Video..Thanks

@PawPawsWorkShop 3 года назад

You are welcome

@mfrederickson1 5 месяцев назад

Great video - thanks

@PawPawsWorkShop 5 месяцев назад

Glad you enjoyed it

@jimking9646 3 года назад

Great info

@PawPawsWorkShop 3 года назад

Thank you very much.

@bullswoodworks8398 3 года назад

like and Subbed. great video. playing with my Shapeoko XXL and still learning......your videos help. TY!

@PawPawsWorkShop 3 года назад

Thanks for the sub! Awesome! Thank you very much.

@juansalmeron1537 3 года назад

Looks great paw paw

@PawPawsWorkShop 3 года назад

Thank you 🤗

@juansalmeron1537 3 года назад

Paw paw is this file shareable on inventables?

@PawPawsWorkShop 3 года назад

This file is on the Vcarve desktop or pro version when you purchase the software.

@rpremkumarjones1928 3 года назад

superb sir thank you

@PawPawsWorkShop 3 года назад

You're welcome

@davidholdman8015 3 года назад

Awesome

@PawPawsWorkShop 3 года назад

Thank you

@user-ig4mg7go1s Год назад

Fantastic video!!!

@PawPawsWorkShop Год назад

Thank you very much! I appreciate you watching my video

@user-ig4mg7go1s Год назад

@@PawPawsWorkShop Greetings from Serbia!

@sebastianocavalli1357 Год назад

Hi Paw Paw, thank you very much for the great tutorial,Thank you very much Seby

@PawPawsWorkShop Год назад

My pleasure. Thanks for watching

@ayotaamer 3 года назад

Very nice job 💐❤️🇮🇶

@PawPawsWorkShop 3 года назад

Thank you so much 😀

@Dieselfitter01 2 года назад

this is great

@PawPawsWorkShop 2 года назад

Thank you

@erdalevcil2445 2 года назад

good job

@PawPawsWorkShop 2 года назад

Thank you

@LanceMcGrew 2 года назад

Sure wish this Paw Paw was my neighbor :). I'm a Papa too :)

@PawPawsWorkShop 2 года назад

Awesome!!

@airbornearchitect7062 2 года назад

wow , LIKE that....

@PawPawsWorkShop 2 года назад

Thank you very much

@cnctroubleshooting9052 2 года назад

Hi Paw Paw, A couple quick questions… so you did it all in one pass with the 1/8” bn, so it would have been cutting fairly deep. I heard you say 8-10% step-over, so you stepped over somewhere under .0125? And might I ask your feed rate? I’m very much a novice, and as such would have thought that deep a cut would have broken the bit.

@thomgwayi8138 2 года назад

Great

@PawPawsWorkShop 2 года назад

Thanks

@TonyHall-iw2pz 3 месяца назад

Good 👍

@PawPawsWorkShop 3 месяца назад

Thank you very much

@a.poovasanthan9577 3 года назад

🔥👍

@PawPawsWorkShop 3 года назад

Thank you

@James01520 3 года назад

Phil what's the benefit to using the Z-height plate vs. just jogging the bit to the top of the material surface and setting Z that way?

@PawPawsWorkShop 3 года назад

It is more accurate to use the z plate for consistency. You can use the manual and it will work however you may be off several thousandths. For most projects that may be just fine.

@LuisLopez-gd9hu Год назад

Hello, great video tutorial!! Do you have another video but with rotary toolpath? Thank you

@patrickbodine1300 Год назад

Go ahead.

@PawPawsWorkShop Год назад

3D carving is both beautiful and fun

@dhmphoto 2 года назад

Thanks for the video. It is really helpful for me to better understand 3D carving. I do have a question. Could this be done with VCarve Desktop instead of the Pro version? I see reference to 2.5D carving versus 3D carving. Is what you showed today 2.5D?

@PawPawsWorkShop 2 года назад

Thank you very much. Yes, you can do this on VCarve desktop. This is actually 2.5 D but many people call it 3D

@kommanavikas426 Год назад

Its amazing. But how it calculates the depth of an image at different points or else we have to give manually height and depth just like priymid shape each step 1cm height

@CHITUS 2 года назад

Hi Paw Paw, thank you very much for the great tutorial. As I'm new to that usage of a CNC I might have some beginners's questions. I'm somehow confused about the different heights. Material height is 0.75 inch. After inserting the zero plane the model height (11:00) was shown as 0.593 inch. The shape height was 0.6997 (25:25) and was slightly too big. How are model and shape height linked? Thank you very much, Thomas

@chriskwakernaat2328 2 года назад

good question.. i get the one at 25:25 , he just sunk the head down lower in the wood , but the one at 11:00 is a stumper..

