Using CHIRP to Program your Handheld Ham Radios, AD#38

Подписаться 129 тыс.

Просмотров 174 тыс.

50% 1

Use your programming cable with CHIRP software from chirp.danplanet.com. I show how to download memories, change them, and upload. Also how to transfer from one radio to another. Subscribe: / @davecasler . Ask Dave Playlist: goo.gl/inaQeB. This video is not sponsored.
To learn more about me, visit: www.dcasler.com/about/
Tip jar (on my website): www.dcasler.com/tip-jar/ (describes both how to use the RU-vid method and provides a method to use your credit card via PayPal)
To pose an Ask Dave question: www.dcasler.com/ask-dave/ or www.ke0og.net/ask-dave/
To order the old Technician videos on DVD: dcasler.com/how-to-buy-technic...
The music is "Sour Tennessee Red (Sting)," courtesy of RU-vid Music Library, by John Deley and the 41 Players.
Technician training videos, see www.ke0og.net/training/
General training videos, see www.ke0og.net/general/
Amateur Extra training videos, see www.ke0og.net/extra/
List of the Ask Dave videos, see dcasler.com/ask-dave/#askdavelist
My primary website: www.dcasler.com
The ham radio part of my website (direct link): www.ke0og.net
My publishing website: www.mtsneffelspress.com, where you can find my fantasy and science fiction books, as well as some local history books I publish for the Ridgway Railroad Museum and the Ouray County Historical Society
My Amazon author page, which lists my print and Kindle books: www.amazon.com/-/e/B00471I0Q4.
And I'm now reading (producing) audiobooks! See my first effort here: goo.gl/0GTHsW
I'm often asked what equipment I use to create the videos. The devices include the Panasonic DMC-G7 camera, Panasonic HDC-TM90 video camera, Tascam DR-05 audio recorder, Audio-Technica ATR-3350 lapel microphone, Sony Cyber-shot DSC-W560 digital camera, the Kodak Zi-8 video camera, my iPhone 5S, and Pentax K100D DSLR. Software used: CyberLink PowerDirector 13 on a Toshiba S55-A5294, also using Smoothdraw 4.0.5.0, FastStone Image Viewer 5.3, FastStone Capture 8.0, Audacity 2.1.1, LibreOffice 5.0.4.2, and Ink2Go 1.7.2. You can see how my studio is set up by viewing • Tips for Making Instru... .
Twitter: @dcasler

Наука

Опубликовано:

19 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 323

@RJTruax14 6 лет назад

Great video. Nobody in our county knows how to program a dual band two way ham radio and I took it upon myself to learn how. This video was extremely helpful and made me feel prepared.

@johncollins2955 3 года назад

Thanks so much! Just got a new radio, cables, and went through this whole process. Could not have done it without you!

@lawman4life1 3 года назад

Hello Dave! Your videos were a life saver for getting Chirp to work on my Wouxun RG-UV9D (PLUS) HT. The wallpaper is awesome on your laptop. Thanks!!

@deancovey8193 4 года назад

went and picked up the "red" cable just like you said in the video before followed all the steps and it worked, Thanks for the great video, the videos are going on about 4 years old I didnt expect it to work but I said what the heck give it a shot it's worth it for 20 bucks for the cable, and it worked!!! Thanks

@MrGreblin Год назад

thks for this info, found this while I was taking a break from studying for my technician's license and found this info very useful for the chirp program and its use

@H.pylori 5 лет назад

Very helpful video for those of us new to CHIRP and HAM. Thank you.

@1fanger 7 лет назад

Hello Dave, I used the info in this video and was able to program my Luiton LT-898UV with the Chirp software. It is helping me to utilize this strange little menu driven radio with no knobs and buttons that I am used to. I was able to utilize my old recycled Dell OptiPlex 785 with Windows 7. It went off with almost no problems, except my old analog brain. I will be passing this video on to others. Thanks so much. KC3BXZ Joe

@ismael5902 5 лет назад

Best video of programing out there, I have seen some videos and I didn't understand until I saw this one

@gghutton 7 лет назад

Dave this is an impressive background. Thank you.

@jetgriff 3 года назад

Cheers Dave after watching hours of stuff and nor really learning anything.. I tried this and ... superb instructions, thank you thank you.. everything I wanted here...

