Update on: HOW TO FIX your Lego Technic Porsche 911 RSR - Lego Set

Подписаться 9 тыс.

Просмотров 74 тыс.

50% 1

This is an update video where I cover-off the lowering & roof fix modifications for the Lego Technic Porsche 911 RSR model in more detail to provide extra information and answer the most commonly asked questions posted in the comments section in my original video.
Instructions to lower the model can be found here: rebrickable.com/mocs/MOC-2140...
** Note: If for some reason the designer's site is down or the instructions download link has expired please contact the designer directly on Rebrickable via a message. I don't own or manage the instructions for the lowering modification - they are the IP of the designer RB-instructions. **
Video breakdown:
00:00 Introduction to the update
01:07 Lowering mod instructions & step 4 update
04:58 Lowering mod comments
07:43 Roof fix in more detail (corrected steps)
10:14 Final comments
LINKS!
BrickLink, the site where you can buy the Lego parts needed for mods shown in this video: www.bricklink.com/v2/main.page
The Eurobricks forum topic for this set that shows other cool mods for this set that fellow Lego enthusiasts have come up with: www.eurobricks.com/forum/inde...
The video by RacingBrick on his lowering mod for the Technic Ferrari 488 GTE set: • LEGO Technic 42125 Fer...
Lowering mod parts list (with extra parts for step 4):
3705 x2 - Technic, Axle 4, Black
2780 x 12 = Technic, Pin with friction ridges, Black
4519 x2 - Technic, Axle 3, Light Blueish Grey (you can use the 3L axles removed from the front suspension that I recommend replacing with the 4L axles - versus buying these parts)
32291 x4 - Technic, Axle & Pin connector (cross-block), Light Blueish Grey
3713 x4 - Technic, Bush, Light Blueish Grey
63869 x2 - Technic, Cross Block 3x2, Light Blueish Grey
My roof fix extra parts list:
6558 x2 - Technic, Pin 3L with friction ridges, Blue
18654 x2 - Technic, Pin Connector (1x1 beam), White
My Flickr & Instagram:
Flickr - www.flickr.com/photos/1606550...
Instagram - / crafted_bricks

Хобби

Опубликовано:

25 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 156

@lukeriley4101 Год назад

Did the roof conversion and can’t believe how much better it looks for such a simple conversion. Thank you so much

@CraftedBricks Год назад

This is one of my old videos - but it's still great to hear from people who have modified their set with the changes I suggest! Thanks for letting me know and all the best to you for the week! Cheers, Simon

@wimkranendonk8472 2 года назад

The porsche now looks great really COOL. thanks for sharing this great idea.

@shawncarr9855 3 года назад

Thanks for this video. My wife just bought me this kit and I have ordered all the parts you listed to make these mods. Much appreciated.

@CraftedBricks 3 года назад

No problem Shawn - I'm glad you found this helpful. Enjoy your build!

@RicardotomcatPinheiro 3 года назад

Great video once again, loved the step by step explanation with the lego manual.

@CraftedBricks 3 года назад

Thanks Ricardo I appreciate that! ...I'm working on the next video now, it should be out soon!

@chrisboyadjian 2 года назад

Thanks for the information and video. Just purchased this Technic set, and ordered the parts to make the modification. Can't wait.

@CraftedBricks 2 года назад

No problem at all Chris. Although this is an older Technic set, it's still a looker and it looks especially good in it's modified lowered stance!

@Forza_F1 3 года назад

thank you very much for this mod, drastically changes the stance and look of the model

@CraftedBricks 3 года назад

No problem Matthew, I'm glad you found this useful and were able to modify your own set!

@Mikes67Chevy 3 года назад

Very nice update video, great job! The video is perfect!

@CraftedBricks 3 года назад

Thank you very much!

@DangerMouseFN 6 месяцев назад

What a great video! I've just stumbled upon it whilst building my own 911 RSR. I've completed both the roof mod and the lowering mod per your video. Thank you for the information on these. I've also figured out a way of moving the light 'bug eyes' inward by 1 stud and back by 1 stud. It makes the lights sit 'in' the car a bit more, so they don't sit so proud of the bodywork.

