No video :(

UPHILL WELDING PIPE GATE HINGES (MOTION, PASSES, RODS)

Подписаться 237 тыс.

Просмотров 568 тыс.

50% 1

THE PIPE FENCE COURSE IS OPEN!! Back out on-site today uphill welding on pipe gate hinges. While we work I’ll talk a little about the welding method I use, method, how many passes, and type of welding rod.
PIPE FENCE COURSE - www.arossweldi...
TEXT ME - (405) 643-7176
AROSS STORE: www.arossweldi...
My favorite tools & gear - www.arossweldi....
------------------------------------------------------------------------------------------------------------------
AROSSWELDING TRADESCHOOL - www.arossweldi...
Free Course Example - www.arossweldi....
------------------------------------------------------------------------------------------------------------------
Free Resources - www.arossweldi...
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
JOIN THE INNER CIRCLE: arosswelding.m....
Details about the Inner Circle: arosswelding.m...
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
AROSSWELDING.COM - www.arossweldi...
NEW CHANNEL WITH QUICK TIPS AND TRICKS
AROSSWELDING SHORTS - www.youtube.co....
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Social Media links - come hang out after hours.
My Instagram: / arosswelding
My Facebook: / arosswelding
Our vlog channel: / austinandkayla

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 275

@leecrawford6393 Год назад

Boss I’ve been around welding my whole life and I have never seen a stick weld as neat as what you do. Excellent work buddy.

@papis_dad1847 2 года назад

I’m not 100% sure but I believe your videos introduced me to pipe welding a few years ago. I’m 17 now and if all goes well I will be heading off to welding school in a few months. I just want to say thank you for everything especially all the cool tips,tricks, and I side view to welding 🙏🏼

@caydenynclan1209 2 года назад

same here brother, first class in 2 weeks

@djoseph7164 Год назад

It will be the best choice you will ever make welding is the best job

@ironc5194 5 месяцев назад

Practice off hand welding in school it’ll save you out in the field and make you look like a stud, good luck 🤙🏽

@jimlundstrom2986 2 года назад

I appreciated the tips on laying the bead. The closeup of your weave pattern was great. Info on what rods you are using, up hill or down hill, and determining the correct heat never gets old. 👍👍

@arosswelding 2 года назад

Good to know. Thanks for your support! And thank you for watching!

@kirkalley3469 2 года назад

My favorite tip was hanging the Stinger on my pants pocket! I was constantly setting it on the ground and then picking it up. For some odd reason that never occurred to me. I might even incorporate a small utility or hammer pouch to hang the Stinger when I need hands-free to adjust a magnet or something..

@6pekXX 2 года назад

@@arosswelding I agree with the above comment! Thanks for sharing, showing and explanation Austin! It's nice to see some arc shots, though not so close up, show us more of them please! Very educational !Thanks a lot sir! God bless you and your family!

@yeet3071 Год назад

A little late but I'm almost certain that's 7018 because the 3 black dots most 6013 would have green dots

@hobtink Год назад

First time in 8 or so videos I’ve seen you weld the way I was taught uphill. Looks good enough for the girls I go with.

@billarroo1 2 года назад

That's great when you actually show with your hand and rod your technique of uphill welding, "keep it going", GREAT VIDEO, Thanks

@rehmangusandapiary9024 2 года назад

The best ARoss video to date! I appreciated focusing on the welding process as well as good video of the uphill welding technique. Previous videos consist of the camera being too far away making it impossible to see the welding. Thanks and keep it up!

@arosswelding 2 года назад

You bet! Thank you for watching!

@tyleradamson7242 Год назад

Brother you sure are entertaining. I’ve worked on drilling rigs for 8 years in the gulf, roughneck and derrickhand, came home to be with my family so I’m working in a boiler now. Love watching your videos, I bought me a little Deko welder just to learn, and you sir are solving my uphill problems. Earned my sub! You, and the millennial farmer are my normal watches now!

@arosswelding Год назад

Thanks for the sub! And thanks for watching! I’m glad you have found the videos helpful and entertaining lol!

@aarongriffin6326 Год назад

i love your positive attitude and calm demeanor. one of the few genuine people on RU-vid. keep on being yourself bud!