@CassandraCarter 5 лет назад

Wow, I've had a Wouxun and been using their confusing software all along. This is much better, big thanks!

@GCasey 6 лет назад

Thank you for this tutorial. I just got my Baofeng programming cable and disc in today's mail. It was not working for me so searched RU-vid. Your video got me unto speed and cable works fine with Chirp.

@IssacFitch317 4 года назад

Where do I get the cable

@neilbailey2893 3 года назад

Thank you, a very clear and helpful video. I have been attempting to programme UK Marine Band channels into my Baofeng, but found guidance elsewhere very confusing. Your tutorial has answered most of my queries, although the Simplex/Duplex/Offset allocation is still a bit confusing!

@polymath5119 5 лет назад

Thanks for this helpful CHIRP and cabling overview. The cloning methodology is reminiscent of Motorola codeplugs.

@teknotech 3 года назад

Great video, Dave, thanks for the thorough treatment of this, I hope to do it almost as smoothly as you did!

@paulbowsher4873 2 года назад

good luck with that, the video left out important steps that stopped me in my tracks......WHERE do you find the "COM PORT", mine came up empty, zip, nada.

@BBaldwin 2 года назад

@@paulbowsher4873 Mine is empty, as well, and won’t let me upload radio info. Getting an error 3. Very disappointed..

@stephenwilliams5201 4 года назад

Tks Dave. Just getting back again and chosen the small radio to listen on and a fM( portion) radio is a plus. Hi hi De kv4 li.

@Uneedhelp91 5 лет назад

Thank you for taking the time and putting quality into your video. The lighting for the chroma key and the chroma key was very good. The sound is also really good. 10/10

@davecasler 5 лет назад

Thank you. I've worked hard on those.

@Uneedhelp91 5 лет назад

@@davecasler I just bought a few bf-888s to use on the frs bands at church. I need to program them to the frs bands before I use them so thanks!

@markdoyle8713 3 года назад

PHINEAS J WHOOPEE YOU ARE THE GREATEST. I have been trying to program my HT’S for SATs and have struggled getting the new ISS pl tone into my various radios . Now I get it. Thank you. I may have dated myself with the above pop culture reference. Your 3D blackboard is your antenna software.

@fetzinger10 3 года назад

This is the most how-to guide to Chirp, I´ve seen a lot of them in the last few days! Thanks David!! One question: can you set up a spreadsheet beforehand (without the radio plugged in), save it as an img.file and import it to the radio later on? I really want to take my time with this and do it in multiple steps.

@scooterjes 7 лет назад

Chirp will let you have multiple tabs open at once so you can copy and paste the contents/items from 1 radio into another. A quick tip when you download the repeater list put it in a separate tab and use the copy/paste function to move it over so you don't accidentally overwrite the memories in you radio. It also has a few premade requency list for like the NOAA Weather, National calling frequencies ect.

@davecasler 7 лет назад

Thanks for the additional info. CHIRP is amazing.

@brucelagergren1338 3 года назад

Great Video, Excellent Speaker, makes it easier for me now, Thanks

@davidw4346 Год назад

Just what i needed. Thanks

@faizalshamchannel9779 3 года назад

really good video sir....hopefully learn a lot from you...

@chuckbradley1 4 года назад

Excellent information. Thanks.

@freddieballesteros7912 Год назад

Awesome Dave, very nice mformative video.

@kc5lvz 5 лет назад

Great video Dave

@darrenbergeson7037 2 года назад

Hello, David what programming cable do you recommend? Your video was great, thanks for going at a speed that’s easy to follow for a beginner!

@ky4tgtodd203 3 года назад

Great info! Thanks! 👍🏻

@Hunter-xy6qq 7 лет назад

Dave you're videos, are always very informative. What type of camera, do you use during filming.

@davecasler 7 лет назад

I've just started using a Panasonic DMC-G7. I'm pretty happy with it so far.

@michaelmessina4700 6 лет назад

Dave i got the cable for my UV-82HP and downloaded CHIRP and runtime. When I go to the radio drop down I dont get the option for which "port" to use. I noticed on the video you have "com5" . Mine just says bluetooth. Any thoughts? It doesnt see my radio. It says something went wrong Any help appreciated.

@flyfisherman3649 3 года назад

Hi Dave - just got a uv-5r plus to start my HAM journey. Out of the box I can't receive much of anything. Will CHIRP program (and make the config changes) the needed frequencies to receive communications from those broadcasting or do I need to manually enter these in CHIRP? Any help would be very much appreciated.

