Two Seat Crosskart Build #1

Подписаться 51 тыс.

Просмотров 343 тыс.

50% 1

You've asked and here is the delivery. A two seat CrossKart that captures the compact big power of the single seaters, but still gives the room you want with a length that can be customized. New build methods make the chassis come together quickly and easily. Enjoy fabricating a fun machine in your garage and post your progress pictures on the Facebook group listed below.
Enjoy the build!
-Kyle
Plans available here:
kj-raycing.dpd...
Facebook KJ Raycing
Once you have the plans come join the build discussion
Facebook Build Group (KJ Raycing VF-1 and VF-2 Kart Builders) / 905565813954510
Instagram @kjraycing
RogueFab
www.roguefab.com/
DISCLAIMER
Videos are for entertainment only, work performed in the video should only be accomplished by a professional technician. KJ Raycing will not be held liable for ANY personal injuries.

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 181

@jesse1136 2 года назад

I appreciate all the builders/fabricators/machinists/engineers who not only leave their mistakes in their videos, but especially those who highlight them. It doesn't matter if you've done something 100 times, mistakes happen and it's not motivating or inspiring to watch content where the goof-ups are edited out. I don't speak for anyone in your audience but myself, but I find it's easier to follow along and connect with people who aren't afraid of being imperfect. I'm dying to get started on my cross kart and my kids will be stoked for a 2 seater.

@KJRaycing 2 года назад

If we never make mistakes how can we learn from them. It was an easy fix anyway, I was just so excited to get that two seater frame together! This is going to be a fun one! I can’t wait to see everyone’s builds and I can’t wait to take my little girl for a squealing ride! Thank you for the compliment.

@Arie426 4 месяца назад

Pengalaman dan belajar dari kesalahan adalah guru yang sebenarnya,jangan takut salah karena dari kesalahan itu kita bisa menjadi lebih baik,tetaplah tersenyum 😊

@kennyh5083 8 месяцев назад

Absolutely! a two seater is the ONLY way to go! Now install a 4-cylinder auto engine and transmission and then it will be right!

@dougjohnson6265 2 года назад

Can't wait for the next video Kyle...as always your work is great...I enjoy every minute of your builds

@KJRaycing 2 года назад

Thank you very much. I get a ton of motivation from comments like this.

@vintagetintrader1062 2 года назад

Been waiting for this, I’ve been building a single seat buggy (Edge) but I keep holding off working on it as I really need a 2 seater to take the kids.

@KJRaycing 2 года назад

There are going to be a lot of happy kids when we get these built!

@thomascrowe3407 Год назад

Motorcycle or electric driven formula one karts would be a cool weekend toys as well.

@KJRaycing Год назад

Well I have a VF-1 and a VF-2, there are plenty more numbers to use and designs on the way 🤓

@seandye658 Год назад

This is incredible information. Thank you so much

@vintagetweed 2 года назад

Really looking forward to this. Fantastic fab work. Love to see the preparation taken. Cross kart has been a dream build for years. Very cool.

@KJRaycing 2 года назад

Thank you so much. I’ve had crosskarts on the brain since 2004 when I first saw them. It is so cool that not only did I get to design and build one; I get to step into a new two seat form of crosskarting 🤓

@epicvids724 Год назад

I finished the go kart and its amazing, its super fast i have a yamaha 750 motor in it

@KJRaycing Год назад

Let’s see some vids, man! Congratulations. 👍

@JacobSherwood 2 года назад

Killin it my man!🔥

@KJRaycing 2 года назад

Thank you!

@domino2205 3 месяца назад

I really like what your doing in the use of the angle gauge and spring back using the pin as a reference. After you have the slop out you zero the angle gauge so if the level of the bender is off level in that direction zero takes care of it, but how concerned are you about the bender being level left to right? Very well done build video

@davessparetime83 2 года назад

A two seater single rear wheel autocycle (reverse Trike) would be a good option for a next build. Street driven, lower ride height.

@KJRaycing 2 года назад

Next build is already decided… it has four wheels but is not a kart. 😁

@kontrakgaming4107 Год назад

Subscribed!!

@tj49b 2 года назад

So excited to see this one!

@stevenbeebe5419 7 месяцев назад

Want to see the two seater in the sand

@movingkartcross9221 2 года назад

Top Parabéns...muito legal Bom processo de fabricação

@KJRaycing 2 года назад

Thank you very much.

@ghassanalniser3261 2 года назад

Perfect measurements

@KJRaycing 2 года назад

Can’t wait for this one to come together!

@gonracn 2 года назад

Been waiting for this!

