Vacuum Forming MAGIC for CAPTAIN DISILLUSION!

Подписаться 728 тыс.

Просмотров 106 тыс.

50% 1

When Captain Disillusion calls, you answer! Our hero and fellow RU-vidr needed a cool, detailed panel for his latest video (link below) and we were more than happy to help using our vacuum forming machine!
Links:
Captain Disillusion
/ captaindisillusion
New video featuring our panel: • Flight of the Navigato...
Giaco Whatever
/ @giacowhatever
Kickstarter: www.kickstarte...
Mini Vacuum Former Video
www.punishedpr...
Tools & Materials:
3D Printer - Ultimaker
ultimaker.com/...
Spot Putty - Amazon
amzn.to/2u0cE9S
Drill Press - Amazon
amzn.to/2BGhiul
Sandpaper - Amazon
amzn.to/2qfQRXo
0.03" PETg - Amazon
www.amazon.com...
Vacuum Former - Homemade!
www.punishedpr...
Baby Powder - Amazon
amzn.to/2tLXmDK
Masking Tape - Amazon
amzn.to/2mDrgE5
Rotary Tool - Amazon
amzn.to/2TI5Gj7
Face Shield - Amazon
amzn.to/1XlzfSi
Rubbing Alcohol - Amazon
amzn.to/2SZRRAN
Blue Shop Towels - Amazon
amzn.to/2z5Wm2q
Spaz Stix Mirror Chrome Paint - Amazon
amzn.to/2tOfMDK
Airbrush - Amazon
amzn.to/2afTLBT
6mm EVA Foam - Various Vendors
punishedprops....
Heat Gun - Amazon
amzn.to/3byYS1b
Super Glue - Amazon
amzn.to/1y8ynly
Punished Props Mission: Transforming passionate fans into confident, skillful makers. Find out more at www.punishedpr...
Fun ways to help our channel:
Join our Extra Credit Club! punishedprops....
Buy our books! www.punishedpr...
Share your projects with us on twitter!
/ chinbeard
Music from artlist.io/
Getting Ready by Ziv Moran
Through My Eyes - Instrumental Version by Duce Williams
Acadia by Last Coast
For Now by Marble Empire
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 364

@punishedprops 3 года назад

Check out the full list of tools & materials used in this video at www.punishedprops.com/2021/05/20/cpt-disillusion-panel/

@gedion4000 3 года назад

heres am amature tip (cause im not a pro lol) once you have it in the vacuform machine with the vaccume on, if you don't get some of the detail you want you can heat up the area you want to target with a heat gun to get more depth in the detail. alternatively you can use a desoldering station that has a very narrow output for the heating element that will allow you to target the area you want. have to be careful with the 3d print underneath, but with other heat resistant materials it works a charm. Cheers!

@somefreshbread 3 года назад

A 15-second shot in the episode to demonstrate one tiny thing in the movie included a couple of hours of work here and a couple hours of 3d modelling work. Absolute pros.

@punishedprops 3 года назад

Just the tiniest peek into what goes into making props and costumes for film!

@GargoylePrincess 3 года назад

The crossover I never knew I needed but I’m very glad it happened

@punishedprops 3 года назад

Surprise!

@2handsomeforlaw 3 года назад

Yes, this was awesome!

@squackles 3 года назад

I saw that in the CD video, and thought "Oh that looks so cool, wonder who made it!". Oooof course it was you!

@punishedprops 3 года назад

;)

@JomasterTheSecond 3 года назад

Love with your heart, use your head for everything else.

@mecurian485 3 года назад

I take that literally every time I want to hammer a nail. The doctors are worried, but interested.

@RKroese 3 года назад

@@mecurian485 Luck is like a hammerhead. You grab the handle and hammer away. And if the luck is a little lose. Luck might hit you in the teeth. - Herman Finkers

@hannahmccall446 3 года назад

"five sixty forths, that sounds right." *cries in metric*

@punishedprops 3 года назад

I'm right there with you

@leifvejby8023 3 года назад

How much is that in decimals? ^_^

@Yorie1234 3 года назад

@@leifvejby8023 0.078125 inch or 2mm

@catfish552 3 года назад

Yeah, that doesn't sound right. That'll never sound right.

