Vacuum repair man shows how to replace a Dyson DC40/UP19 COV hose 

Exhaust filter! I replaced both hoses but this one was the tricky one. It would have been impossible to fix without your tutorial. My Dyson has been out of commission far longer than it should have been. I only wish I had seen this video sooner. Thanks!

Exhaust filter - thanks, fixed this throwaway Dyson with your help - retired guy, a 32$ hose and 9$ torx set - keep making these and thank you!

Replaced the COV on my DC40. Your video was a great help. Your hint to look down the vac intake port to insure that the foam seal was properly inserted probably saved me a lot of work. There a good chance I would have missed that one. Thanks

"Exhaust filter" :-) Thank you so much for so generously creating this video. I now know where to start. Fingers crossed I can pull it off.

Thank you! While cleaning a clog today the entire wire frame of this hose came out. I have my parts on order now and will fix it back up this week with the help of this video.

Thank you so much for sharing this video. I was able to fix the vacuum for $12 instead of buying a new one. Your tips on how to insert the hose were very helpful as well.

Thank you! I was thinking I was going to have to buy a new vacuum but I fixed it thanks to you!! Appreciate this video. Very helpful

Thanks! I couldn't have completed this project without your excellent video.

“Exhaust Filter” Thanks a ton! Hugely helpful.

Saved myself buying a new dyson!!! Huge thank you such clear and short instructions. All works well now.

Thank you so much for your step by step help. We watched it to the end and if it wasn't with your help we couldn't have fixed it. Thanks.

Thanks, great directions for replacing cov hose. After looking at another video I figured out and was able to see the holes in the hose that I need to replace.😊

Exhaust filter. Just finished doing this job whilst playing and pausing your video which made the job easy, thanks very much indeed.

Great video, saved me a lot of time and money, your lead in to what tools helped, I had to buy a T8 and T15, Harbor Freight 6 bucks

Thank you for a very helpful video. Thank you for posting what screwdrivers were needed at the start of the video. It still took me 3 stores to find the right one. I started with your older video and had paused it right before you mentioned what size. Vacuum back up and running great. This is the 2nd part (1st was the long suction hose) I've replaced on my Dyson, so glad I can replace these parts rather than have to replace the whole vacuum. Exhaust filter!

Fantastic video. Your instructions and hose part link to Amazon saved my vacuum!

Looks very useful and easy to follow, have ordered the part so hopefully the fixing the replacement will go smoothly! Thank you

So I watched and Im ready for the job! Thanks so much for making it so easy with the links to the parts and tools . I'll be back after I receive the parts and attempt the job . Thanks so much !!!!

Really helpful video I'm just about to replace this hose on my daughters DC40 and your video should make it much easier to do. Many thanks.

Thank you. This was so helpful. Don't forget the exhaust filter.

With the help of this video able to fix my DC40.. Thank you... Exhaust filter.

Thanks. Super helpful. No suction on my DC40... opened it up and saw the torn hose. Came immediately to RU-vid and saw this... That T8 is rare... searched in my garage and I do not have one. Just placed an order on Amazon for a set because Home Depot doesn't have one either.

Great explanation!.Saved me time ,money and dignity!

Thank you Sir for such a clear video step by step, you have save me from having to buy a new vacuum! Thank you Adrian

Ordering the part hopefully it will work. Thanks for the video

Thank you so much for this awesome video. My vacuum is fully fixed and works great again!

Great video Amazing and clear explanation it saves us so much money thanks for making this videos

Extrememly helpful - I'd nver have done it without this video. Thanks!

Very well done. Thank you very much

Fantastic video. Very helpful and made me save a bunch. Thanks a lot!!!

Fabulous video !!! this was concise and to the point. non of that 'wazzup guys' nonsense. and I fixed my Dyson. Thank you so much!

This was an amazing video! I was able to do this myself and saved me so much money! Much appreciated!

Thanks, I am going to try it myself! You made it look very easy.

Thank you for the tutorial on how to repair our DC40.

It worked!.....Great video....well done man. I used furniture wax to stick that small screw to my unmagnetised screwdriver.....worked a treat. Thanks again

Thankyou so much! Clear instructions and a now a properly working vacuum.

Very helpful video! Thank you!