@MrPipeliner99 2 года назад

What a great attitude. Keep your head in the game. Instead of setting home waiting on the next big pipeline project which isn't going to happen. Your an example of putting your skills to work and probably making more money doing this and home every night.

@derekseiders3597 Год назад

Another thing to consider when hanging gates is of the gate is used while there is snow on the ground some guys around here like there gates hung alittle high so they can open freely with snow on the ground

@airpowderchannel7681 2 года назад

I'm a diy welder around the house u just inspire me to keep doing new projects thank u

@trentcoleman1089 2 года назад

Watching your videos is relaxing after a 12 hour day in the fab shop ☕️🤘🏻

@beaubowlin7081 2 года назад

Austin I just love the attitude you have and the upbeat motivation you show on how to do a professional job even when things don’t always go your way. Keep up the good work and look forward to more videos bud!

@arosswelding 2 года назад

I’ll sure do it! Thanks! And thank you for watching!

@mr.matthews67 2 года назад

I'll be keeping you and your family in my prayers. I have learned a lot from you and your channel I appreciate everything that you've done. God bless.

@paulshuppert4975 5 месяцев назад

First thing they did when I started as a sheet metal worker, was to stick weld 16 gauge round fittings together. Used 6011 3/32 rod. First things I ever welded and I totally believe if you learn on light iron it's easier to go heavier

@teis79 Год назад

Who needs a TIG machine when you can weld uphill with 7018 like you do! Wow that's the best looking uphill 7018 weld on the web!

@kerryevans7413 2 года назад

Great information on the Gate install video. Love how you showed the welding technique as you described what your doing.

@scottmorris2601 2 года назад

“A little bit of undercut…..I reckon it’ll be OK”. Haha, if I laid a bead down like that I’d dislocate my shoulder patting myself on the back.

@rockyshoffner8216 2 года назад

The quality of your arc shots are amazing I would like to see more

@MasterHustler 2 года назад

Great video Austin. I always learn from your videos including a file works better than a chipping hammer. Thank you.

@shad6057 2 месяца назад

That Weld is extremely clean & Tidy. Thank you

@berwidwhitaker221 Год назад

Great weld from a master welder

@noride11 2 года назад

Good on you man! like you, I have transitioned from mostly pipe, to mostly everything else but pipe... Life goes on!

@olddawgdreaming5715 2 года назад

Thanks Austin for another good lesson on hanging a gate. Looks great, Fred.

@arosswelding 2 года назад

You bet! Thank you for watching!

@James-fs4rn 2 года назад

👍 nothing but respect! That big ol gate looks like it could benefit from a support wheel. Thanks for sharing. Hope the family is ok.

@the_boatswain 2 года назад

Cool to see you burn rod. I remember further back I don't think teaching actual welding methods was really your thing, but yeah - good stuff man.

@rustyshahan935 2 года назад

Thanks for showing the process up close. Nice job sir.

@arosswelding 2 года назад

You bet! Thank you for watching!

@gaildimick1831 9 месяцев назад

If I could weld half that good, I’d feel great. Nice work.

@monkfry 2 года назад

Squeezing every inch out of that rod like you did reminds me of tacking stay silv ends together to make another rod. Nice work, Excellent business name!! 👍

@assabetmetalfabrication6143 2 года назад

Like how you use a regular welding helmet instead of a pancake helmet which is really used for pipeline work Great work and good advise with always a sense of humor

@djamison9888 2 года назад

The shade on your camera's filter is just right. I can see the puddle. Undercut on this (not critical) is better than lack of fusion..

@workonitm8 2 года назад

Thanks for the tips Austin. Always appreciated.

@arosswelding 2 года назад

You bet! Thank you for watching!

@robertboykin1828 Год назад

Hay, I dig that grease fitting on the hinge.

@sargentslaughter3509 2 года назад

You did a fine job there sir , keep up the good work.

@richardfuerst5286 2 года назад

"Eyecrometer" 😂😂😂😂👍 Love it! We don't have those in Michigan. I'm going to check Ebay!

@randyknighton772 2 года назад

You can put a head rack on the front of your bed and a removable one on back. I store the rear one behind my machine sort of like a Hoosier pole

@morganweller1491 2 года назад

Nice Arc shot and rod manipulation video one of the best actually

@rksando1 Год назад

I might have hung it a little bit higher. In Oklahoma the vegetation will grow in and get in the way when you open and close. The welds look great. I still haven't mastered vertical 7018 so I would have probably used 6010.