@tedlitz7266 9 месяцев назад

Nice vidio. Show more details if you can.

@nancyrocha7372 3 года назад

Great video, very informative. Thank you for taking the time to share your knowledge. We have been doing a lot of research to buy our first cnc machine, would you recommend the x carve pro(it will be out in a few months) or the cnc4newbies machine?

@PawPawsWorkShop 3 года назад

First thank you very much. In today's market there are many great machines. I know only what I have seen in the commercials regarding the XCarve Pro. It is a new unproven platform. I have questioned the Inventables team but I must say that I would go with the proven product and chose one of the cnc4newbies products. They are very solid and I love mine.

@brandonkrause4333 2 года назад

i would not recommend the xcarve. i just got one and i wish i would have spent another 1000 and got something a little better. the button head screws it came with for assembly are garbage. i had to re tap the holes for the dust collector brackets. this machine is veeery overpriced. i dont expect the xcarve pro is much different besides being more rigid...

@markesselstynmiller747 3 года назад

What are the 2 CNCs in the back. I see the XCarve by Inventables what is the other one that you use? Did you carve the eagle on the X-Carve or the other CNC machine? Thank you.

@PawPawsWorkShop 3 года назад

The other cnc machine is the cnc4newbie new carve. Yes, I carved the eagle on the new carve. It could have been done on the xcarve just as easy.

@zinoorr1056 2 года назад

Hey paw paw, your work is outstanding. I’m about 12 months from retirement and I want to get into CNC routing for fun and to help with local charities. Question, is there a better computer use for the software than others? Are you using a Mac or PC. I wish I could get training from someone like you! Your work is outstanding.

@PawPawsWorkShop 2 года назад

Thank you very much. Congratulations on your upcoming retirement. I use a pc laptop. To run the CNC does not take a very power computer however, if you are planning on using the same computer to design you will need a more powerful computer. You can get training from me. I have over five hundred videos that brings me into you shop anytime you wish.

@zinoorr1056 2 года назад

@@PawPawsWorkShop Thank you, I am a visual & hands on learner. I appreciate all your work. Thank you fro the speedy return. I live in NJ and have not been able to find CNC router training that makes any practical sense for me. I will dig into your work. Thanks again.

@cruftcreator 2 года назад

Great video. Is it possible to do 3d carves in easel?

@PawPawsWorkShop 2 года назад

the design will need to be done in another software such as VCarve or Aspire, save the gcode and you can send it to the XCarve

@IanStreten 3 года назад

Very very new to cnc routing. Machine being delivered tomorrow. At present trawling my way through various software tutorial packages. Have found your series very helpful with my quest for the best software product. That is Inventables Easel. Rather excitedly saw your post of the Eagles head but very disappointed that software was Vectric Vcarve. As a mere Hobbyist no way can I afford to buy the Vectric product. So is there anything available within Easel that can create a similar result? Thank you.

@PawPawsWorkShop 3 года назад

The XCarve is capable of carving this type of design. You will however need other software to create or modify. This eagle is part of the package that comes with the Vectric VCarve software.

@turbolevo8703 3 года назад

You should’ve drilled clear holes through your workpiece which would’ve prevented it lifting.

@PawPawsWorkShop 3 года назад

That would be one way to do it. Thanks.

@ThatPain1 2 года назад

This is a really good tutorial! But one question: Is there a way to use your own created depth maps? (The greyscale picture)

@PawPawsWorkShop 2 года назад

Yes, you can create your artwork in a software such as Aspire or Fusion 360

@eitantal726 Год назад

If you don't want to buy aspire, You can convert the greyscale to a model with Blender. Export as STL, and import that as a model in VCarve

@georgelucas8586 3 года назад

Changing the size and color of your pointer would make it easier to follow.

@PawPawsWorkShop 3 года назад

Ok how is that done?

@melodywarman7092 Год назад

Very nice project and nicely done. But if i want to put a circular cutout in a board how would I do it? I have the basic vcarve and not the vcarve pro.

