UNBOXING Eduard Harrier GR.7/9 1/48 | The Inner Nerd

Подписаться 87 тыс.

Просмотров 16 тыс.

50% 1

Eduard/Hasegawa BAe Harrier GR.7/9 Limited Edition in 1/48 scale by The Inner Nerd
2016 Eduard/Hasegawa BAe Harrier GR.7 Limited Edition in 1/48 scale in box review of "What's in the box?" by The Inner Nerd. Including Eduard Brassin resin parts and Photo etch additions
This video shows and in depth “What’s in the box” review of Eduard BAe Harrier GR.7/9 in 1/48 scale released as limited edition in 2016
Items Used
Airbrush: Harder & Steenbeck Evolution Silverline Solo
Needle/Nozzle: 0.15mm
Compressor: Badger 1100 with Anti-Pulsation Tank
Working Pressure 22psi (1.51bar)
Paint: Mr Hobby Mr Surfacer 1000, Mr Hobby Mr Surfacer 1200 & Mr Hobby Mr Finishing Surfacer 1500 thinned with cellulose lacquer thinner Tamiya Acrylics thinned with Tamiya X-20A Thinner Mr Hobby Aqueous Abteilung 502 Oils - Black / Industrial Earth / Olive Green Winsor & Newton Oils - Yellow Ochre / Raw Umber / Burnt Sienna / White AK Interactive Pigments - Gun Metal, Europe Earth, Russian Earth, Medium Rust, Pigment Fixer Vallejo Masking Fluid Winsor & Newton UV Cut Matte Enamel Varnish
Brushes: Pure Sable Brush - Various Sizes
Glue: Tamiya Extra Thin Cement Tamiya Poly Cement Revell Contacta Professional Loctite 406 CA Superglue
Sanding: 3M 600p / 800p / 1200p / 2000p / 3000p sheets & sponges Tamiya Polishing Compounds (Course, Fine & Finish)

Авто/Мото

Опубликовано:

20 июл 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@TheInnerNerd 4 года назад

*THIS VIDEO USES CLOSED CAPTION SUBTITLES* so please hit that *CC* button to get all the comments on the video. Hi there. Thank you for watching the In-Box review of Eduard's 1/48 Scale Harrier GR.7/9 Limited Edition. If you enjoyed the video and want to see more please give it a Like and Subscribe for monthly updates! I would also like the give Devon Autistic Modellers Society a BIG shoutout! Devon Autistic Modellers Society have clubs in both Devon and Scotland. They are trying to start up a London club and that they need volunteers to run twice monthly sessions. If this is something you would like to support or be a part of visit their Facebook page facebook.com/devonautisticmodellerssociety/

@TheBornDrunk 4 года назад

Can you disable auto translation lol, it looks rediculos

@f-4ephantomll271 4 года назад

The plastic quality looks brilliant, can't wait to see the finished Model! 😁

@greg8946 4 года назад

This is the hasegawa kit...i do commission builds occasionally and have a few buddies who flew Harriers, I've built 4 of these. I recognised the sprues immediately and got the chills too! This thing is a bear to get right. The rear canopy deck/LEX/wing assembly is a fucking nightmare..and after that's done you have to work the air intakes into place. Lots of small bits and a ton of sanding/filling. I have a decent skill set and this kit is about the toughest I've seen. DO NOT FOLLOW THE INSTRUCTIONS for the wing assembly...there are articles on the net about approaching those steps but your on your own there...Dry fit and tape everything several times before you glue..

@TheInnerNerd 4 года назад

Yes thats right, the kit was first released 2004 by Hasegawa as an AV-8B and then re-boxed as Eduard with a bunch of additional Resin and PE parts plus the new colour schemes. So far it seems to have built fine but I've not quite got around to the really big stuff. Just sub-assembled the cocpit section and nose, then the fuselage. The wings have gone together fine too (so far) but I have noticed some MASSIVE gaps between the fuselage & wings during dry fitting and the fitting is extremely tricky with the alignment tabs etc! Thanks for the heads up and I agree that the instructions on this are a little bit crap. There is a lot of room for improvment when it comes to efficiency on this one. So far though for me it's been a great kit and I would advise other to buy. Hope you can come back to watch the full build when the video is released!

