Ultimate Guide for the Stationary Rope System (SRS/SRT) For Tree Climbers 

Boss man that is the best example of how to use this system I have seen yet. You have been a real blessing to me. I would work for you in a heartbeat. If my bills would allow. And probably Injoy my job again. My God bless you my friend.

After watching hundreds of hours of RU-vid for climbing information, I invested in the Notch Fusion and tether combo. I have an SOB full body harness that appears to be a clone of the Petzel AVAO bod. It has both chest and waist D rings to connect. But I am having exactly the issue Bino points out, you should not be laying back just climbing a ladder. I’ve tried connecting to the waist, the chest, the waist and chest, still trying to lay back as opposed to ascend like on a ladder. I actually think I need a heck of a belt around my chest to get me close to the rope. I’ll keep watching and trying, hope to figure it out. Oh yeah, I’m and old guy stocky like Bino, probably stockier by a fair margin 😀

Good explanation on how to advance the TIP. The best to you.

Nice Bino. I used my rope wrench and foot ascender and knee ascender first time today. Went up 75' and removed a hanging huge dead limb. I kicked out one time on the way up, no biggie. just sat into my hitch, re-entered the climbing line to my foot ascender. Once I got my chest rig figured out, the knee ascender worked great. Until now, I have only been gaff climbing on DRT and doing removals. now, I can do deadwood removal and pruning. thanks for your calm wisdom and experience. George.

thank you. I am just getting started gathering gear, this was very helpful.

Great video, It was easy to follow and full of information.

Very clear information. Thank You. Spring is coming and I'm going to try this year learn rope wrench system. Till here I have climbed with Petzl ascender, Grigri and footloop. Br Timo / Finland

Thanks for another great video. This explains it perfect.

Thank you so much. This saves me a lot of time. May God bless you, sir.

It amazes me the all the systems they have now. When I worked 42 years ago. We cut limbs and trees from the powerlines. All we had were rope, saddle and saw's. I like your video's

Thanks Bino. I appreciate your time.

Awesome video, thanks for sharing. Stay safe, God bless

Great video brother. Thank you for sharing hour knowledge

What an excellent summary.

Thanks for the video. The Uniscender preceded the other mechanical prusiks on the market. Originally designed for DdRT (MRS), it was quickly adapted to SRT (SRS). When tip tying with the Quickie in the eye of a Butterfly, it doesn't like redirects. Try placing the Quickie above the Butterfly. Many climbers do the same trick with a ring, but the Quickie is midline attachable.

Awesome video! Thanks!

Rope Runner Pro is my next gear purchase. I have about everything else and I just think it is going to work perfect for me.. Stay Safe

Mate! Thanks for your video. I've been studying Arborist climbing course online while collecting gear. I saw the rope wrench and I want it. But you show how to use all equipment. I am planning to do up to certificate 5 in climbing just to be perfect! You have the best tutorials ever! I love heights but I am practicing climbing teqniques on a wall I setup! Thank you sir! Cheers 🙂👍👍👍

Good video Bino!

Great video!

Nice video. I am impressed with how small you have your friction hitch and wrench setup. Do you have a video with details on how to do that?

Thanks for your informative video Bino! Since you mentioned them, I'm curious if your knee ascenders work with your new Notch Jet Step?

I don't give a damn what anybody says, this dude is the fuckin man.

did a climb with a friend, he tied an apline butterfly about 2ft from the spliced eye, put a biner in the eye, and a quickie from the butterfly to the other leg of the rope, SRT up and work position, and Ddrt rappel

I'm a beginner to tree climbing and tree work. I bought a house about a year and half ago that needs a lot of tree work and I don't have enough money to hire someone to do all the necessary tree work for me. The biggest problem is there's about a dozen pine trees, many of which need to be removed. Some of them have limbs hanging over the house making it necessary to go on the roof to remove excessive pine needles droppings every few months. Further, all these pine trees drop way too many pine needles to leave them all on the lawn, which is also a big job to clean up. I've started removing some of the limbs from one of the pine trees with limbs overhanging the house. I'm using SRT with the Rope Runner Pro and the SAKA Mini Knee ascender and the Notch Jet Step Foot Ascender. I have a Big Shot and after numerous attempts been able to lines for SRS over unions (crotches) near the top of a couple of these trees, which I've now installed friction savers on. It works, but these pine trees are about 50-60 feet high and on most of these pine trees you have to go up about 30-35 feet before you reach any limbs, and you have get pretty close to the top of these pine trees before you could climb up between limbs using alternating lanyards because the limbs are just too far apart. So I have to use the ascenders to climb up nearly to the top of the tree. I do have some inexpensive tree spikes, but they make the trees bleed pine sap pretty bad making a mess. What's more, I'm not going to remove all the pine trees and it'll take me a long time to do all this work by myself, so I don't want to use spikes. My big concern is safety. Usually it seems with SRT what I see is that they just have the climbing line as the single tie-in until they reach some limbs. But with these pine trees, you have to climb 30-35 feet before you get to any limbs at all. That's a long way up with just one tie-in. What I've been doing is using one of my steel lanyards... I got them before I realized rope lanyards are much easier to manipulate!... and loop it around the pine tree to form a secondary tether tie-in point, so I don't have to rely on just one climbing rope to go so long and up 30-35 feet on just the climbing rope. So, if something were to go wrong with the climbing rope the lanyard looped around the pine tree would keep me from falling. This works, but it's VERY slow, and I'm wondering if there's any device that could make it easier to advance the lanyard up the tree after taking a few steps up with the knee and foot ascenders. Is there something I could put around the loop in the lanyard around the tree that is similar to the Buckingham Super Squeeze that would make it easier to advance up the tree. I'm also going to try attaching a secondary safety line to my harness, which would provide even greater redundancy. I also got the ROPE Logic adjustable friction saver, but I couldn't seem to find a way to make that work without it getting in the way of the Rope Runner Pro. I've seen the Tree Squeeze, but I'd think that have the same issue. I think both are really intended for spike climbing and I'd think both are likely to get in the way or the Rope Runner. Besides spikes, which I don't want to use until all the limbs are removed...where I might have to... is there anything else that anyone can think of that might be this easier and safer? Like. something which will keep the steel lanyard loop around the tree together better so it's easier to advance up the tree? I tried criss-crossing the lanyard too, but that also gets in the way of the Rope Runner. Any ideas?

