Unboxing Ultrasonic Mist Maker: Fog maker circuit testing/ Ultrasonic humidifier maker kit low price 

How it works perfection, for we who just took one apart for a project and didn't know better until now. Awesome video for its tight focus, execution, and usefulness (to me).

Fantastic. This is exactly how an 'in breathing circuit' ultrasonic nebulization machine works. The device is housed in a clear plastic housing, the piezo element is exposed to a small chamber where 5 ml of Bronchodilator (Asthma) medication, is added. The chamber has 2 connector ends (a standard circular connector has 22 mm outside diameter, 15 mm inside diameter) which goes in between the inspiratory tubing and the ventilator. Every breath takes micron sized particles of the liquid drug to the respiratory tract. This device proved very valuable to covid patients on ventilator. Please be inspired to make one. Good luck

*humiditer We liked it **Fastly.Cool** so much in the basement, we bought a second one for the main level. The amount of moisture it pulls out of the air is astonishing.*

Would it be possible to add a second mister in series with the first? Or is there a way to add on more ultrasonic elements to this circuit such as amplifying the out put frequency and adding additional channels?

is there a way to make it work without driver circuit

My original intention for this humidifier was to use it for plants that require high moisture levels. After using it in my room, ru-vid.comUgkxtD9aJ2m6GU-X1IChQxjn9l31K1A7Kpwj however, I think that's where it is going to stay in the fall and winter season at least. The increased humidity in my room made the room warmer and more comfortable. I had first ran the humidifier for 4 hours with the timer setting for it. After the first hour, I checked my room and can feel the difference. When the full 4 hours was up, I checked again and noticed that the humidifier was shut off as it is suppose to. The moisture level never seem to get passed 56/57%. I then let it run until all the water is used up, which it wasn't all used up. There are still some left in the base that you are not suppose to add water to. I filled up the water tank all the way again, being careful when removing it from the base. Some left over water may spill out. After putting it back on and setting the unit to auto, I let it operate. It didn't stop running, rather I don't know if it did at any point since I didn't check it regularly, for 24 hours after which the water in the tank ran out. The moisture reading never passed 56/57%, which may be a good thing for me. Being situated right next to my bed, the noise was not very noticeable with the occasional water gurgle from time to time as the unit ran.

Hlw sir can i used it for nabulyzer??? What is your Opinion??

Olá vc já tentou na posição horizontal? Gostaria de usar na miniatura como escape do caminhão miniatura

So I bought one , but the mist I’m getting is not even close to what you got there , can I fix it or no

Hi, are there any small holes in the vibration mold? thanks.

hello sir vibration wala kaha sa milega

Set this device in front of fan... Its helps

How to bay it

What is the price of this. Humidfer

If you put a dye in the water will it spray coloured water eg: black dye for simulated smoke?

I have an old mist part. But i doesnt spray. Do you know what's the problem in my mist?

Bhai kha se buy kare batao na please 🙏🙏🙏🙏🙏🙏

My one isnt sprayng water why is that ?

Does the water stay cool or heats up?

malamig po ba siya?

I have to make a working model of water cycle so if i make the river , will this remain ok [ matlab ye kharab to nai hoga na jab hmlog pani me jyada der rakhe to ? ]

¿por que no lo conecta directamente a la batería 5v y ya? ¿POR QUE LA COMPLICACIÓN?

Can I decrease my room temperature slightly with this??

Can I use wall fan and these units to cool down get cool air, is it?

Bhai Kaha se mangvaya

Hello sir..

Do you need a special control for that, or just dc voltage will do it?

Can we immerse the disc entirely in water ? Or will it get damaged if we dip it entirely in water ?

Can I make a cooler using it? Is the fogg cold enough?

Can i put ice water bro is there any problem by using cold water on it plz reply?

For Purchasing, no link you provided

Maybe you can do your on nano automated alcohol mist dispenser that will be cool to make

Plz price

Can u teach me how to solder tge wire to circuit

Link batao bai

Is this make atmosphere cool?

What is prise

Kahan sa mily ga

Bahi ha kdr mala ka muja Bata o

Can i add more strips to this module?

12v battery possible?

Ye kitne ka aata hai please bataa do

It emits hot or cold steam

Ye jo niche carpet hai usko kya khte hain or kha se le skte hain koi please btana

یہ ڈسک کس جگہ سے ملتی ہے۔؟

Would you please inform me power (volts value) on Ultrasonic Mist Maker

It is humidifier heart.

Maker bajar online mein aata hai ki nahin aata please batao na 😎

Fogger ceramic disc প্রয়োজন, আপনি কি সাহায্য করতে পারবেন কোথায় পাবো বাহ অনলাইনে কোন পেইজে পাবো

the fog cool or hot?

Please keep the circuit diagram for this

Bro Will It Charge My 2000mah Lithium Battery

How is buy

सर इस वीडियो को बनाने का आप का क्या मकसद है परपस है कृपया बताएं

can I turn it on with no board?

ए स्मोक मशीन कितने रुपए की आती है

এটি দাম কত হবে বলবেন

Order kha sa kara

1 please

As gajit ka name kiha

Kahape milega

Product ka link do na please 🙏🙏🙏

what circuit did u use?

Piezoelectric disc price in market

Khredna hai kaha milegi 😢

What happens if there ks no water and the humidifier is still working

Iska rate batao aur kha milega

Is this mist cold or hot?

Kenar link ta dao

Link dal lo

Kahan sy milta h adres

Saw the price and iam flabbergasted 1,2k some even goes for 1.5k lol... For what?

Only white thing

You got cheated by online youtuber . You can buy full diffuser set at that price.

প্লিজ নাম্বার দেন ভাই।।