No video :(

Ultimate DIY Off-road Drawer Build for any vehicle!

Подписаться 17 тыс.

Просмотров 57 тыс.

50% 1

In today's video, we build a DIY Drawer system for my friend's 1999 Toyota 4runner, the dimensions on this build are very close to mine in my 2008 Lexus GX470. Make sure you buy good quality plywood from a local store that specializes in wood not Lowe's or Home Depot ect. Finally I may create 3D plans if I can learn how to use the software lol
Products USED in this video:
Drawer Slides I suggest: amzn.to/37U8t1x
Carpet used: amzn.to/3r133th
Wood Glue: amzn.to/3uBkcvz
Pocket Hole Jig: amzn.to/3uGL5P0
Electric Stapler: amzn.to/37U4fHd
Irwin Clamps (medium): amzn.to/3r6aaR2
Irwin Clamps (large): amzn.to/3b091VD
Dewalt Table Saw: amzn.to/2ZUsmB1
Dewalt Circular Saw: amzn.to/2MwB2ux
Dewalt Cordless Sander: amzn.to/34h1az8
Milwaukee Drill & Impact: amzn.to/37n85Jd
Camera Gear:
Camera #1: amzn.to/2Kcf6mF
Camera #2: amzn.to/3nnt0Bb
Lens: amzn.to/3a1j8t5
Rode Wireless Go Mic: amzn.to/2JOdDmM
Rode VideoMic Go: amzn.to/34eE5xa
Blue Yeti Mic: amzn.to/34jHWZA
Gimbal: amzn.to/3gxgixp
Drone: amzn.to/3oRTVp8
Sponsors:
Skid Plates: www.okexpediti...
Roof Rack: sherpaequipmen...
Rear Ladder: www.nashfabco....
Red Dog Front Bumper Link: red-dog-fabric...

Опубликовано:

27 фев 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 54

@TrailReady4Runner 3 года назад

Thanks for sharing. It's awesome to find people with the same hobbies woodworking, cameras & off roading.

@LoganKingMedia 3 года назад

🤘

@abdullahmahmood3040 3 года назад

DIY everything! I can’t wrap my head around folks paying $1000 plus for ARB/Drifta drawers. Good work

@gregdogg10 Год назад

Actually works out quite competitive once you factor in all the costs of materials and labour

@Chase_Schrader 3 года назад

Perfect timing, I’m in the process of planning my drawer system for my Forester!

@LoganKingMedia 3 года назад

Awesome!!

@charleshall9461 Год назад

This guy knows his stuff!! Definitely not a novice.

@Gigachadly 2 года назад

7:34 just causally sweeping the dog. 😂

@RobHartson 3 года назад

Attention to detail 🙌🏻

@davidrucci 3 года назад

So sick. 🤙 Nice work brother...

@LoganKingMedia 3 года назад

Thanks man!

@sloscheider 3 месяца назад

Have you had any issues with tipping when one of the drawers is pulled all the way out? Could you put eye bolts and turnbuckles on the outside of the box towards the front to attach to the floor D ring tiedowns?

@Brentcallow 3 года назад

New channel name: DIY BUILDING STUFF WITH LOGMAN

@LoganKingMedia 3 года назад

haha coming soon

@finboyYYC 3 года назад

Awesome, I was hoping you would do some woodworking on the channel

@LoganKingMedia 3 года назад

Thanks!

@Fr33k 2 года назад

Awesome made!

@lincolnp7770 3 года назад

1/2 Inch exactly is the actual width you need for ballbearing draw slides. So 1 in narrower then the opening of the frame

@LoganKingMedia 3 года назад

Yeah exactly, thought I would share my mistake so people know that you need to be exact.

@MrLuescher 8 месяцев назад

Do you have the plans for the workbench with the table saw?

@jpht.adventures 2 года назад

I'm here for your pup

@eradicator187 2 года назад

Nice job!

@UncleT0ny 3 года назад

@logan King Your pocket hole screws at 4:01 are facing the wrong side.. you should be screwing into the "meat" of the wood, not out

@LoganKingMedia 3 года назад

Good call!

@juanbarraza5562 8 месяцев назад

What did you use to attach the drawers to the truck

@calebmatthews09 2 года назад

You didn’t happen to make plans and measurements when you made this did you? I have a 3rd gen 4Runner and this is exactly what I’ve been looking for

@DanielTillotson 3 года назад

How did you do the one part with the stuff?

@LoganKingMedia 3 года назад

I did that thing with the tools 🛠

@yanglu8838 2 года назад

What a great build! I would have to look into adding carpet into my build once I'm ready for it. So can yall tell me the net weight for the drawers? I'm trying to calculate its weight for my Gen 5 since I have al my first responder gears I'm trying to shave down some weight and still able to access all of my gears. Thanks!

