Vertical Stainless Stick Welding

Подписаться 1 млн

Просмотров 170 тыс.

50% 1

VISIT OUR WEBSITE: www.weld.com
FOLLOW US ON INSTAGRAM: / welddotcom
JOIN THE FACEBOOK GROUP - / welddotcom
Talk with Bob, Jason and Mancub!
------------------------------------------------
EQUIPMENT WE LIKE AND USE IN THE SHOP:
WEILER ABRASIVES: weilercorp.com
SELECT ARC WIRE: www.select-arc.com
PFERD ABRASIVES: www.pferdusa.com
ESAB POWER SOURCES: www.ESAB.com
EVERLAST POWER SOURCES: www.everlastgenerators.com
AHP POWER SOURCES: www.ahp.com
TAB AND SLOT WELDING TABLES: www.tabandslot.com
VIDEO SCHEDULE:
MONDAY @ 5:30 PM ET
WEDNESDAY @ 5:30 PM ET
FRIDAY @ 5:30 PM ET
Weld.com is a dedicated to helping you build your career as a welder / fabricator. Whether you’re a hobbyist, student or active in the trade; we are here to help further your craft. If you want to keep learning and interacting with us, make sure you hit that subscribe and notify (bell) button. Join us in the comment section after each video. If you have questions on projects or tests you’re doing now, head over to the Facebook group so you can share pictures with us and get feedback from the community.
FACEBOOK GROUP - / welddotcom
#welddotcom
Disclaimer: Weld.com is compensated for providing links in our descriptions. However, we only work with companies that we use ourselves and can honestly and ethically recommend to our audience.

Опубликовано:

8 авг 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 241

@jacklandismcgowan1413 5 лет назад

Half day is 12 hours...can’t tell you how many times I heard on Saturday...lol . Good video

@mrjodoe 4 года назад

1:24 - very funny :D

@jeremyhanna3852 5 лет назад

Be careful when that slag starts cooling it pops off there like little bullets shots right at you

@Mentorcase 5 лет назад

Especially on the outside of pipe yeeeeouch, and they stick to skin like siht to a blanket.

@jeremyhanna3852 5 лет назад

For me seems to have blastic eye tracking system (gets right in my eye )

@Mentorcase 5 лет назад

Oh yes they love sticking to eyelids.

@waikikin 5 лет назад

Yep- never trust staino slag!

@carolshawol6699 4 года назад

Yeah that shit stays hot for a long time to

@billmasters9488 3 года назад

I got thrown into stainless 3g 2 weeks ago, I had to watch this video on break and it helped immensely. I picked it up in a matter of hours but I was skilled with 7018 and other rods/processes previously. End of day 2 there was a crowd gathered around my weld with a head pointing at it and everyone getting in there and eyeing it with props given. Overhead is a whole DIFFERENT animal from there! I need advice on that, do another video if the price of steel ever comes back down and keep welding brother, thanks a bunch! IWL8

@ethanthomas7373 Год назад

Overhead 309 stainless is about the same as 7018 just favor your top piece more IW597

@serviceoverself2375 4 года назад

I want to personally thank you for this video on stainless vertical up. I have never welded stainless steel before and I was told last week Friday that I need to test for stainless steel and carbon mix weld (dissimilar metal) on Tuesday and I was at a totally lost. Well the short of the story is this, you saved the day. I watched this video and I was able to pass the test in one shot. I could hear you throughout the test - 1 2 1 2 1 2. Worked like a charm. Thanks man, you now have brother in Canada👍.

@johnschmidt2964 3 года назад

If you really have a test do not use this guys techniques for welding. Seriously.

@video4sissies 5 лет назад

Your cut scenes are goofy and great. Still has the educational substance there. Appreciate your work and sharing your work with the world. Keep it up. And keep that beard safe.

@GodslilRedneck23 5 лет назад

video4sissies thanks, I appreciate your support.

@kristianskov4841 5 лет назад

I think it's a genuine safety beard, an a rare one. They are hard to find in red...or so I heard....😁

@GodslilRedneck23 5 лет назад

Kristian Skov very rare indeed.

@ronnieholloway9109 5 лет назад

Great video how’s Bob doing?

