Тёмный

vespa SIP ROAD 3 | mount, testRIDE & SOUNDcheck | FMP-Solid PASSion | 

FREAKMOPED Vespa Tuning | FMP - SolidPaSSion |
Подписаться 24 тыс.
Просмотров 33 тыс.
50% 1

testride M244 quattrini, mounting & SOUND check, & 50-100kmh compared to polinibox, which one will be faster?
sound is fine, hope it stays like that, as we know that the v2 gets pretty loud (and annoying...)
more pictures of the sr3:
• NEW sip road 3.0 BOX e...
CONCLUSIONs vs polinibox: same same but different! same speed on the road (forget the 0,7s, its not that accurate)
A bit less torque in low rev, but fun factor better reving in higher revs, where the polini gets a bit chewy...
torque lover?
Go for polini box (or lth/tsr box)
original 200 engine?
go for polinibox, as abox which supports the original torque character of this engine, will show bigger effect, (as a reving box, at the original engine will show less effect, logically, as it isnt designed for reving)
Rev lover?
Go for sip road 3
8" and problems with main stand (which u wont/cant solve)? Go for sip road 3.
want to have maximum ground clearance?
go for polini box or a megadella.
Original 200cc engine?
go for polini
you have the sr2?
yes, definitely, buy the sr3, its a HUGE step, way more power. sr2 is pretty boring, compared to sr3
You have a polinibox?
stick to it.
more Videos2come:
- 50-100kmh
- soundcheck vs sr1, sr2, polinibox
- topspeed check
- 4th hill upwards PULLtest
--------------------------------------------------------------------------
FOLLOW me on
insta: @FreakMoPed
fb: / freakmoped
--------------------------------------------------------------------------
like what u see? found good tips?
u can support FMP via PATREON:
/ freakmoped
_____________________________________________
DISCLAIMER: the information shown in this video, is about THIS specific hardware. it is my personal observation documented with this video. It DOESNT automatically mean, that all such parts by this producer or seller do have or will have same issues.
_____________________________________________

Опубликовано:

 

