V8 Swap Toyota FIRST START!!! - 1UZ 1989 Pickup

Подписаться 48 тыс.

Просмотров 29 тыс.

50% 1

FINALLY the 1UZ V8 Swap is running in my 1989 Toyota Pickup! This episdoe we put another 1UZ in the truck, swap harness's a couple times, and then wire it up! Ending in glory, she roars to life.
Support Dirt Garage by purchasing our Merch! - www.dirtgarage.ca
Brought to you by @ Overland Outfitters - overlandoutfit...
INSTAGRAM - / dirt_garage
Get 10% OFF Afraid Knot Ropes with my discount code "dirtgarage"
www.afraidknotr...
My 2020 OFFROAD Gear Kit / Recommendations: USA Affiliate Links
Lunchbox Locker: amzn.to/34lDTfI
Smittybilt Compressor: amzn.to/2vhwEqm
Tire Deflator Tool: amzn.to/2SwmbPO
Smittybilt Winch: amzn.to/2HbKP2Y
Recovery Rope: amzn.to/39om3Ze
Soft Shackle: amzn.to/3bnRg0t
Hard Shackle: amzn.to/39ouyDA
Recovery Hitch: hamzn.to/2SeE6LN
CANADIAN Amazon Affiliate Links:
Smittybilt Compressor: amzn.to/35DcvY3
Tire Deflator Tool: amzn.to/2QBWPQA
Smittybilt Winch: amzn.to/35CBOJO
Recovery Rope: amzn.to/2s9qRlj
Soft Shackle: amzn.to/2R4j5Bx
Hard Shackle: amzn.to/39QXpl3
Recovery Hitch: amzn.to/306WyIL
Music Licensed @ Artlist
Find music for your videos on Artlist! artlist.io/Cli...
My 1989 Toyota Pickup Build: • My DREAM Toyota Build!...
5VZ-FE 3.4 Swapped
Manual Swap
Dual Transfer Cases
TRD Supercharger
Solid Axle Swap / SAS
OME Rear Springs & Tundra shackles
37x12.5r17 Toyo MT Tires
Build Playlist Here: • V8 Swap Toyota Pickup ...
Camera Gear Used To Make This Video:
Camera: amzn.to/36C4dkI
Microphone: amzn.to/2QDkIaB
Tripod: amzn.to/2sdCkR0
Gimble: amzn.to/2FyndVf
Business contact: Dirt.Garage@outlook.com

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 155

@TheStoryTillNow 3 года назад

Soooooo happy this thing runs 😂

@DirtGarage 3 года назад

Me too!

@definitelynotpewdiepie 3 года назад

Dude, this truck is gonna be an absolute BEAST. Props to you for your persistence on this project. A lot of guys would have quit, but you've stayed on it and made a ton of progress. I hope the next video is you doing burnouts and doughnuts!

@gyffjogofl7676 3 года назад

Its all the little stuff that keeps people from completing a swap. Glad you show it.

@DirtGarage 3 года назад

Huge list of little stuff, especially with the fire resto part. Nice part is everything on the truck side is going smoothly, just the engines I had trouble with...

@philgriswold2133 3 года назад

I'm old enough to remember the big problems were motor mounts, bell housing and making the headers fit. All of these wiring harnesses are an entire different science. Great job. It should be a beast on the street and trails.

@franksbigday5468 3 года назад

The look on your face when it ran for the first time. I smiled so big. I know that feeling. It's a good feeling.

@DirtGarage 3 года назад

Man, was I ever happy. Still smiling!

@seancheetham7454 2 года назад

You have the patience of a saint. Would be great to have a final video that shows all the things you learned and what you would do differently if you were starting this again.

@UnwindingRoads 3 года назад

Music to our ears! Awesome Clint!

@DirtGarage 3 года назад

Thanks!

@TavaresAndres4x4 3 года назад

Nice swap bro, kind regards from Brazil!

@kyledurrett8134 3 года назад

Righteous Dude, the beast is alive and sounds awesome! Sound tracks on point as usual too 🔥🔥🔥

@DirtGarage 3 года назад

Glad you like it!

@peterwatson8295 3 года назад

Hell yeah congrats! Your never give up attitude is very inspiring. I'm about to go try to get my 22r to 22re swap to run so this video was great motivation!!

@simonpope1780 3 года назад

Hell yeah it’s a good day dirt garage is back

@carlosarroyo5262 3 года назад

Epic. Love the fact that it's all Yoda.

@DirtGarage 3 года назад

Thanks! Me too!