@jayextarys8616 6 лет назад

CHIRP is the best under Linux! It works perfectly for all radios I've tested.

@larrywhere6413 3 года назад

Using Linux Mint 20 and can't get Chirp to load, Ideas?

@scottscott5301 5 лет назад

Thank you very good info!

@Randomalia 5 лет назад

I love the LDS subliminal programming there on the monitor.

@davecasler 5 лет назад

It's a photo of the front of the St. George temple.

@Randomalia 5 лет назад

@@davecasler I live in Eagle, Idaho, so I see that phrase on the side of the LDS buildings all of the time.

@radioguy19510 2 года назад

Great video. Could you do one on how to upload .csv files from repeater book to chirp? Thanks.

@fnordhorn 2 года назад

So i could use this to open to the MARS or Civil Air Patrol (CAP) Freq as I am authorized to use them

@susanmuse3991 3 года назад

Thanks. Got both of my Baofengs programmed easily. Cannot however get my Kenwood TH-K2 to connect. Tells me can't open port, access denied. Any ideas on what I'm doing wrong?

@anthonysiner372 4 года назад

Hi Dave this is Anthony siner. I am trying to download stuff from my radio onto the computer but the work is not showing up and it is giving me an error message how can I fix that?

@albertlupogan1641 3 года назад

Thank you..its great job..God bless you..

@DonDegidio 7 лет назад

Dave, Great job with the CHIRP demo, especially showing how to move memories from one brand HT to another. WB3BJU

@davecasler 7 лет назад

Thank you

@frankkilbourn7991 2 года назад

I ordered a cable from the factory of the radio uv5r is that the right cable to use with Windows 10

@gretchenrussett2755 3 года назад

Hello, I was able to program my baofeng handheld with chirp just fine but I am getting an error when trying to program my Tenway UV-5R Pro with chirp - error states that the radio did not respond. Any thoughts on what I am doing wrong? Thank you!

@kj4mfw 7 лет назад

Dave- Great video. What is the cable you have that works with Beefing/Windows 10? The one I use requires me to change drivers every time I program it. 73s KJ4MFW

@davecasler 7 лет назад

The "red" cable comes from PowerWerx. See ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nzkFVtyttKM.html

@ZOMBIEHEADSHOTKILLER 3 года назад

i still have questions, such as .... why? is this reprograming the tone of the received signal noise? is this so you can identify the source of the signal, based on the different tones? im not sure what this programming is doing.

@AngelRodriguez-wi2sx 6 лет назад

I use Ubuntu Linux and don't have the windows connect problems. I have chirp installed and a Baofeng UV-5RV2+.

@lioii 3 года назад

I just bought a Wouxon KG-UV9K and my Kenwood TH-F7 (or TH-F6 in the US) programming cable works with the Wouxon radio and software without any issues. I tried CHIRP but it didn't work for me, the Wouxon software is also free and easy to use...

@Richard93449 4 года назад

Dave I just got the UV-9RTP by Baofeng. I had to wit 45 days to get the program disk and cable since my other cables wouldn't work. My problem is, I finally got CHIRP to recognize my radio, but when I go to change my frequencies, CHIRP uploads them to the radio, but after the upload is done, I still have the factory programmed frequencies on there and I can't get it off of frequency mode and on to Channel mode.... HELP

@saullopez6942 2 года назад

I would love to get one of the Baofeng walkies and use it and replace the older Kenwood’s we have at work. But I feel like that would be a no-no.

@twwtb 5 лет назад

For those of you who are having chronic problems getting your FT-60 (maybe any radio, I don't know) to work with Chirp: With the programming cable plugged into a USB port: Go into your computer's device manger and double click on the Prolific (or whatever device your programming cable has) device. Go to the Power Management tab and turn off "allow computer to turn off this device to save power..." This solved my problem and now I can consistently upload from Chirp to my FT-60. 73

@davecasler 5 лет назад

Thanks for the info.

@twwtb 5 лет назад

@@davecasler You are welcome. I hope it helps somebody..73

@b.u.g.a.j 7 месяцев назад

Hi Dave. The Settings in Chirp software is blank. In a Memories tab. I can see only to lines " LoVFO and UpVFO, and these frequency values dippend o n what is selected before reading. Pls help.