Thanks for your video. Great help!

Thanks for the video, I've now got a working Dyson again 😁.

You make this look DOable. I will order the part and give it a go! Thank You!

Watching to make step chart as hose here tomorrow. I have used painters tape to keep from dropping screws. Thanks for your video.

Excellent video for a difficult task. Very well done

Exhaust filter! Excellent video. Thank you so much!!

Thank you sir!!definitely helpful, the wife will be happy 🎉

thanks for your detailed video .

great tip about checking the foam seal was correctly seated, thanks

Exhaust filter- Thanks so much, very helpful 🙂

great instructions!

Excellent video. Thank you!

Great help, thanks.

2nd time you've helped me, thanks again!

Thanks. Very useful video. Very clear and well taken

Thank you for the video. You saved my day.

Thank you, you're a life saver

Thanks so much! Very helpful!!

Thanks man, great content.

Thank you! Great video . Was easy with your direction!

Great help. I should have been more careful about keeping track of which screws came out from and where. Unfortunately although you mentioned short screws I was still not sure which screws were being referenced, the regular small ones or the ones with the very short ones . Hopefully I got it right 😜

Thanks for the guide! Saved me $$$

Really helpful video, saved me ££’s. So a big thank you from us across the pond in Wales.

Thank you for the video, very well demonstrated.

Thank you, you're video helped out. So easy.. 😊

Very helpful; thanks!

Thank you so much video is extremely helpful

Exhaust filter thank you so much!!

Thanks very helpful

Thanks! Saved us a bunch of money!

Thanks - ever so helpful.

Thank you so much. Saved me

Very clear Thanks

You are the rock 🙌🏽🙌🏽🙌🏽 thank you for sharing.

Exhaust filter :D Thanks for your help

btw you have made my wife so happy!

You just fixed my vacuum cleaner! :)

Thanks so much for your instructions and all looks well and sounds okay. I washed one of the filters too. the inside is spinning and i cant see any blockages, but why doesnt it seem to have much suction. I was expecting more. My Dyson, last year, was so heavy to push round and even before i replaced the COV, it seems too light still... Hmmm.

Thank you!!!

Thanks!

That pneumatic drill is so nice

Super greatfull! Thank you! 🤟😎

Super thanks. 👌

It helped, thanks.

Brilliant 👏

Exhaust Filter - 'Sorted' thanks.

Gracias!

FANTASTIC!

'exhaust filter' Thank you!!

Exhaust filter! Thanks!

Thanks for this video, very much appreciated. I have 'Dyson Light Ball™ upright vacuum' and has lost suction in upright position. I checked the hose, looks fine. What could be the reason? please advise.

So many different screw sizes. Makes it really tricky

Excellent e filter

Thanks, this was a big help. I still have a problem however. I wish I could attach a photo here. There is an air gap between the cross over hose flange when it is in the attachment vaccum mode. However the floor vaccum mode it seals properly.

Great help. now I need to order part and I will be back. wish me luck... lol

Hi. Thank you very much for taking time to upload an excellent video. I was able to follow all your instructions except for seating the plastic washer. I ended up not putting the plastic washer and using the screw directly. Would that be an issue?

Thanks

Amazing video! Thank you so much!!! My husband said it would need to be done by a professional, or just leave it as it is, as he couldn't see how to do it. Thank goodness for RU-vid! With a little time and patience I managed to do it. I'm off to test it out now 🙂

Exhaust filter. Skipped out on Mark of the Ninja & Uncharted 3 on Crushing today to try and fix this but I’m missing and waiting for the hose replacement (the smaller one) and a the T-8 screwdriver.😅🙏

Fabulous video. Helped me a lot. Thank you. (I blumin hate Dysons! Over-engineered plastic nonsense)

Exhaust filter... Easiest video to follow for this change

Exhaust filter! Thank you.

Hi!!! Amazing content!! Could you please do a similar video for the Bissell crosswave pet pro hose? Or how to replace the whole foot. Seems once this hose breaks, Bissell won’t let the machine start, and there are no replacements… only replacement of the whole foot 🥲 in from Peru and Bissell isn’t sold here so no customer service options for me. Hope you can do this. Thanks for all your amazing content!!