No video :(

Van Racking for Joiners - Building my Tool Storage

Подписаться 58 тыс.

Просмотров 85 тыс.

50% 1

My favourite countersink - amzn.to/3soLkkM
Stanley Saw Horses / Trestles - amzn.to/44B0MYq
A New way to support the channel. Send a donation direct to me via my Website - bradshawjoinery.co.uk/shop/se...
If you’d like to support the channel so we can make more videos please consider becoming one of our Patrons or sending a one off donation Via PayPal or Give Back to the channel using Super Thanks via the thanks button above.
PayPal Donation - paypal.me/OliverBradshaw
Patreon is a simple way for people to support the channel with a minimal monthly subscription.
If you'd like to support us go to our Patreon page here - / bradshawjoinery
Or you can buy me a beer here - BuyMeACoffee.com/BRADSHAWJOINERY
Help support the channel when shopping on Amazon, if you click this link below before buying anything on amazon, I will receive a small percentage of the sale price. It will not cost you any more, so please help me out if you can.
UK: amazon.co.uk/?tag=bradshawjoi...
US: amazon.com/?tag=bradshawjoi0c-21
INSTAGRAM ► / bradshawjoinery
FACEBOOK ► / bradshawjoinery
WEBSITE ► BradshawJoinery.co.uk
#Joinery #Woodworking

Опубликовано:

31 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 89

@raydriver7300 11 месяцев назад

Brilliant job. So much thought, care and attention, even to the extent of having the carpet pile in the right direction. Now, just pop round and advise me in my workshop and shed 😂. Looking forward to your next upload 🌞

@BradshawJoinery 11 месяцев назад

Haha thanks Ray. :D Get some carpet in your shed....

@raydriver7300 11 месяцев назад

@@BradshawJoinery already got some - on the floor. It’s easier on the feet than concrete 😊

@Quaker521 11 месяцев назад

Great job Ollie. I do like to see a well-kitted-out van that's obviously had some thought put into the layout.

@ryanmcdonald8892 10 месяцев назад

Like the idea for slide out vice bench, would come in very handy!! Great video 👍

@sloansean1 10 месяцев назад

Tidy work. Place for everything and everything in its place 🎉

@timothywalsh4230 11 месяцев назад

Well done Ollie, as usual. You are an inspiration.

@BradshawJoinery 11 месяцев назад

Thankyou Timothy!

@2chipped 9 месяцев назад

Well done!

@Dazza19746 11 месяцев назад

Your going to convince yourself that drill bit was worth the spend soon 👍🏻😂

@BradshawJoinery 11 месяцев назад

Haha 😂 I bought 2 so lots of convincing required. 😂😂😀

@michaelplays2449 11 месяцев назад

Nice Job !!!

@BradshawJoinery 11 месяцев назад

Thanks Michael

@philipwilliams8114 11 месяцев назад

Another great video. Bonny 👍

@BradshawJoinery 11 месяцев назад

Cheers Philip

@sbanks262 11 месяцев назад

Absolute class

@BradshawJoinery 11 месяцев назад

Thanks matey 👍

@mrnormski9005 11 месяцев назад

I had to shelve my van when i retired, her indoors made me get a car 😅. Thinks* should have shelved her & kept the van😊

@BradshawJoinery 11 месяцев назад

🤣😂 assume her isn't on RU-vid? 😀

@scottranger1767 11 месяцев назад

Great , well done . The only thing you might want to do is line the roof, as in frosty weather the condensation will all freeze then drip on all your tools as it melts !!!

@MrBez007 11 месяцев назад

Who would do that ! My identical responce two weeks back when replacing the wheel arch boxing and finding they had been drilled through.

@BradshawJoinery 11 месяцев назад

They've obviously never had a rotten transit van wheel arch to deal.with 😂

@gav2759 11 месяцев назад

Spent last couple of days making racking for new van. I'll go and watch RU-vid for a minute, for a break from all that I thought.

@BradshawJoinery 11 месяцев назад

This made me Lol 😆😆 cheers mate

@gav2759 11 месяцев назад

@@BradshawJoinery Perhaps you can tell me, why I after moving my stuff from one van to the other, I've ended up with two vans full of stuff?