@deanlevang6031 2 года назад

I've been able to use Chirp to program a radio (UV-82HP) and all went fine, except for the FM Radio Preset under the Settings tab. The file saves it, but the radio doesn't seem to get the info. Any clue as to why?

@ajj7030 6 лет назад

Very impressed.. do you have videos to program the TYT 8000E? I’ve been trying to program it but having issues..

@drrogue 4 года назад

AJ J now Chirps supports the UV8000D/E

@joanieswick9176 5 лет назад

Hi dave I just got a baofeng uv 5r how can I program 33.98 into the radio

@sillentstone 2 года назад

I want your help I have it TYT MODEL TH-UV8000D I want to unlock all the frequencies what is the way to unlock THANKS

@rogerwallace1976 Год назад

As a member of the Church of Jesus christ of Latter-day Saints and an amature radio operator im Roger KK7KLD from mid utah. I must say I like your screensaver. Lol, here's a comment for your RU-vid algorithm.

@southfitness7567 3 года назад

Nice video sir

@furonwarrior 4 года назад

Once you save the img onto the radio, can you still use the radio with the original software?

@wesleybuff2536 4 года назад

It can only operate on one "codeplug" at a time. Saving a codeplug intended for your radio will enable you to upload it again later, provided you "save as new" before editing. In this manner you can have several different environments at your disposal within a few minutes of reuploading a different codeplug.

@mjcussen7458 6 лет назад

Hi Dave, Is there a variation on your last procedure if I want to upload the memory from my first Baofeng GT 5TP to a second Baofeng GT 5TP? Can I just upload to the second Baofeng?

@davecasler 6 лет назад

Yes

@kofimcgreen5427 6 лет назад

You're great Dave I really enjoyed the video. can I use the Boafeng UV-5 with just a GRMS licences? by just programming legal frequencies, and how do I lock out transmit on the illegal frequencies? Thanks. Kofi

@davecasler 6 лет назад

All I can counsel you on is ham radio. Why not go ahead and get your technician license?

@furonwarrior 4 года назад

Can you modify the FM to transmit on AM in chirp as well as extend the frequencies?

@wesleybuff2536 4 года назад

I am not aware of any way to do this

@DAVIDGREGORYKERR 6 лет назад

I would have thought that drivers only work in protected mode or he software is installed in administrator mode or if you have Microsoft Windows 10 from the bash terminal in the start menu you can do sudo apt-get install chirp install ret thrown in password and you should be able to run it from inside the bash terminal by ./chirpw ret

@JeffRigney 6 лет назад

Dave do you know where in chirp to put T-DSC and R-DSC values and if I need to change anything else to make my Baofeng transmit to a CP200D?

@davecasler 6 лет назад

Sorry, no.

@stuartapperley8960 5 лет назад

Hi Dave - I would appreciate it if you could let me know if you have a video showing how to add frequencies to a Baofeng UV-5R using Chirp 0r a tuitorial on how to do this.

@davecasler 5 лет назад

I do have a video on Chirp.

@grantar2 6 лет назад

Dave, hopefully a quick question. I have Chirp, I have Baofeng UV-5RA, I have the programing cable and have been able to move information back and forth to the radio. My issue is that Chirp will not allow me to populate ToneSql, DTCS Code, DTCS Pol, Cross Mode, Duplex, fields in chirp. I am not sure if the lack of data is the cause of my performance issue. (haven't been able to recieve anything). I see the fields populated in your example of chirp, I assume I should also be able to populate the data but I cant. I can get the drop down, select a value, but cant get the program to retain / save the data. Any ideas. Thanks Art.

@davecasler 6 лет назад

Are you using the right model radio in chirp? If you're just using a similar model, you may not be able to program everything. If you're still having trouble, chirp has some user forums that might be able to help

@drewwebster9271 4 года назад

So thanks for the video it really goes in depth. however my Wouxun KGUV9DPlus is not working with the software. Any thoughts on when this will be available?

@davecasler 4 года назад

You'll have to contact the folks at CHIRP.

@spieson 6 лет назад

Hi Dave...I want to ask you if chirp supports any midland radios..I searched their website but I could not find any midland model...thank you in advance!!!!

@davecasler 6 лет назад

If they don't list them, then CHIRP probably doesn't support them.