@PawPawsWorkShop Год назад

Just put a separate toolpath on the outside and carve it out with a profile toolpath

@inspectr1949 3 года назад

Total novice at this not knowing where to get started, thank you.

@PawPawsWorkShop 3 года назад

One month ago I knew very little about 3d carving. Once you have a good understanding of VCarve then adding 3d is easy to do.

@robmaguire6689 2 года назад

Hi, Thank you very much for an excellent lesson. Can you please confirm something as I think I may have a software problem. That is …..having copied exactly every move that you made (I did this several times) I am finding that my cut time shows 09hrs 09 mins and :24 secs. Your time works out to 01hr 53 mins some odd secs so I cannot determine why that should be. Can you help please? TIA. Rob….

@PawPawsWorkShop 2 года назад

You might want to look at you stepover percent

@jimgranfor3856 3 года назад

I enjoyed the video. The minor problem with online tutorials is the video is never clear. I totally lost how you connected the vectric lines before going to g file.

@PawPawsWorkShop 3 года назад

I’m not sure what you are asking. Vectric lines? After selecting the bit and creating the toolpath you just save the toolpath and the file so that you can pull up the file at a letter time. Then save the gcode and carve. Yes, you do need to use the correct post processor. I can’t tell you which one to use due to the vast different types of machines and controllers

@musicmaze640 3 года назад

Thanks for the great intro to VCarve. Do you have a video that does both a rough and a detail cut? Also, could you have done the cut with Easel instead of UGS? Thanks again!

@PawPawsWorkShop 3 года назад

I did not do a rough cut. I only used the detail cut toolpath. The design modification has to be done in VCarve or similar program. You can use easel as the sender and carve it out.

@musicmaze640 3 года назад

@@PawPawsWorkShop I understand that you didn't do a rough cut here. I was just wondering how to do two cuts with UGS. I've done it in Easel, so I guess it's similar. Thanks!

@PawPawsWorkShop 3 года назад

It is two separate files that you run separately.

@donpierce9687 3 года назад

Great video! What CNC machine are you using in the video?

@PawPawsWorkShop 3 года назад

This project was done on the cnc4newbie new carve

@ecrist 4 месяца назад

Thanks for the video Paw Paw! But what happened to the rough cut you originally programmed?

@PawPawsWorkShop 4 месяца назад

I decided to skip the roughing pass

@jimking9646 3 года назад

Good Morning PawPaw I was just setting up to vcarve this eagle when I go to tools i picked the 1/8" ball nose it says 100"/sec is that to fast for a 1/8" bit?

@PawPawsWorkShop 3 года назад

Oh wow! That does seem fast. 100"/min makes more sense for the first time

@mikeprestigiacomo5420 3 года назад

Great project! one question I am a newbie and this may be a dumb question but here goes. Can you take that file you just created and use it in mach3 on another machine without a ton of work?

@PawPawsWorkShop 3 года назад

Mach3 runs on a difference system. I believe that once you do the design work you could save it with the correct post processor and it would work. I do not have Mach3 but there are numerous Mach3 post processors in the listing in VCarve .

@mikeprestigiacomo5420 3 года назад

Thank you for your reply

@tommc49 3 года назад

Newbie question: can you do this type carving with the FoxAlien?

@PawPawsWorkShop 3 года назад

Yes, it is possible. You're software is the main factor. Easel will not work to do this type of carving. You need VCarve or similar software.

@hangfeatphil905 3 года назад

Wondering waht the maximum width of the material you're carving can be...

@dennismcaleer242 3 года назад

Can you use V Carve Pro with the x-carve, and how much does the V Carve Pro software cost ? Thanks Paw Paw. Dennis

@PawPawsWorkShop 3 года назад

Yes, you can use VCarve Pro with the XCarve. After you create you project you can save the gcode and use Easel as the sender to carve the project. Go to Vectrics.com for pricing.

@danimade4629 2 года назад

sure you are successive man

@danimade4629 2 года назад

and use laptop screen recorder

@PawPawsWorkShop 2 года назад

Would love to. The problem is that the screen recorder is not compatible with my editing software on the iPad. If you know of a solution I welcome it

@danimade4629 2 года назад

sure i recommended for your tutorial use obs screen recorder

@ApexWoodworks 2 года назад

I notice that you're not using any form of dust collection on this carving job. Is this for photographic purposes, and if not, then could you show us what you've got for dust collection? Thanks for a great tutorial.