@blizatrex 3 года назад

Really neat. I could see that as an Easter egg in flight of the navigator.

@punishedprops 3 года назад

I guess we sort of are!

@loop5720 3 года назад

What's nice is that Captain Disillusion is premiering right now.

@punishedprops 3 года назад

We may or may not have planned that ;)

@terribleauthority 3 года назад

Why are you locked in the bathroom?

@felixbelanger2659 3 года назад

It's a great thing the release of both videos was timed, I was expecting to see CD's video a year later lol... It's insane the amount of work he puts in each video

@punishedprops 3 года назад

Right? It was a fun collab!

@beefknuckles 3 года назад

Oh shit! That's sooo awesome that you're the one who made that prop! I actually exclaimed "Woah!" in excitement in the Captain D vid when he explained the process then whipped out a real life version with his logo. Great job bro!

@punishedprops 3 года назад

Tah dah! It was fun to work on!

@keiishere511 3 года назад

This has that "I'm asked to help my dad but I'm just sitting there while my dad work" kinda vibes

@Justrex01 3 года назад

Love the detail! I haven't vacuformed anything since the days when I made signs for a living. Such a cool piece of work!

@punishedprops 3 года назад

Thanks! It's a very cool (but sometimes infuriating) process!

@olivierl2172 Год назад

Great work man. And thanks RU-vid for recommending me this. Now it's off to watch (again) Captain's video.

@Anora_ 3 года назад

Man, that just looks so smooth and perfect! Well done :)

@punishedprops 3 года назад

Thank you!

@Paul_Lane 3 года назад

Love the Dracula names you gave to the vacuum forming devices.

@BrianSantero 3 года назад

OMG TWO OF MY FAVORITE TUBERS!

@punishedprops 3 года назад

Huzzah! Thanks very much for watching!

@3nertia 3 года назад

So neat to see two of my favorite RU-vidrs collaborate on something I loved from my childhood! Hopefully you two could work on a Flight of the Navigator sequel together! :O :D

@punishedprops 3 года назад

That would be cool!

@PeddlerOfSmiles 3 года назад

That is SUPER interesting, I hadn't even considered him using practical effects for his explanation. Thanks for documenting this.

@punishedprops 3 года назад

;) Thanks for watching!

@DasGanon 3 года назад

The retractable badge holder for your chuck key is one of those blindingly obvious in hindsight things. Like I'm sitting here going "how the heck have I never thought about that???!?!" angry with myself it's such a good idea

@Toleich 3 года назад

I know, right?

@punishedprops 3 года назад

I'm sure it took me longer than necessary to think of it in the first place XD

@aprilblackregentart6647 3 года назад

That is so pretty!

@punishedprops 3 года назад

Right? We LOVE how this super shiny chrome turned out :)

@sltcnore 3 года назад

I didn't know this process existed! So fascinating to witness. Thank you for this skillful creation and explanation!

@punishedprops 3 года назад

Cool huh?

@commanderwyro4204 3 года назад

i am getting a vacuum former from a guy online soon and am super excited for it. cant wait to make my own custom visors for my helmets!

@punishedprops 3 года назад

Hey that's awesome!

@radicalxedward8047 3 года назад

I’m new to this channel and it being the 1 of only 2 diy/maker sorts of channels I watch that uses imperial really throws me especially when working with 3D printed stuff.

@punishedprops 3 года назад

Yeah I try to use Metric whenever I can, it's what I prefer but sometimes my tools are in Imperial

@Yourhatedquestion 3 года назад

Today I learned the rough terrain about a skill I didn't know existed until yesterday when I saw CD's vid

@punishedprops 3 года назад

Tah-dah!

@TheConGaminator 3 года назад

I have a slowly growing art channel. I just want to say, the work *you* guys do is inspiring to me.

@RSpudieD 3 года назад

Turned out so cool! Nice work!

@punishedprops 3 года назад

Hey thanks!

@sharky255 3 года назад

So cool thanks for the insight on how a prop like that is made!