12 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 59   
@JimVanMorrissey
@JimVanMorrissey 4 года назад
Thanks for that comparison with the Polinibox. It's a bit hard to tell from the mic, but how does the Siproad 3 sound compare to the Siproad 2? One thing I really like about the Polini box is how it doesn't have that metallic treble in the exhaust note, like a chainsaw. The Siproad 1 and 2 had that sharpness, whereas the Polinibox sounds more like an original exhaust.
@FreakMoPed8
@FreakMoPed8 4 года назад
Spot on, your description. Soundwise, i would still give polinibox the point. Direct comparison to come!
@FreakMoPed8
@FreakMoPed8 4 года назад
udate: still polinibox in my ears 🙂
@gogogadget5
@gogogadget5 4 года назад
thx for the impressive Vid! current setup T5 172, 24si, 52mm 120/50, original box, cyl 174/124, ex port 67%, peak at 6100 rpm, almost full torque 16,4NM 4200 rpm, changing to 54 stroke now 120/65, expected 20 torque at 4800 on original box. choose SIP 3.0 or Polinibox? my thought ->Polini (better sound/torque) timings change to 177/126 for 6600 peak and 7400 max rev., or take SIP 3?? actually tested BBT: perfect torque curve, peak apprx 6200 rev till 7400, but CRAZY vibrations is a NOGO ;-) thx a lot for commenting :-))
@FreakMoPed8
@FreakMoPed8 4 года назад
bbt way to noisy and manifols too low i would go for polinibox, sr3 has looses a bit in low rev, ads in very high rev. consider bigger blow down, leave transfer as low as possible 176/118/29 is a very good cyl timing and if rv tolerance 0,05mm is provided, extend the intake timings
@gogogadget5
@gogogadget5 4 года назад
@@FreakMoPed8 Wow! thanks indeed for your helpful and prompt reply, much appreciated! I'll try to keep the cyl low and the piston rings alive ;-)
@DJD8RR
@DJD8RR 4 года назад
Merci pour le test 😊👌
@VespaPXTeknik
@VespaPXTeknik 2 года назад
Nice video, thank you.
@bertiedoonerwind8061
@bertiedoonerwind8061 2 года назад
HI Freak, did you install the hydraulic front brake on your T5? If so do you have a vid please?
@FreakMoPed8
@FreakMoPed8 2 года назад
I did. I used the mmw handlebar adaptee back then. But better ones are available now. Checkout mrp, mj9
@leonardomesa8851
@leonardomesa8851 4 года назад
right now i´m using a sr2 but now i want the sr3 !!!
@FreakMoPed8
@FreakMoPed8 4 года назад
its indeed a HUGE step, i prefer the polinibox tough... ;)
@paolodea20777
@paolodea20777 4 года назад
Can you tell me why you use the iron hammer to mount the exaust on an alluminium cylinder?!? Scuse me for my english.
@FreakMoPed8
@FreakMoPed8 4 года назад
Because it was quite narrow BUT consider the quattrini m244 is not a normal cylinder. 127 instead of 110mm conrod, and the exhaust connector is 1mm wider than standard 200cc cylinders
@palemale2501
@palemale2501 3 года назад
I just replaced the great SIP Road 2 with a SIP Road 3 on my PX125 (ex CAT 2015). Cannot get the right jetting and the best is same as the SIP 2 with Air 120, Main 96, Idle 48/100 but have not touched the difficult to access Idle screw. Acceleration is still great, but top speed dropped from max 56mph /90 kmh back down to the original 52mph/82 kmh. Worse is the front tube of the exhaust hangs too low (as seen at start of your video) at 11 cm ground clearance, or 9 cm with my 119 kgs on it - so it scrapes on the road on bumps or cornering !! UPDATE - Front shocker was worn out, and with my weight is maybe why Road 3 was grounding
@FreakMoPed8
@FreakMoPed8 3 года назад
Jop. i know. Too low it hangs sadly. No idea why they didnt consider proper ground clearance. Full speed is not the idle anymore (mainly) the issue is that original 125 is pretty weak (esp for grown ups as us) so its better to first invest in a 177 cylinder. not sure if with jetting ur speed problem will be solveable... u might need a dofferent cyl. Vmc superG ie
@palemale2501
@palemale2501 3 года назад
@@FreakMoPed8 I agree. You will know better than me that the PX125 CAT has been limited with timing and port sizes etc to pass Euro 3. Will just have to buy another SIP Road 2 to get back up to 56 mph max as the SIP3 is being damaged, and is annoying and very embarrassing to scrape the ground all the time.
@FreakMoPed8
@FreakMoPed8 3 года назад
On original 125 engines, box nearlly brings nothing.... (not so on 200cc) its end the end only the no cat effect is my guess. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jVDNTkHzVl4.html
@palemale2501
@palemale2501 3 года назад
DUMPED SIP ROAD 3 - Two serious problems - top speed down, and ground clearance - SO I HAVE GONE BACK TO A SIP ROAD 2 !!!
@FreakMoPed8
@FreakMoPed8 3 года назад
I know. It was very surprising for me too as sr1, sr2 ans sr XL are perfect in respects of ground clearance. The new viper is also too low (and too loud..)
@abdulrahim7531