@CraftedBricks 5 месяцев назад

It still surprises me, given this is one of my older videos, just how many people watch it and benefit from this video and mods. I'm chuffed to hear that you modified your set including your improvements to the headlights, sounds great! : )

@thechosenone3246 3 года назад

Thank you very much ! Very well explained You make me happy a second time after build this beautiful car Appreciate this

@CraftedBricks 3 года назад

No problem Guillaume - I'm glad the mods and building the set bring you joy!

@keithrouleau2398 3 года назад

Thanks so much for the PARTS LISTING! I'm taking that right to BrickLink to order!

@CraftedBricks 3 года назад

Excellent Keith! Have fun modifying your model!

@markwilkinson6519 Год назад

Just did the roof mod, really pleased looks so much better..was left with 2 of the small gray plugs after main build so used them on the black struts that now plug into the porsche sun visor..fits just right.

@CraftedBricks Год назад

I'm really pleased to hear it Mark! And that despite this video being about 2 years old its still of use to people. Have a great weekend ahead!

@marcfew2148 6 месяцев назад

I just did the lowering and the roof. I love it! thank you! I built the car a year ago and hated the stance. Now it doesn't look like a rally car. Next, I'm going to do my Sian and use the 9 upgrades that I see online. Thank you again for your guidance on the 911 RSR! By the way, I didn't notice how bad the roof was till I did your upgrade. What a difference!!

@CraftedBricks 6 месяцев назад

Now your comment was definitely something that put a smile on my face this morning. I'm very pleased to hear that these mods have put a smile on your face and that your RSR looks much better. I still love my set, that lowered stance makes such a difference. Thanks for sharing. Cheers, Simon

@FloVTR 2 года назад

I didn’t even realise the gap until I saw this video! All fixed as per this video so Thankyou for that! Just building the Ferrari then I’ll be ordering a bulk of parts for the multiple Technic models I have.

@CraftedBricks 2 года назад

I'm glad I could help Mike! Did you lower your RSR as well? The model looks so much better and more aggressive in its lowered stance. Good luck with your other builds and mods!

@FloVTR 2 года назад

@@CraftedBricks I will be lowering it yes once I’ve completed the Ferrari build all of the Technics I have will receive mods and additional parts etc (so I can just do one bulk order of parts) I think Lego made them high for the playability but as you I display mine so the lower stance will 100% be better.

@stevenhunter7619 2 года назад

Thanks you very much for this video. My parts have finally arrived and I have completed it, I'm very happy with the new look of my Porsche.

@CraftedBricks 2 года назад

That is great to hear Steven! The lowered stance makes this model look so much better doesn't it!?

@stevenhunter7619 2 года назад

@@CraftedBricks love your reviews and was hoping you had a solution to the poor suspension on the Bugatti model

@CraftedBricks 2 года назад

Hi again Steven, the suspension on my Bugatti model is a bit different due to me building JB70's version of the model. But I did find the suspension on the front still 'sticks'. Swapping out the 3L blue pin in the control arm assembly for a light tan frictionless pin did help (but did not fully fix it), see here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1qWy5Uygv5A.html

@Casinosquare 7 месяцев назад

I took the two 8x1 pieces off the sump guard underneath too, as when you lower it, it grazes the floor. Great Modding!

@CraftedBricks 6 месяцев назад

It's been a surprise to see people checking some of my older videos. But that said I still love this mod, so simple and yet effective. Good to hear that not only have you lowered your model but have made some further adjustments. All the best and thanks for sharing!

@michaeldavis187 3 года назад

Parts ordered and sorted the roof 👌

@CraftedBricks 3 года назад

It always warms my heart to hear that people are taking on and enjoying these mods! Nice work Michael!

@UManIsC2daK 3 года назад

You should make it transform. Love the video!

