4.7 Tundra V8 Swap into a 2005 Tacoma Manual Trans

Подписаться 79 тыс.

Просмотров 102 тыс.

0% 0

Check on Himiway's New Launch and win free e-bikes: bit.ly/HimiwayLaunchPage
Affiliate Link:himiwaybike.com/BigTireGarage
Discount Code:BTG50($50 off)
Get Your Stickers Here
bigtiregarage.myshopify.com/
This week I have the Yota back in the shop to get all the items I need together to finish up the Toyota Tacoma 4.7 V8 swap, before prepping the shop for another week of shooting for FourWheeler and getting the shop ready and the vehicles prepped....plus i have a "new" vehicle that I have to prep that is very special....a new Fat Tire E Bike.
Find Dave at @thedirtheadshed
find Fred at @4xFredWilliams
Coffee Cups Here
big-tire-garage.creator-sprin...
Best Wheel Base for Off Road Rig
• Best Wheel Base for Of...
What Happened to the Suzuki Samurai
• What Happened to the S...
My Favorite Builders
• What happened to the 6...
Learning CNC Plasma
• Learning CNC Plasma, W...
Where to get the goods:
Welders: esab.com/us/nam_en/
Plasma Table: www.fastcutcnc.com/
Fab Files: www.diyoffroad.com/
#fabrication #offroad #vlog
For merch visit www.bigtiregarage.com
Follow me on social
IG: / ianfrombigtiregarage
FB: / iansbigtiregarage
App: www.digitalLUG.TV
DISCLAIMER: Due to factors out of the control of the Big Tire Garage, we cannot guarantee against improper use or unauthorized modifications of this information. Big Tire Garage assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Big Tire Garage recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Big Tire Garage.

Авто/Мото

Опубликовано:

20 мар 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 251

@BigTireGarage Год назад

If you want an E-Bike of your own make sure to use the discount code Affiliate Link:himiwaybike.com/BigTireGarage Discount Code:BTG50($50 off)

@johnlee8231 Год назад

Living the dream. Cramming a big motor into a small truck

@mikes.9755 Год назад

While you have the engine out of the Tacoma you should pull the bolts that hold the steering rack in and run them up from the bottom. It will make a future rack swap way easier.

@BigTireGarage Год назад

Thanks for the tip...will do

@donniehunter309 Год назад

I absolutely love that truck. Looking forward to seeing the completed swap.

@BigTireGarage Год назад

You and me both!

@JLeeChron Год назад

@@BigTireGarage so get to it. We need to see this thing moving by end of week!😂

@the_co_yeti Год назад

I remember Toyota had a 4.7 taco at a SEMA show back before the second gen release I think so when you say “it’s almost like it’s meant to be” is probably because it was. Sucks they never did the production model of it. They put it in the 4th gen 4Runners which were awesome to drive.

@AlDelosReyes-oi9qz Год назад

No need for a rear sump pan for this swap. Pretty sure the 4th Gen 4Runner oil pan will bolt right up like factory and will clear all your components since that tacoma and the 4th Gen 4Runner share the same design for front suspension/frame. It literally should just drop right in.

@toyotaguy1984 Год назад

Came here to say that. Along with a lot of other parts.

@mpolley07 Год назад

GX470 should work too since they are built on essentially the same chassis as the 4runner

@BigTireGarage Год назад

I looked at one of those of Ebay...was worried that it wouldn't fit with this combo...but good to hear it would...honestly same price as the rear sump

@justinharvey6192 Год назад

I agree it should be a simple swap as it’s the same frame as the 4th Gen 4Runner

@paulblack1811 Год назад

In my Camry when I did the 5speed swap I was able to just wire three resistors into the auto harness to ground, one for each shift solenoid, it cost about 5 bucks for all of them, and kept the car out of limp mode

@baldeaglegarage Год назад

Sweet swap! Really cool its going together so well

@nyernga Год назад

I was wondering where you went Ian. Missed your shows with Jesse back in the day. Although I'm more of a car guy than a truck guy, anybody who can fabricate something to make a square peg fit in a round hole is just what I like....