@jeremywatterson9594 5 лет назад

Gotta love that stainless, I've ran alot of stainless short arc and fluxcore and that puddle just ain't the same . Like you said it's a whole other beast

@Portarius1984 5 лет назад

I trust a fart more than I trust a stainless puddle.

@kenbrownlee4170 5 лет назад

I appreciate you covering this topic Jason I have to weld vertical lifting pad eyes on big magnese wear steel parts for crushers in a quarry and my welds would always come out like turkey turds I did not know what I was doing wrong or right this definitely helps a tremendous amount . Keep the great videos coming and please keep us posted on Bob

@GodslilRedneck23 5 лет назад

Ken Brownlee thanks man, hope it helps. Bob will be back soon.

@d777b 5 лет назад

WELDING COMEDY AT IT'S BEST!! - - & YOU KNOW WHAT YOUR DOING ON TOP OF THAT!! - - EDUCATIONAL & ENTERTAINING!! - - BY CHANCE ARE YOU RELATED TO 'RED' SKELTON?? LMFAO!!

@GodslilRedneck23 5 лет назад

Nope but I’m a big fan of his work.

@CajunGreenMan 5 лет назад

Yes, you could make a living doing stand up!

@GodslilRedneck23 5 лет назад

Peace Love thanks maybe I’ll give it a try.

@d_t_8__102 5 лет назад

Can you make a video on running 309L on ss pipe to mild steel uphill. That was a tough one for me.

@jeremymatthews5169 5 лет назад

bob moffatt ever coming back?

@GraduatedIn 5 лет назад

yeah sometime during fall he said

@Welddotcom 5 лет назад

Should be early fall

@edwardkawecki8101 5 лет назад

Hope it's soon!

@G5Hohn 4 месяца назад

I actually like the new blood.

@lanreakerele4375 4 года назад

Thank you. I have learnt something new about vertical weld in stick welding from you. Good Teacher!!!🙂👍🏾

@pierroalino 4 года назад

Juste à quick thank you from France. I tried to learn stainless rod on my own and it gave me nightmares. I couldn't read or understand the puddle, took me half a day (same half as your boss XD) to start to understand it. I am getting little better weld after weld. So thanks for the video and the sharing. Keep it up.

@donnywhite13 2 года назад

I've done a triangle method for the first 3 then do half timing of one second sweeps side to side with half the upward travel speed. It leaves a tighter profile and it works for me. SS welder for 5 years, 308,309,316 and 2209. Hope it helps and God bless.

@megachad2937 11 месяцев назад

Same

@zkemp1108 5 лет назад

Thank god! This is exactly what I needed! Can you guys do a video on stainless mig welding? I know there's an older one but it doesn't have the quality information that the channel provides nowadays

@Welddotcom 5 лет назад

Sure.

@GodslilRedneck23 5 лет назад

Zachary Kemp it’s been a while but I think we can put something together.

@zkemp1108 5 лет назад

@@GodslilRedneck23 that's awesome. I'm sure for you it doesn't matter how long it's been haha it'll still come out on point!

@GodslilRedneck23 5 лет назад

Zachary Kemp thanks man. I’ll give it a shot.

@Portarius1984 5 лет назад

Yeah we're doing more stainless stick and mig because well, they're difficult and used more and more with natural gas power plants, refinery work and a reemergent steel and aluminum industry. I really like stainless fluxcore, inconel clad welding, and anything aluminum. They don't know but we have inconel now. Things are about to get real.

@1royalwolf 5 лет назад

Cheers for sharing mate. I’ve never seen anyone do a continuous stainless vertical up weld. I do a continuous stop/start if that makes sense. This is a lot quicker though and offers more control. Definitely something I will be practicing. 👍

@GodslilRedneck23 5 лет назад

1royalwolf it makes sense. I’ve done it like that in the past. Keep practicing man, you’ll get it 🤘🔥

@markstevansen542 5 лет назад

I've never used stainless welding rods with my everlast welder. Might be something I need to try.

@AlexA-iu5ku 3 года назад

I’ve welded on many different types of metals using different types of welding processes 14 ua welding certifications brazing and hard facing also thrown in there and I can tell you stainless steel SMAW vertical might be the hardest I’ve run. This is some good info.