@matthieucorbeilwalsh 3 года назад

So glad to finally see things going your way with this swap. I've been having issues too on my '90 4Runner lately but it will get back on its wheels. “It is the time you have wasted for your truck that makes your truck so important.” Saint-Exupéry would say

@DirtGarage 3 года назад

Thank you! I don't see it as wasted time. I do like working on it, just a little less than I have been over the past 5 months would be nice!

@philrab 3 года назад

Your commitment to seeing through a project is inspirational my man.

@bentenxl 3 года назад

love this, you have quality! hope your channel blows up

@DirtGarage 3 года назад

Thank you so much!!

@NuttyNu 3 года назад

Please make a overview review of the swap once you’re finish.

@jakeofallterrains9048 3 года назад

It really does look at home inside that engine bay.

@bob_frazier 3 года назад

What could have been a 5 part video series Clinton knocks out in 1 short vid. Super happy you had some success!

@Rogueflier 3 года назад

I cried a little.... Great vid, Dope soundtrack. Appreciate y’all👊

@DirtGarage 3 года назад

Thank you! I nearly did too, so much work, finally paying off.

@heavyprogressive76 3 года назад

WHOOOO!! right on buddy what trip! Way to keep on er I love your persistence my friend!

@DirtGarage 3 года назад

Thanks! Will do!

@jvogler_art4708 3 года назад

I wish there was more footage of it actually driving.

@TheGreatPursuit 3 года назад

Man that is just awesome I am really happy for you Clint!

@willisgoodger1875 3 года назад

Hot dam! Fire in the hole! Sounds awesome! So glad you got her running. You got me anxious like back in my younger days.

@DirtGarage 3 года назад

Woo, yeah I'm so happy to have it running again.

@mokreepinjeepin8100 3 года назад

NICE!! Engine bay looking NEW! Wiring wud turn my brain to mush.. 😆 Congrats on getting wrapped up Clint, miss that off-road content hope it screams.

@DirtGarage 3 года назад

Yeah it's soo nice and new! lot of work! My brain has been mush for months straight over all this, wiring is actually the easy part for me.

@kimofarias7773 3 года назад

Love how the truck shifts a little when you rev it. Great content keep it up👍🏾

@DirtGarage 3 года назад

Yeah, this actually surprised me a bit!

@FlawedOffroad 3 года назад

I admire the persistance, as Im stuck in the awful stage in my build where im overwhelmed with the little crap that keeps turning into big crap. get er done!

@DirtGarage 3 года назад

I know the feeling. My list of stuff to do was HUGE after the fire.

@glenhayhoe 3 года назад

Great Choice of music... I thought this truck was toast (pun intended) after the fire.

@wetcoastwheelin 3 года назад

Congratulations on getting the motor running

@lilrip7532 3 года назад

Ballenger Motorsports has wire harness plugs & pins. Great prices , fast shipping and located in Virginia.

@southernmudder2 3 года назад

So glad you got it all figured out

@DirtGarage 3 года назад

Me too!

@camwoodsend2097 3 года назад

Way to stick with it. You’ve overcome some huge obstacles!

@DirtGarage 3 года назад

Thank you! Some pretty good obstacles, that is for sure!

@mountainjeepmike4408 3 года назад

So good to hear it running man!!!

@RM_Garage 3 года назад

Can't wait to see this thing on the trail. Awesome job buddy!

@DirtGarage 3 года назад

Thanks 👍

@longobardir 3 года назад

Love it! Makes me lean more toward the 1uz for my 1990 4runner. Local wrecking yard has a 5vz-fe, 1uz, 2uz, and a 2jz. I was leaning towards the 2jz but after hearing that v8 roar I might reconsider. Congrats!

@DirtGarage 3 года назад

I recommend 5VZ, very easy straight forward! East with minimal experience!

@longobardir 3 года назад

@@DirtGarage oh, I'm a mad scientist tho. My 2007 Sv650 is a Frankenstein, Removed the fuel injection and swapped in carbs. Had to make a custom half and half harness. I was mostly leaning towards the 2iz since im tired of the complexity of the v6 over the inline. (Buried knock sensors, no access to things like starter, etc.)

@michaelcook184 3 года назад

Good job way to hang in there on this project

@levsheppard2859 3 года назад

it lives!

@pocoapocooffroad 3 года назад

7:38 try feeding 12v with a switch to the main relays and you should be good. Race car style

@timeforbigchange9417 Год назад

Plus you lowered the center of Gravity when lowering the engine.