@abdulrahim7531 4 года назад
Hi FMP, which exhaust do you recommend for a mhr 210 cylinder with matching crankcase with standard crankshaft? sip r3 or the polini box?
@FreakMoPed8
@FreakMoPed8 4 года назад
Polinibox 👍
@TuningVespa
@TuningVespa 4 года назад
Which carb do you use in this video? Have u some gsfdyno test?
@FreakMoPed8
@FreakMoPed8 4 года назад
dellorto phbh 30, yes check out my facebook page, there is a picture folder about it
@FreakMoPed8
@FreakMoPed8 4 года назад
in videos here for instance ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5WmuDy0nDeI.html
@vespavespi
@vespavespi 3 года назад
Hi FMP ..been watching most of your video I have question about this SR3, does this SR3 need MRP adaptor center stand when i use in vespa rally/sprint? As we know polini big box will need MRP center stand adaptor to use in Vespa Rally/sprint
@FreakMoPed8
@FreakMoPed8 3 года назад
Sorry cant help here. If main stand makes problems i simply adjust it, as a good box exhaust has higher priority to me, than an original main stand .
@vespavespi
@vespavespi 3 года назад
@@FreakMoPed8 its okay , thats a good statement of exhaust priority ..thanks for your reply
@malcymal
@malcymal 3 года назад
What engine you running? Sounds amazing and quick
@FreakMoPed8
@FreakMoPed8 3 года назад
M244 reed 😜😁
@FreakMoPed8
@FreakMoPed8 3 года назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CvXSLlggRik.html
@malcymal
@malcymal 3 года назад
131kmh wow 80mph , gets there so quickly too
@FreakMoPed8
@FreakMoPed8 3 года назад
Even with polinibox it makes 140 Its the ingenious quattrini A killer 😜
@danielrazny1250
@danielrazny1250 Год назад
Which is better for PX125 2007 stock engine, Sip Road 2 or 3?
@FreakMoPed8
@FreakMoPed8 Год назад
3
@danielrazny1250
@danielrazny1250 Год назад
@@FreakMoPed8 ok, I think I buy it soon.
@daeng_ipii7474
@daeng_ipii7474 4 года назад
Vespa t5 😘😘😘😍😍😍👍👍👍
@FreakMoPed8
@FreakMoPed8 4 года назад
Actually its a gs, px200gs its called from 1987 😃
@matthewmacdonald409
@matthewmacdonald409 4 года назад
Spanish MotoVespa??
@FreakMoPed8
@FreakMoPed8 4 года назад
no, its a px200gs, a t5 frame with 200cc engine, sold ens of 80ies in middle europe
@matthewmacdonald409
@matthewmacdonald409 4 года назад
Were they made by LML under license or by Piaggio from Italy??
@exsoulagent
@exsoulagent Год назад
@@matthewmacdonald409 piaggio
@andysioannides681
@andysioannides681 3 года назад
I have px125e zamp74100 , i want to replace the exhaust , what do you suggest and what jet *from sipscooter
@FreakMoPed8
@FreakMoPed8 2 года назад
Siproad 3. Mj 2-5 sizes bigger
@andysioannides681
@andysioannides681 2 года назад
@@FreakMoPed8 what size is my stock mJ?
@andysioannides681
@andysioannides681 2 года назад
Bro , i have pinasco alumi 177, 24 carb and sip 3.0 what jett do you sugg ans air?
@FreakMoPed8
@FreakMoPed8 2 года назад
Pnp? Intake timings?
@andysioannides681
@andysioannides681 2 года назад
@@FreakMoPed8 yes bro and what soze of jets
@loftalofta8423
@loftalofta8423 4 года назад
Ciao..Was looking to replace my Sito+ ( PX 2002 / DR177 + 24/24) by a Sip Road 3.0...anyone has idea on how better it would be ( or is it not worth the change).
@FreakMoPed8
@FreakMoPed8 4 года назад
Definitly a step forward yes. Would rather take the polinibox tough
@bisugzzz
@bisugzzz 4 года назад
Which is better? This or polini box?
@FreakMoPed8
@FreakMoPed8 4 года назад
polinibox in my opinion. nicer sound, higher manifold, more torque, the bit more reving of sr3 is only available in 1st and 2nd gear, in 3rd and 4th you dont reach this reving anymore.
@bisugzzz
@bisugzzz 4 года назад
mista FreakMoPed thanks a lot! Will get one by the weekend👍
@BrokenVespaPhil
@BrokenVespaPhil 4 года назад
Hi, great video as always, thank you! I have a question and would be really grateful if you or anyone else could help. I have a px malossi 210 sport (ported) with reed valve and dellorto 30mm phbh carb. I have a pm tuning expansion chamber exhaust and I am getting fed up with it. It really gets in the way of the centre stand and the end can is very, very close to the ground. Would a sip road 3 work with my set up? Would I lose a lot of power? Would I have to reduce any of the jets? Or is there another exhaust that you would recommend for my setup that wouldn’t rub against the centre stand? Is the Polini exhaust better? Thanks in advance for any advice. Phil
@FreakMoPed8
@FreakMoPed8 4 года назад
Polinibox, mj 128, u are gonna love it, you will win torque and over all performance 😃
@BrokenVespaPhil
@BrokenVespaPhil 4 года назад
mista FreakMoPed Thanks for getting back to me so quickly and thank you for the advice. 👍🏼
Далее
Cute
00:16
Просмотров 7 млн
sip road 3 | top speed FAIL! | vespa 244 |
6:34
Просмотров 6 тыс.
Vespa Px 221 Malossi Tuning and Xmax400 Race
5:34
Просмотров 562 тыс.