@CraftedBricks 3 года назад

Pfft! That's totally impossible Udara! Haha

@phamdienphuong 7 месяцев назад

i love this video ❤

@zindrolin 3 года назад

Like to look of it lower but don't like to have springs always compressed. Planning to do some modifications myself, like power functions, and as it seems there is enough room to move springs one stud higher to make wheels go higher. But will know more once i get to it and will share my solutions

@CraftedBricks 3 года назад

That sounds good David. One of the things that is great about this hobby of ours is that there are always multiple ways to fix, improve and personalise any Lego set, enjoy your tinkering!

@mannion1985 2 года назад

I took 4 cable ties and used them to set the suspension exactly where I wanted, without modifying the model at all. Will do the roof mod, though.

@CraftedBricks 2 года назад

I love your 'MacGyver' approach to lowering the set Mannion1985! Well done and I hope you like the roof mod.

@pastoralanb 3 месяца назад

Thanks for the video. I'm not bothered by the suspension profile, but the roof line mod is excellent. I simply switched out the two white 1x1 beams that were supporting the rear engine access lid with the black ones from the original plans, so all I needed was the two blue beams. I really like the way it improves the looks.

@CraftedBricks 3 месяца назад

It always puts a smile on my face when I see a comment like this! I'm glad I was able to help and that you are happy with your modified model. All the best...

@pastoralanb 3 месяца назад

@@CraftedBricks You know, I gave the model a second look, and since I had the parts I tried out the suspension mod. You're right, it makes the look of the car much better. Thank you so much!

@emracingatp 3 года назад

And try to invert rear wheels, inside rim shape of the wheel is much more agressive :)

@jakecarville7218 3 года назад

Just done this, think it looks much better

@swagie_ 3 года назад

I always do that, i don't even know why lego used theme the "normal way" this time

@treemanfan7718 3 года назад

What and how do you mean by invert rear wheels?

@emracingatp 3 года назад

I mean turn around rear wheels

@charlesmohan3130 3 года назад

Great video and thoroughly explained! But would you be able to provide any insight on how to modify the headlights or any instructions to do so? This would be highly appreciated :)

@CraftedBricks 3 года назад

Hi Charles - at the end of the video I mention that there are a lot of people over at the Eurobricks Forum who have done headlight mods for this set. See the link to the forum post on Eurobricks dedicated to this set in the description of this video. I think you'll see several great ideas on how to mod the headlights there! : )

@charlesmohan3130 3 года назад

@@CraftedBricks Awsome! Thank you very much 😊

@wimkranendonk8472 2 года назад

Hello Sorry I didn't read the manual properly. To lower the rear of the Porsche it was described. Thanks for the response and keep up the good work. Kind regards Wim Kranendonk

@CraftedBricks 2 года назад

Excellent, I'm really glad to you all worked out ok. And I agree with you this model look so much better in a lowered stance!

@Jangshock 2 года назад

All done now! Thanks again…;) As it has no hoG-steering, it‘s really better to lower the car, as it‘s mainly there for exposition… You know where one can change the front lights? ;)

@CraftedBricks 2 года назад

Hi Jang, so good to hear that you've lowered your RSR. Another satisfied Lego enthusiast! There's a link in the description of the video to a EuroBricks forum topic for this model. There are lots of great ideas there for modifying the headlights. : )

@Jangshock 2 года назад

Super video. For the height modification, can it be done AFTER the car was build a first time, please? Thanks!

@CraftedBricks 2 года назад

Hi Jang, I only just saw this comment. Yes you most definitely can lower the model, very easily actually, after you have already built it. Cheers, Simon

@bam13sept 3 года назад

There is another solution for lowering the car. I replaced the yellow strutts with the grey ones, they are much softer and the car sits low.

@CraftedBricks 3 года назад

Sounds good Alex - there's always multiple ways to mod any set, good idea on the alternate shock absorbers. : )

@mikeb3315 2 года назад

I'm was looking at putting lights in this car... But I'll be doing these mods 1st. Do you have a video on putting lights in?