@punishedprops 3 года назад

Thanks so much for watching!

@motionsick 3 года назад

Nice with the chuck key retractor. I put those on all my drill presses.

@punishedprops 3 года назад

It's so handy!

@everett8435 3 года назад

I love everyone involved here! Great work Bill and team!

@punishedprops 3 года назад

Thank you kindly!

@carlosortega3d 3 года назад

I fricking love watching this type of colaborations. Awesome work!!!

@punishedprops 3 года назад

Hey thanks so much for watching!

@Hall_Meli 3 года назад

6:58 had me laughing - both at the sound & Bill's expression XD

@punishedprops 3 года назад

Our vacuum's a little special :)

@MeatSim9 3 года назад

I saw Captain D's video in my suggested, but was holding off for no real reason. But now I know to watch for that panel. :D

@punishedprops 3 года назад

Yeah! Check it out!

@ImaginationToForm 3 года назад

Great job. That last bit of video makes the panel look on fire.

@punishedprops 3 года назад

Thanks! I LOVE how the chrome reflects light so well

@FlyingWoookie 3 года назад

I love the names of all the equipment in the shop 😂💖 it’s cracking me up

@punishedprops 3 года назад

Prop making is serious business 😂

@BeInspiredwithDominic 3 года назад

That's a cool little project, and lots of good info to keep handy. I love the effect you get from backlighting this - "the thumbnail is lava" is a game not played often enough. Thanks for sharing, Bill!

@punishedprops 3 года назад

Hah! Thanks so much for watching!

@VacFink 3 года назад

I love the simplicity of that vacuum forming machine. Very easy for anyone to build and meet most needs. I went whole hog back in the day and built a big daddy 2x4 ft former from the TK forums and its 500lb of steel and fire breathing glory that's too massive to use most of the time. The tip here is get as far as you can with simplicity and you'll have a heavier wallet and more shop space!

@punishedprops 3 года назад

Wow! That's awesome!

@lewismassie 3 года назад

Like a true VFX master, the Cap knows when to use a physical model haha

@punishedprops 3 года назад

It's an important skill!

@BleughBleugh 3 года назад

Need to check out Draft angles and also putting more holes into the thing to pull the air through

@punishedprops 3 года назад

The draft angle on this was totally fine but I should have added a pocket on the under side of the master to distribute the suction more evenly.

@jeffmoore6917 3 года назад

That poor printer needs some love, with the amount of putty used, it is slacking a wee bit. But, it appears it made it possible to see what you do to fix it.....so, it all worked out. Excellent work as usual.

@punishedprops 3 года назад

Yeah it's been a little temperamental lately, but I tend to use a decent amount of putty regardless if I want a really nice finish

@FeardoGaming 3 года назад

Brilliant. Still loving your stuff. Luvs 😘

@punishedprops 3 года назад

Thanks so much!

@SkellyHell 3 года назад

When I saw this in the Captain's video, I assumed it was just a special effect like he often uses for examples, didnt realise it was fully practical!

@punishedprops 3 года назад

It sure is!

@ritzmillan7033 3 года назад

Liked how you just reused the tape !

@punishedprops 3 года назад

Might as well!

@classicalandexperimentalmu320 3 года назад

This is AWESOME ! ! !

@punishedprops 3 года назад

Thanks so much!

@goldenboy82 3 года назад

Cool I saw Captain D's video on Flight of the Navigator but didn't know that Punished props made the Chrome prop he used to explain how the backlighting worked in the film.

@punishedprops 3 года назад

We sure did!

@VariablePenguin 3 года назад

That's was cool and his video was really a fun watch.

@punishedprops 3 года назад

Awesome! So glad you enjoyed them both!

@fakermakerprops3948 3 года назад

Ahh this is the best day of my life!

@Gunbudder 2 года назад

i was wondering who made those awesome vacuum formed parts!

@punishedprops 2 года назад

It was so great to contribute a tiny bit in such an awesome production!

@liljenborg2517 3 года назад

Those little holes you drilled won't work very well if they don't line up with the holes in your platten. You need a little bit of a hollow under your puck so your vacuum will distribute through those holes and suck your plastic down into those details.

