No video :(

Unbelievable Chatterbaits - Make Bladed Jigs Yourself with these Simple Tricks!

Подписаться 16 тыс.

Просмотров 13 тыс.

50% 1

Make chatterbaits or bladed jigs just like the ones you can buy in stores. In this video I dive step by step into how to make chatterbaits with do-it molds. Buy your tackle making supplies here: store.do-itmol...
Products list:
Buy your tackle making supplies here: store.do-itmol...
Mold - Sparkie Jig Mold - Part #1080
Wire Forms - WB400 and STW130
Hook - 4/0 straight shank flipping hook
Duo Lock Snaps
Blades - purchased through Ali Express
Powder paint
Disclaimer - You can NOT sell chatterbaits or bladed jigs made in this way. Selling chatterbaits or bladed jigs made in this way will violate a patent that Zman owns.
All DISCOUNT CODES and AFFILIATE LINKS can be found here: linktr.ee/matt...
Learning how to make chatterbaits with do-it molds is a lot easier than many tackle makers may think. In this video I show you how how to make bladed jigs with do-it molds. Do it molds has a lot of different tackle making molds that make it easy to learn how to make jack hammers with do-it molds. The step to know how to make jack hammer bladed jigs with do-it molds is outlined in this video step by step. If you've been asking "can you make jack hammer bladed jigs with do-it molds" this video is for you. After this video you'll the process to have home made bladed jigs.
Garage Workbench: a.co/d/e6zhZIM
Camera gear I use: a.co/iw9kx03
Matt Luna Fishing apparel: matt-luna-fish...
That link contains discount codes and affiliate links with Omnia Fishing, DoIt Molds, or Amazon. Using those links and discount codes directly support the channel!
Follow me on Social Media:
Instagram: mattlunafishing
Facebook: Matt Luna Fishing
TikTok: Matt Luna Fishing

Опубликовано:

8 мар 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 62

@Bulfwyne Год назад

Been loving the Sparkie Jig mold !! made a few chatter baits, and they work like a dream, I watched the past two vid's too since they give different tid-bits. The wire keeper is a bit finiky at times, so i've modified my Jig Mold to be able to hold the wirekeeper in place close to the hook but enough for lead to flow around it, cause before, the wire keeper would be really tight against the hook where the lead needs to flow, but it gets blocked and i ended up with unfinished jigs that i had to melt back down, and redo it.

@MattLunaFishing Год назад

Glad you found a way to make everything work well!

@davidwilliams1805 Год назад

Awesome! Thanks for sharing!

@MattLunaFishing Год назад

You’re welcome! Thank you for watching and commenting!

@michaelmarema6785 Год назад

Sweet stuff. Thanks for sharing

@MattLunaFishing Год назад

Thanks for watching!

@OfftheHookOutdoors99 Год назад

They look great!

@MattLunaFishing Год назад

Thanks!

@peoplemeater 2 месяца назад

I'm pretty durable when I'm baked too... but cool video, I was curious how they were made.

@MattLunaFishing 2 месяца назад

Thanks for watching!

@jerrystatic256 Год назад

Looks good 👍

@MattLunaFishing Год назад

Thanks!

@striperswiper1 5 месяцев назад

Nice!

@LTOutdoors Год назад

i feel adding the keeper is the cause of flashing i normally us a clamp & clamp my mold shut to prevent it from flashing. I am curious did you paint your blades or get them already painted? if so would you do a video of painting the baldes? those are some great colors!! As always thank you for the great videos keep up the great work!!

@MattLunaFishing Год назад

I painted them myself. I just use spray paint.

@Davo2233 7 месяцев назад

Thanks for the video. I agree with everything you said basically, I would say, making your skirts cute and even sells fishermen but a jagged skirt catches way more bass! Your pretty little taper looks good to us humans but it simply doesn’t look natural to bass! Todd Castledine made a great video that lines up with my statement. I will also give credit where it’s due to Randy Blaukat! He says the same exact thing!

@MattLunaFishing 7 месяцев назад

You’re welcome. Glad you liked the video. I don’t normally have a jagged skirt, but I always shorten to make sure my trailer doesn’t get impacted by the skirt strands. Thanks for watching and commenting!

@michaelbarbieri9871 17 дней назад

Just bought a few lead molds. Do you put anything on them before pouring?

@MattLunaFishing 16 дней назад

No i don’t. Just make sure they are warm when you start pouring. Occasionally I’ll spray blaster dry lube into the mold if I’m not getting complete pours.

@T_J_Fishin Год назад

Awesome

@MattLunaFishing Год назад

Thanks!

@georgenochta3725 8 месяцев назад

Matt, what heat range heat gun do you use when setting powder paint. I have an older gun and I think I'm thinking of going down to my local HF and getting a new gun. They have several models with different heat ranges so on your suggestion I will make my choice. Thanks again for taking the time to make quality tac building videos

@MattLunaFishing 8 месяцев назад

My heat gun only has a high and low setting. Mine may have come from there, I don’t remember. I’ve had it for a long time. I use the high setting.

@georgenochta3725 8 месяцев назад

Matt, great video. I watched the very first video you had on making these baits and I noticed you have changed up the wire form you used on the first video I watched. I like this much better. Can you again let us know the number of the form used in this video. Also where are you getting your blades, as well as, the make and model for the 4/0 flipping hooks you are using. I made my first chatterbaits using the wire form you previously used and I used 4/0 VMC spinnerbait hooks. I didn't care for the resultant action of the baits I made. The blades I used were rounded vs these blades you used in this video. Appreciate any help and new material tips you can upgrade me with. Thanks, George Nochta Santee, CA

@MattLunaFishing 8 месяцев назад

The info on the components is in the description of the video. Listed out. The blades are from Ali express.