@PawPawsWorkShop 2 года назад

No dust collection due to camera. I seldom use dust collection on this cnc

@thefulchman Год назад

How hard would it be to carve the eagle head out of different wood and make it an inlay into the circle? I don't have a CNC yet but I'm very interested in getting one.

@PawPawsWorkShop Год назад

That’s doable. Just have to set up a cut line on the outside of the eagle. Thanks for watching

@dimbraun 3 года назад

I've got a question I hope someone with experience can help with. Are the tool paths already figured out for you when you purchase stl files? I'm hoping the stl files are like "recipes" and tool paths are already part of the file.

@PawPawsWorkShop 3 года назад

You will still need to have the software to generate the toolpaths and generate the gcode to carve the STL files.

@chuckscott4283 2 года назад

Thanks very much for the great tutorial... am considering VCarve Pro purchase for my new XCarve Pro and wondering if you had any compatibility issues with the software and your machine? T

@PawPawsWorkShop 2 года назад

No, I have never had any compatibility issues. I use easel as a stand alone solution. I also use easel and UGS together. In addition I use Inkscape and then bring images into easel. All work with no issues. I do the exact same thing with VCarve Pro. Do you have specific concerns?

@chuckscott4283 2 года назад

@@PawPawsWorkShop No concerns just wondering about compatibility with Inventables products. Just purchased a XCarve Pro and noticed you've got a lot of experience with their products. Appreciate your work and tutorials as I'm on a steep learning curve and soaking it all in. Easel looks to be a good product, but from what I can tell does not have 3D functionality as VCarve Pro.

@PawPawsWorkShop 2 года назад

Easel is good and is improving all the time. You are correct about the 3D function. You need VCarve Desktop, Aspire or Fusion 360. VCarve Desktop allows you to alter the 3D but not create the STL files

@johnjuderjahn2054 Год назад

Hi Paw Paw! Any way you could share the STL file for this eagle now that Easel has the capability? I LOVE it! Thanks!

@PawPawsWorkShop Год назад

This eagle is not my design. It is part of the artwork you get when you purchase VCarve by Vectric

@hugoramos496 3 года назад

Thats awesome! What Drill did you use?

@PawPawsWorkShop 3 года назад

1/8" ballnose

@hugoramos496 3 года назад

@@PawPawsWorkShop thank you sir. Keep up the good work! You're great

@donaldhardie3628 2 года назад

I may have missed it in the description but what CNC machine do you use?

@PawPawsWorkShop 2 года назад

I used the CNC4NEWBIE New Carve to do this one

@herger2561 3 года назад

Does VCarve have a more inexpensive option for a hobbyist?

@PawPawsWorkShop 3 года назад

Start with VCarve Desktop. That is the entry level software

@BronkBuilt Год назад

How would you go about sanding it?

@PawPawsWorkShop Год назад

If you use a very sharp bit you really do not need to sand. A little hand sanding may be needed but that’s it

@Dancopymus Год назад

Hi Paw Paw, first of all, thanks for the excellent video. I have two questions: 1) Can the Foxalien Masuter Pro CNC use this VCarve Pro software? 2) Can the Foxalien Masuter Pro CNC do that kind of service you did, as in the video? Or is a stronger spindle needed? Thank you

@PawPawsWorkShop Год назад

Yes, you can use VCarve with the FOXAlien. I use Openbuilds controller. Just save the gcode toolpaths and open in Openbuilds and run the job.

@Dancopymus Год назад

@@PawPawsWorkShop Thanks

@jmlp1368 5 месяцев назад

Wow,,,, you should tech kids at school.( you have good actitud to explain stuff like this meticulously)

@PawPawsWorkShop 5 месяцев назад

Thank you very much

@TLBxGoldenAxe 2 года назад

Gorgeous piece, sry if I missed it, but what was the depth of cut on that little ball nose

@PawPawsWorkShop 2 года назад

Thank you very much. I can’t remember exactly but depth was about .5”

@TLBxGoldenAxe 2 года назад

Cheers fella.

@jerrybarr8359 Год назад

Hi, are you using the $699 Vcarve pro or are you using the $299 version the V carve pro?