@KennyInVegas 2 года назад

Dripping snot? I've gotta try that stuff. I've only GTAW stainless and it's a bit different than mild steel.

@pwmike 5 лет назад

That looks very good.

@tatooguy65 5 лет назад

Good tutorial. Looking forward to a video of welding a schd 20 s/s pipe in a positional weld.

@sakiracadman5673 Год назад

Any opinions on doing vertical up? E308L-15, 16, or 17? There seem to be a lot of issues with being out of position when it comes to -17? Any tips on using it or just concede and go to -15? Thanks,

@sunshineFireIT 5 лет назад

so when do we get to see the finished weld rack, its Friday right?

@Pleebian94 5 лет назад

More Stainless Welding Videos please!

@GodslilRedneck23 5 лет назад

Coming right up 🤘🔥

@joemarrie6143 5 лет назад

Okay thanks for the tips looking forward to 309 stick 3g root-cap

@GodslilRedneck23 5 лет назад

C2TR ran some today for practice. I’m sure we will be able to do a video of it soon.

@joemarrie6143 5 лет назад

@@GodslilRedneck23 im excited for that

@pwmike 5 лет назад

Stainless stick is not easy. 7018 is easy compared to this.

@markfryer9880 5 лет назад

Jason that welding jacket of yours looks good enough to go out on the town in. So do you wear it while you are out on the town?

@GodslilRedneck23 5 лет назад

Mark Fryer Not yet but that’s a good idea.

@austinmcdermott8859 5 лет назад

Love the content👍

@richardsolomon8076 5 лет назад

Cheers Jason, ss arc in 316 I get on very well with, good to see different techniques, how's about a bit of stick Ali welding we call em seagull crap rods :-) any tips on getting a nice finish?

@lauroabad7891 3 года назад

sir What kind of Electrode is the best for performing rootpass in plate or pipe welding

@Db-pq7zw 4 года назад

Do you need to keep stainless steel rods in an oven? RA330, 304L?

@Kevin.L_ 5 лет назад

That looks like fun! Never ran any stainless stick.

@GodslilRedneck23 5 лет назад

Kevin Lee it’s definitely a challenge.

@bryandepiazzy8769 5 лет назад

I tried welding stainless many times. 304L pipe with 309L16 stainless rods could never get the puddle to work. Always favored one side resorted to welding with 7018

@gonzosweldinginc2922 5 лет назад

Great video as always. Thanks for the info. I’m having cracking when I weld carbon steel to stainless steel. Do you think you can do a video on that with 309L 15, 16, 17. Thanks.

@Welddotcom 5 лет назад

Make sure to tune in next Friday... It's already shot, just needs edited.

@GodslilRedneck23 5 лет назад

Anthony Gonzalez coming right up.

@gonzosweldinginc2922 5 лет назад

Hell yeah you guys rock!

@robseward7496 5 лет назад

Hey good skills there red stainless vert is not easy we run them a little on ac over this side of the pond

@leebarnhart9725 5 лет назад

Watch that slag with stainless. It will pop off and fly 4-5 foot as it cools but it will be hot enough to burn the pee out of you. Scars to prove it! I found myself holding my shirt collar shut and backing up slowly out of habit while watching this excellent video. Going to hit the like button after that bead cools down a bit.

@flyingnorseman 5 лет назад

He made that look easy. Thin stainless tubing (304L - 065) project I did took me 3 times longer than expected and scared me off the stuff. Not the cheapest stuff to screw up. I would love to see you guys do a SMAW video on something similar.

@GodslilRedneck23 5 лет назад

paul norris what diameter did you use? I had to do some thin wall hydraulic fittings when I was in Kuwait, they turned out pretty decent.

@flyingnorseman 5 лет назад

@@GodslilRedneck23 1/16 & 3/32 309L electrodes. Had a few nasty blowouts. Wasn't structural or food grade so I ground and filled.

@GodslilRedneck23 5 лет назад

paul norris 1/16 should work. Just drop the amps and move quick.

@flyingnorseman 5 лет назад

@@GodslilRedneck23 That ended up being the most used electrode. It laid a thin bead but worked with very tight fitup. I did have blowout issues using it on outside corner of 2, 45's and had to weld less than an inch per pass everywhere. The 3/32 worked better if the fit wasn't perfect or filling in blowouts.