@LoganKingMedia 2 года назад

Thanks! Im not sure on the exact weight but I would guess around 80-100lbs, im sure you could shave some weight by using half inch plywood in some of the build. I used 3/4 to support the weight of me sleeping on it and my two large dogs standing on it lol

@1stuart1 3 года назад

Well done. Any comments on the weight? I often wonder if weight could be saved, and strength maintained by making out of metal.

@fishhuntadventure Год назад

I know! There’s a lot weight there in plywood that doesn’t even add any practical strength. Cleats made of pine would be fine and much lighter weight. And stressed 1/4” plywood with glue and a perimeter frame would weigh very little and be more than sufficient strength-wise, drawer bottoms 3/8” and the ‘sleeping platform’ might even be ok with 3/8, too. Metal frames would probably come out about the same weight if you did the plywood construction light and well. Interestingly, I made a 60” by 28” mechanic’s rolling toolbox with a 1x1 welded steel perimeter frame, 1/2” baltic for the skin/panels, and the drawers are all 1/2” baltic birch, too, with continuous grain figured red birch drawer fronts. I built it before youtube was imagined. It’s still going strong and is my best layout tool box. Plus it looks cool with the steel and carcass in a custom dark blue I mixed up, and amber shellac drawers and top. So light plywood construction done right ain’t going to warp or sag, or break.

@ericrivera7191 Год назад

Brother, did you buy those headlights already ready or did you restore them yourself?

@25falcons 11 месяцев назад

why do you not suggest buying wood from Home Depot? is the quality that bad?

@robensonalisme4301 Год назад

Awsome work! Did you use any slide for the drawer?

@LoganKingMedia Год назад

Thank you! Yes I used slides, If I did it again I would use locking slides this time

@nirsman23 2 года назад

Thanks for sharing. Going to be tackling my build for this soon. Just wondering if I’d be using this for just storage, could I get away with 1/2” or would you say 3/4” is a must?

@LoganKingMedia 2 года назад

Welcome! I think 1/2” should work for you

@nirsman23 2 года назад

@@LoganKingMedia thank you sir!

@Prettyflacko22 2 года назад

What are the dimensions for the gx470?

@csgofordummies1239 3 года назад

Has your EIbach sagged into reverse rake with this + some gear in the back? I have my kit in the garage BNIB and considerng getting something else for the rear. Seems like any weight above 100lbs causes reverse rake

@LoganKingMedia 3 года назад

Yeah if you plan to add some weight I would maybe suggest getting different springs for the rear. I am looking at getting the dobinson C59-677V right now.

@csgofordummies1239 3 года назад

Thinking about swapping springs for either Eibach HD or just going another company altogether. Any reason why you want to swap to another company rather than just Eibach since youll have to get a diff conversion kit? (more than the spring itself) I even considered just getting 20mm spacers from Ironman for $60 and calling it a day. Have you thought of that option?

@LoganKingMedia 3 года назад

After looking into it more now the Eibach HD springs look like what I need, they didn’t have this option when I got my kit almost a year ago. The only reason I was considering those specific dobinson springs is because they are compatible with their long travel kit which I did want to upgrade to eventually.

@keizersoze907 2 года назад

I have a 3rd gen and looking at trading a Sxs for a 2005 GX470 on 34s, how much more do you enjoy the gx470 over the 3rd gen?

@LoganKingMedia 2 года назад

I like it a lot better then the 3rd gens the size of 3rd gens, seats and maybe them having a rear locker is a bonus but other then that the gx470 is better in everyday especially for me as its my daily driver. More power with the V8, more comfort and features and more room are the main things.

@keizersoze907 2 года назад

Yeah man I have a 2000 4runner and stopped going off-road with it. Started using it to pull my 900 RZR but thinking about trading my RZR for a 2005 gx470 with 34" tires and wheels plus 3" Bilstein lift. RZR is fun but I enjoy the vehicle off-road adventure more then wheeling

@w_dub_wilberforcejr 2 года назад

NICE!!! did u remove the 2nd row seats?

@LoganKingMedia 2 года назад

Thanks! I removed the single seat in the rear and left the double but I think I may remove the entire second row eventually.

@SpencerHogg 3 года назад

I need a drawer system

@LoganKingMedia 3 года назад

Yes you do! They are even more effective on a truck

@YotaSurfs 3 года назад

@@LoganKingMedia Agree!

@GodsMan500 2 года назад

It’s best not to wear gloves when working with power tools. The moving parts can easily grab the material and drag your hand right into the blades or mechanism, depending on what machine you’re using. Very dangerous.