Тёмный

Vehicle Bose Amplifier Bypass 

Amundred
Подписаться 2,5 тыс.
Просмотров 17 тыс.
50% 1

SUBSCRIBER GOAL:
||||||||||||||| 70% |||||||........ 2.12K/3K
This is the updated video - my first one I messed up and the way that I did the bypass was not correct. I will explain the correct way in this one!
Cadillac CTS Bose factory amplifier bypass! I show how to completely bypass the factory Bose amplifier in your non-navigation 2008 - 2013 Cadillac CTS and include links for files for both Navigation and Non-Navigation Bose amplifiers!
Link to Wiring Diagrams:
File in pdf or docx: / discord
Parts and Tools Used in video:
Alpine ILX-W650 Head Unit: amzn.to/3mNR9pm
Alpine KTA-450 4 channel amp: amzn.to/3YFEhP5
Front Door/Dash Speakers: amzn.to/3ZFkcdi
Rear Door Speakers: amzn.to/42hVW2C
Work Light: amzn.to/3KCQqBl
Wire Strippers: amzn.to/3Z2c7OX
Heat Shrink Butt Connector Kit: amzn.to/3TbGPDF
Body Panel Tool Kit: amzn.to/3mOcNcN
Torch Kit: amzn.to/3ZIrywD
3M Super 33+ Electrical Tape: amzn.to/3l88E37
Recording Equipment:
Recorded on GoPro Hero 10: amzn.to/3EENKy4
Microphone Rhode Wireless Go II: amzn.to/3PqOgDZ
GoPro Media Mod: amzn.to/3l4PTdo
Would you like to donate to the channel?
www.paypal.com/paypalme/kyled...
NEWEST SUBSCRIBER! Thank you @Brenda Martin
Subscribe here:
vod.strms.net/s/UCVrmTOz00jTC...
Latest Video:
Mike Tyson vs Jake Paul Prediction - • Mike Tyson vs Jake Pau...
27 Views - Mar 25, 2024
Subscriber Goal:
||||||||||||||| 70% |||||||........ 2.12K/3K
Need tools? Click here! shorturl.at/GIOU8

Авто/Мото

Опубликовано:

 

