UTG Accu-sync QR Mount - More Goodness 

Good review. I think it's worth mentioning that Leapers (the parent company) has a branch of made in USA products, under the UTG Pro name, if that's the deciding criteria. Aside from that they offer a lifetime guarantee on their stuff, and do offer a nice veteran discount. Most gun parts suffer from expensive price tags due to needless marketing wank. If the product meets the minimum requirements for its intended role then price and brand name are stupid criteria for dictating selection.

One of the increasingly rare channels on RU-vid were a creator follows up on requested review from their audience. Thank your sir!

Great review. I think the QD levers facing each other is a clever way of reducing snag points.

The most productive comment section on RU-vid, I swear 😂

The play in the levers would drive me nuts but looks like a solid mount overall! UTG has really stepped up their game over the last few years

This is awesome. Nutnfancy talked about these being an amazing option

I always enjoy your reviews. Thanks for taking the time to do this one.

Thank you for finding products that are budget friendly and still work well.

I have two of these mounts and I love them. I replaced ADM and MI mounts with these for the weight savings. Thanks for the great review as always.

My biggest concern is durability. Not just on this one, but all cantilever mounts. I know it's not your thing C-does, but I'd like to see all mounts endure torture testing. I'm mainly worried about bending of the front extension. If the optic survives a fall, but the mount bends, that's no bueno. 6061 is bubblegum soft, and yet there are $500 mounts made out of it. 7075 is stronger than SOME steels and "near as makes no difference" has the same cost and machining time. If the Swampfox freedom mount got rid of those damn scope ring tapes from the 1990s it might stand a chance of being the best. Aside from Swampfox, 7075 starts at $300, on a good day. Why the hell the industry hasn't gone to making everything out of 7075, I'll never know. The stuff I make doesn't need that kind of structural integrity, but I still use 7075 for everything. Anyway, if anyone can point me towards some good torture testing videos for mounts, I'd appreciate it.

60€ non clamp and 100€ clamped in the eurozone - used it with a Strike Eagle on XCR-L for almost 3 years. Has more recoilstuds than most other in the market and kept Zero on .308 Savage MSR 10. In the meantime I was converted by Hakan Spuhr and Eratac/Recknagel … those are by no means superior …

I have a couple of these and they’ve been working great for me. One for a scope I use when testing accuracy of my loads and goes on/off often. Holds zero.

I have one of these on my SPR along with an RMR mount and I have to say... Usually when you get something made of Chinesum, Picatinny usually means weaver... Leapers actually makes these to Picatinny spec, on my Aero Precision M4E1 upper, there was nearly ZERO slop in the mount/rail interface. The RMR mount is solid also, I used it to mount a Holosun 508t as my backup optic. Great for the price.

I have 3 of those, man I can't complain at all. those mount are the best for the money.

The new QD Mounts/Rings have been pretty decent. Nice to see a video on them.

QD, QR, WQD... it only needs "4K OLED"

I wish UTG would make something like these in a 1.93” ring height to accommodate my massive head behind the optic.

I'm a fan of their slim fit back up iron sights n use them on all 4 of my AR's. I will probably be looking into this mount!

I’m not too embarrassed to admit that I’ve tried UTG mounts a few times and they seem…fine. Now I get to try the QD version.

It's great to see some more budget mounts getting such good reviews from multiple sources. On a different topic, any chance you'll review the new Swamp Fox Tomahawk II with the Fiber dot? I'm wondering how it compares to the PA Nova and PST II and you have the best optic reviews on YT.

Hi there, great review! I do want the review of the UTG LPVO 1-8x28 mrc

Thats certainly a good looking mount. I've tried a UTG mount before with good results. I dont recall the model. It was their 30 mm offset Q.D. mount. I found it to be well made and finished. I liked the design but the one issue was the base was just 6-8 mm/ 5/16" too long to allow room for my BUIS. It adjusted and mounted easily and locked securely. I really liked the locking lever operation. Not as beefy as I'd like but they locked and unlocked easily with 1 hand. Repeatability was good, not 100% but always returned to within 1" at 100 meters. My main misgivings about the inexpensive Chinesium mounts is that they're made from suspect materials. Idk if its cast aluminum or just some certain alloy that is just lighter than typical US produced but somehow these mounts are noticeably lighter than their high end US made counterparts. The hardware also tends to be smaller and somewhat suspect as well. All in all though, I gotta say the things work and work well. Would I carry it into battle? Probably not if I had a choice but for anything short of that I think they're a viable alternative for anyone on a budget. They work. Now, given my preference, I'll take my go-to Q.D. mounts which are the American Defense Manufacturing recon Q.D. mounts. I now have 5 of them in both 30 mm and 34 mm models. They typically run about $155 to $185 or so which is considerably less than LaRue, Bo Bro, G,G&G, and others. The ADM recon is a hoss of a mount. Big and beefy all around including the hardware. And you can be assured it's all high grade and properly hardened. The recon is skeletonized and milled out where possible but nevertheless it's a bit heavier than many due to its heavy duty 3 piece vertically split ring design and extremely strong base and clamp design. I use the 2-clamp models but ADM does offer single clamp models as well. As beefy as they are the single clamp models would be more than adequate and substantially lighter however I prefer the extra stability and redundancy of the double locker. The locking clamp design is my only complaint with the recon. They adjust easily and clamp securely with minimal effort but unlocking can be difficult when properly adjusted for maximum clamping. I find it takes 2 hands to easily accomplish, 1 to depress the locking lever and the other to lift the clamping lever. I have 3 older models that operate as described and 2 newer redesigned models that are a bit easier to unclamp. Performance wise these mounts are unbeatable. The ring design accommodates any misalignments or manufacturing imperfections with the scope body, holds securely and mounts quickly and easily. I've found repeatability among all 5 of my mounts to be 100% or so close to it I cant notice the difference. Return to zero is always within the normal accuracy range of the rifle and ammo I'm using at the time so I'd call that 100%. You do have to exercise care when mounting for perfect RTZ. Just always use the same technique. Mount into the same Picatinny slot, apply forward and laterall pressure towards clamps and clamp the rear clamp first, then the front and wango-tango, ready to bango! She'll return to within 3-5 mm/ 3/16" of previous zero if not closer, every time. All in all these are my preferred mounts. Rock solid operation and 100% repeatability coupled with to hell and back reliability and durability for considerably less than most makes the ADM recon the only one I need. If you can swing the price of admission I HIGHLY recommend the ADM recon. However, if you're on a tight budget and just cant part with almost 2 large, the UTG Q.D. mounts are a viable option imo.

