Upgrading Your Main Fuse

Подписаться 424

Просмотров 3,4 тыс.

50% 1

#vartiaelectrics #electrician #mainfuse #100amps
Welcome back!
Today we go through the application process to get your main fuse upgraded/ uprating to 100 amps.
00:00 - Introduction
03:14 - How to find your dno
04:30 - How does your supply enter the property?
05:02 - Do you have a single or 3 phase supply?
06:26 - What is your current fuse rating?
07:06 - Is your new device 3 or single phase?
07:46 - What is your service cable rating and type?
09:01 - Do you have a looped service?
10:31 - What is your max demand?
11:40 - Does your device have load management?
14:17 - What size are your meter tails?
15:49 - Electrical system photo
17:08 - Isolation switch
Get in contact today.
Tel: 0208 144 1428
Web: www.vartia.co.uk
Instagram: ‪@VartiaElectrics‬
#vartiaelectrics #electrician #mainfuse #100amps

Опубликовано:

28 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 16

@essexandy189 13 дней назад

Gotta say you explain it very well makes it a lot easier than some off the others iv’e seen

@Adam-oy1vp 6 месяцев назад

Very informative

@elless317 День назад

Hi, very interesting and well explained. About the service cable, is otfen wrapped in that greasy strip; is a way to know its amperage(maybe from external diameter?) . Thank you

@allahdittababu4802 11 месяцев назад

Your really good and clear with explaining each step ... Thanks made alot of sense

@tonyrobinson362 8 месяцев назад

Thanks not quite straight forward having a charger fitted thanks for info.

@Leeroytrucks01 2 месяца назад

Do i need landlord permission to do this ? Also my fuse box and meter are not in the same room. Is this a problem?

@VartiaElectrics 2 месяца назад

Hi Leeroytrucks01, the landlord would need to grant permission and most likely have to make the call. The meter not being in the same room does not cause any issues. Please be aware if the fuse is going to be uprated the meters tails may also need to be uprated. Kind regards Vartia Electrics

@Mike_5 Год назад

Did you upgrade the main fuse yourself or get the DNO to do it?

@VartiaElectrics Год назад

Good Afternoon Mike, We got the DNO to upgrade the main fuse to 100amps. Kind regards Vartia Electrics

@AthiestProphet 4 месяца назад

How much average to upgrade to 100?

@Mike_5 4 месяца назад

@@VartiaElectrics nice one

@VartiaElectrics 4 месяца назад

@@AthiestProphet Hi AtheistProphet, In this case the meter tails (main cut out to meter and meter to fusebox) were only 16mm2 and needed to be uprated 25mm2 to support 100 amps. The DNO charged the client £170 to do this and fitted an isolation switch. If the meter tails are a sufficient size for the relative amps, DNO's don't normally charge to uprate the fuse. Please get in contact if you have any more questions

@user-we1hp2uj5x 3 месяца назад

Spenergyworks want a long and complicated form filled out. I gave up, how is a normal person supposed to fill out that! I already have a pod point fitted so it’s not as if I can ask the fitter. I don’t even know who it was. It’s very silly. Now I just wait for the main fuse to blow then they do t have a choice but to come fit a bigger amp fuse.