@Vangelis2019 3 года назад

I was thinking the exact same thing. It would save filament too. 👍

@schizoidhaus 3 года назад

i was gonna comment the same, he could also raise the print with washers or something

@punishedprops 3 года назад

Thanks for the tips!

@chrispysaid 3 года назад

It's 30:06 in the Captain's video for those who want to see the prop, but the whole video is worth the watch!

@punishedprops 3 года назад

Thanks!

@ku8721 3 года назад

The most important thing I learned here is THERE IS A NEW CAPTAIN DISILLUSION VIDEO!!!!!! Its been almost 6 months! This was like waiting for new Rick and Morty

@punishedprops 3 года назад

Surprise!

@jamesbarisitz4794 3 года назад

Very cool setup. Looks easy to build and practical. ✌

@punishedprops 3 года назад

Thanks!

@haganshabba 3 года назад

Just earned a new sub

@bzqp2 3 года назад

Good timing. I'm preparing myself to build my own DIY vacuum form! :D

@punishedprops 3 года назад

Sweet!

@bzqp2 3 года назад

@@punishedprops I also have one more question to you guys. I just watched your video on priming EVA foam for painting. Unfortunately - you only test the side without the texture on, which is very easy to paint. But how to prime the side of the mat with the texture on?? It has some nasty finish that I can't paint with anything I tried. Nothing seems to bond to it. I'm planning to repaint my 9-year-old N7 Armor soon but I can't seem to find a reliable technique (the last paint I used worked for a few months, but now after 9 years it's chipping off like crazy)... :( :( I know that you also have a similar N7 Armor so you had do solve the exact same problem somehow.

@billbucktube 3 года назад

Excellent set of tips and experience!

@punishedprops 3 года назад

Glad you found it helpful!

@hunterdouglas9765 3 года назад

“Five 64ths; that sounds right” *sighs in metric

@punishedprops 3 года назад

We're right there with you - we definitely prefer metric

@dogwalker666 3 года назад

Agreed 3D printer hi tech equipment then uses 5/64" drill.

@kenlizak7698 3 года назад

You can use a heat gun to get those little areas to sink more into the mold. just dont go too close or hold too long over an area. waving the heat gun around in small circles will help.

@punishedprops 3 года назад

Thanks for the tip!

@steprockmedia 3 года назад

Dude! You guys made that piece?? It looked great in the CD video earlier today

@punishedprops 3 года назад

We sure did!

@JormunB 3 года назад

You knocked it outta the park, gang. Beautiful stuff!

@punishedprops 3 года назад

Thanks very much!

@LootGoblinPenny 3 года назад

I would love to see some Castlevania inspired props, like the Morningstar Whip or Alucard's blade, or maybe some armour.

@punishedprops 3 года назад

Thanks for the suggestion!

@umbraelegios4130 3 года назад

Like the "hack" of having the chuck key on a retractable leash.

@punishedprops 3 года назад

So handy

@spitfyr97 3 года назад

the sanding king, back in action.

@punishedprops 3 года назад

You're too kind :)

@reddcube 3 года назад

FYI 5/64 inches is a 2mm drill.

@punishedprops 3 года назад

Yeah I have both metric and imperial in the shop and often switch between the two! Wish we could all just settle on metric though :)

@sulpheralchemist 2 года назад

This might be done as set dressing but I noticed you have your mask hanging on the wall behind you. you can drasticly extend the life of the organic filters by storing them in an air tight container. it stops them reacting with random organic vapors in the air.

@TheConGaminator 3 года назад

Great work! This looks really neat!

@punishedprops 3 года назад

We love how it turned out!

@tlac4120 3 года назад

Great work! As always.

@punishedprops 3 года назад

Thanks!

@dew9103 3 года назад

I thought its just a 3d model, but very cool stuff

@noxsamus397 3 года назад

just watched CD video, and now this ... amazing how simple some stuff is to make and have so cool effect when its done. you see it has not to be that hard to make cool sh!t.

@punishedprops 3 года назад

Right?

@KATStudio 3 года назад

lots of effort for a few seconds shot, that's insane!

