Two stage powder coating- A how to with tips 

Hey brother, as an entry level powder coater starting up my own business, your videos have helped me lean so many tricks and tips to apply to my method of getting quality work completed! Thank you so much for sharing your knowledge

Nice tips, would have liked to see the finished cup.

Great video thanks, I just powder coat stuff for myself on my motorcycles, I did a job for a friend and never again he complained about everything, and he knew I was new at this and doing it for free too so I’m just doing my stuff from now on, I’ve always had alittle trouble with the second coats but your video help me with that thanks

You taught me alot about using a cloud. Opened up my world . 🎉thanks for sharing your knowledge.

Is the tape conductive? How is the circuit being completed? Thanks

I want to thank you for all yr video you do. I started a little side business Green Mountain Media Blasting and Powder Coating and when i run into new colors or new issues or anything i always search your videos looking for help and 99% of the time i find it. And if i can’t i messages you and get guidance from you that way so thank you. You have a subscriber for life here.

New to the art, so watching your videos is a big help. thanks so much.ohh I chose your videos because 99%of the other dudes whom post videos are like watching paint dry (forgive the pun) but just boring and vanilla and make me want to hook up the ground clamp to my face and press down on the trigger while watching there videos for a little more excitement.

Love your RU-vid!!

Wanting to do a fair number of small steel parts, but need more info on priming. Specifically, will just regular rustoleum automotive primer work, or do I need a high temp primer such as used on headers, etc?

Thanks for the video, where did you get the KCI machine? I have an older one and love it. Would like to get another.

So whenever there is a "clear coat" called for in powder coating, it's actually a clear powder? I was under the impression it was a clear with an hvlp gun like a paint. Guess not. And you wouldn't dare use that type on powder?

Hi, can we mix two diiferent translucent powders to get secondary color??

I keep getting orange peel in my finish. And I prep my metal and try and do a good job with the prep but for some reason I keep getting orange peel. I have the Eastwood two stage gun. Any ideas of what to try.

Thank you for your time and advise.

I like your videos and leaned a lot, but why you didn’t show the second coating result

I'm currently using the same gun but one looking to buy a new air compressor, would you have any recommendations?

I’m a novice PC er and I’ve been spraying the illusions on my tumblers and your spot on about everything especially reading the online tech sheets prismatic powders supplies you with all there powders. So far I’ve had good luck with my Eastwood dual volt gun and the illusions series...I’ve only had an issue trying to do a second coat on some 3/4” recovery steel shackles....the first coat gloss white did great, but my topcoat bright green would stick every where except a couple of small spots and it would not take no matter what. I blew the green powder off, cleaned it and tried again and it would not stick to the same area! Any suggestions?? Also prior to any powder I removed the galvanized coating with vinegar overnight then cleaned it and out gassed it for about 30 min once it hit 400. I have several of these to do but I need to do a topcoat on most of them with transparent powders. Do you think I should try another color combination or a different brand powder? Thanks man!!!

Which gema powder coat gun do you use? Where can you buy one? How much are they new?

What chemical do you use in your rinse tank and is it really needed before rinsing the part?

Powdercoating illusion purple having issues at second coat

Hey man am a new powder coater still learning but you do great work and videos as well I can’t forward one bit because you give out lots of good info good job man. By the way I am doing a 2014 Kia Cadenza wheels ink black and I got back ionization and some I can see happening whe I take the part out of the oven, and the second thing I have very bad faraday cage effect due to the angles what would you recommend, I am using a Eastwood dual voltage. Thank you in advance

you have the earth ground wire to your metal rack so where do you hook the ground from your powder gun too

I am coating some parts in candy purple over ultra chrome and having a hard time getting the purple to stick. I have to heat the part and shoot it hot but can get it coated it too heavy and the parts do not match. Called prismatic powders and they said second coat at 140 degrees but still didn't work.

Man, I did a swing arm and it looks great with exception of one area where I didn’t get enough powder on it. Can this be salvaged with a second coat or should I start over?

Thank you for this video. I am starting out PC'ing. When using the eastwood gun on 1st coat. Rule of thumb is higher KV correct? Prismatic Powders says 45KV on their data sheets. What effect woukd this have on powder placement at lower KV? Thanks for the great videos. I just subscribed. I'm going to attempt a Cylinder Head off of a 1982 Yamaha XJ650, any tips. LOTS OF FARADAY CAGE AREAS! I'm kinda nervous. Any tips?

Can someone please help me understand? I’m very new to this i just bought a 4x4x6 oven that we haven’t even got in yet but I’m doing as much research as i can. The question i have I’ve watched on RU-vid and seen hundreds of different answers. My question revolves around multiple coats and clear. 1) everything i see says you should always use a clear coat for durability and to keep the chrome colors bright. 2) where I’m confused is multiple colors for example if i do chrome and let it cure as recommended do i put the transparent on when hot or back at room temp? 3) when putting on the transparent color i put back into oven. Let part get to tell and do the recommended cure time. ( will the chrome coat being cured twice hurt it)? 4) when that comes out do i add the clear when hot or room temp? After i add the clear and put in oven and let part get to temp and cure at recommended temp. ( will the chrome coat going through 3 cycles and the transparent 2 cycles hurt them)? I can’t seam to find anything on this that’s consistent

Hi! Can you tell me why are you turn down the KV's? What is the reason why you do that ☝️ Good Video Dude

Never trigger the gun on your work piece

im looking to start powder coating in my area. I have a background in painting and restoration. Im going to be doing small items mostly like motorcycle parts. What would be the best entry level profesional gun if that makes any sense. A step up from the eastwood but not wanting to dish out $3k+ yet. Thanks for the how to videos.

Sir im a first time powder coat what should i do, i use super chrome as base coat and i second shot top coat, but the result was very horrified the color turns to grey, please help me for this. TIA

You said you are the only person there to make the video so bare with you... So who's cock blocking may I ask??

Does your mom go to college?

Why do a video and not show the outcome. Major thumbs down

dude... you are over complicating things. Keep it simple, when do we use single stage, when do we use dual stage, what is the benefit of each, and don't use verbage we are not familiar with , without explaining what that word means. What is 'hot flacking' you speak as if we knew what that means, also you refer to "KB" ,...dude we don't know what that means, you have to explain those terms. I know it makes you feel knowledgeable but that is not why we click on here. Also you heat the item and don't bother to tell us if we need to do the same, and how and why. Its common sense questions dude, use your head.