@BruceCookfmx 3 года назад

Yeah buddy!

@dieselmack2548 3 года назад

No fire extinguisher in camera view, no friend on standby watching engine, first start inside your shop. So much for living and learning. 😂 some people going to call this a troll.

@DirtGarage 3 года назад

Just because it's not visible on camera does not mean it's not there. And 100% learned. Fuel system was pressurized before I even tried starting it. And checked a hundred times for leaks in fuel system.

@j-tag4913 3 года назад

So much hard work hopefully not bankrupting you to do this.

@sprk11 3 года назад

looks good, and sounds awesome. Can't wait to see out in the trails.

@DirtGarage 3 года назад

You and me both!

@nemesis851_ 3 года назад

Before i see the whole video, I think there will be no less than 3 people with Fire-Extingishers on hand, at key turn crank

@DirtGarage 3 года назад

Nope just me. Being very careful looking for fuel leaks after every step. Not shows on camera haha. But I pressurized the fuel system before hand looking.

@HomebrewSubaru 3 года назад

That's a pretty cool project. Just found your channel. I'm in BC as well

@philfoote829 3 года назад

Had to watch it again so good

@cmac956 3 года назад

Hay ,good job , a lot of work .you did well. have fun with it.

@DirtGarage 3 года назад

Thank you, I will

@wernerboeinck9467 3 года назад

Congrats and better luck this time!!!

@shervang1700 3 года назад

Awesome !!! That yota gonna be a beast !!!

@DirtGarage 3 года назад

Absolutely!

@toninodemitri3345 3 года назад

Congrats man! Persistence pays off keep em coming🤘🏼

@DirtGarage 3 года назад

Sure does!

@mikediamond257 3 года назад

Note to self........ NEVER do a v8 swap in mine 😂

@MattSanipass81 3 года назад

Coming along great now bud… Happy for yah…

@DirtGarage 3 года назад

Thanks 👍

@caveman9275 Год назад

Always amazing 🤙

@kingofthe6spd 3 года назад

you need a de-pin tool. could have been much easier on you! but congrats on the running truck!

@DirtGarage 3 года назад

Yeah it would make life alot easier!

@frankstall1347 3 года назад

Sounds Sweet !

@DirtGarage 3 года назад

Right?

@frankstall1347 3 года назад

@@DirtGarage I want a 1UZ to put into one of my 2nd Gen 4runners with the 5 speed.

@triedandtrue1820 3 года назад

Is there a engine vin code that has difference from LS to SC identified? JDM usually sell as a LS/SC 400 , cheers good job.

@jasonh4167 3 года назад

Awesome man..! Bet your feeling good😊.

@DirtGarage 3 года назад

Very!

@stevew9247 3 года назад

The harness on those engine is really snaked in and out of everything

@DirtGarage 3 года назад

They really do!

@bowababowaba7471 3 года назад

So sick!!

@jason.k30chevy31 3 года назад

Congrats! Awesome man!

@DirtGarage 3 года назад

Thanks!!

@jmudd5449 3 года назад

Did you use the SC oil pan?

@DirtGarage 3 года назад

Yes, I did swap the pans over.

@jacobhendrickson8935 3 года назад

Wow do you work a full time job while doing all of this?? When do you sleep if so? Lol back in the day I had that kind of energy but it’s long gone now. I’ve been to lazy to do a tune up on mine. Oh and adjust valves and change valve cover gasket as well. I love my 22RE.

@lucasgiannetti8748 3 года назад

amazing work man!

@DirtGarage 3 года назад

Thanks a lot!

@deadjoey77 3 года назад

fuck yeah. I have a 1uz and an 85 pickup in my driveway right now. about to send my harness in to have work done, dropping engine in while i wait. then ill need to buy driveshafts, flywheel, clutch, bellhousing. plop that with the trans, hook the wires up and hope it works. what hickups did you run into? i know our platforms are slightly different but any info would be awesome!

@DirtGarage 3 года назад

Pretty much everything worked out great. My bellhousing and clutch kit from KSRacing bolted up perfectly! And clutch seems to work great. I ended up using 2UZ headers, they are tighter than the 1UZ ones.

@judgordo 2 года назад

Hi great job, I am from Mexico have a question waht type of ECU used i made the same swap in my tacoma but only running after 10 seconds shut of can you help ?

@judgordo 3 года назад

Nice job, what type transmission use?

@IamEmmett 3 года назад

sounds mean!