@stevec5657 Год назад

Great project, those 4.7's are great motors. I too bought an E-mountain bike, but also got a spare battery and a factory lockable mount, then installed that on the rear rack (not wired). Doubles my riding range.

@jeremymonroe2039 Год назад

Just finishing a 2UZ/auto swap on my Yota buggy ..after driving it a few times wow its alot more fun than the 22r..pulled it from a Lx470 and had the lexus v8 guys in Florida do a standalone harness..enjoy your videos with good info!

@cl37323 Год назад

Hopefully before you install engine, you pull the intake and replace the starter. Trust me, it’s easier with engine out of truck than it will be with it installed…. Great build, can’t wait to see it finished.

@BigTireGarage Год назад

Planning on it

@connorm1600 Год назад

@@BigTireGarage You don't necessarily need to replace the starter just rebuild the OEM one with new contacts.

@joelchils Год назад

Pretty sure... thats what every taco needs!!

@kbgarage4762 Год назад

I used to have the same exact model truck only 2wd. 05 Single cab, 2.7L, 5-speed with a lift on 33s, regeared with an LSD, It was a ton of fun to drive. I loved that truck and I never should have sold it. Its going to be insane with the 4.7. Subscribed!

@myrrhavm Год назад

Back in the 80s. Mini truck club days. I remember guys dropping in Chevy 350s rather easily into Toyotas. I never did. My 4 banger with a 5 speed manual use to boogy on down. My 59 year old brain keeps thinking I’d like to get into this Outback simpler overlanding fun. Seems the mini truck craze is still going strong.

@keefespencer1173 Год назад

The mini truck days were really big in the 90s as well and I know this because if I wasn't at the drag strip drag racing with family and friends I was looking for a car show to go to and I was a hang around for a low rider car club and my cousin and her husband had an early 90s S10 that he put a solid fiberglass camper shell on the bed and made his S10 truck basically into a Blazer because he added a second row bench seat to hold 3 more passengers in the back and behind that he had a wall with 6 12in subwoofers and a bunch of mids and highs everywhere but I'm his car club they had over 30 members and probably around half of the vehicles involved in the car club were either mini trucks or full size trucks and the rest were cars ranging from Honda's to old school Ford Thunderbird I remember which was one of my favorites in the club just because it was old school

@myrrhavm Год назад

@@keefespencer1173 The club I was in was all minis “SoCal Minis”. Most of our runs were with other mini clubs. The only other clubs that come to mind is SunSet Minis and Bonzai Minis. Once in a while we’d have meets with van clubs. The only names I can remember are Night Lights and Bon Ton vans. Good times. Volleyball, softball and football between clubs.

@brettoberry3586 Год назад

Love it! Can't wait to see it completed!

@kevincharles1983 Год назад

Got a 4.7 in my 1st gen sequoia. Love that engine

@chrismarinock520 Год назад

V8 manual taco. Hell ya!

@Mikey_556 Год назад

Always loved the 4x4 show. I had a 22RE 88 xtra cab that i miss and then a 97’ reg cab taco, they both could climb walls

@chrisstaats9398 Год назад

This is awesome! Can’t wait to this done

@jacobthornock317 Год назад

You can hear the excitement of it fitting together.

@jgranger2002 Год назад

Good to see an update on this.

@benruthlessburger8905 Год назад

Need that 4.7 in my third gen Tacoma

@jasonblanchard8943 Год назад

I've always wondered how a build like this one and a full Titan swapped Frontier would compare? I understand it is almost a bolt in swap, suspension and all, but I never see anything on them

@funfactor5 Год назад

I own a second-gen Tacoma and also an 84 with a supercharged 1UZ I am installing. I have a physical version of the oil pan you need if you need dimensions. I work for Toyota so if you have any questions on wiring or any other details feel free. I am a fellow Canuck too!

@robertblakley7206 Год назад

Nice too see you again! From Nebraska

@cnc75adventures49 Год назад

Awesome can’t wait to see it done 👍👍

@hummyhero1484 Год назад

The truck we always wanted Toyota to build

@madmikecustomrcrockcrawlers Год назад

Nice swap, badass truck

@JohnSmith-lw2bm Год назад

My wife calls you Syndrome, bad guy from the first Incredibles movie. I think it’s the hair.

