1. Put the rear brake calipers into "service mode" in the manual method.
-Put the gear into Neutral or P.
-Turn ignition on with engine off.
-Press brake pedal 5-6 times until servo vaccum is empty.
-Press the brake pedal and the park brake switch down for approx. 15 seconds until the orange service lamp flashes.
-Keep brake pedal depressed, release and re-press the parkbrake switch for approx. 5 secs until the orange service light goes off.
-Release the parkbrake switch and brake pedal simultaneously, the orange service lamp begins to flash and the rear calipers drives in.
The rear calipers should now be in service mode allowing the pads to be replaced.
Service- Lights keeps on.
Note: the caliper pistons must not be wound in but can be pushed back with hands!
2. Turn-Off service-mode
-Put the gear into neutral or P.
-Turn ignition on with engine off.
-Pull the parkbrake switch and press the brake pedal simultaneously until the orange service light goes off and the rear caliper drives out.
Viel Spaß und vielen Dank für Zuschauen.
Thx for watching ✌🏻✌🏻
#YigitSoylu #AstraK #Opel
14 апр 2020