@LextechLighting 5 лет назад

I have a can of 308L stainless rods. I have found they remind me of 7024 in the way they run smoothly (consistent arc) and build up (they love to build up). Very similar also to MG500 as well, though the MG500 is easy to get worm tracks, unlike the stainless 308L. Stainless has it’s own rules for sure. Like how you said let the slag cool. Most people are like whatever I’ll chip it when I’m done, it chips fine..... uh yeah that’s not why you wait. “Why is is blue and purple “. I dunno, chipper.

@GodslilRedneck23 5 лет назад

Lextech Lighting 😂

@rossfriedman6056 8 месяцев назад

man I love this video!

@iand720 5 лет назад

Ive used stainless 308 rods to weld tempered steel , the procedure sheet specifies running them way cold and a rod angle of 90 degrees, stringer beads and NO manipulation. If you didnt grind every toe then you would 100% get an inclusion. I would like to see you do a 3F and 4F with a 316L17 rod, those are rough. Great stuff i look forward to the 309 video ive never used them should be interesting

@someone6u6dont6no 7 месяцев назад

Fuck I gotta do a bunch of 316l 17

@daskiier 5 лет назад

How about think wall cuni socket welds with tig?

@Mamuuy12345 5 месяцев назад

Will this work with a 3mm stainless steel plate?.. planning on using 2mm welding rod..... I'm afraid i might blow a hole in it.. its a water tank for fire tanks

@tylerhawley6350 3 года назад

What’s the difference between 308 and 309 stainless? And how would you do a vertical butt weld? I’m having trouble

@kelvinzondo2265 3 года назад

Dat looks fantastic

@markwilson4099 4 года назад

good video, and great humor!

@warrenjones744 5 лет назад

That was very informative Jason. Now try a welding a 1/4" thick plate to 10 Ga sheet vertical up, not burn through and get a nice bead profile using 3/32 electrode. Easy to do with mild steel and 7018 not so with stainless if find.

@donnywhite13 2 года назад

55 amps and run 🏃‍♂️ with it. Works for me.

@MAC_6.7 3 года назад

Great video I’m always a year or two behind on the good ones

@rmh_223 4 года назад

Do you guys use a singles HD for the camera?

@bossygold5330 7 месяцев назад

What’s a good arc force for vertical stainless weld?

@geanmottaesteves2006 7 месяцев назад

I will try to do this technique, thank you for the video. God bless you 🙏🙏🙏

@goosseperformance1444 4 года назад

what type of gas did you use?

@5406jake 3 года назад

Please mate what camera do u use for your weld shots

@evilgrin123 5 лет назад

What was the stainless steel grade? And what was stick electrode was used. Very good video as always!

@davetruther31 5 лет назад

309

@mhansl 3 года назад

Jason, any difference welding 316?

@xESPplayer500x 2 года назад

I trust the puddles I make on 304 but I dont do vertical. Is that an exception?

@weldernotmechanic8588 3 года назад

That puddle stresses me out. Got a boiler to repair tomorrow morning it’s been awhile for I welded stainless. Thanks!

@PeakyBlinder 3 года назад

How can you tell what grade of stainless steel you have,

@micboobadan 5 лет назад

Is the electrode a -15 or -16?

@Steve_Just_Steve 5 лет назад

Anther good one Jason. Seems like the editor used to put rod size and amperage up on the screen when either one was mentioned. Maybe I'm think of different channel, but regardless I always find it very helpful, many times they are mentioned in different parts of the vid which makes if hard to equate them. Anyway, thx for vid. You da man!

@GodslilRedneck23 5 лет назад

Steve just Steve we did a close up of the machine when we dialed it in.

@robertcombs1518 4 года назад

I 've welded lots of ss.. On vertical use upside down cresent moon shape ...create your shelf first... Then walk the puddle up using the moon shape..but most important........go faster through the middle cutting your bead which will flatten the puddle!!!!!!! Good luck!!!!!

@petascalecomputing 2 года назад

-thank you so much!!