@codynapper2498 Год назад

Great video. I just discovered your videos and thank you for your tips and knowledge. Lucky you don’t have to contend with snow pack in winter. It’s a killer on gates you can’t adjust the height.

@abelmendez8603 2 года назад

You are a good teacher sir!

@FirstLightAdv 7 месяцев назад

That's crazy amazing weld!

@jamesoliver6625 Год назад

First objective is to make the opening full width usable by the client and that determines the minimal positioning of the gate (to get it opening beyond the gate posts).

@ridinrocks 23 дня назад

I gotta work on my vertical and overhead great stuff man

@danilomalagayo236 2 года назад

Great ideas for sharing us your technique to Gain Knowledge. Thank you very much.

@arosswelding 2 года назад

You bet! Thank you for watching!

@clifbrewster8822 Год назад

I'm not worth a crap going up the hill I'm going to try your advice out by what you said I think I'm running to much heat thanks for the info I need it

@oliverhill84 Год назад

Definitely a skill to learn as you'll never know when to need it. I got my welder last week and have some cool blobs and popcorn splattered everywhere lol

@shemwayman1146 Год назад

VERY NICE WELDS... SIR ,,THANK YOU.

@elisan6838 2 года назад

You gotta do what you gotta do to get the job done ‘ awesome!!!

@arosswelding 2 года назад

That’s right

@cutweldngrind 2 года назад

I need to build a similar gate for my ranch but steel prices have sure climbed. The main entrance I have has a 13ft height clearance so I must open the second highway entrance to get heavy machinery in. Cool video again.

@rogelioramirez6675 2 года назад

I love ur videos always I learn something....thanks again.....

@arosswelding 2 года назад

You bet! Thank you for watching!

@jejunjohn 2 года назад

You’re a good teacher!

@botsbass842 2 года назад

Know why i like aross videos? You work a lot like i do and it makes me think my ball and chain job might not have me by the balls forever. You ought to make it so that piece of pipe bolts up to your trailer so you can leave it leaning on the side of the barn until you need to haul another gate.

@BMGProjects 2 года назад

Thank you for the welding pointers!

@txdoodlebug 2 года назад

I have been loved tenderly by the Oklahoma DOT. You keep this up and you will be too.

@TBizzell68 2 года назад

I can’t wait to see what you come up with when you build the new bed

@arosswelding 2 года назад

Oh me neither… I’m more than ready…

@matbillings2533 2 года назад

Eyecrometer. I like that! :)

@arosswelding 2 года назад

Pretty slick ain’t it lol

@imgamegame3560 2 года назад

I love that rig brother thanks for the content you give us stay blessed

@geneautry2091 День назад

That's my favorite position. 3g uphill 7018

@_MK_Machines.Co_ 2 года назад

🔥 Always learning from you Ross! 🔥

@arosswelding 2 года назад

Good good! I learn from all of you also! Thank you!! And thanks for your support!

@frisbeephil Год назад

Finally welding at 13 minutes in.

@kevinbrowne1278 Год назад

Wow that was a nice looking cap!

@steveyray8852 2 года назад

Great video mate. 🇦🇺

@joshskelton2101 2 года назад

Ingenuity at its best with hauling that gate…

@martyshannon7542 2 года назад

The Highway Patrolman would be impressed. Red flag on gate. Check. My Daughter -In-Law is a CHP in Cali.

@gmartinez2555 2 года назад

Awesome job that weld looks great. Ain’t going nowhere.

@thomasbartlett6771 Год назад

You have the best unlimited attitude and techniques that I have found online. Great videos and keep them coming!! BTW, what electrode polarity were you using? It sounded like DC current.

@LawtonDigital Год назад

Your little finger knows more about welding than I do, so I have what may be a simple question. Why not use 6010 for your root pass to get more penetration? Awesome video, thanks!

@Verificador119 Год назад

nice weldings,nice job,keep enjoing!!

@obfuscated3090 2 года назад

If you make a mast (whatever style ya like) to hold signal lights on the trailer where they'll be visible (see DOT regs etc) with a load that can be seen from behind you're legal and safer in poor visibility. LED worklights are cheap these days and also benefit from being raised up.