I enjoy your reviews, can you add one thing to them? Maybe use the wheeler delta scope mounting kit to see if the rings are aligned or if they shift when clamped down. That way we can see if the mount will put stress on the scope when mounted.

Awesome mount. Once I figured out how to tighten it lol. The QR threw me off. lol

Maybe the levers tighten towards each other to spread apart the distance of the clamps, which is a good thing.

Cool,thank you!!

1 rifle . Day scope / night scope . Works like a charm on my 6.5 prc .

I could be wrong, but it looks like the kick release levers face each other like that to reduce snag points. I have quick detach mounts that have both levers pointing at the same direction and they snag a lot!

Should I send you my EO tech 34mm QD mount or do you have one in the works already?? I can’t complain about it but it has only one latch and only one pic slot and that made me too nervous to keep a 2000$ piece of glass in it

The truth is I'm constantly flummoxed and mystified regarding mounts and their prices. I buy expensive ones AND I HAVE NO IDEA WHY. I just assume they're of better quality, but I have no metrics to determine quality (except perhaps running a lapping bar through the rings -- but there's also a wide price range among lapping bars!!!). I come away (quite convincingly) feeling I've been made a fool of.

I would buy this mount but aesthetically it looks like something HR Giger designed. I also wish they had a piggyback RMR ring half.

Would you be willing to review the UTG Magnifier?

Ok you engaged nerd/dork mode here. What type of model trains... oddly I find model trains and guns to be my two favorite hobbies for the fact of details, variables, specs..

Is there Helicoil inserts inside the mount for the ring portion? Or am I just screwing into 6061 Alum?

Got the 1.3 hight one without the QD on my PTR and it’s done great. Can take a beating and honestly it’s held 0 better then my ADM mount

I missed you, boo. 😘

My problem has been trying to find a 1.60-1.70 mount that isn't 300+. Probably just going to go with the Badger C1 for the versatility.

The shadows on either side behind you when seated at the table look like shadowy angel wings. Interesting unintended effect.

They need to make these with more options for the height - some people like 1.93 - I think that’s too high - I like more like 1.6…but still, they’d probably sell more if they had more options. Also, call me crazy, but I bet a simple “thumb nut” version (like the Weaver thumb nut mounts) would fly off the shelves if they could sell them for like $50.

Dammit, secrets out! If been running these for awhile now. I just get them cerakoted but these mounts work really well and hold zero.

like them shirts

Lighter stronger prettier and more repeatable than Warne's X-Skel QD(in my experience) at half the price. I have a few of these and love them. If only they made them in a 20moa incline. Sure there are better mounts, but not even close in price.

Put some egg shell foam on the walls and ceiling 🤙

6oz QD mounts are extremely light!! The lightest mount I was able to find was the Swampfox Freedom at 5.5oz. - so half an oz more for QD? Pretty great. Fit n finish is also very nice.

Lapping?

Is UTG out of the "airsoft" tier generally, or just their mounts?

Im all about saving money and dont care about made in china, but I gotta say the tolerences and qc isnt there. The sprocket retaining screw for the quick release was misaligned letting the sprocket free spin

C_Does looks like Derek from More Plates More Dates if he didn't abuse pro hormones.

The non QD was my first mount. Never failed, still have it. Just don't use it because I feel bad about putting a cheaper chinese part on my nicer guns.. lol. Wouldn't mind using it if it were my only option though.

🤷🏼‍♂️ we naive and 🥺 are we 🤷🏼‍♂️

Oh dang face reveal

LaRue is NOT 🤢 good mount. The camming mechanism will gouge underneath side of rail and progressively become looser every time you dismount and remount and if you adjust cam to be tighter it will then again gouge even deeper. For nice upper that's monolithic this kind of mount is absolutely garbage and unacceptable. it's like installing new rim that will progressively damage your new car. retarded design. newer bobro mount with Integrated recoil lug or adm is way to go.