VESC Tool Mobile iOS Walkthrough of Features 

I didn't realize all the bolts in my motor were loose and that was the clunking noise during detection.... DOH!

Hello, I have a question for us Vesc Tool on the iPhone and when I enter the settings, whether it is motors or remote control and I want to slightly change something to 1 vesc and I want to switch to 2 vesc, it happens that the connection automatically disconnects. Do you have it too?

Hey thanks great vid. Is there a way to change the remote throttle mapping on the app without doing the set up procedure all over again?

Hi, I have an iPhone 12 pro + vesc tool + a tramp skateboard, I have problems with the application, namely it loads everything nicely, but if I sit a bit in the board settings in the application, the connection is interrupted from the machine and I have to reconnect. is it normal for apple devices to have problems with vesc tool?

I’ve started into this app and now I cannot operate my board like I was able to do prior which was turn on the remote , power on the board and ride. Now the board does respond to my phone but not the remote. The phone will also respond to the Remote but not the remote to board and I can’t figure out what I did wrong. Can I disconnect the app and go back to how things were prior which was board and remote and that’s it ?

Won’t pair to spintend vesc v1. I can pair to android no issue but hen attempting with vesc it says it can’t read vesc firmware. 😢

Nice summary & App - thank you Jeffery. Can I just check something - when using 2 VESCs linked by CAN, on the RT Data tab does the Current (A) display relate to the one VESC that you have selected or is it total current draw of both? Cheers

Question: While throttling the motors were making these weird noises like stuttering. How can someone fix that?

@Jeffrey Friesen Hello, I have a question, I also have iOS, I updated the firmware and my bms disappeared, and I don't have a battery chart and I can't charge the skateboard, could you help me solve the problem??

How did you connect bms for it ? does it have to be from flipsky or you can connect just any that supoorts uart ?

Is it possible to make VESC Tool for Mac or Windows show MPH/Imperial units like on the IOS App? Thanks!

where can you find a bluetooth module that is compatible with ios? flipsky's option says that it is only compatible with android, thanks!

Can anyone recommend a wireless bluetooth transmitter?

Thank you for the video! Stupid question though... will the app work with the generic BLE modules like the Flipsky?

This is very exciting to see! What IOS versions will it be compatible with? Edit: Nevemind. I now see that it works with iOS 12 and above. 👍

Hello, I have been using VESC TOOL on my iPhone for some time to read the data from my FLIPSKY esc via a Bluetooth module of the same brand and change the CONTROL TYPE parameter in the CFG/PPM APP tab. I did a false manipulation pressed the READ button instead of the WRITE button. Since then, I can no longer use the application because I have a READ FIRMWARE VERSION window that opens whose message is: COULD NOT READ FIRMWARE VERSION. MAKE SURE THAT THE SELECTED PORT REALLY BELONGS TO THE VESC. Do you have a solution to solve this problem? In addition, using a mac, I am looking for a compatible version of VESC TOOL. Seeing on your video that you are also using a mac, could you tell me how to get this version? Warmly

⚡👏🏼👏🏼⚡

🤙🏼🤙🏼🤙🏼

What BMS are you using that supports vesc?

Love your video but I couldn't quite see what you had on your phone what you consider doing this video over on a iPad or a Android tablet and thumbs up on your video sorry and I'm a noob

My prayers have been answered. Yes!!!! whooooohoooooo \m/>.