@greg8946 4 года назад

@@TheInnerNerd Yeah, it's a nice kit and builds into a pretty accurate Harrier. That boxing looks pretty sweet with all the extras..the seat and wheels looked sharp. Just a shame the wing/LEX section is such an issue. It's been a while, but I think I put the top and bottom of the LEX together first. Then I glued the bottom wing section to fuselage and dry fitted the LEX and the upper wing half until the gap was minimal on top. This left a fairly manageable seam underneath where the LEX meets the fuselage. Then I lined up the forward section, seated it into the fan blade and dry fitted the rear deck as best I could. There a few ways to approach it and your damn good so you'll figure something out...hopefully the modeling Gods will be with you👍. And I'll def check out the build video. Thanks

@williamcorban5244 4 года назад

Looks like a great kit have fun building it 👍🏻

@GregsModels 4 года назад

Ex Hasegawa kit spruced up, some great markings, looks good. 👍

@bigcharliesmodelgarage296 4 года назад

Looks like a good kit. Thanks for sharing.

@maxbrandt6 4 года назад

Gorgeous looking kit, must be a joy to build and with aftermarket goodies, quite accurate!

@TheInnerNerd 4 года назад

Yes one of my favourite kits so far! Poor assembly though a LOT of parts don't fit without alteration but still an enjoyable build! The aftermarket additions are extremely good and take the kit to another level of detail

@TheModelGuy 4 года назад

Nice review! This is on my to get list. I've read some horror stories about the wing to fuselage fit. This is the Hasegawa moulding

@greg8946 4 года назад

You heard right! I've built 4 of these. The rear deck lid/LEX/wing sections are ridiculous and have to be lined up with forward fuselage/cockpit section...then you get the challenge of fitting the air intakes... the best approach is not following the instructions sequence in those stages

@enriquevegs2924 4 года назад

Wow se ve muy bien la calidad y el acabado de la maqueta excelente diría yo!

@the-primered-thumb 4 года назад

You got this 😉👍

@sclarke978 4 года назад

Looks great. When is the build coming?

@TheInnerNerd 4 года назад

Yep pretty good kit by the looks of it. Got the cockpit complete and now onto the build of the fuselage etc so a while off yet. Sometime next month I guess

@sclarke978 4 года назад

@@TheInnerNerd I can't wait. I've seen 2 harriers fly today, one of my favourite planes of all time

@TheInnerNerd 4 года назад

I'm plannign something a little extra with this one too so may take a little longer than normal but I'm sure it will be worth it ;) I've not seen a Harrier in the air for years! There is a Spanish EAV-8B at RIAT this year I believe

@sclarke978 4 года назад

@@TheInnerNerd there were, I went yesterday. Amazing sight, haven't seen them fly in years

@Adamslee72 4 года назад

Thanks for the review I take it its hasegawa plastic? Looks awesome

@TheInnerNerd 4 года назад

Thank you. Yes its an initial Hasegawa release from 2004 but reboxed and branded Eduard for this limited edition run

@Adamslee72 4 года назад

Cheers mate I'll.have to snap this one up.asap

@michaeljdauben 4 года назад

No option for open gear wells (2:05)? Seems very poor design

@TheInnerNerd 4 года назад

The kit is designed to show the gear down but no seperate open doors which I find very odd, but if you look at some reference photos the doors are in the closed positon despite the gear being down so isn't an inaccuracy. Just seems a little weird not to have doors as a separate part like on most kits

@idleonlooker1078 3 года назад

I'm VERY disappointed in this kit by Eduard!! As for the expense, you normally expect a better quality from them!! At the moment I'm building the Hasegawa 1/48 GR Mk.7 (No. 07236) kit. This video proves that the Eduard and the Hasegawa kits comprise COMPLETELY IDENTICAL plastic parts!! The expense in justifying the Eduard kit may lie in a few more photo etch parts - which the after market Aires etch largely covers anyway (and is cheaper than the Eduard etch). IMHO this kit is NOT worth the money!! The only real difference between these kits lies in the decal sheet. Thanks for the video, it answered my curiosity of which kit was better. IMO they're exactly the same - but Eduard slugs you to pay more!! 👍

@TheInnerNerd 3 года назад

Yes this kit is just a Redbox of the Hasegawa kit with the extras and different camouflage schemes. But the plastic is identical like you said. You do also get some PE in this so it’s not just the Resin. But the price probably comes from it being a limited run and everything being in one box

@idleonlooker1078 3 года назад

@@TheInnerNerd I appreciate your view, but in this case "limited run" being a great marketing ploy by Eduard just to buy a reboxed, inferior, kit that's been spruced up with their PE. I bought the Hasegawa kit and PE separately - and the cost was still cheaper than Eduard's rehash. My view is based upon that for the pretty substantial asking price, you'd expect the level of accuracy and detail expected of an Eduard engineered kit - not a cheap and nasty rebox of Hasegawa's 2004 offering.