@BradshawJoinery 11 месяцев назад

@@gav2759 😂😂😂😂😂 It's called progress. I'm progressing well too so don't worry

@crm.carpentry 6 месяцев назад

With your levels, just wait till you park too close to something and go to get your level then realise you can't get it out......maybe speaking from experience 😂

@freebornjohn2687 11 месяцев назад

Would love to see you do a van conversion. I've done one and made some mistakes but on the whole it turned out well. No wonder the countersink bit is good its 57 quid!

@BradshawJoinery 11 месяцев назад

Yeah id quite like to! Seen a few dodgy videos on them hah.

@danielharphamgist8029 11 месяцев назад

Love the van rack. It's good to know I've chosen the same mix of DeWalt and festool as you. So I'm on the right path. Thanks for all the great vids.

@BradshawJoinery 11 месяцев назад

Ahh, yeah good gear, the dewalt router is just such a great tool. as is their 54v Table saw.

@danielharphamgist8029 11 месяцев назад

Yeah, the table saw is really good. And having it battery is so good.

@rossmale8715 10 месяцев назад

Those DeWalt drawers are lovely, would get some for my van but theyre not £130 nice lol

@leeedwards3783 10 месяцев назад

Great job. I need to do this to my van. I didn't see you fix anything to the structure of the van? Why not? I guess the over hanging scribe will do?

@vanzipper6486 11 месяцев назад

👍 tip-top bro...

@BradshawJoinery 11 месяцев назад

🤝 thanks bud

@petedavies4796 11 месяцев назад

great Job Ollie how about coming and doing mine Lol

@BradshawJoinery 11 месяцев назад

Haha, I quite enjoy the solution finding aspect of it to be fair

@colingraham1065 11 месяцев назад

Good well thought out design like that shows the work ethic of the user to the customer. Just hope hope some crim scumbag doesn't crowbar open the door and pinch the lot as so often seems to happen these day sadly .

@MelbourneAlan 11 месяцев назад

looking good. i couldnt trust those tools to stay there. i would put a bungy strap around just to be sure. im supprised you didnt make the side door racking double sided . its wasted space anyway so you may as well use it from the other side

@BradshawJoinery 11 месяцев назад

I did think a out double sided but only adapting now. Originally it fitted 2 layers of systainers and worked great...( But couldn't open them either.) If have to rebuild it completely to double side it and I simply don't.have the time. Adding this on was big effort! 😂

@MelbourneAlan 11 месяцев назад

@@BradshawJoinery ] i know the pain. im considering re doing my racking but the effort rewuired is hard to find and the benifits are not worth it enough to take a few days off i would take the back off or cut holes in it and then put a piece inside between the shelves half way in

@vanzipper6486 11 месяцев назад

but what has he planned to prevent tipping in the turns for the toolboxes🧐

@BradshawJoinery 11 месяцев назад

It's great bud, the carpet pile does the job and the tool boxes take a serious over 50 degree tilt to roll. (they will not roll) only think that can wobble is the table saw and that lip of timber stops it if it does. But again if I sit it that way around the bed is heaviest and it only tilts towards the side of the van. 👍

@BrainFizz 11 месяцев назад

Carpet is 100% the best thing in a van!

@mcfreedom10 11 месяцев назад

Any chance you could do a review/comparison between the festool corded vs cordless extractor? I’m thinking of getting a cordless one but worried about it having enough suction…….p.s I only use it for car cleaning so the suction is important

@pauljackson5482 11 месяцев назад

I'm a tight git too. Unless it's timmy taylors landlord!!?

@BradshawJoinery 11 месяцев назад

I'm afraid you have to be. Spend in the right places! 😀

@halken007 11 месяцев назад

whens the raffles start i want the chance to win your countersink bit lol

@BradshawJoinery 11 месяцев назад

HAHA Id enter that raffle to be fair

@richardwilkinson236 11 месяцев назад

Nicely done. What make of table saw do you have in the van? Looks nice and compact.

@BradshawJoinery 11 месяцев назад

Thanks it's the DeWalt 54v one. Great tool.

@philclennell 11 месяцев назад

One shudders to think of the consequences if the van was nicked! However, security is easy - just stick on a sign saying "No tools are left in this van overnight".

