for. tv software. or tv box android firmware. or radio code. or more. go here repairalltv.com/ how to remove radio code. you can download tv software. EEPROM radio and many more
Another great instructional video, My customer has a Sharp LED LCD TV LC-50Q7000U (2018) model basic smart tv with the same problem - cover pins 1thru 8 with electrical tape does the job every time 😎- language has no barrier in understanding electronic AC/DC principles 👍🏼 Thanks again my Brother from another Mother!
What the heck how the crap does that work? Why wouldn’t that part be covered from the factory on every TV. I’m no TV repair expert but this seems fishy.
It will work but not all the time. Also, there is no settings on factory mode to fix it because it is a hardware issue. And if there happens to be, you still cannot adjust it because the factory mode OSD won't pop up.
Guerreiro caso o amigo esteja querendo salva a TV de uso próprio e economizar SHOW, RECOMENDO, porém caso seja um técnico iniciante com pouca experiência e pegou aparelho de cliente, não tente, infelizmente em 95% casos o televisor apresentara defeitos em menos de uma semana.
Think there is a short on the screen and this is blocking one side of that circuit, preventing the short from completing. Usually this takes trial and error blocking different sections of the ribbon cable to find the bad section.
Although ultimately the tv still has a short - and a potential fire risk but yes it works - I have a Hisense 50” doing the same but I’ll scrap it as I’ve ordered a new tv with 2.1 hdmi - but nice video m8
Hello, do you have a good idea for how to remove a philips tvc screen that is glued. I just broke a Philips TV 50pus screen, it was very firmly glued and used a plastic card to free the glue. There was a corner very difficult. The result is the screen is broken. Do you have a really good idea for how to peel off a firmly glued TV screen without it being damaged. Many thanks for your help.
Pershendetje zotri nje pyetje nqse me lejohet kur hoqe tenien e pare pame nga nje krahe e bardhe dhe tjetra e zeze dhe kur hoqe te dyten po e njejta gje por e kunderta ku kuptohet qe fain e kishte e dyta dhe ku mund te vendosesh tenien faleminderit
so did the trick with the tape,worked perfectly,however after about an hour the picture is overtaken by another picture,while its on in the background and then its on a loop every 30-45 seconds.any ideas???????????????????
I had the same problem with my toshiba 55L5550EE. I followed your advice, and the image reappears. But I have a single thick vertical white line on the right side of the screen. 8cm from the right edge of the screen. I ask for your help. Thanks a lot.
@@khalkhal2372 I guess these pins caused a short and error in tcon board. When covered they dont make contact with tcon board so no short (or fault) detected.
@@pascalphase2556 Well, it’s a common fix. Many video’s on this topic. It bypasses the clocksignal to the panel. But i’m not shure what causes the fault.