@s1040480 3 года назад

What program or software are you using and what website do you buy it from

@PawPawsWorkShop 3 года назад

This is the VCarve Pro by Vectrics. This file is part of the files that comes with the software.

@brandonkrause4333 2 года назад

dont know if you guys heard but hit the subscribe, like, and share, and he has a patreon

@PawPawsWorkShop 2 года назад

Thank you very much

@Fm-ss4uj 11 месяцев назад

Does lightburn work for cnc and laser or just for laser only ?

@PawPawsWorkShop 11 месяцев назад

Lightburn is designed for lasers. If you have a laser attached to the CNC then you most likely can control the laser with Lightburn

@q-rri-kan9811 2 года назад

Hello I want to make wooden fishing lures wit inside cavities for wire and weights and rattles I’m looking to make 2 sides; left and right Once wire and hardware inside the idea is to glue both side together to make one a one completed fish model Is it possible and what machine would you recommend Budget is short and I need to make it a bit bigger So in the mean time I would learn what I can out of your videos Thanks 🙏. Jesse

@Masis-dr5el 5 месяцев назад

❤, but kind of hard to fallow the 👉 arrow sir, can you add some yellow dot to be easy to eye to follow

@oldNavyJZ Год назад

The roughing pass isn’t to save time. It is to save the life of your smaller bit.

@byronsecond85 3 года назад

Whats the name of the program to make the images 3D ready for the CNC?

@PawPawsWorkShop 3 года назад

This is Vectric VCarve Pro. The desktop version will do the same

@nicholasaloi107 2 года назад

How do you get the 3d eagle? Is it something I can get from your video so that I can try it.

@PawPawsWorkShop 2 года назад

The 3d eagle is part of the VCarve software by Vectric. When you purchase the software you will get the eagle and much more.

@Kilroy1225 3 года назад

How about posting the easel file on the inventible site?

@PawPawsWorkShop 3 года назад

This eagle is part of the file provided when you purchase the Vectric VCarve Desktop. It is not part of Easel. I can not share a file that is from that company

@faroretriforce7873 3 года назад

Love this 💓 do you sell them as well? We have a American/Liberty/Freedom inspired Dining room...

@PawPawsWorkShop 3 года назад

This was the first one that I have done. I can sell them.

@faroretriforce7873 3 года назад

@@PawPawsWorkShop let me know how much for sure!

@PawPawsWorkShop 3 года назад

email me at pawpawsworkshop411@gmail.com

@faroretriforce7873 3 года назад

@@PawPawsWorkShop just emailed you

@jasonlipavsky7371 3 года назад

Any chance of sharing the eagle head file? That's really nice and I'd like to try and cut one for my shop wall

@PawPawsWorkShop 3 года назад

This eagle file is part of the collection of clipart that comes with the purchase of the Vectric VCarve, therefore, it is available to you when you purchase the software.

@jasonlipavsky7371 3 года назад

@@PawPawsWorkShop I have aspire and I haven't seen this?

@PawPawsWorkShop 3 года назад

It should be in the clipart file or it may still be in the library that you can download from the Vectric website.

@chrisscofield4944 2 года назад

Hello Paw Paw, I just received the Fox Alien 4040 -XE and finally got the Candle software downloaded. What other programs or downloads do i need to get started engraving? Love your channel by the way, excellent information... i'm just brand new to the CNC thing and need some direction.

@PawPawsWorkShop 2 года назад

You can certainly use Easel. I would also suggest Inkscape. Perhaps use UGS in place of candle. Later you may wish to get VCarve Desktop

@chrisscofield4944 2 года назад

@@PawPawsWorkShop Thanks. I was using the CNC for the first time utilizing Easel and one of their test carves. I was using a 1/8" bit and set all the parameters for the wood stock i was using and the machine went hay wire. It started at the zero position on the wood and then started going directly towards the x-axis off the wood, so i shut it down, Not sure what is going on. Any suggestions?

@PawPawsWorkShop 2 года назад

It sounds like the x,y 0 position was not established or for some reason was not saved or lost

@chrisscofield4944 2 года назад

@@PawPawsWorkShop I was using a 18" long x 6" wide x 1" thick piece of wood (pine) on the machine. Was using the test carve from the software at the time. I entered the wood dimensions in the Easel software but did not set any X.Y, 0 positions as i thought the software did that automatically. I did however set the X,Y and Z axis to zero before starting, so that may have been why it happened.