@FAUZIAKBAR89 2 года назад

Gate nya simpel..and minimalis sir 👍🤝 indonesia🇮🇩🇮🇩🇮🇩

@joesanchez4599 2 года назад

You should show a video on how you center the hinges on the post and get the hinges in line with each other

@florentinorenteria588 2 года назад

Nice weld AR

@placesucantgoadv2579 2 года назад

Hey, I just did gates yesterday

@arosswelding 2 года назад

Nice

@jsulaicawesttexasbeekeepin9860 2 года назад

Great video

@scrapbmxrider16 2 года назад

Putting food on the table is the most important thing. Get after the mods on rain outs

@arosswelding 2 года назад

Word

@emirajdinovic36 2 года назад

That looks really good man 👍🏻👍🏻👍🏻

@nickycritic5269 2 года назад

Man I wish you were closer. I sure would like to do a couple projects with you. Good stuff, keep it up. 👍🏼

@hemiram05 2 года назад

Great arc shots!

@sanchoberto 2 года назад

Beautiful welding amigo

@dongonzalez8325 Год назад

the weld is beautiful

@robg836 2 года назад

I got myself a Martin Bros shirts on your recommendation...Great shirt

@arosswelding 2 года назад

Good deal! I’m glad you like it! I love the mountain cloth material.

@charlieronk7909 2 года назад

Thanks for the tips for sure. Beautiful beads!

@arosswelding 2 года назад

Thank you for watching!

@jonnyonthespotwelding979 2 года назад

Hey “A” man, I’ll be hanging the first set of wrought iron gates this weekend. I’ve made some of the gate jigs (they’re a little different) like your set. This will be the first time I’ve done this type of work. With your videos, and your insight, I think we’ll do ok. Wish me luck. Hood down lights on.

@arosswelding 2 года назад

Nice! Good good! I’m glad to here the videos have been helpful! Good luck on the project. I bet y’all will do great 👌

@israeltorres8603 2 года назад

please show in one of your videos what you eat out there in the field , do you have mini grill?

@razorfame9523 2 года назад

Wish I would have watched this before taking my vertical class because I had to figure that out on my own

@fuckingpippaman 2 года назад

"little bit of undercut" ahahhahaha. From an ex-ndt tech visually is surely satisfactory

@danclay8229 2 года назад

Considering the material condition I was expecting that first pass to be with 6011 then the 7018 cap. I suppose it is a non critical gate hinge though.

@the_borax_kid2233 2 года назад

Remember to throw a caution flag on that gate. Gotta love it bud keep it up 💯. Nevermind I saw them flags.

@markfoster6110 2 года назад

Dam good job young man ! Greetings from down under

@arosswelding 2 года назад

Thanks for watching!

@dominicchavez6995 2 года назад

Great work , and you explain really well . I enjoy your videos and I learn some good tips.

@arosswelding 2 года назад

Thanks. Thank you for watching!

@isaiahvaldez5103 2 года назад

badass welding man nice bead

@raycurren3639 2 года назад

Cool stuff. You should start signing your gates somewhere inconspicuous. AR in weld. Lol. There that cool. Keep up the good work

@caeltonjeffreys2242 2 года назад

Ready for the bed build

@johnniecarter5764 Год назад

Hey Bub… I’m new to your channel. You do a great job with everything from quality of work to explaining the process at hand. I’m 44yrs welder by trade. Most of all my work had been structural/Millwright shutdown work. I’m curious if you would recommend someone such as myself to jump into working solely for myself. “Into days economic status” I have no interest in outages/shutdown work. I’m more interested in gates,Equipment etc….. any feed back would be greatly appreciated. Thanks

@4peaksfab 2 года назад

I’d love to see you build a new bed 🤙🏻

@zer0coolninja887 2 года назад

Great stuff

@Jengoboys603 2 года назад

Hello from NH great channel dude

@Cristo_Mario Год назад

Thanks for a great video. When doing portable (with gen) welding - why do you prefer to use a stick welder instead of a mig welder?

@tobyp6974 2 года назад

Found lots tips I’m only Learning properly use to weld years ago but only to temporarily fix stuff until I could get someone to fix properly. Now I’m learning to do it all myself. When welding I’m having trouble with the slag I can’t get it of like u what am I doing rong