@markldonaldii 5 лет назад

Dave, HELP - I purchased some Baofengs for our family vehicles in case of emergencies but when I try to dial in the NOAA weather reporting the radios say "Cancel" as I dial in the last digit. I read on the internet that CHIRP can be used to reset the lower and upper frequency range for VHF and UHF that can't be done thru the radio key menu on the handhelds. We are trying to make sure we receive weather and emergency information on these radios. Could you do a video showing how to use CHIRP for changing the frequency ranges to receive these vital stations? Thanks

@davecasler 4 года назад

I think I covered that in some older videos. I'll keep this in mind as a potential topic.

@paulhastings3109 5 лет назад

on the Chinese import radios which one do you think would be the best of all of them. you played with most of them and then programming them with chirp and do I need the red cable since I have windows 10. And yes I know we're getting to the line of the Chinese in port may not be possible anymore Tnxs

@davecasler 5 лет назад

The red cable sold by PowerWerx works for Wouxun and Baofeng radios so far as I know.

@ronschreiber7764 3 года назад

Dave how do I find the name of the repeater ?

@mrmurtagh11 5 лет назад

Cheers mate, legend! :D

@enriqueramongonzalez5912 7 лет назад

How should I write my Baofeng uv6 with the RX and TX frequencies?.I need both ,such as RX159.025 and TX159.100. Help David Casler !

@davecasler 7 лет назад

You do this with the programming software. Note that the two frequencies you mention are not ham radio frequencies.

@davidsapadin 2 года назад

So I have myself a cable that works, I think, it was still in the plastic. WIN 10 recognizes it as Prolific USB-to-Serial Comm Port (Com 3). Then, following instructions, I Turned off the radio. Held Down the 3 key and turned on the radio. The number is BFB298. Chirp says I'm only good to 296. The radio is a weirdo. It is labeled UV-5R (Baofeng) but it is an 8 watt version. Not labeled anything else but UV-5R anywhere including under the battery which is a double-sized battery and adds height to the unit -- fitting nicely on the back AND underneath the radio which makes it taller than the usual UV-5R. I have a regular old UV-5R too and I think its possible this cable came with that one which I have had for 4-5 years. I've had this 8 watt version for at least a year, and since then BAOFENG has come out with several 8 watt H-T's but NONE of them numbered UV-5R. So I have this feeling I am stuck between a rock and a hard place until I figure out how to deal with being-off-by-3-numbers. I can't remember if its a firmware thing or driver number or what, I just followed Mr. M's page (Miklor.com) until I got to this "snag." Any info you can shed on this predicament greatly appreciated. Afraid to move forward until I understand why my BFB298 is three numbers too high and what that means. Thanks, 73 Dave N9DMS Naperville, IL

@NAMCAcontractors 3 года назад

What selection do I use to program the Uv-5r-ex

@NAMCAcontractors 3 года назад

Did you find what selection to use for the UV-5R-ex?

@voyfan99 7 лет назад

10:25 You don't need to download from the radio in order to upload a new image file. Though I guess if you want to show how to import over and delete a few select memories that's fine. -73 KC1HEE

@davecasler 7 лет назад

That is indeed true. However, I'd suggest downloading what's currently in the radio and storing it somewhere so you can revert if you don't like the new settings.

@georgemate2944 4 года назад

Hi Dave from UK, your Videos are first class , I have just got a WOUXUN KG-UV 9K and the RED Programme cable, I want to programme using Chirp but as yet this radio is not supported by Chirp but the KG-UV9D Plus is would it be ok to use Chirp as a UV9D for my UV9K , looking forward to your reply Thankyou

@davecasler 4 года назад

Not sure, but you could try.

@HugDeeznueces 5 лет назад

.where can I get that red cable? is it brand specific? have a couple of wouxun radios. Thanks Dave.

@davecasler 5 лет назад

Powerwerx.com

@greatpix 3 года назад

You ought to do something like the old Saturday morning TV show, Watch Mr. Wizard, where you have someone who is new the amateur radio and talk them through the process and maybe do tests and experiments. I bet you'd find areas where you think it's a logical step but would confuse someone new. Pros are a little blind to how a newbie thinks and that's why I think going the Mr. Wizard route would work great. Not that your video isn't already very good. I used to sell cameras and over time I found that I was talking over their heads so I made the effort to slow down and explain step by step what I was talking about and why a feature would benefit them or not..