@punishedprops 3 года назад

That's Showbiz, baby!

@dogwalker666 3 года назад

Its common for model shops to spend ages building a prop or model only to never be used.

@everett8435 3 года назад

The song of Vlad the Inhaler now available on iTunes. :D

@digitalsparky 3 года назад

only problem is, their music sucks.... :P

@punishedprops 3 года назад

Bahahahaha!

@AlRoderick 3 года назад

The vacuum forming machine is a SoundCloud (w)rapper.

@usjdhsuakndhd 3 года назад

I love your content Bill, I've been watching since you made the Sea of Thieves Skull. I love all your videos

@punishedprops 3 года назад

Thanks very much! We really appreciate your support :D

@mxferro 10 месяцев назад

You could have just spray paint with high quality fine mist like Tamiya. It would have already filled in the smaller gaps and thin layer eliminate visible rough texture as the plastic thickness vac over it on back side would have smoothed out on it's own.

@liamthedevastator 3 года назад

AMAZING!!

@punishedprops 3 года назад

Thanks!

@JMulvy 3 года назад

I love CD!

@punishedprops 3 года назад

Us too!

@tomaszkubala6266 Год назад

Wow i saw the video wayyyy before i seen this.

@wesallen3926 3 года назад

just watch the Kickstarter video for the kinetic-driver, I GOT CHILLS...

@punishedprops 3 года назад

Right? Giaco knows what he's about

@wesallen3926 3 года назад

@@punishedprops I''m definantly planing to get one and build a steam/diesel punk theamed hybrid solar/kennetic driven rotating stand for the driver as part of a 2 part project so I can put it on display next to a Coffee Engine once I get one of each. I've got an idea for a hopefully infinantly moving coffee engine that Should virtually "never" stop if all goes well. The stand I want to build for the driver uses the same basic principals and mechanics as a self winding pocket watch to maximize the kenetic potential of the driver to reverses and dampen the energy to spin the stand/display in the opposite direction at a slightly slower speed and storing the energy in the self winding mechinism... So if I start the driver in a clockwise spin, the display on which is sits should spin in a counter-clockwise rotation till the mechanism collects enough stored energy to reverse kenetic energy in on its self pushing the stand into a clockwise rotation causing the driver to rotate counter-clockwise, and vise versa. I've also thought about doing this with an antique or reproduction Pull string Spinning top.

@NOLNV1 3 года назад

you can really make some pretty big stuff in an instant with vacuum forming!

@punishedprops 3 года назад

Right? It's a very cool process

@Noone-of-your-Business 3 года назад

"Vlad the Inhaler" was already pretty good, but I did not expect you to hit me over the head with "Count Vacula" right after recovery.

@punishedprops 3 года назад

;)

@ApertureAce 3 года назад

I love the Half Life Alyx grenade measuring tape

@punishedprops 3 года назад

Thanks! Here's a video showing how I made it: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pqnkX5em7f0.html

@ApertureAce 3 года назад

@@punishedprops I was curious of whether or not you had a video of that. That's pretty awesome, thank you!!

@bogdand7138 3 года назад

Did he... pull the sticker off... in one go? WITCH

@hipnosedesign 3 года назад

very gooood!!

@punishedprops 3 года назад

Thanks so much!

@vwluis 3 года назад

With plastic it's more complicated, i vacuum form a lot of plaster molds, and to get better details it's great to preheat the mold, a few degrees make a big difference, I personally for petg get at least 60⁰C on the mold.

@punishedprops 3 года назад

Yeah we actually were able to do that on one of our 3D printed bucks but only because we printed it at an extra high density so it could handle it

@2handsomeforlaw 3 года назад

"the Bungholer" made me laugh out loud! :D

@punishedprops 3 года назад

We keep things nice and silly around here :)

@sharpfang 3 года назад

I wonder if you could get deeper imprint if you heated the 3d printed mold a bit - not anywhere near melting temperature, but a good bit above ambient. That plastic sheet has an awfully low thermal capacity, meaning the moment it touches something cold, it cools down and solidifies immediately in that spot (and drains heat from adjacent areas solidifying them too). Keeping the mold warm should allow the sheet to flow more.