@kevkev5935 11 месяцев назад

This is amazing. I've been wanting to do a build like this as a project with my 9 year old for a while. Do you source your stock from places online or mostly locally?

@TravisAnderson-zw1pd 4 месяца назад

Should have made made it like a fighter jet seating one behind the other

@epicvids724 2 года назад

im gonna build this

@KJRaycing 2 года назад

Heck yeah man!

@alexarujo898 Год назад

Vc vende o projeto desse mini buggy

@franciscowashington2155 Год назад

Beleza muito bom 👍👍👍😎

@sderrsdgfyiaedefg2683 2 года назад

having that grinder with no shield on it is some risky business dude

@KJRaycing 2 года назад

I grind like there is no shield on it. Kind of like when you ride a dirt bike without a helmet…

@SoBoring136 2 года назад

I appreciate your doing all you can to make this a option for people with no fabrication skills, nice job.

@KJRaycing 2 года назад

Thank you very much, that means a lot because it’s exactly what I’m trying to do.

@phoenixfab6853 Год назад

Nope

@mdd0204 6 месяцев назад

Do the plans come also in Metric system ? will be happy to have them in Meter/centimeters

@digger_jon2778 Год назад

I'm friends with the owner Joey from rogue fabrication how cool

@Watthead80 6 месяцев назад

Cool story..you should write a book.

@metalgt6828 2 года назад

This is awesome! I've been wanting a crosskart for so long, but I'd love one of my boy's to ride around with me too!! Too bad I don't know how to weld lol... you don't live in NC by any chance do ya? lol...

@KJRaycing 2 года назад

I don’t live near NC, sorry. I use a pretty simple welder and learning to weld this stuff isn’t too hard. It is the perfect thickness of metal to weld everything easily with a simple mig setup. I use a Lincoln 140HD that just uses a normal house outlet and my welds come out strong.

@patrickveal5435 2 года назад

Best thing you could do is grab some scrap, buy a welder and have at it. You'll notice changes in your ability with nearly every pass.

@septa814 Год назад

Mantap bang 👍👍👍👍

@septa814 Год назад

👍👍👍👍

@jaycarter9489 3 месяца назад

just add the 100 000 thousand in equipment and you can do this easily

@dakotaford6401 2 года назад

Keep posting videos man!! This is the first channel I check when I log into RU-vid now! I’ve watched all your videos and now I’m about to spend a bunch of money building one of these. A question before I buy your plans I’m a tall person (6’3”) what pipes should I extend? And by how much? Or would the plans be fine for me?

@KJRaycing 2 года назад

Man that is really cool to hear and thank you. The details are in the plans of exactly which pieces to extend. I cover it in the two seater videos although I didn’t stretch this one. It is very similar to the single seat stretch process I did for the budget build if you want more of a walkthrough.

@Buildit4u 2 года назад

Such an awesome build, Also too poor to buy the plans😅

@KJRaycing 2 года назад

Thank you. The plans are the least expensive part of this build. I hope you can figure out a way 👍

@lamborghini9651 8 месяцев назад

qué programa usaste para el diseño??

@augieweston7962 5 дней назад

and where are the lengths for the metal

@KJRaycing 5 дней назад

Kj-raycing.dpdcart.com . Read the descriptions of the products to see what is included 👍

@barracudalife7720 8 месяцев назад

Hello I purchased your plans and I don’t understand the outer diameter of the pipe tell me please

@ApocGuy 7 месяцев назад

how hard it would be to modify VF2 so i could use car engine? i'd gladly take 600+ cc bike engine, but where i live even 20 years old are well above 1K €€...

@reginaldociriaco9030 Месяц назад

Como fasso pra conseguir as medidas progeto

@stevenpleasant5834 2 года назад

Hi Sir very nice I like both Crosskarts but this is better and real cool I will be watching as I do all of your videos keep the great build up just would like to ask being you are building this new two seat crosskart have you had thoughts on building one with 4x4 set up that would be really the coolest yet and guy in woods trails would like to have onein a 4x4 set up it would not be that hard to do just use 4x4 spindles and differentials for a Quad hope maybe you might build one some day.

@KJRaycing 2 года назад

Thank you! I left some room open in the front for a differential setup, but honestly 4wd is not really my thing. I really love the feel and challenge of 2wd. And I love how simple and inexpensive it is too. More moving parts means more stuff to fix. I look for busted up inexpensive utility quads that could handle the power of a 4 cylinder, but I haven’t found a cheap donor yet… thanks again!