@coop_69 3 года назад

I really need help with my 3vze rebuild it started and ran so I put on the radiator fan and shroud and the little stuff but when I tried to start it then it just cranked I don't think it's getting spark but I have no clue and it's been sitting for way too long

@austinsears2299 3 года назад

Not trying to call you out but didn’t you say no more first starts in the shop? 😂

@DirtGarage 3 года назад

I was very very carful. Checked for fuel leaks about 100 times!

@greganderson2874 Год назад

Does the 93 pick up bell housing match to any American mfg ?

@stew2049 3 года назад

Dude this is so awesome. Gearing up to do a 1uz swap in my 92 pickup right now. So pumped. Just curious what ballpark budget you were looking at to get adapter plates mounts and wiring completed on your swap ?

@DirtGarage 3 года назад

A lot! Lots of little stuff that adds up. Probably $3000-$4000ish at end of day. CAD

@nemesis851_ 3 года назад

I shudder, with feelings of Deja-Vu (wiring)

@cnc75adventures49 3 года назад

Yeah👍👍

@86er01 3 года назад

good job ,,,,,,

@joshlosesweight6140 Год назад

Did you need an adapter plate for the transmission

@DirtGarage Год назад

Just had to get a 1UZ to R150 bellhousing

@Thexkidd 3 года назад

Woohoo 🙌. Sounds great.

@DirtGarage 3 года назад

It does!

@homegrowncustomsandautorep9737 3 года назад

Sweet!

@daviddaniels6645 3 года назад

Love it!

@BassSniper209 3 года назад

do you think you csn collaborate with fabrat

@DirtGarage 3 года назад

That would be sweet!

@nemesis851_ 3 года назад

WHoooooooop - - - Whoooop !!!!

@slightlypermafried 3 года назад

Are you still running a manual gear box, if so what did you do to fit the bell housing? I have a donor sc400 and a 89 pickup staying 2wd

@patrickfields3392 3 года назад

He said he bought a bell housing adapter to his transmission, I believe they sell a uz to w55 series trans

@patrickfields3392 3 года назад

An adapter that is

@slightlypermafried 3 года назад

@@patrickfields3392 I think he started with a 5vz and r151 trans and stayed with that. I’m scared to try my stock w56, it’s not made for much

@jacobhendrickson8935 3 года назад

Wouldn’t you want the engine to sit as low as possible anyway??

@noneyabizz8056 3 года назад

nice no fire!

@DirtGarage 3 года назад

Oh yeah!

@projekt6_official 3 года назад

Woohoo!

@Red_Beard_Builds 3 года назад

So bad assss!

@doughboy1966 3 года назад

Did you have to do a body lift?

@DirtGarage 3 года назад

Yeah 2"

@emacdaqt350 3 года назад

Wow

@fortunesk89 3 года назад

I need one in my Toyota dolphin! This is hooked to a manual transmission right?

@DirtGarage 3 года назад

Yup! R150

@goatsgarage2252 3 года назад

How hard is it to wire in a carb toyota?

@gunnerwagoner255 3 года назад

I’m sorry I see now you ditched the 2uz for some reason

@DirtGarage 3 года назад

Did you miss the while fire thing?

@bob_frazier 3 года назад

Computer issues? Make a 22r sound better all the time.

@zekealvarez4108 3 года назад

what trans did you use for this swap?

@DirtGarage 3 года назад

R150

@goatsgarage2252 3 года назад

I got a 93 lexus wid 4.0 for free ...its debadged..how do I kno wat motor I have if it's an interference engine or not ?

@DirtGarage 3 года назад

93 is non interference. They switched in 95

@goatsgarage2252 3 года назад

@@DirtGarage awesome thank u so much love the channel love the swap u inspire me !!! Thank you!!!

@gunnerwagoner255 3 года назад

I’m sorry but why are you calling it a 1uz now ??

@DirtGarage 3 года назад

Because it is a 1UZ. The 2UZ caught on fire and burnt up the truck. The 1UZ was its replacement.

@vzt5789 2 года назад

What transmission is running??

@DirtGarage 2 года назад

R150

@vzt5789 2 года назад

@@DirtGarage any other transmission can do? Cuz my area don’t have R150

@dronetrucker 3 года назад

I want to 1uz my fj60

@DirtGarage 3 года назад

That would be rad, those need more power!

@Taylor-gm8je 3 года назад

Hi! i'm looking into doing this swap on a first gen 4runner could you show us some insight on the wiring part of things and show us what you needed to do to get it to run?

@DirtGarage 3 года назад

Once I get it all buttoned up I will!