@KiyaWarrior Год назад

love your content and i love the hair, absolute legend.

@bobbythompson7571 Год назад

Extreme 4x4 all over!...excellent video.

@BigTireGarage Год назад

Glad you liked it!

@SOLDADITO76 Год назад

Were did you get the conversion harness for your conversion. I've already converted my 93' pickup to the 3.4l and it's so much better than the 4cyl. But as we all no there is no replacement for displacement and the next thing up is a 1UZ or 2UZ. Also where did you get the transmission adapter plate.

@alexduke5402 Год назад

What do the guys we watch at work watch when they are working? Days Of Our Lives on the phone lol! Classic.

@MD-lm7fj Год назад

Wouldn't the oil pan, mounts, computer etc be the same as the 4Runner that came with this engine stock? Would love to put the 4.7 in a first gen taco crewcab 4wd with a manual.

@dadgarage7966 Год назад

Yeah. Makes sense. Too bad there're very few V8 4Runner donors out there while first generation Tundras are everywhere and falling apart.

@ajfarson Год назад

You can get an ECU meant for the 2UZ with a manual transmissions. P/N 89661-6A270. That ECU will make your setup much simpler without the need for an emulator.

@mikiodehart7932 Год назад

Is this the 5 or 6 speed manual trans? If so where did you get the adapter plate from?

@natesaid1474 Год назад

For future reference, I’ve found dipping the end of plastic fuel lines in hot water helps get them on barb fittings awesome…

@barnhouseinc Год назад

I'm falling in love with this TACO!!! 😍😍😍

@BigTireGarage Год назад

Me too

@greasemonkey4god Год назад

Been waiting for this!!!!

@PNW_Rodeo Год назад

A Fumoto oil drain valve fitted to this pan would make oil changes easy if the rack is in the way. There are plenty of different valves available for your thread pitch.

@danielhepburn4695 Год назад

Love this , I have an 05 tundra double cab limited that I want to manual swap , nice to see people using the 2uz fe in more then just tundras!

@FarmBossSaws Год назад

I have the same truck, what transmission would you use? The R150?

@allenhorne7032 Год назад

Great job, I've been wanting someone to do this, but I also want someone to put the big 5.7L V-8 Tundra motor in a Tacoma, if it's even possible. Can you imagine the torque and speed on that thang? Anyways, keep up the great work, I look forward to new episodes of Fourwheeler as well!

@671turboLex Год назад

Been done already

@DE-ok4ld Год назад

I saw a Tundra 5.7 in a 2wd Tacoma TRD racing truck a few years back.

@spankthemonkey3437 Год назад

The 4.7 or 5.7 should have been the motor that went in the new supra. I mean if they already going with a BMW motor and car they should have just threw in the V8 with a supercharger or turbo as extra option

@Tacoexplorer Год назад

Where did you get the wiring harness from?

@automotivedefenz2195 Год назад

I have the same truck. And thinking of doing a v6 supercharged swap when the engine gives way. Any ideas or links for the conversion?

@PaulGarage03 Год назад

I put the 4.0 version of this engine in my 99 tacoma, just got it running and driving, i posted a vid of it driving the other day

@donaldhaslim2823 Год назад

Yup... I want one now.

@671turboLex Год назад

Lol I did this swap in this same platform 6 years ago.

@UnbendingMetal Год назад

Mighty fine Gambler 500 flag in the shop!

@SGTCap1980 Год назад

Who made the bell housing adapter and do they make one for the 6-speed manual?

@SimonElenor Год назад

What ecu are you running on the 2UZFE? I ran Megasquirt on my 1UZ and had zero issues.

@JudahsTreeFarm Год назад

Hey Ian! I would like to know your thoughts on tire thickness like what ply do you recommend? Francis I'm driving a Jeep TJ 2 in suspension lift one and a quarter body lift with flat fenders and 35s do I need to be running 10 ply tires where can I get away with 8 ply?

@dannybutler3150 Год назад

Where did you get the conversion harness and transmission emulator from?

