Uncovering the Secrets of Pile Foundations & How They Support Structures

BEng The Brazilian Engineer in Australia

Подписаться 13 тыс.

Просмотров 9 тыс.

50% 1

In this workshop you will learn how to: read geotechnical reports, design piers, gain insights into practical limitations on site and understand how your decisions above ground impact on the design below: benginaustralia.com/foundatio...
In this video I’m gonna go over some basic points that you should be aware of when designing a pile.
Let me know in the comments if this video was useful to you :)
Inside this video, I'll cover:
1. Introduction (00:00)
2. Piles use (00:27)
3. Piles classification as per AS2159 (01:00)
4. Exposure and durability (02:10)
5. Pile actions - Axial and Lateral loads (02:36)
6. Axial load capacity (03:00)
7. Pile Bearing capacity - Base plus shaft capacity (03:30)
8. Bearing vs friction vs both (04:05)
9. Base bearing capacity (05:02)
10. Shaft bearing capacity for clays and sands (05:59)
11. Uplift on piles (09:48)
12. Lateral loads on piles - bending moment (11:38)
👉🏼 Learn how to design a Retaining Wall step by step (Ebook): payhip.com/b/kwHZf
👉🏼 Get my Structural Inspections Checklist: payhip.com/b/RK9lG
👀 Get my FREE Ebook: payhip.com/b/oF2Nz
👀 Get my FREE Resume Template: mailchi.mp/08545d269150/freeb...
Donate directly via Paypal:
paypal.me/brazilianengineer?l...
Follow me on Instagram for weekly structural inspections stories:
Instagram Profile: / beng_gabriel
📧LinkedIn Profile: / gabriel-r. .
If you don't want to miss my next video, make sure to subscribe to my RU-vid Channel:
ru-vid.com/show-UCi8e...
Purchases made from store links may give me a commission.
(It doesn’t cost you extra)
Engineering books I recommend:
Concrete structures - amzn.to/3C03JVr
Steel Designers' Handbook - amzn.to/3jcoGUq
Australian Guidebook for Structural Engineers - amzn.to/37j6iUl
Mechanics of Materials - amzn.to/2ViBssq
Craig's Soil Mechanics - amzn.to/3rJceiU
Fundamentals of Building Construction: Materials and Methods - amzn.to/3CcBi70
The Australian House Building Manual - amzn.to/2Vx8be2
#structuralengineering
#civilengineering

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@everydayconstruction 2 дня назад

well explained! Enjoyed it

@bengthebrazilianengineerinAus 2 дня назад

Thanks :)

@dhavalshah9353 Год назад

Thank you Gabriel! Great video and super helpful :)

@claremckechnie5623 Год назад

so well explained, all the important stuff and very informative, thankyou

@bengthebrazilianengineerinAus Год назад

Thanks Clare. Appreciate the feedback

@JanushAdabjou 2 года назад

Amazing content! Really helpful for young engineers starting out in the field!

@bengthebrazilianengineerinAus 2 года назад

Glad it was helpful! Thanks for watching :)

@lesleyhiddins2067 2 года назад

Hi Gabriel(?) I found your channel by searching for building guides in Qld Aus. I am renovating my old Miner's cottage and doing a crash course in construction/building. I am not a builder or engineer but your explanations are giving me a greater understanding of what I need to know in order to understand this process. Watching and rewatching all your videos and really learning, thanks so much

@bengthebrazilianengineerinAus 2 года назад

Thanks Lesley. Glad the videos have been helpful to you. Renovating a cottage myself would be a challenge with my limited carpentry skills. Good luck with the project.

@sx2000 2 года назад

This guy Engineers! More please!

@daffo911 3 года назад

Great videos mate. Just thought I'd mention that for downwards loads, AS 2870-2011 G5.3 states that "No side adhesion or friction should be assumed to exist to a depth of 0.75Hs for down loads" which I believe is to account for the depth of the cracked zone.

@bengthebrazilianengineerinAus 3 года назад

Hi Elliot, you're correct. Hs is the depth of design soil suction change and it's also dependent on the climate, So this value change from city to city. I personally don't take the side adhesion into consideration for short piles (residential) design. Thanks for your input

@ian-S 3 года назад

Boa irmão! Vídeos sempre interessantes. Keep up!

@bengthebrazilianengineerinAus 3 года назад

Valeu pelo apoio Ian. Grande abraco

@JamesKay238 Год назад

Great videos, I have watched almost all of them. Can you make another video or refer me to another text or video explaining the design of reinforcement for piles in residential use? Engineers generally add reinforcement when the pile depths are greater than 1.5m-2.0m but I would like to be able to quantify this.

@bengthebrazilianengineerinAus Год назад

Hi James, thanks for the support. I will do a video on that. Yeah usually minimum reo will suffice for resi projects.

@jimboreaddabible777 Год назад

Do they ever use cris- cross piles in addition to vertical to prevent leaning/ tilting? Or at a 30⁰ angle around outer perimeters in addition to vertical in center?

@favo3090 Год назад

i will highly appreciate if you could give us a video on Reinforced concrete design of piles in different design methods

@bengthebrazilianengineerinAus Год назад

great idea.. Thanks for the suggestion

@edp6364 Год назад

BEng - fixed support at the top of a pile would induce M1 and V*. By ignoring e=1.5D at the top of the pile, so technically the total moment (M*) would be = M1 + M2 where M2 = V*1.5D ........eg M* = M1+V*x1.5D?

@bengthebrazilianengineerinAus Год назад

Are you referring to minimum eccentricity? I usually design for the greater of both values.

@madinazt 2 года назад

How come builders just pour them into the soil without having a vapour barrier as they do with the slab and footings? I thought moisture from the ground can damage the concrete and it will lose its structural integrity

@bengthebrazilianengineerinAus 2 года назад

The vapour barrier prevents moisture rising through the soil and getting into the house. We are not concerned about that when it comes to concrete piers. See the footings for bridges under water. Bear in mind that if the pier is reinforced, adequate cover must be maintained to protect the steel.