14 мар 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 54   
@manicmods
@manicmods 11 месяцев назад
Nicely done💪 I just released a Universal Connection Guide for the Metra kit in CTS (including the "impossible" wagon install!) I linked your video in description for folks looking to bypass their stock amps. Thank you!
@Amundred
@Amundred 11 месяцев назад
Thanks for stopping by! I think it's awesome that you put together a connection guide and appreciate you linking to my vid! I can add a link to your guide if you send it to me!
@OneWorthwhile
@OneWorthwhile Год назад
Just gained a subscriber
@Amundred
@Amundred Год назад
Thank you!!! 🥰
@darnellwillis4450
@darnellwillis4450 3 месяца назад
Thanks, couldn't find my amp nowhere
@Amundred
@Amundred 3 месяца назад
You are welcome! Thank you.for watching and commenting!
@mrdeanv4414
@mrdeanv4414 Год назад
Howdy... as always a great video and very informative 👍🏻 I have a 07 Ext Escalade and I was hoping you can tell me where is the Ignition Relay...
@Amundred
@Amundred Год назад
Thank you! This is the first video that I had to go back and update after messing up something! 😂 I believe it is in the underhood fuse block labeled "Run/Crank" www.autogenius.info/wp-content/uploads/2016/10/Cadillac-escalade-mk3-fuse-box-engine-compartment.jpg
@mrdeanv4414
@mrdeanv4414 Год назад
Thank you very much... I thought that might be it but I was looking for the label (Ignition Relay)
@KandD08
@KandD08 Месяц назад
A CTS and a C4. Had that same duo at one point
@Amundred
@Amundred Месяц назад
It is definitely a cool combo 👍
@Trentcracraft-ty2wr
@Trentcracraft-ty2wr 3 месяца назад
I'm curious. Did installing the aftermarket amp make all the chimes louder?
@Amundred
@Amundred 3 месяца назад
Not that I noticed...but it could have and I just did not notice as well 🤷
@idfront1
@idfront1 Год назад
Planning to add a DSP and amp to my 2012, should I take the input to the Bose amp and feed that into the DSP? Or take the output from the Bose amp, feed that into the DSP (fix the delays, re-EQ everything), then out to my aftermarket amp and back into the other side of the outputs from the Bose amp back to the front speakers? The goal is to use a 5 channel amp to power front door speakers + dash speakers + a new subwoofer. Retaining the factory head unit, has the navigation + hard drive. Thanks.
@Amundred
@Amundred Год назад
Are you replacing the factory head unit? If yes, then run wires to the DSP and then you could use the inputs to the Bose amp (temporarily). I would recommend doing the DSP and amplifier at the same time AND replacing the head unit if you have not done so already. I would then run the output from the aftermarket head unit to the DSP and then send the signal to the amplifier. Use the amp outputs to output wires from the Bose amp. Do not even mess with the input side of the amp since you will be bypassing it with a DSP and amp anyway.
@idfront1
@idfront1 Год назад
@@Amundred retaining the factory head unit, unfortunately! If I was getting rid of the factory head unit it would make life simpler for sure. I could just take the outputs from the Bose amp --> into the DSP --> make any changes in the DSP --> Out to aftermarket amplifier --> back to cut output wires and to speakers
@Amundred
@Amundred Год назад
@@idfront1 the issue that you may run into is that the Bose system has a DSP "built in" and this could cause some sound quality issues.
@idfront1
@idfront1 Год назад
@@Amundred I wonder if I can find where the Bose DSP is located, I know it used to be part of the amp itself, not sure if it still is. That's where I was thinking of grabbing the signal at the Bose inputs. Makes the install in my Volvo seem simple - Add a Helix SDMI25 to the MOST interface, done.
@Amundred
@Amundred Год назад
@@idfront1 yeah...this Bose system is a pain to deal with! The issue with the inputs to the amp on the CTS is that they are low level inputs that I ran into was that there was static when using them as the input to the aftermarket amplifier. I am not sure what caused this issue...it is possible that it was the aftermarket door chime box that is a part of the Metra kit. You could definitely attempt to use the inputs that you asked about and see if you have the same issue or not... definitely let me know either way as I am very curious!
@OneWorthwhile
@OneWorthwhile Год назад
Will this work for an ATS as well?
@Amundred
@Amundred Год назад
You would probably want to find a wiring diagram to double check the wires, but yeah, it would be a very similar process!
@jsfkmm
@jsfkmm Год назад
I'm just curious about the subwoofer in the trunk. Do u happen to know if their is a wireing harness u can get to switch it to an aftermarket subwoofer
@Amundred
@Amundred Год назад
You can use a line out converter to get remote and low level output (RCA output) to install an aftermarket sub and amp: Here are some different options: Basic: amzn.to/3z80viA Advanced: amzn.to/3JLQZqd Lots of options: amzn.to/3LT5fQG There are a wide variety of options available, depending on what you want for features.
@jsfkmm
@jsfkmm Год назад
@Amundred im just trying to switch the sub but their is a harness on it and not sure y its their i dont see any pos and neg wires to it like a normal sub would have. I know for most vehicles its just the pos and neg though
@Amundred
@Amundred Год назад
@@jsfkmm ah...I am not sure if there is an adapter harness. Most likely you would need to cut the wires and then connect them to the aftermarket sub. The wiring going to the sub should be: Light Green (-) Blue/white (+)
@jsfkmm
@jsfkmm Год назад
@@Amundred their are 5 different colors red/white,blue/white,green/black,black and looks like orange or yellow
@Amundred
@Amundred Год назад
@@jsfkmm do you have the navigation unit in the dash?
@rthrbfshnw44
@rthrbfshnw44 11 месяцев назад
Morning, I tried to use your wiring diagram and it won't come up. I tried using a 9 conductor speaker wire and wire Alpine 650 directly and now no sound...
@Amundred
@Amundred 11 месяцев назад
discord.com/channels/671578446245265424/1084276779277111427 There should be files listed there. There were two options for the factory stereo With or without the Navigation (UQS and UQA) You will need the wire schematic for the stereo that was factory in your car
@Lahotboy2024
@Lahotboy2024 6 месяцев назад
So we will need to re run all speaker wires? I think I’ll just stick to the factory amp
@Amundred
@Amundred 6 месяцев назад
Yes, unfortunately there will need to be a run of wire to bypass the amp completely. The main reason I did this was that the factory amp was failing in the vehicle so it had to be done anyway.
@Lahotboy2024
@Lahotboy2024 6 месяцев назад
@@Amundredo ok thanks for your videos !!
@Amundred
@Amundred 6 месяцев назад
@@Lahotboy2024 you are welcome and thanks for watching!
@user-wx2gr4hy2g
@user-wx2gr4hy2g Год назад
You keep deleting my advice which could help others why would you do that let me tell them the harness that’s works PAC aph gmo2 harmesss 08-13 CT’s Bose amp Don’t be selfish
@rikorothschild6955
@rikorothschild6955 6 месяцев назад
Bro, you did not have to do all that
Далее
How to bypass your factory amplifier
7:38
Просмотров 573 тыс.
МОЙ НОВЫЙ ДОМ
1:01:04
Просмотров 2,1 млн
УРА! Я КУПИЛ МЕЧТУ 😃
00:11
Просмотров 760 тыс.
Старый Дим Димыч вернулся😱
00:16
Easy Factory Amp Bypass 2002 Chevy Tahoe GMC Yukon
20:43
Adding Subwoofer to Factory Radio - Easy & Cheap!
17:05
▶️Losing Oil GM 3.6 How To FIX🔧
14:11
Просмотров 151 тыс.
Bypass the Bose Amp in a Nissan For Better Sound
10:43
Car amplifier wiring instructional
17:22
Просмотров 67 тыс.
How To Install Aftermarket Amp In 2008 CTS
4:50
Просмотров 30 тыс.
2000-2006 GM Factory amp bypass the easy way
14:38
Просмотров 188 тыс.
Суперкар DS на 1400 л.с.
0:46
Просмотров 1,2 млн
Суперкар DS на 1400 л.с.
0:46
Просмотров 1,2 млн