@brockglossop3831 10 месяцев назад

Where did you get the bell housing adapter

@Geodesix Год назад

Can you provide a link to the wiring harness you bought?

@HAHAWTFOMG Год назад

YES! YOU SHOULD TURBOCHARGE THE BEEEOTCH!!!! 🙌

@brudevold62 Год назад

I read somewhere the 2tr is a reverse rotation engine, is there anything special you have to do to the transmission or diff?

@stevew9247 Год назад

The 2uz was offered in the same year 4Runners from the factory. Use the factory power steering lines and ac setup from a 4runner.

@AntiPattern328 Год назад

Look at the V6 4.0L oil pan. I'm sure they're about the same size and would let you see the correct shape. At least none of that stuff in the middle moves so you can be pretty close without an issue.

@marktadlock5428 Год назад

How would a dry sump work out on it? Because that would help in off angle oil starvation.

@gixxxer1k Год назад

could you have shimmed up the rear trans mount to help with that angle it has the motor at?

@askytune6019 Год назад

question : you use the 3.4 flywheel or ?

@mcoffroadinaz4075 Год назад

Always wanted to put a TC and a solid front axle swap under my Tundra.

@shanewright6958 Год назад

Looking good 👍👍

@stevenpeterson7234 Год назад

What about the transmission tho. Can it even hold the power from the V8? Did you do anything to the trans?

@randy6350 Год назад

Damn it‼ Purchased an aluminum 5.3LS and a Tremec TKX to install into our Regular Cab Taco… LINKS PLEASE and MORE LINKS to where you found this kit⁉

@macktack42 Год назад

QUESTION: What are you usually watching on your phone while filming? I always see it playing in the background. Keep up the amazing content!

@max7143 Год назад

Seeing that the 2UZ came in the 4th gen 4Runner, I would assume it would feel right at home in a 2nd gen Tacoma. Looking forward to this build.

@jefflong5661 Год назад

Does Jillian know you're on RU-vid

@mikeshuck2760 Год назад

Solid axle swap, would open up under the motor.

@orangemanok5800 Год назад

I'm trying to concentrate, but all I can think of is Will Farrell doing Harry Caray.

@Golden-69 Год назад

Hot Springs in October for SCC?

@johnyhawgleg Год назад

A coworker of mine swapped a Lexus v-8 into a 4Runner a couple years ago the only problem he had was the age difference with wiring and fuel delivery.

@justinkimball1399 Год назад

asking for a friend will this work on a 3rd gen Tacoma AT ????

@trashandtrail Год назад

Interesting the O2s are in the bottom of the headers... always thought those needed to be up too to avoid moisture...Toyota breaking the rules! Nice work!

@murderface379 Год назад

Would anyone know if there is a kit for a 2WD prerunner short bed with an automatic?

@sjcperformance Год назад

When do these 4 wheeler episodes air on MTOD?

@jakehauber Год назад

Should do the marlin crawler kit up front and a linked spider 9 in the rear!

@BigTireGarage Год назад

Not for this one...we have a plan to do a Marlin Kit on FourWheeler

@ObscuredTravel Год назад

They make a kit to swap the tundra steering rack too. Might pull that over while you’re at it.

@EliezerMessias Год назад

Opa.. Top.. sempre curtindo aqui do Brasil..

@nickg0411 Год назад

Ian, wasnt there a V8 4runner in that generation? wouldnt that be a simpler swap if you had the pan and parts from one of those?

@volcom514 11 месяцев назад

Dang dude! I remember seeing you and jessi on spikeTV Xtreme 4x4 back in 05 🤘🏼 love the content!

@BigTireGarage 11 месяцев назад

Thanks for watching!!

@tdtgolddragon 7 дней назад

Makes me want to scroll Marketplace for a Taco!

@wintonhudelson2252 Год назад

I've never used that type of throwout bearing yet. I don't know if the bearing face is supposed to be in constant contact with the pressure plate fingers? If it is in contact full time, won't that lead to premature bearing wear?