@JackDorrington-nq7gy 11 месяцев назад

Love this video! Was just wondering what software you used to do the sketch on the computer before? Thanks, Jack 👍🏼

@BradshawJoinery 11 месяцев назад

Cheers Jack, it was Trimble Sketchup

@ValgniTehki 11 месяцев назад

What was the countersink drill bit that you was using? Festool?

@S.JCarpentry 11 месяцев назад

Another great video. Came just in time as im about to rack out my new van, gave me a few ideas for mine. The screws in the drawer is a great idea. I share your fear of the organiser being open. Thats the sort of thing that happens when you've just finished a job and just want to go home after a long day 😅 do you have link to where you get the Würth screws from? Im guessing you order them in bulk

@BradshawJoinery 11 месяцев назад

I buy through a rep on account. I think it's the only way. I would shop around next time. It's difficult to find a supplier that will do every size screw though tbh

@BradshawJoinery 11 месяцев назад

The drawer inserts came from B&Q £10 screw organisers. The larger concrete screw ones from eBay but we're pricey

@S.JCarpentry 11 месяцев назад

@BradshawJoinery do you just Google a local worth rep? I made an account with them yesterday, but their site is a little herd to navigate. I'm looking for a company where I can bulk orders, though, as I need to start building a stock of screws like yourself.

@S.JCarpentry 11 месяцев назад

@BradshawJoinery I tend to get my concrete screws from toolstation

@BradshawJoinery 11 месяцев назад

Give them a call and ask for a rep. They are quite keen for business, so usually chasing you 🤣

@neilhowarth9362 11 месяцев назад

Pretty mint that mate, is that festool drill bit really worth it

@BradshawJoinery 11 месяцев назад

Yeah I think so for sure. I bought a second one for my fitting kit 😂

@johngaffney1671 Месяц назад

what is the vertical saw?

@nicklloyd-jones 11 месяцев назад

Do you stick to one brand of screw? Is it worth paying extra for Spax?

@BradshawJoinery 11 месяцев назад

Im using Wurth at the minute, but i think spax are slightly better. Gold has better corrosion resistance bit i prefer silver screws.

@planespeaking 5 месяцев назад

Hi. What size countersink with stop did you use there? 3.5 or 5mm? Which would yous recommend? I think the smaller one.thanks in advance. Also ehst scribing tool fid you use there please?

@BradshawJoinery 5 месяцев назад

I have the 5mm ones as mainly use 4-5 mm screws in general stuff. Its veritas one

@planespeaking 26 дней назад

Watching this again as just about to finish my racking for larger items and rails etc. Did the side door entry for all my l-boxx and a small parts rack to the side. I am pretty IT savvy but have really struggled in getting the hang of sketch up. So I am just going to steal some of your ideas and mix with my own. I need to persevere with sketch up though. It's vital I learn it if I am to expand my business and profitability.

@stuartmcintosh8275 11 месяцев назад

It’s a nice job, but what about the distribution of weight in the van after all seems to be a bit too much weight for one side making driving a bit hazardous

@BradshawJoinery 11 месяцев назад

Cheers bud, its not too bad, i keep the heaviest boxes lower as they are easier to lift in and out. I plan to add a small rack the other side for some trolley wheels and workbench mft style worktop. Plus the driver is rhs!

@scipiony 11 месяцев назад

Are those pouches on your pants a part of the pants or are they another brand?

@warzonekid9952 4 месяца назад

Were is this company located

@thecockneyworkshop 11 месяцев назад

Hope you don’t leave them in van overnight

@ollie9199 11 месяцев назад

Did you get a ryobi???😂😂

@BradshawJoinery 11 месяцев назад

The Ryobi is class! I have 2! 😀

@kevkeelan5106 11 месяцев назад

The amount of times, Ive hit my shins on those rear steps 🤬

@BradshawJoinery 11 месяцев назад

Will help your knees in later life though... 🙌👍

@williamosullivan3553 11 месяцев назад

What make is the rear step..

@BradshawJoinery 11 месяцев назад

amzn.to/3sP95D1 it's this one

@conradsmith7752 6 месяцев назад

I want to do my van out like that, but I would be tempted to leave everything in it rather than having to drag it all indoors each day because of scumbags out there

@BradshawJoinery 6 месяцев назад

Make some steel lockable fronts for it maybe