Using a Trailer Valet 5X

Подписаться 8 тыс.

Просмотров 21 тыс.

50% 1

The Trailer Valet 5x is here to hopefully make our trailer shuffling days easier. In today's episode, we're taking a break from the car projects and reviews to take a look at a Trailer Valet 5X Trailer Mover. We were super curious if this piece of equipment could move a dual axle, medium-duty trailer, the kind that's too big to move by hand but too small to use heavy equipment on. To make matters worse, we need to use it on soft gravel and grass. So what do you think? Can the Trailer Valet 5X stand up to Upstate Idaho? Join us to find out!
Link to buy the Trailer Valet 5x: amzn.to/3ypl2y5
We receive a small commission if you use the link above so click away and support the channel!
Subscribe to the channel for project builds, real reviews, and adventures / @motorsandmischief
See the Trailer Valet 5x on Trailer Valet's website: trailervalet.com
Follow Uncle Jake's adventures as he cuts firewood way out in the wilderness: • Firewood Adventure | C...
Get a full review of the new 2020 Ford Expedition: • 2020 Ford Expedition M...
We upgrade a CF Moto ZForce 800 Side-by-side: • CF Moto ZForce 800 Tra...
Follow us on Instagram! @mischief4all for sneak peeks and behind the scenes!
Malicious Mischief exclusively uses Epidemic Sound for all of our videos. They handle all of the copyright and legal use so we can just focus on giving you guys great music. Check them out: www.epidemicso...

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@robertcourtney6913 4 года назад

Wow this thing is really cool! I didn't know such a thing existed. This would make getting my boat in and out of the garage so much easier cause it requires a lot of maneuvering. Thanks, great video!

@MotorsandMischief 4 года назад

Thanks! And yeah as The Director noted, they have a huge variety of those movers, some are full on little robots. Totally should check out trailervalet.com. We're not sponsored by them lol as Uncle Jake pointed out but we do think their products are awesome!

@lauracarpenter363 Год назад

Thanks for the video. You addressed basically everything I was concerned about. Do you think it will work on a gravel incline of about 10 degrees for 7 inches of ramp?

@DoctorTorque 5 месяцев назад

If it's fairly loose gravel, I kind of doubt it. If it's a heavy trailer, it's hard to get the whole thing moving without peeling out. I did get a hand crank for it, and it was easier to start slowly. That drill was spinning too fast, and was hard to control. If it's hard-packed dirt, and the trailer isn't too heavy, it might work. It's hard to say.

@idahomountainelk 2 года назад

Just remember…Idaho!…and it’s 49 bitches! Sweet trailer dolly.

@johnky100 2 года назад

Just saw your vid. Thinking of getting one. About the drill kicking like that, was the drill on low speed?

@MotorsandMischief 2 года назад

We asked Dr. Torque and this is what he said: "It was on the lower speed, on the lower geared connector of the Valet. I couldn't have moved it any slower than that with the drill. Later, when I got the hand crank, it was easier to go a bit slower. It kicked like that because I didn't keep the brake handle completely at the highest point, and the Valet was applying the brake. I think it was a bit touchy, and maybe they all don't apply the brake as easily." Hope that helps, thanks for asking!

@wildbrosNW 3 года назад

Well thats a whole lot better than pushing and pulling!

@skapunkoialternativeliving6522 Год назад

Actually it does work you guys doing it wrong. It doesn't work in debt or mud. It's on only flat services maybe on a hill but on flat surfaces so you're doing it wrong

@MotorsandMischief Год назад

You might not have watched the whole video but we figured it out and it worked great. Been using it for years now and we quite like it. But thank you for the comment!

@DoctorTorque 4 года назад

Just think if we had sponsors...

@wildbrosNW 4 года назад

Haha! One day man

@DoctorTorque 4 года назад

500 lbs tongue weight and 5000 total weight.

@MotorsandMischief 4 года назад

Like 3-ish Uncle Jake's for tongue weight and like 30 Uncle Jake's in total capacity.