@BigTireGarage Год назад

Depends on the bearings some are designed for constant contact...other have an air gap

@kevinb6231 Год назад

What trans and where did you get the adapter???? Thinking I need to do on 1 gen 4Runner!!!

@BigTireGarage Год назад

I will go through everything in a future vid

@chad2886 Год назад

A flatbed tray and popup camper like the down to mob gladiator would be sweet on that truck

@garygravante9496 Год назад

Are there any changes to the fuel system to supply the V8 vs the I4?

@BigTireGarage Год назад

Not sure..gonna check pressures and if I need more I will swap the pump inside the module of the Taco

@alanrichards3181 Год назад

Love it

@JimmyKeane825 Год назад

Everytime i see the jeep on the table i just wanna know more lol

@rodneyharouff5739 Год назад

i remember that truck from 4 wheeler. yer the first you tube guy i've seen actually use hand tools instead of battery powered stuff. 🤣🤣

@fredschupner6948 Год назад

I have exactly the same coffee maker... Lol

@thomasreynolds4455 Год назад

The music before you talk about the bolts reminded me of something, had to find it. Took a minute but it was a song from the movie Snatch. Disco Science. Fat tires rule and front fenders suck!!!

@Mikey_556 Год назад

I love to see sas’ed 4runners and tacos, makes a whole lot of room for different engine combos

@Natschke_Family_Adventures Год назад

Tacoma. Tacos are food.

@Mikey_556 Год назад

@@Natschke_Family_Adventures lol good food at that

@vmoney9106 Год назад

I have a 2012 Taco and a 2007 V8 4Runner, and I have been thinking about this very same swap for a while now. you're basically building a newer first gen Tundra

@vmoney9106 Год назад

Also, I'd like to see a 2TR swap into an older pickup (instead of a 3RZ)

@phillipredfern6461 Год назад

Curious how the trans/transfer case and axles are gonna handle the added power of this swap.

@connorm1600 Год назад

The R155F is suppose to be pretty strong so it should be fine. The r154 is very similar and supra guys use those.

@markwelliver2566 Год назад

the rear axle in this tacoma should be the Toyota 8.4 which is the same exact diff thats in the tundra the engine came out of..

@FarmBossSaws Год назад

The 4.7 is one of my favorite Toyota engines, I don't understand why Toyota didn't make a 4.7 taco in the first place.

@sergioromero3696 Год назад

Would take buyers away from the the Taundra.

@dukenukem7183 Год назад

Who's kit?

@michaelsummers6769 Год назад

6speed manual/ transfer cases from a Fj would be a great upgrade with the AWD, lock diff to make it true 4hi and 4low transfer case. on all land cruisers and 4Runners. just my thoughts as AWD is best for dirt & snowy roads.

@BigTireGarage Год назад

I already swapped in the FJ cruiser T Case

@christianwolf68 Год назад

i would get my hands on a new V8 and swap it into a new 4Runner worst thing toyta did was to take the v8 option out of the 4runner platform

@Captndarty Год назад

How about doing a mod video on throwing a 10 speed automatic in the 5.7 tundra?

@loganclark312 21 день назад

Can you keep factory 2wd auto trans with the 4.7 swap?

@BigTireGarage 19 дней назад

It would depend on what 2wd trans you had

@xozindustries7451 Год назад

Very cool build, I’m surprised more people don’t do that swap

@BigTireGarage Год назад

Its a lot of moving parts to make it work...but it will be awesome!!!

@oldowl4290 Год назад

@@BigTireGarage What engine was in the Tacoma and what exact manual transmission do you have? I have a 2UZ Tundra that I want to do a manual swap in but for example cant use the 4.0L FJ / Taco 6 speed because no one makes an adapter or bellhousing. So, Im very curious what you have. R151? R151F ???

@bannedbycommieyoutube5time920 Год назад

@@oldowl4290 not sure on the transmission, but it’s the 2.7 liter straight 4 cylinder. 2TR-FE

@oldowl4290 Год назад

@@bannedbycommieyoutube5time920 thanks, it would mean you have the W59 which is a 5 speed. Im shocked that the A340 (automatic trans) bellhousing would bolt right up to your W59 and work properly. That’s a great stroke of luck.