@sinsinsss5216 Год назад

Seperti ini nek pinter wes metu iso dadi shae jumlahe melimpah.

@KJRaycing Год назад

Not doing it for the money; I already have a job. My intentions are to help like-minded home fabricators create something they’ve always dreamed of.

@augieweston7962 5 дней назад

does the plans also come with tires

@KJRaycing 5 дней назад

Kj-raycing.dpdcart.com . Read the descriptions of the products to see what is included 👍

@clesimparreira553 Год назад

Parabéns pelo seu projeto ,como consigo seu projeto ?

@KJRaycing Год назад

Check the description for details 👍

@reinhardkastner5488 Год назад

Hy Dude, I appreciate your work, but I have one question, wich designing programm are you using

@rubemxavier3616 11 месяцев назад

Onde eu encontro o projeto com as medidas para a confecção da gaiola

@josearmandojolianizgonzale1185 7 месяцев назад

Puedes compartir los planos estoy interesado gracias

@KJRaycing 6 месяцев назад

Kj-raycing.dpdcart.com

@alonsorivas7244 2 года назад

Heck yeah awesome finally the 2 seater 🙌🏼 when will the plans be available?

@KJRaycing 2 года назад

Thank you! I’ve been working on these plans for a while, so when the frame came off the jig I was super excited to say the least. Plans are available right now 👍

@dakillaklown715 7 месяцев назад

Got a build for square tubing?

@KJRaycing 6 месяцев назад

Obviously not 😁

@bryanflor9527 8 месяцев назад

Puedes compartir los planos

@KJRaycing 8 месяцев назад

Kj-raycing.dpdcart.com

@Eje-j1z Год назад

What size tubing do you use?

@jarvislarson6864 11 месяцев назад

I dont understand why you would build a jig in order to build a chassis......you can make mistakes building the jig just as easily on the chassis without it . So is it so you can build multiple chassis and speed up the production?

@KJRaycing 11 месяцев назад

It’s because I’ve built one without a jig. All of this comes from experience. The jig uses 90 degree angles and simple measurements, so it’s actually very hard to make mistakes. The proof is in the success of the guys building these. The hardest part is to start and guys always looking for problems rarely start on anything. I wish you the best 👍

@thethrillofitall Год назад

This, is exactly what I've been looking for. Thx so much! Awesome channel! New to your channel, not sure if you mentioned the brand or type, but what bender is that?

@KJRaycing Год назад

So glad you found it! This whole channel and the plans were started just for the fans of my hobby. It is a RogueFab bender, they have a KJ Raycing package on their site to make it easy for guys to get started. Thank you so much for tuning in!

@thethrillofitall Год назад

@@KJRaycing thx KJ!

@SpoiledBread24 Год назад

How many mph slower does this 2 seat version go compared to the 1 seater? and how much more does it weigh?

@KJRaycing Год назад

The chassis weighs about 50 pounds more. Added weight of passenger seat and passenger vary. Speed is however you gear it 👍

@robertvicks9139 2 года назад

🔥💯

@robtomberg2393 Год назад

Thanks for you videos!! Are the plans also in metric? Gr from the Netherlands

@KJRaycing Год назад

Plans are not metric but lots of guys have just converted the numbers for their builds. It doesn’t take too long and it’s totally worth it. Good luck 👍

@robtomberg2393 Год назад

@@KJRaycing thanks for the reply! I'm Just shy of 6 foot 6 inches.. how much do you think i have to ad to the measurements? Planning to do a aprilia rsv mille engine

@KJRaycing Год назад

I would definitely get the VF-1 XL. I designed it just for you 👍. That rsv is going to be awesome!!!

@cesarsalvatierrachuve3090 Год назад

Hola soy de bolivia tendrías planos para enviarme

@KJRaycing Год назад

Check the description 👍

@humperdinckoglethorpe4180 Год назад

Is there a cheaper alternative you would recommend for a tube bender?

@KJRaycing Год назад

Sorry, I only know Rogue Fab. I wish this stuff could be less expensive but it’s not. This is the most inexpensive way to build a safe high performance machine.

@MrBigleo25 Год назад

Can u build me a frame for two seater not welded out I can finish it out

@KJRaycing Год назад

Lots of guys building them, you can too 🦾

@MrBigleo25 Год назад

@@KJRaycing i bought the plan but i just dont have the room in my house i thought i could its going to be to much plz consider it and let me know

@barracudalife7720 8 месяцев назад

please tell me the outer diameter of the pipe? Thank you )

@KJRaycing 8 месяцев назад

It’s in the plans 👍

@barracudalife7720 8 месяцев назад

@@KJRaycing can you give me a 3D model of your buggy? I already bought plans from you need a 3d model

@lutherwhitmire3982 2 года назад

I HAVE Been Wanting To Build A 4WHEEL DRIVE Go- kart FOR A WHILE NOW. I JUST NEED Some FREE PLANS. I tHINK I HAVE ENOUGH STEEL. IvaM LOOKING AT TIRES AND ENGINES NOW.