@phillipchambers8487 5 лет назад

Awesome Video on Stainless Stick. Not a lot of people even think about "Sticking" Stainless. I like it on the bigger/thicker stuff, but when it comes to the smaller stuff, I'm gonna Tig it. Enjoyed this though.. because the 1st time I ever tried to stick Stainless on a Vertical, I was beating my head against the wall, because of exactly what you said. "You cannot trust the story of a Stainless Puddle when stick welding" Keep up the good work, and you Guys need to start selling Cantesco Ceramic Anti Spatter on your website, because the only way I can find it anywhere is buy the case. It's expensive as hell like that. I'm sure in the log run its cheaper, but it would take me a while to run thru an entire case of it. I would be down for about 2 cans a month if you Guys would start selling it. I will even Market it for you to all my Welding Buddies so they will buy it from you as well.

@Welddotcom 5 лет назад

I think it has something to do with packaging aerosols, but I will forward that along for sure 👍👍

@GodslilRedneck23 5 лет назад

Phillip Chambers yeah that puddle lies like a rug 😂.

@victoryfirst2878 3 года назад

Very well stated fella about the vertical weld appearance. I personally call the look a ZARRO WELD. Just my personal two cents !!!!!!!

@johnw391 5 лет назад

Remember my first time they said it runs just like 7018. In short order I figured out fast it did not and I was welding cut thurs for pipe inserts

@GodslilRedneck23 5 лет назад

Jonathan Watts yeah, it’s completely different than 7018 and it’ll get away on you quick if you let it.

@johnw391 5 лет назад

@@GodslilRedneck23 plus I think it 1/16 and 3/32 309. Much rather flux core stainless

@nateslotiuk2247 Год назад

The very basic was not discussed. Which designation electrode did you use.? There's 15,16,17 15 is all position Advise what to use and the differences.

@lsellclumanetsolarenergyll5071 5 лет назад

Nice job. I learned something again. Hey can you guys do a video for me about Casting welding by chance? Automotive Casting for example what is the best way to fix a broken cast and what to look for in order to know which filler to use for what and what the limits are.

@zkemp1108 5 лет назад

The welding tips and tricks podcast has a segment that's all about welding cast aluminum (and one on cast iron too) that's filled to the brim with info

@GodslilRedneck23 5 лет назад

LSE LLC (Lumanet Solar Energy LLC) I’ll see what I can do.

@lsellclumanetsolarenergyll5071 5 лет назад

Jason Becker hey by the way my name is Olaf Becker. I know it is a tricky item but I am certain a lot of people have the same issue out in the field. Bronze does a nice job but on a Car knuckle for example it is way to weak to be used. Just to give you a nice example.

@lsellclumanetsolarenergyll5071 5 лет назад

Zachary Kemp can you shoot me the link for it by chance? Obecker@lumanet.info

@zkemp1108 5 лет назад

@@lsellclumanetsolarenergyll5071 I don't have a link for it, I just listen to the podcast on spotify

@kokudo8389 2 года назад

am looking for stainless steel e312

@CHEESEMAN88 2 месяца назад

Thanks brother

@Mentorcase 5 лет назад

I learnt mancub taught you something!

@johnnyt6508 2 года назад

I only work with 309/316/317 you have to take a little longer break . I do around 2,5 sticks on 80 mm

@viorelscrob6391 2 года назад

To me the weld it flows down , i do not know why?

@farmalltomf 5 лет назад

Good info and suggestions. I hate welding SS any thing (although TIG may change my mind as I learn it). This is the type of content that truly helps. BTW, Cub's smile was way too big with those gloves on...………………………………….

@sefaucon3839 5 лет назад

Hi , question for you if i may asked I am a beginner and now everything is confuse in my head about types of welding rods Eventhough i have read on the web everywhere i stil don't get a straigh answer I would like to know a chart with type of work and type of rod that's it from knowledegeable person Clean cut answer , no amperage or voltage ( this i can get it ) I got comments like , ya you can use this but also use that etc . nothing direct and specific Experience will show me later on Thanks in advance Serge ( from Mtl )

@calebbodiford5913 3 года назад

Best description of the metal and rob behavior

@williebateman3613 5 лет назад

Nice 💥

@daniele3275 5 лет назад

When we will see Bob back?

@Welddotcom 5 лет назад

Should be in the early fall time.

@joshblack1406 4 года назад

Thanks for the tips. I'm in a welding class for my job and i was doing great and loving it until he brought out this 309 shit. I'm horrible at it and getting extremely frustrated so all these kinda vids help.