@punishedprops 3 года назад

Very possibly!

@MidnightMaker 3 года назад

This is like e-mailing a wrench to the ISS...

@JamFam1957 3 года назад

that’s pretty frickin epic 🤩

@punishedprops 3 года назад

Thank you very much!

@AcheForWake 3 года назад

5:30 and 9:25 had my 6 year old laughing out loud. ‘What are you doing sticker!’ I watched the CD video first, great to see RU-vidrs collaborating :-)

@punishedprops 3 года назад

Gaaawww

@tzisorey 3 года назад

You should make a project of making a pouncing bag - because that's GOT to be a better way than just shaking a stock-standard bottle of talcum powder over your project.

@punishedprops 3 года назад

It very well could be!

@icedog75 3 года назад

...Bungholer...now I have to name my drill press...

@punishedprops 3 года назад

😂😂😂

@onickss5663 3 года назад

Love the vids keep it up

@punishedprops 3 года назад

Will do! Thank you for your support :)

@Brimannn1 3 года назад

9:26 I TOLD YOU NOT TO BOTHER ME WHEN IM CLEANING MY ROOM!

@punishedprops 3 года назад

Ha HAAAAAA! X'D

@danieldimitri6133 3 года назад

Isnt that spaz paint great? Best chrome effect ive ever used by far.

@punishedprops 3 года назад

It's a great product!

@thecloneguyz 3 года назад

CAPTAIN DISILLUSION FOR RU-vid REWIND 2021!

@punishedprops 3 года назад

Woo!

@uelssom 3 года назад

nice!

@punishedprops 3 года назад

Thank you!

@JonathanLaRiviere 3 года назад

11:04 thus begins some of the best maker ASMR 🤤

@JonathanLaRiviere 3 года назад

Ohhhhh that silent slice at 11:25 😌

@punishedprops 3 года назад

Glad you enjoyed the video!

@AcrimoniousMirth 3 года назад

May be worth experimenting with just printing top infills at like 90% or something instead of 100% so there’s some porosity, replicating the porosity in plaster of Paris forms and so on.

@punishedprops 3 года назад

Yeah I'm not sure how that would work! It may not withstand the heat of vacuum forming as well

@AcrimoniousMirth 3 года назад

@@punishedprops me neither but could be worth a shot! I’d experiment with it myself but I don’t have enough room in my cramped flat to add in a vacuum former as well 😂

@Glen_lastname 3 года назад

Look at mister fancy pants here with his drill press that's not 50 years old, I have never seen one in such good condition outside of the show room.

@punishedprops 3 года назад

I've had it for a while and do my best to take good care of it!

@Glen_lastname 3 года назад

@@punishedprops looks like your doing a pretty dam good job 👍

@radicalxedward8047 3 года назад

I’ve seen a lot of different diy vacuum formers, but I’ve never seen anyone add any sort of scale to eyeball a more accurate idea of how far the plastic is sagging since that seems to be so important to the fit / finish. I wonder why that is.

@punishedprops 3 года назад

Probably because it's inconsistent and totally dependent on the plastic and heating conditions

@sauronsauronsauronsauron8891 3 года назад

Great Vid. I was asking myself if you had abandoned vacuum forming after building the large heating box and vacuum plate a while ago, which would have been a damn shame! Would you try out a larger vacuum forming project with your larger plate and frame for chest armor (or the like) to educate us on the challenges of larger projects? That would be awesome! I even saw a maker video once where some used high density eva foam successfuly in vacuum forming instead of styrene or petg....Cheers from Germany!

@punishedprops 3 года назад

I'm not sure! If we come up with a costume that needs the process then we'll definitely try it out :)

@adamshinbrot 3 года назад

Have you thought about creating a small ledge on the underside of the mold, so there is an air gap between the bottom of the mold and the top of the platen? Otherwise the small holes you added to the mold back up onto solid board and are not likely to help pull the vacuum.

@punishedprops 3 года назад

I definitely should have done something like that, I think it would have helped to get those little crevices to form better