@KJRaycing 2 года назад

I would give my plans away, but unfortunately they are not worthless. They are the least expensive part of building one of these though. Good luck!

@AllenSteiner 7 месяцев назад

Where can I get the plans

@KJRaycing 7 месяцев назад

Kj-raycing.dpdcart.com

@juanmachado3296 2 года назад

Good work!!! What brand and model is your tube bender?

@KJRaycing 2 года назад

It is a Rogue Fab M600. The updated version is the M601. Rogue is an awesome company for sure, definitely check em out!

@cesarsalvatierrachuve3090 Год назад

@giuliano3963 2 года назад

Looks great! How much space is available for the engine? I'm thinking on using a 1.3 honda jazz engine

@KJRaycing 2 года назад

Well there is as much space as you need. But the space used for the motor will take away from room for the driver... You may want to consider stretching the chassis and using all .120 tubing if you are going to use a car engine. It will end up being heavier which means more expensive shocks, hubs and driveline. There is a reason these karts are so fast and fun and that is because they are EXTREMELY light and nimble. Good luck, I hope it works out for you.

@giuliano3963 2 года назад

@@KJRaycing thanks for the detailed answer! I'll try to find a motorcycle engine then!

@reginaldociriaco9030 Месяц назад

Tarde queria progeto

@safwan096 2 года назад

what type of pipe are you using for the body?

@KJRaycing 2 года назад

1.5” and 1.25” Dom tubing for the frame.

@sembiringsembiringmilala9050 2 года назад

Bacrit Mr Love

@jayramirez2463 Год назад

Link to plans?

@KJRaycing Год назад

Links to everything in the description 👍

@obrolankampung64 Год назад

iam from indonesia..please send size

@KJRaycing Год назад

Kj-raycing.dpdcart.com

@TyLuttmann Год назад

would that fit in a truck?

@KJRaycing Год назад

It could definitely be built to fit in a truck. Would need to have a long bed though.

@silvanoloureido7758 Год назад

where can i buy the plant

@KJRaycing Год назад

Check the video description for all the details 👍. Enjoy the build 🦾

@omerfarukakgun1350 Год назад

What are the pipe dimensions?

@KJRaycing Год назад

I don’t use pipe I use tubing. All of the material needed is in the plans. Link to the plans in the description 👍

@រក្សាថ្លាង Год назад

You can buy it back, are you beautiful?🙏😢😔 Can you give it in Cambodia?😔🙏 Are you a Nazarene?😔🙏 You see so beautiful?😔🙏😭

@BoreyPhan-ws3cz 3 месяца назад

សួរស្ដី friend ខ្ញុំនៅខេត្តកោះកុង ខ្ញុំរាល់ថ្ងៃផលិតឡានកាត់ស្មៅ តើនៅខ្មែរយើងនិង បន្តិចទៀតខ្ញុំនិងផលិតឡានក្រោះ និងដែរហើយ តើ 😊👌🥰🥰

@以纯不纯 2 года назад

Hello blogger, I think your go kart is very good. Can you provide me with the drawings? I also want to try to make my own go kart. Thank you!

@KJRaycing 2 года назад

Thank you. kj-raycing.dpdcart.com

@Watthead80 6 месяцев назад

1000 bucks for a "cheap" bender.😂 Unless you're building a shitload of frames there is no way to justify spending that much on a bender.

@KJRaycing 6 месяцев назад

You can be one of the smart ones that spends $20k on a sxs or $50k on a Sierra car Vs Under $10k with tools to build your own. You got me…

@michaelchristian8220 5 месяцев назад

Jd2 does just fine if you can find one for cheap. I made my own clone personally. The Rouge fab is just less effort and can be more accurate. Either way, comes down to the operator

@DarriusAnderson 2 года назад

We need to talk lol 🔥

@LuisDiaz-kg1fy 2 года назад

Hell yeah is going to come out dope bro!!!!!!!!!

@ltsky311 Год назад

I have found using a chalk line can work well for marking centerline if you dont' have long straight metal.

@danilbaranovskiy4116 Месяц назад

Is it possible to get a video of a single bath? please?