@emmanueljoselauronilla644 5 лет назад

hey dave do uv-82 baofeng has the same steps in prog. using chirp ain't there any changes in the setting cause i tried doing your way it always respond "radio did not respond" what will i do??

@davecasler 5 лет назад

Your query would be better directed to the folks at chirp (chirp.danplanet.com)

@waldowoc 7 лет назад

Great video. Have you ever noticed any of your radios transmitting while communicating with the software? All my Baofengs do, and I have heard the tell-tale signs of others in my area programming their radios too. I recommend disconnecting the antenna before downloading or uploading.

@davecasler 7 лет назад

Disconnecting the antenna means an infinite SWR, which could be problematic. I'll look at mine and let you know.

@waldowoc 7 лет назад

Ah, I guess I should have suggested a dummy load or a Faraday cage. I was thinking more about the interference issue rather than SWR. Please let us all know what you find out.

@voyfan99 7 лет назад

Instructions state you should tune to an unused frequency when you're programming the radio.

@mikesamra9126 6 лет назад

This works on the IMAC and Macbooks as well, the Chirp software. The cable cost 6.00 on Ebay or Amazon.

@yessure5291 4 года назад

How do I find the cable? Is it universal for all radios? A link to amazon? thanks.

@KE6DOA 3 года назад

new at chirp.. but i made my list uploaded to radio (TWICE NOW) and cant figure out why its not saving to radio, after cloning is done.. i turn the yeasu FT-8900 off .. unplug radio from programing cable and turn radio back on.. and nothing got saved... what am i missing ??

@KE6DOA 3 года назад

sorry , stupid me.. it was still in VFO .. went to memory and all was there lol

@spieson 6 лет назад

Hello good sir..I want to ask you if I can set my midland ct-690 model with any of these chirp's programs...???

@davecasler 6 лет назад

If it's not listed on the CHIRP homepage, then probably not.

@dimartinis 4 года назад

Great video,My 2nd UV5RA gives ERROR : Radio refused to send second block 0x1f00 when trying to download from radio, any suggestions? No issue with cable or drivers since my 1st UV5RA is responding normally! web searching didn't help.. Thanks in Advance!

@davecasler 4 года назад

You might try doing a factory reset or else making sure the firmware is up to date.

@Gollammeister 6 лет назад

ive got chirp and im in uk would be great if we could import from uk frequency list unfortunately that doesnt appear to be the case

@davecasler 6 лет назад

Double check in chirp. There are quite a number of standard lists that you can import.

@Christodoulas 4 года назад

Hello, S=Dave. Thank you for the useful information. My name is Chris and I live in Drama Greece. I have a Baofeng UV9Rplus. There is a question I'd like to ask. Can you tell me please what am I doing wrong when the upload to radio button in Chirp is inactive, while I have data on my list to be uploaded? Thank you.

@davecasler 4 года назад

It sounds like a driver problem. If you can download you should be able to upload.

@Christodoulas 4 года назад

Thanks, dear David, for dealing with my problem. Let me be more specific. When I create my own list from scratch, I can upload it to the radio. I can't upload ready lists, if that helps you. I don't believe it's a driver problem.

@newfoundnugz5900 3 года назад

How come I can't get Radio Reference to work with chirp in Canada it asks for my zip code and in Canada we have postal codes.. Won't work

@scottw3129 5 лет назад

I'm having a issue with port forwarding. I keep getting a could not open port COM4: [Error 5] Access Denied. Any suggestions. I'm using chirp and also running. Driver 3.2.0.0 for the cable.

@davecasler 5 лет назад

If access is denied, it could mean it's already in use by some other process.

@josephlight3403 5 лет назад

I have a mac and I am having an issue at the download from radio portion. When I am trying to clone the radio its giving me a port error message. How can I fix this?

@davecasler 5 лет назад

Sorry, you'll have to ask a Mac expert. I can't even venture a guess.

@sairbashir9784 6 лет назад

HELLO DAVE, I AM HAVING MAJOR ISSUES WITH DOWNLOADING FROM MY GT-5TP RADIO USING THE CHIRP SOFTWARE, THE UV 82HP DISPLAYS A ERROR POP UP. STATING THAT THE RADIO IS NOT RESPONDING. CAN YOU HELP ME SOLVE THIS PROBLEM? MY APOLOGIES FOR THE CAPS.