@CraftedBricks 2 года назад

Hi Mike, do you mean an LED kit? If so, no I've not lit up this set. I notice that Light My Bricks have a lighting kit for this model, I've found their instructions are always very clear and easy to follow. So perhaps an option for you? www.lightmybricks.com/products/lego-porsche-911-rsr-42096-light-kit

@shahanmohammad6228 Год назад

Hey crafted, just wanted to ask what exactly steps 3 and 5 are asking you to do in the suspension lowering? Is it asking you to push the axle to the right in step 3 then to the left in step 5? Thanks for the video mate

@CraftedBricks Год назад

Yes that's exactly right, the designer is asking you to shift the axle over to the right in step 3 so that you can fit the assembly in step 4. And then in step 5 the designer is asking you to shift the axle to the left up through the assembly. It's been 2 years since I looked at this! But from memory I recommend you double up on the assemblies placed in step 4 so that you have one either side and use a 4L axle. I hope this makes things clear!

@fredverkade1 3 года назад

Nice video again...but I still get the idea that the front wheels aren't centered in the wheel arch, and I mean from front to back..the in front is bigger, one bushing should do the trick...if I build this set again i will try it out and of course I'll send you the results... maybe I'll build one with minimal suspension and a low stance.... success with the next video

@CraftedBricks 3 года назад

Thanks Fred - good luck with your modding efforts! I'm going to leave my model as it is now, I've too much other work and models to focus on. : )

@fredverkade1 3 года назад

@@CraftedBricks I know....I have the Ferrari, the McLaren...the code reader...the claas...and another few🤪

@rpm_ozzy9843 2 года назад

very nice thanks but i have a last mod and that is that on the real car the exhoust is more to the side and not in the middle so please make one more updated version where the exhoust is in the right place

@CraftedBricks 2 года назад

Hi Oskar, thank you for your comments! I love it that you are enthusiastic about this set and want to mod it even more, that's what our mod community is all about! I won't be doing another video however about this set, I have other videos and new content that I am working on. 🙂

@MADABOUTBRICKS Год назад

CraftedBricks, I MUST DO THIS ASAP. Along with several other of your suggested modifications… Do you plan on getting a hold of the new 1:8 scale Ferrari?

@CraftedBricks Год назад

Oh yes I think you will be happy with the lowered Porsche! And yes I definitely will buy the new large scale Ferrari at some point. I'm trying to better 'manage' my Lego spending at the moment, it's all gotten so expensive. I also still have to build my Sian! Have fun modding!

@MADABOUTBRICKS Год назад

@@CraftedBricks I totally agree with you! Especially lately with all the amazing sets they’ve been releasing, it’s hard to catch up (financially and space wise)

@kevinpeterson1398 3 года назад

Woohoo! I'm almost famous! lol 😁 Thanks for the shout out and I do appreciate all the work you have been doing. Good luck in all your endeavors 😁👍

@parsasalmasy 2 года назад

Just another thought, instead of buying the parts, is it possible to completely cut the springs from the suspension or remove the spring. That way there’s no force pushing the car upwards?

@CraftedBricks 2 года назад

Hi Parsa, yes I think that could be possible. And someone else commented that they were going to try the same thing. I would worry however that I was going botch up my parts and possibly not get the result I wanted. Luckily the parts needed for the lowering mod are very common and not expensive at all.

@MikeBlue77 2 года назад

Anyone know how to fix the steering? Probably one of the worse in a Technic set.

@brucetaylor7085 2 года назад

I have just obtained the model and ordered the parts that you recomend from Britlink. Are there also modifications to the rear suspension necessary in order to lower the car?

@CraftedBricks 2 года назад

Hi Bruce - the instructions from RB-instructions cover compressing/lowering the suspension for both the front and rear axles. So yes both the front and rear suspension will be modified. It's a very simple mod but makes this model look so much better!

@xAdi420 7 месяцев назад

I just bought this set and am planning on using it as a display piece. Can't I just put in some weight to compress the springs instead of doing this mod?

@CraftedBricks 7 месяцев назад

You would have put a lot of weight on it to lower it, and what would you use? ...the mod is incredibly easy to do and you only need a handful of parts. Have a look at the instructions provided by the guy who did this mod and you will see how easy it is, all the best with your build!

