Unbox, install and configure an Aruba AOS-CX 6100 switch

Подписаться 33 тыс.

Просмотров 80 тыс.

50% 1

This video shows you the unboxing activities of an Aruba 6100 switch (what's in the box), the physical installation (connecting the switch to the network and get console access), configuring the switch for remote access (SSH, HTTPS and REST), and actually testing access. Notice that I am using a DAC cable to connect up the switch. At the moment of release, the 6100 does not support DAC cables and in the video you will see how to get around this.

Наука

Опубликовано:

22 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@nickmoutdoorfun3263 3 месяца назад

This helped me out considerably. I really appreciate this as it boasted my confidence.

@chasuav Год назад

Configuring port security on the CX 6000 series is more difficult than on the 2530s. Wish the port security and show port security commands are somewhat the same or similar.

@Deeptrap1978 3 года назад

Beste Dik, mooi om te zien dat de eerste review waar ik op zoek bij een nederlander uit kom. na installaties van 3910 / 2620 en 2540 moet ik nu overstappen naar een 6100. DE meeste commando's lijken hetzelfde als op de vorige gen switches. Zie jij nog veel verschillen behalve dat je nog api's kan laden ?

@admdha9601 Год назад

Thanks for the upload :)

@bernardmohammed1428 6 месяцев назад

thanks for sharing ,highly appriciated

@soporteti1517 Год назад

How do i configure the default-gateway?? You made ping to the default-gateway but you didn't configure

@JuanCarlosValverdeCuenca 11 месяцев назад

Hello, good video, I have a problem with an aruba 2930f switch, the user changed the administrative password and forgot it, then he has reset the configuration and the user and configuration are not deleted, is there a method to leave it in the factory settings, Thanks for the help

@Mazufa Год назад

Hello! I have an HPE Aruba 6000 12G switch that I bought a few days ago. I have connected it to the computer with a usb-c cable and an ethernet cable. I have been able to connect to the switch with Putty, but when I try to log in, it doesn't work. I haven't been able to find the correct default username and password anywhere to log in. I should be able to enable WebGui and change the password and username. Could you help me? Do you know about the default username and password? Your username seems to be admin and I've tried entering it, and then I'm asked for a password that I don't know. You seem to get an option to create your own admin password right after entering your username, and I don't get this. I don't know what is causing this problem. I have a 12 port model of this switch.Thanks!

@haoyang4936 2 года назад

Hi，does switch box have a power cable ? or Purchased separately

@hermanrobers 2 года назад

A power cable is included with the order of the switch, just the exact type for your country needs to be specified during the order.

@michaelcai1833 Год назад

Hi May I ask what is the default uplink port for these switch? is it the last port ?

@craigmurray4746 6 месяцев назад

There is no default, any port can be an uplink port, though you would most likely use one of the SFP+ ports for the speed and flexibility it offers.

@andrevangijsel957 Год назад

how does this compare feature wise to an instant on 1930 /1960 series?

@craigmurray4746 6 месяцев назад

Feature wise it offers a lot more on the software side, but the cx switches are more complex to me than the older Provision based stuff like the 2530, 2540, 2930 etc.

@hectorsilva9071 Месяц назад

Good morning, how do I add the gateway to the default vlan?

@eugenehuyo-a6280 Год назад

Thank you so much

@JucieudoSilva 2 года назад

Good Morning! As this terminal was opened, I can't open the terminal, I used PUTZ but I can't point to the USB port. someone know me help.

@kylecameron9606 2 года назад

Putty is useable you need to select serial and change the COM to the one your port reports in Device Manager. Then a baud rate of 115200 needs to be set in the speed once the console opens wait a few and hit enter around 3 times an the first text line should load in.

@jorellwinslow Год назад

try using a terminal emulator find the usb port that is associated to the com port

@sangputulanang2212 Год назад

@@kylecameron9606 this way is helping me. Thanks a lot

@vincenttayas7718 Год назад

what app did you use for the USB C?

@premyslzadnik2429 Год назад

try Putty :D

@MpDay 2 года назад

is 'menu' still working in cli? This works like magic and is still available on the 2530. How about CX 6000?

@user-hm3ym7lq7g 2 года назад

This "menu" is a legacy cli menu that they abandoned and stopped developing a long time ago. It was just not removed from the software. It didn't offer the full device capabilities you could use/configure and had a few limitations that were not fixed. So you won't see it on any CX switches as they use completely different software. You may find it only on older "traditional aruba" switches once called procurve or provision.

@darkalman 2 года назад

@@user-hm3ym7lq7g bullshit That was the best feature in the Procurve switches and they should bring it back

@Bubbstar 2 года назад

@@darkalman ikr, ive configured loads of switches and everytime i used the "menu" command so i could give it an IP and then access the lovely GUI through a browser. Just had to teach myself the command line way and its horrible.

@darkalman 2 года назад

@@Bubbstar The menu doesn't have all the features, but it allowed us to configure the IP, routing, SNMP, and VLANs very quickly and efficiently and that's all that mattered.

@craigmurray4746 6 месяцев назад

The change in the CLI environment was a very unwelcome surprise for me when I got out 1st cx6100. I wanted a 2540 but Aruba had stopped selling them. The cx6100 hardware wise is a direct successor but software wise 😵‍💫😵‍💫

@hachigatsu1770 Год назад

what app did you use to connect using USB C? I tried using putty but didn't work.

@208lead Год назад

Link speed 115200?

@208lead Год назад

With Windows every new Switch would be found with a new comXX device, look at the device manager, which one is acutal. Rumors, that there's a driver which prevents this.

@danieljimenez-cb2sj 3 года назад

What's the number part for the cable console?

@hermanrobers 3 года назад

I don't think there is a part number for the console cable. The console connector on the CX 6100 switch is standard USB-C, so any USB-A to USB-C (if your computer has a USB-A port), or USB-C to USB-C (if your computer has a USB-C port) should work, as long is it is a data cable. At least for USB-A, I know there are really cheap cables that only allow charging, not data, but have not seen them for USB-C. Best to get a 'data' cable, and leave 'charging' cable.

@alexdominguez3621 4 месяца назад

Sw 6100 support DHCP server?

@iklandoyzz Год назад

Can i use ip to login the sw? But I couldn't find the default ip

@jemgempak 9 месяцев назад

You will need to assign static IP to the switch

@mrter2011 2 месяца назад

i try command line : test cable ... i think not have command . i use aruba JL677A 6100 24G CL4 4SFP+

@snooper75017 2 года назад

Thanks

@nareshkumarbhardwaj 9 месяцев назад

Nice

@lindiwesiboto263 2 года назад

Whats the default password to log in?

@chasuav Год назад

The default password is blank. Just press Enter.

@Khan613 11 месяцев назад

Everybody jumps past vlans. Aruba HP never get this right. If you add a VLAN, then try to add ports, you can't easily add all ports. Not since PROCURVE era have they had this working. YOu have to use CLI.

@craigmurray4746 6 месяцев назад

Tell me about it. On my 2540 and 5400 core switch, easy as pie. On the 6100, had to get vendor support as I had no idea what I was doing! The whole 1/1/1 naming scheme is stupid clunky on a non modular switch and makes the CLI painful to use in my view. The modern CLI seems designed for dev-ops and cloud controller etc and less for mid-level IT administrators to deploy!