@rmh_223 4 года назад

Currently in the process of getting certified for this bullshit process lol. Many people have told me to long arc and drag in vertical. Is this normal for ss stick? It sounds like the exact opposite of what I should be doing.

@jameselderton9869 5 лет назад

Man Cub looked a bit too excited when he pulled that glove on! 😱

@GodslilRedneck23 5 лет назад

James Elderton yeah I was a bit scared 😂

@cameronmurdoch7353 5 лет назад

Where's Bob

@southsportsoutdoors7522 5 лет назад

Cameron Murdoch he’s house had storm damage so he went to work on it for a bit. He will be back he said.

@garyteague4480 5 лет назад

How about 316L vertical?

@miquelanesto1762 4 года назад

Said it before and will say it again if you want to practice s.steel use one of those Chinese 6013 electrodes, get it right with those crap rods then move on to good stuff. Good video you are a great teacher.

@ssjsned4419 5 лет назад

Make a video on gen welders would be great alot of fellas learn or test on digital inverters then hop on a sae200-400etc. maybe a vid on welders with gears. another on sae 300 settings and mabe then 400 with the different job selector. understanding arc force with old machines. Theres a fella here on utube named "Fieldres" with a vid "Amperage & Voltage on Welding" that goes into it but i thought it would be great to get Bob,Cub,Beard and the Camera Guys take on it. thanks keep on welding.

@RaviKumar-sh 3 года назад

Nice

@NSW 5 лет назад

Hat's off! I think you did great. stainless stick is very unforgiving.

@user-yz1vt6zv7n 5 лет назад

Yo!!!, I haven't seen you in a while. I'm gonna travel to Sweden (the northern part) in September and going to work there. Just wanted to ask you for some tips. Would it be possible to contact you directly?

@GodslilRedneck23 5 лет назад

Northern Sweden Welding thanks man that means a lot coming from you. I’ve seen your work 🤘🔥

@Bigknucklesandhands 4 года назад

I actually like running stainless uphill......but I preheat mine so I know the moisture is completely gone

@gupalbora2943 3 года назад

Sir ples3g open rot still..

@Andrei_K1G1K 3 месяца назад

I'd really love to see someone welding a thin exhaust type pipe with a 1/16th rod.

@kyleclark1479 Год назад

Why not use MIG?

@warrenzausa3145 5 лет назад

Nice beard

@GodslilRedneck23 5 лет назад

Warren Zausa thanks man.

@warrenzausa3145 5 лет назад

@@GodslilRedneck23 your welcome sir! Learning many things from you guys ☺

@ieaEH 5 лет назад

Haha I just had me some Taco bell after an 18 pack I will be wide awake soon!!!

@ryanmurray3598 5 лет назад

Do vertical with 312. Theres a tricky one if you've not done it!

@jamesyoung_photoghraphy1015 5 лет назад

308 and 309 stick rod are like 7018 after smoking a bowl

@rjw7058 3 года назад

almost like trying to weld 5/16 lo-hi, gonna get some droops in the center, if u were doing this on a s/s bulhead, they mite be better appearing beads, well done on a test plate>

@sumilidero 5 лет назад

I'm a kind of guy who freaks out seeing slag, so doctor told me to mig-weld everything! Works fine :D

@D300zxTT 3 года назад

😂😂 love the content

@JPZ92 5 лет назад

😂😂 great video!

@GodslilRedneck23 5 лет назад

Jennier Perez thanks man, hope you’re doing well.

@JPZ92 5 лет назад

Jason Becker thanks! Start a welding job at the end of the month. All is well 👍

@GodslilRedneck23 5 лет назад

Jennier Perez congratulations man, that’s awesome.

@codbeastmode1233 4 года назад

Do one 309 on a monster coupon 6g

@brlazla 3 года назад

I've heard legends of a technique called 'overheard welding'

@justinmcwaters4962 5 лет назад

Dude, it welds exactly like flux core stainless wire. When you start your puddle and get your foundation started, just quickly weave without pausing. Don't travel up very much at all on your weave. Just make several passes and it will lay in so beautiful without undercut on the sides and no droop. Consistency on your travel speed and width of your weave is the only trick of stick and flux core.