@warrenader27 3 года назад

Very nice, but why not just remove the round white part at step 467? Then you can push the black pin in 1 more stud, giving it the same outcome.

@CraftedBricks 3 года назад

Hi CJWarr3n - yes you can do that if you like. But I went with using the 2L pins with axle approach as otherwise you can see the ends of the exposed 2L pins with the stop bush through the gaps in the roof at the front near the Porsche sticker if you push them through. You could of course hide the ends with some 1x1 round beams if you like but this is fiddly to do if you have already assembled the model. The great thing about Lego is there are lots of different parts and ways to tackle any problem or mod your set!

@hamzah4454 10 месяцев назад

Hello mate, great video here. Just wanted to ask how do I purchase the extra parts? Where can I find these specific extra parts and how do I order them? Is it best to order a whole box/lot of spare technic parts? I can’t seem to find where to buy the parts from. Thank you 🙏🏼

@CraftedBricks 10 месяцев назад

Hi Hamzah, you can order Lego parts from BrickLink! Link here: www.bricklink.com/v2/main.page ...I have a whole tutorial video on 'how to buy Lego on BrickLink', look it up on my channel if you get stuck. Also you can look at the tutorial/help page on BrickLink here: www.bricklink.com/help.asp?topicID=35 It may seem a bit daunting at first, but just think of BrickLink like 'eBay for Lego', once you find your items and place an order with a seller you will see that it's very easy and is a good skill and knowledge to have, especially if you intend to mod other Lego sets or build some of the wonderful custom creations that are out there! Good luck!

@hamzah4454 10 месяцев назад

@@CraftedBricks thanks for your help, I appreciate the fast reply - I’ll be sure to check out the video. Thank you 👍🏼

@CarsAviation 3 года назад

So do it still have substation when lowered?

@CraftedBricks 3 года назад

I think you are asking if the suspension has travel after it is lowered. No it does not. Have a look at 1:56 in the video.

@projectr12 7 месяцев назад

Hi, is there anyway that I could do the lowering mod without the extra part? It's kinda hard to find lego spare parts here.

@CraftedBricks 7 месяцев назад

You'd have to figure out how to compress the springs using something like wire? I'm not sure, it's up to you. The parts you need (have a look at the Rebrickable page I link to in the video description) are very common and can be found on BrickLink or even in most Technic Lego sets. Good luck!

@Detail_Den_UK 3 года назад

The magenta link has expired so the PDF with the instructions to do this mod has gone.

@CraftedBricks 3 года назад

Hi David - per my note in the description of the video please contact the designer of the lowering mod via Rebrickable if there's any issues with his site or the download link. He'll get the link fixed, he seems very friendly and willing to help.

@bijannassir8980 3 года назад

"you need to buy these parts on bricklink" *laughs in giant tub of spare bionicle parts* seriously though, thank you for this! I was disappointed in the look of the wheels until now!

@CraftedBricks 3 года назад

No problem Bijan, even a year later I still look at my modified model and love how the lowered version looks. It's a simple but highly effective mod to do. Good luck finding the parts you need in your giant tub of Bionicle parts!

@jakecarville7218 3 года назад

Have you forgot to put the part no. 63869 in your part list in the description for lowering the car? Instead of doubling up on the front I just used one of the part no. 32291 for the back

@CraftedBricks 3 года назад

Thanks Jake, that's one of the lowering mod parts for the rear. I've added it into my list now. Re using part 32291 for the back, sure, there's always many ways to achieve a similar result with different Lego parts. Nicely done!

@victortai7987 Год назад

Can this be done to set 42056? Orange porches

@CraftedBricks Год назад

Hi there, you don't need to lower the large scale orange Porsche. I do have an older video on building a modified version of that set (#42056), you can see it here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-clQCWTpaY-c.html

@vishalballi 3 года назад

Because of the initial video I decided to buy the 911

@CraftedBricks 3 года назад

It is a very good set! Later this year I plan to do some videos on the larger scale Porsche, Bugatti & Sian models : )

@sauravgupte6734 3 года назад

good choice lol

@DannewK 3 года назад

what about the lights? they need a mod too then its very nice!