@georgenochta3725 8 месяцев назад

Thanks Matt. I located the hooks and wire forms. When I order the blades from Ali express for the 3/8 & 1/2 oz jigs should I order the medium size blades for the proper action on the finished vibrating jigs? Thanks, George

@MattLunaFishing 8 месяцев назад

@georgenochta3725 it’s been so long since i ordered them, I’m not sure. I’d measure a blade you have now and get the one that’s closest

@georgenochta3725 8 месяцев назад

@@MattLunaFishing Yeah for sure. I think I will order a small amount in S, M, & L and that will tell me what size I need. The blades I have are all the rounded edge type sold by Barlow's. Just thought you might have remembered what you used. Have a good Thanksgiving. Once I get my ali blades, I'll post what size I end up using. >+))))>

@qaze0338 Год назад

Nice work Matt as always what is the part number for those 4/0 hooks and can I use smaller hooks also ? Thx

@MattLunaFishing Год назад

The 4/0 hooks are just a 4/0 flipping hooks. Pick your favorite brand. You can use smaller hooks within reason.

@MarrKing Год назад

How long does it take to get the blades?

@MattLunaFishing Год назад

It’s been a while since i bought them. Probably couple months. Might find some on ebay

@joebee1459 Год назад

So you can put any flipping hook you want in this? Say you want an owner 5/0 Jungle flipping hook in there?

@MattLunaFishing Год назад

Yeah. Should be able to

@garrettmatthew5659 6 месяцев назад

Is there not an option for a 60* hook that fits in the mold without the wire eye? I am hesitant because I feel like that wire would bend out after too much weight or too many catches.

@MattLunaFishing 6 месяцев назад

The wire won’t bend out for traditional fishing. Hooks can work, but often opening them and the closing them breaks the hook. They don’t bend all that well depending on brand

@nickcavanaugh9586 5 месяцев назад

Put a ziptie in place of skirt band

@jimliechty2983 11 дней назад

What brand and number of the flipping 4/0 hooks that were used?

@MattLunaFishing 11 дней назад

You can use any brand you want. I think these were owner or gamakatsu

@opticalinch 8 месяцев назад

Do you have a link to that purple color?

@MattLunaFishing 8 месяцев назад

For the head of the chatterbaits or skirt?

@StevenGifford-tc9iw 4 месяца назад

I have the same mold and the same wire forms but no matter how much I squeeze the wire form it will not fit any size less than 1/2 I want to do 3/8 am I missing something here?

@MattLunaFishing 4 месяца назад

Is too long? There’s a smaller wire form out there too that’s the same design

@StevenGifford-tc9iw 3 месяца назад

It's the eye of it that's too big. I trimmed it down and that works but would the smaller one have a smaller eye ? Because that would work better. Where can I find it ? Thanks for the response bro appreciate it.

@MattLunaFishing 3 месяца назад

@StevenGifford-tc9iw yea if i remember correctly the whole thing is downsized

@StevenGifford-tc9iw 3 месяца назад

Awesome thank you!!! I'll definitely check it out.

@MattLunaFishing 3 месяца назад

@StevenGifford-tc9iw you’re welcome

@darwinanderson5047 Год назад

I use form wey 525. No need to modify.

@MattLunaFishing Год назад

I like this one because you have the ability to use a smaller hook

@ericnitz2074 Год назад

How do you fit that keeper next to the hook? Been messing around with my mold and it seems like there isn’t space

@MattLunaFishing Год назад

There isn’t space for it. You have to set it in the mold where you want it, and then slowly close the mold to pin it in place and then take a mallet and hit the mold until it closes all the way. It’s essentially modifying the mold and forcing it to accept the keeper

@ericnitz2074 Год назад

@@MattLunaFishing I see , thanks

@rosshilkemann3117 Месяц назад

Does it hunt like a jackhammer would?

@MattLunaFishing Месяц назад

There’s a lot of variables to what makes a bait hunt. Jackhammers hunt better with a thin straight tail trailer. I’ve never used that style trailer on these. You’d have to give it a shot before you’ll know for sure.

@1MoreFish 11 месяцев назад

I appreciate your video and I make my own jigs ss well. But this is just way too much time. Just assume buy em. But thanks .

@MattLunaFishing 11 месяцев назад

Really not that much more time than a jig.

@damnitman1969 9 месяцев назад

I fish for redfish with chatterbaits those wouldn’t lastblades would open hook eye for sure.

@MattLunaFishing 9 месяцев назад

You do realize this is essentially the same design as the actual chatterbait?

@pensnut08 Год назад

"Disclaimer - You can NOT sell chatterbaits or bladed jigs made in this way. Selling chatterbaits or bladed jigs made in this way will violate a patent that Zman owns.".... How about if I just pay you for "shipping and handling"?? :)

@MattLunaFishing Год назад

No i can’t do that

@phenixbaits 6 месяцев назад

lol. I still get guys calling and asking me to sell them the original Vibrator Jig.@@MattLunaFishing

@lanceaineyfishing Месяц назад

Technically patents are not only infringed upon if they're sold. It covers everything from making/using/selling or even OFFERING to sell. There have been a couple people making these that have gotten letters from ZMan telling them to stop.