@davecasler 6 лет назад

Try turning the radio's audio to about halfway up. Make sure the radio end of the cable is plugged all the way in.

@jeffvaughnmedia 2 года назад

So, I uploaded from CHIRP and now my Baofeng F8HP doesn't work. Not even the MENU key. Have you experienced that?

@johnanderson5806 6 лет назад

Read the website for Chirp. I have a Baofeng UV-3R Plus. Under the baofeng radios. I dont see the UV-3R Plus listed under Baofeng devices. Just want to confirm or if anyone can confirm or validate if CHIRP doess NOT work or talk to the baofeng UV-3R Plus? if that is the case. is there an application for programming the Baofeng UV-3R Plus. that works like CHIRP? Thanks!

@davecasler 6 лет назад

Hmm...the Baofeng website actually encourages people to use Chirp. Have you tried the UV-3R profile to see if it's compatible with the UV-3R+?

@hockeyfreak043 6 лет назад

Ok got it downloaded .now I am useing my baofeng for firefighter stuff ..car wrecks traffic control..but I would like to put some frequency's in .to Liston to..but not key up on ..while on a call..how do I do that.i put 22 frequency's in to talk on till I get my license..but just want to be able to talk an listen to dispatch..an police an stuff..can u do that.?

@davecasler 6 лет назад

Try putting in a transmit frequency that's right at the edge of a ham band, say 144.000. As I recall, each channel has to have a transmit frequency, even the ones you just listen to, like the wx radio.

@rdyjur 4 года назад

I'm programming a baofeng to work with garmins. I'm wondering how to set up privacy codes. I understand that you set this under the 'Tone' column. It looks slightly different in the Baofeng than Chirp. For Example on the Bao, you set RTCS and TTCS i believe to whatever privacy code you want. How do you perform this in chirp ? You put it in the tone column and then which tone mode do I set it to ?

@davecasler 4 года назад

This is a use outside of ham radio, so I can't comment with any certainty.

@rdyjur 4 года назад

@@davecasler alright thanks i got it with some trial and error. You enter your main freq, then select TSQL for tone mode column, then enter privacy code under ToneSql column.

@BBaldwin 2 года назад

I bought A laptop for the sole purpose of programming my Yaesu FT 65R. When I attempt to download the radio information on the laptop I get an error message “could not open port [error 3] the system cannot find the path specified”. Very disappointing and I have no idea why it’s happening.

@jake30966 6 лет назад

Hi Dave , every time i change the frequency in location 2 to match my Midland radios when i go to upload to radio its jumps back to the default frequency , how do i save the changes ? Thanks

@davecasler 6 лет назад

I'm not really sure. Try saving your file to the disk before you try to upload it back to the radio. That might help. Good luck summation point

@jake30966 6 лет назад

Hi Dave , thanks for quick reply , i got it to save i just had to hit the enter button on keyboard for it to save .

@andrewagner2035 3 года назад

I can’t get chirp to communicate with the radio. I have tried all com port numbers. COM1 …etc. Is there something I am missing? I see you using COM6.

@postingid3214 2 года назад

My new Baofeng UV-5R populated "COM4". That's what I used.

@Woorkbootz 3 года назад

I just bought two Luiton LT-458 and can't find any help on how to program these. I have ZERO experience, this is my first radio set. I managed to download CHIRPS on my MacBook (which was challenging enough) but I don't know where to go from here. Any help?

@davecasler 3 года назад

I'm not familiar with those radios. Chirp's website has instructions, but it assumes you know what all the values are all about. Your Tech license manual can help explain them.

@emmanuelquiroz7932 5 лет назад

what is the best setting would you have for a baofeng radio

@davecasler 5 лет назад

For the non-memory settings, probably you're okay going with the defaults.

@davidmarberry5565 4 года назад

anybody know why when i download chirp it wont open ? just keeps going to install again ? thanks

@rogerstowe4572 6 лет назад

Where do you get the original info for channels in your area if you don't have a radio with it already in it tocopy

@davecasler 6 лет назад

Check the ARRL Repeater Directory ($$) or just Google for repeaters in your area. Be aware that lots of repeaters are there only on paper. Plug the frequencies into your radio, then let it scan. The active repeaters will show themselves pretty quickly.