Srt has always been the safest way to climb for me. Biggest complaint i hear is its gear intensive (very true) and its a hassle to advance canopy anchors; not with the quick links.

Like your videos ,good information

Great vid thanks

I love you’re videos

Hey man great video. Any advice on the best ropes and friction cord to run with a rope wrench? Cheers

Good job bro👍👍

Binooooooo.......happy holidays

C. Bino interesante cada vídeo.Tengo una duda para hacer un acollador es correcto utilizar una soga de 13 mm .Hay una soga aplanada de 1 .5 pulgada estaría bien utilizarla.Gracias por su enseñanza.

Great video, very informative! Have you worked with the uniscender?

Thank you.

Since I'll mostly be doing canopy work I'll need to do redirects and limb walks, so it's best I get my kit setup for SRS. Which rope wrench setup would you recommend? Why are there different length tethers? Does it depend on my Height? I'm 5'9 1/2" tall and 180 lbs. My climbing rope is 150" of Yale XTC Fire with one tight eye splice.

Ive learned with crane jobs that shackles wich is basically a big quickie shouldnt be install in a way that the pin is being pulled just like in your example

Hi there just a quick question about the chest set up you have on in this video is it just a light one just to help move the rope wrench up the rope as it did not look like it would hold you up if the other parts failed to hold on the rope . I have watched a lot of your video's I am starting out to climb trees for fun.

Off topic: do you have a video about friction savers for MRS? If not, is it possible to make one - with some "home made" options with carabiners (for better now the fs from one branch go another). Thanks!

REDIRECT >>> QUESTION>>> With the *RopeRunner Pro, are You snapping into Your lanyard once You accend into the canopy then disconecting the *R R Pro then tossing Your line over another 2nd crotch then re-attaching Your *RR Pro ? ? ?

I am wanting to get into this work, what’s the best way to get certified and we’ll trained on being able to do tree work and being able to be well equipped with using these types of systems?

I'm new to this so maybe someone can help but isn't it potentially dangerous to have a prusik below you mechanical asender, being if the mechanical fails and the rope slides the mechanical will then compress your prusik knot making that fail also?

Would using a climbing rated locking carabiner be a suitable substitute for the quickie ?

I feel like the rope wrench will never get old and its more cheap because the only thing you will change is your cordage

Bino 👍

Hey Bino I’m buying the rope wrench and tether setup, I’m also looking at the zigzag with chicane, I know it’s redundant but…..question is, why can’t I just use the RW with zigzag? I’m a part timer so most of m work is on my property and friends/ family Generally spur work My theory just for me is, RW for entry SRT(I like the safety of a hitch) Once in the tree I want to go MRS at tie in, then go to work where most of the time I’m lanyard in, the MRS is back up and manoeuvrability Talk sense to me if I’m not being sensible! If you wish a phone call we can arrange that as well. I’m in Canada AST zone

Hoping you can point me in the right direction here. At around 6:30, you show a base tie system, and the tie in point isn't isolated around one limb. It is already through several natural redirects. My question is, if you had your rope set up just like you show at 6:45, and you started climbing up the rope, how would you climb through the redirect points? When I look at that, I can't figure out how you would get your ascender above the redirect point while your weight is on the foot ascender. Perhaps you have already answered this in another video and I am just not looking for the right key words? Or there is a simple way around the problem that I am failing to see? Really hoping that you can explain or point me in the right direction to figure this out. Thanks so much for the many great videos already.

Bono, can you use a caribener instead of a quickie ?

Good morning. Bino. Yesterday I received a Rope Wrench manufactured by ISC. I noticed that during descent, in addition to the roller, the pin also rotates. Is this normal behavior, is it supposed to be like this? Please answer. Greetings from Poland.

How long of prusik is recommended for the rope wrench set up?

Looking for someone in the south Texas region who can teach a course of tree climbing

How do you get thr rope into the tree?

Is that pursick cord 10mm.....?

Can you use a bow shackle instead of a quickie? I’ve got a million of those with some really high ratings

Love you Bino! I learned everything I know from you and a select few other online aids. I’ve been filming some of my first climbs with a GoPro to try and document my practical application of these learner processes if anyone’s interested in seeing first hand what it looks like to learn from RU-vid! Check me out and help me if you have any better ideas 😛

Are your in fl?

i'm so confused.