@CraftedBricks 3 года назад

Hi Michael, did you watch the conclusion of the video? I talk about where you can find ideas/mods for the head lights!

@wimkranendonk8472 2 года назад

How to lower de back of the car. I don't see it how to. Please help

@CraftedBricks 2 года назад

Hi Wim - did you download the instructions from Rebrickable? It's a very easy mod to do, everything you need to know is covered in the designer's instructions on how to lower the model. Let me know how you go!

@harrisoncox2383 3 года назад

Will you be doing any other modifications to this model

@CraftedBricks 3 года назад

Hi Harrison - no not for this model. But I am gearing up to modify and shoot a video on the larger Porsche GT3 RS set : ) I'm just waiting on parts to arrive + to get some time.

@harrisoncox2383 3 года назад

That sounds great

@retro4550 2 года назад

i have an issue with the front fender as one of the pieces twist and its really annoying

@CraftedBricks 2 года назад

I bet that is really annoying! Sometimes if you have a damaged part, you can contact Lego and they will send you a replacement.

@retro4550 2 года назад

@@CraftedBricks i figured it out :)

@claudiomelani2623 2 года назад

having the same issue how i can get this parts ?

@CraftedBricks 2 года назад

Hi Claudio - you will need to order the parts from BrickLink. There is link to BrickLink in the description of the video. And on the Inventory tab on the modification page on Rebrickable it shows you the parts you will need to have or buy to lower the model.

@Jomari_Idioma 2 года назад

Can you help me fix my Bugatti chiron? I want to remove the slip gear and basically end up with the one that the sian have. Please

@CraftedBricks 2 года назад

Hello there, I'm sorry something as complex as modding a Technic set can't be done remotely. I recommend you have a look at the Eurobricks form to see if someone has posted up information about what you want to do. Try here first: www.eurobricks.com/forum/index.php?/forums/topic/162092-42083-bugatti-chiron-mods-and-improvements/

@tammysporry7076 3 года назад

not sure if anyone else gets this, but when i go to the magenta cloud download link it says hat the link already expired... does anyone now why this is?

@CraftedBricks 3 года назад

Hi rock3t-a5ylum - I've contacted Remo (the designer (RB-instructions) on Rebrickable to let him know, he should have it back up soon, I hope. I've also put a note on the description of this video recommending to contact the designer via Rebrickable if they have a future issue with downloading the instructions from his site. Thanks for the heads-up!

@tammysporry7076 3 года назад

@@CraftedBricks nice to see i could help

@Immortal2-03 3 года назад

I am almost done building and am trying to fix an issue. The issue is when the rear wheel or tire spins it scrapes other pieces can u help or will I have to re take apart the whole thing

@CraftedBricks 3 года назад

Hi Uchiha, It's a bit hard to help without being able to see your model or say a photo of it. I assume the issue happens after you have lowered the model? Can you see the parts that the rear wheels are scraping against? For my model there's no scraping at all.

@Immortal2-03 3 года назад

@@CraftedBricks yeah what’s the best way of contact that o can send it

@CraftedBricks 3 года назад

My contact details are in the About section of my Channel.

@Immortal2-03 3 года назад

@@CraftedBricks ok

@Immortal2-03 3 года назад

@@CraftedBricks I just checked and don’t see it where else can I find it

@Slushy0099 2 года назад

dose work

@mrdurva9532 3 года назад

I went to the link to get the instructions and parts needed but it's giving me an expired link error

@CraftedBricks 3 года назад

Hi Mr Durva - checkout the note I put in the comments section of this video. If there is a problem with the link you'll need to send the mod designer a message on Rebrickable to ask him to fix his site. I don't have any control over it unfortunately so I can't help.