@austinmurphy1111 5 месяцев назад

How much does one of these cost after it’s built ?

@cleilson6316 Год назад

Ganhou inscrito. Saudações aqui do Brasil.

@TungVinhLong89 3 месяца назад

What is the exact name of your pipe bending machine? I want to buy it. Please answer me ! Thank❤

@KJRaycing 3 месяца назад

It’s in the description along with all of the other info, it’s a Roguefab bender and they have a KJ Raycing package.

@TungVinhLong89 3 месяца назад

@@KJRaycing thank u.By the way, let me ask you what software did you use to draw and design the car frame?🥰

@KJRaycing 3 месяца назад

Sketch up

@TungVinhLong89 3 месяца назад

@@KJRaycing Thanks from Vietnam

@garyadkins9494 9 месяцев назад

Could I adapt a 800 triumph motorcycle motor to a build like this

@KJRaycing 9 месяцев назад

Yes 👍

@shadetreerestorations9053 8 месяцев назад

does your plans you sell incude the Jig plans?

@KJRaycing 8 месяцев назад

Yes they do! It’s a very important part!

@KJMcLaws 2 года назад

I'm so excited. I want to make one for me an my wife

@jackferguson2491 8 месяцев назад

How much does the frame weigh for the xl

@KJRaycing 8 месяцев назад

About 120 pounds I’m guessing.

@saintlouisstevenson5674 Год назад

🤩😀

@100musicplaylists3 Год назад

Make a two person cycle version with fold down seats that turn into a camp bed!!!

@matthewjackson9765 2 года назад

Be interested to see how the footbox area works out. Be nice to power that with a liter bike engine!

@KJRaycing 2 года назад

It’s all planned and measured. I double checked it before releasing the plans…

@augieweston7962 5 дней назад

???

@KJRaycing 5 дней назад

Kj-raycing.dpdcart.com . Read the descriptions of the products to see what is included 👍

@mailsonilson2649 2 года назад

our very great top.. very good your work as do I get the measure or the porthow do I buy

@LOgan-jp5oz 7 месяцев назад

We need instructions

@KJRaycing 7 месяцев назад

Kjraycing.com

@markojandric4888 Год назад

Where did you buy plan for making chassis and what differential do you use? Thanks

@KJRaycing Год назад

Check the description and continue watching the build series 👍

@diyabbulukgiray6902 Год назад

hi, where can i find the dimensions of the car?

@henryp1974 Год назад

Hey there I was wondering if there is a specific thickness on the square tubing for your jig

@KJRaycing Год назад

The square tubing is not structural, so I get the least expensive at the time. I’ve used .065 to .095 and maybe even .120. Get a price check on all of them.

@mailsonilson2649 2 года назад

muito top... tem como mandar para mim as medida e a planta

@SpoiledBread24 Год назад

Do you have a parts list like the VF-1?

@KJRaycing Год назад

A lot of guys are using the VF-1 parts list. I used all the same stuff.

@lanceburkhardt8265 Год назад

Music?

@wogelkrafts 2 года назад

Damn Kyle! Very impressive work! Making it look super easy! :D Keep doing what you do! ;)

@KJRaycing 2 года назад

Thank you. So many of these are being built it has to be a little on the easy side and not just me 😁.

@kevinheiden6178 2 года назад

Where do you get the tubing for these builds?

@KJRaycing 2 года назад

I buy locally. Metal supermarkets is a great place with stores nationwide. It is always less expensive than buying online.

@WillysRubicon 2 года назад

Exactly what I have been hoping to see soon! I will be buying these plans for sure. Thanks!

@KJRaycing 2 года назад

This is going to be a good one!

@WillysRubicon 2 года назад

@@KJRaycing what are you going to use for a donor engine on this one? I have been thinking a large selectable 4wd 4wheeler would be awesome. Like a Honda 520 electric shift. Not as fun but practical

@johnsilva3350 2 года назад

How much for a 2 seater frame?

@KJRaycing 2 года назад

Only $50 for the plans. You’re going to have to get your hands dirty if you want one. You can build this; enjoy the build and the drive 🦾

@williamlanphar630 2 года назад

This looks great Kyle ! I cut up 2 of the 1 1/2 " tube sections today before the rains came. I have sent all 11 of my clamp blocks out to Rogue Fab to have the indexing marks engraved . So far everything is going smoothly.

@KJRaycing 2 года назад

I heard about Rogue doing some exchanges for the guys who just bought their setup. Man they are awesome guys! It is so fun to get started on a new build, right?

@williamlanphar630 2 года назад

Absolutely ! It is definitely quite exilerating !