@mrdurva9532 3 года назад

@@CraftedBricks I've tried and unfortunately it doesn't work for my region so I guess I will have to message the user and hopefully get a response

@CraftedBricks 3 года назад

@@mrdurva9532 the designer seems pretty responsive when I've messaged him when I was making this video. He's based in Germany. I believe he wants to have his instructions on his own site so that he can showcase his other MOCs and Mods, I understand it. But it would have been better if he'd have gone for a normal publish on Rebrickable for this free mod. I hope he get's back to you soon!

@crustednoodlewitha6206 2 года назад

the car is real rsr isn’t low this means the lowering is turning it into the normal road going one with the rsr bodykit

@crustednoodlewitha6206 2 года назад

i will admit it dose look nice low but the car is raised irl

@CraftedBricks 2 года назад

Meh it looks great lowered! I hope you try the mod out Layton I think you'll like it 🙂

@scorpionjb4ever 3 года назад

step 467 u just cant take the round whitr thing out and push inside the black pin no need to replace. and white round things u use in blue pins

@CraftedBricks 3 года назад

Hi scorpionjb4ever - I've covered this before in another comment reply. If you remove the 1x1 round white beam parts and simply push the 2L black pins with the stop bushes in, the ends of those pins are visible through the roof at the front which looks odd. You could in theory fiddle around and put the white 1x1 round white beam parts on the ends of those black pins in the center area of the roof to cover them up, but this is difficult to do when the model is already assembled. It's easier I think to use the alternate pins I've suggested. The great thing about Lego though is that you can solve a problem many different ways!

@scorpionjb4ever 3 года назад

@@CraftedBricks yes but i added 2 extra white tound parts. So looks great now

@CraftedBricks 3 года назад

Sounds good!

@turrboenvy4612 3 года назад

I just finished building my set, and I think you're needlessly overcomplicating the roof mod. All you need to do is 1) remove the toggle joint from step 466 and 2) move the outer white part from 467 forward one block onto that red axle. Then you can simply remove the rest of the subassembly from step 467. No extra parts needed.

@CraftedBricks 3 года назад

Hi turboenvy, I see where you are going with your take on the mod. Sure that is a valid option! But doing this way may mean that the line of the 19M flex rod that gives that curve to the roof and A-pillar may look a bit off. That said the great thing about modding Lego sets is that there are always multiple ways to tackle a problem and you are free to mod your set in any way you want to!

@gk8110 2 года назад

I'm not one to crap on anyones parade but i found an even better way to modify the roof to get rid of the gap, no extra parts necessary and no parts removed from their original location, I believe it to be a better, sleeker outcome.

@CraftedBricks 2 года назад

Hi GK - the great thing about our Lego hobby is that there are always multiple ways to mod and improve sets and it's often up to personal taste. Do you have a video or photos published online of your alternate solution?

@gk8110 2 года назад

@@CraftedBricks Not yet but is there an easy way I could send them to you?

@CraftedBricks 2 года назад

@@gk8110 - I'm always happy to hear from fellow LEgo enthusiasts! You can find my email address on the 'About' page on my channel. : )

@gk8110 2 года назад

@@CraftedBricks No email there, I'll DM you on Insta Tomorrow.

@CraftedBricks 2 года назад

About > under the Details section, click on 'View Email Address' > click the Re-captcha then you'll see my email. I just don't want to publish my email address on comments. Or yes sure you can message me on Instagram if you like, no worries.

@NukaCola05 Год назад

Am I the only one who has problems with the rear wheels rubbing when you push it backwards?

@CraftedBricks Год назад

Hi Tyson - I'm assuming this is for the lowered model? I don't recall having that issue, but to be fair I just have my model on display in a cabinet, I don't play with it. Can you see what the rear wheels are connecting with? Maybe the body work or chassis on you model needs some adjustment?

@peterpaolini 2 года назад

Brick link is in German

@CraftedBricks 2 года назад

Hi Peter - what do you mean by this and can I help you? BrickLink is in English. I think you mean RB-Instructions site where he hosts his mod instructions. Yes he is German and that site is German. If viewing his site via Google Chome right click on the page and select to Translate to English/or your language. But this is not really needed - just click on the bottom link to download the PDF instructions.