Veto Pro SB-LD Loadout - My Starting Point

Подписаться 19 тыс.

Просмотров 15 тыс.

50% 1

This is my first Loadout of my Veto Pro SB-LD. I picked this up as the free bag during the 2024 Spring Promotion by buying a MB5B.
You can see my comparison of the SB-LD & the TP-LC Here for more of a Bag Overview - • Veto Pro SB-LD - How i...
This video is more of a “tools in the bag” video. I share in this video how I plan to use the bag, along with the tools and how I have them laid out. I personally think I have it a bit heavy, but I will weed out tools from here.
If you have questions, or just want to let me know what you think... Please Comment. Thanks so much for watching!
The following are links to products you see in the video. I participate as an Amazon Affiliate, so if a link is marked (Affiliate Link) I make a small commission of of your purchase through those links at no cost to you. Thank you for your support!
I am also working on an Amazon Store with list of tools like my favorites, etc. I even have a SB-LD List.
You can check out what I have so far in My Store here - www.amazon.com/shop/morgansma...
Veto Pro SB-LD (Recommend buying from Veto (Non-Affiliate) for Warranty) - vetopropac.com/sb-ld/
Tools Links with Review Links Also:
Klein 8-1 Stubby - (Affiliate Link) amzn.to/34Q9k4z
Review - • Klein Tools Multi-Bit ...
Knipex Forged Wire Stripper 13 72 8 (Affiliate Link) - amzn.to/3Kk9EJb
Review - • Knipex Forged Wire Str...
ICON Flex Ratchet (Non-Affiliate Link) - www.harborfreight.com/locking...
Review - • ICON - 1/4" Locking Fl...
Railer BitRail (Affiliate Link) - amzn.to/3KjZ7Or
Video Here - • Railer Bitrails - Perf...
Railer Magmat (Affiliate Link) -
Video Here - • Railer MagMat Strap - ...
M12 Installation Driver (Affiliate Link) - amzn.to/3bVPE3d
Review - • Milwaukee M12 Fuel Ins...
Knipex Twin Grips (Affiliate Link) - amzn.to/3Ha2Bll
Review - • Knipex Twin Grips - Do...
Klein Hollow Nut Driver Set (Affiliate link) - amzn.to/3U9kJnb
Video Here - • NEW Klein HOLLOW & Mag...
Olight Oclip (Affiliate Link) - amzn.to/3U8DAyV
Video Here - • OLight OClip - The Per...
Klein Ratcheting 11-1 Screwdriver (Affiliate Link) - amzn.to/3xtWjfp
Video Here - • NEW Klein 11-1 RATCHET...
Knipex 10" SmartGrips 85 01 250 (Affiliate Link) - amzn.to/4cO6I5S
Video Here - • Knipex Auto Adjusting ...
Tool Links:
Pica Pencil 3030 (Affiliate Link) - amzn.to/33seLX2
Fluke Non Contact 1AC - AII (Affiliate Link) - amzn.to/3AoYizf
Knipex Pliers Wrench 10" 86 01 250 (Affiliate Link) - amzn.to/3tE3Ynh
Knipex Cobra 87 01 180 (Affiliate Link) - amzn.to/33G9s62
Knipex Plier Wrench 86 03 180 (Affiliate Link) - amzn.to/3GB3LoM
Milwaukee Adjustable Wrench (Affiliate Link) - amzn.to/322OdLk
Channellock 6” Adjustable Wrench (Affiliate Link) - amzn.to/3RcJvyS
Knipex Hammer End Pliers 51 01 210 (Affiliate Link) - amzn.to/3FwRY9B
Knipex Long Needle Nose 28 71 280 (Affiliate Link) - amzn.to/3FExWKq
Knipex 8" Diagonals (Affiliate Link) - amzn.to/3fB0Nol
Fluke 324 Meter (affiliate Link) - amzn.to/33tIbnE
Dewalt Bit Holders (Affiliate Link) - amzn.to/3ALrIb0
Makita 1/4" Sockets (Affiliate Link)- amzn.to/3Kt7Uh1
Chalkshot (Affiliate Link) - amzn.to/3PRcOIM
Olight I5R (Affiliate Link) - amzn.to/3Udpe0o
Wuben F5 Light (Affiliate Link) - amzn.to/3vH21tZ
Rack-A-Tiers StudBall (Affiliate Link) - amzn.to/3U9oLMo
Klein 27-1 Precision Screwdriver (Affiliate Link) - amzn.to/3U9k2dz
Small Dust Pan & Brush (Affiliate Link) - amzn.to/3UaO5S9
#loadout #hvac #knipex #klein #milwaukee #dewalt #wera #electrical #makita #wiha #Fluke #channellock #holstery #pica #rackatiers #diy #vetopro #olight #wuben

Хобби

Опубликовано:

8 апр 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 127

@chrisfyfe9212 Месяц назад

Loadouts are a Rabbit Hole. No matter how well planned , always need re thinking !

@MORGANSMaintenance Месяц назад

It’s something that is always “a work in progress”

@kentblumenshine3743 2 месяца назад

This is an incredibly well thought out set up and very well presented thank you very much

@MORGANSMaintenance 2 месяца назад

Appreciate it 👍👍

@RileyKnifeandTool 3 месяца назад

Looks like a pretty slick and well thought out loadout. Great use of that 8-in-1 sheath too!

@MORGANSMaintenance 3 месяца назад

It makes it really nice. It would either be falling out or hard to get otherwise

@davehowell4111 3 месяца назад

Very nice load out. Don’t we all love r Veto tool pouch’s. So enjoy ur videos, this is #3 Veto for me. Keep up the great videos. 🧰🧰

@MORGANSMaintenance 3 месяца назад

Appreciate it 👍👍

@DubG89 3 месяца назад

That was beautiful 🥲🤧👏

@MORGANSMaintenance 3 месяца назад

😂… appreciate it

@parkerjohnson5420 3 месяца назад

Very nice loadout! I was in Lowe’s the other day and saw a new Klein flip socket that goes up to 3/4!

@MORGANSMaintenance 3 месяца назад

Yeah I’ve seen that one at mine too. If they ever sell the sockets individually I may get it.

@skylarfaria2457 2 месяца назад

Looking forward to getting this I just got myself a TPXD and love it already

@MORGANSMaintenance 2 месяца назад

It’s a pretty good bag. The spot in the back makes it a little unique 👍

@Eddy63 3 месяца назад

Nice bag & load-out ... I finally got my metric impact flip sockets by Vaco and I like them ... Thx

@MORGANSMaintenance 3 месяца назад

The flip sockets are a good option to get several sizes in one package. I don’t use the metric that often, but never mad I have them when I do.

@chrisfyfe9212 23 дня назад

Tool Logistics is a game you can never win ; but you can greatly improve your performance , minutes saved quick add up to hours !

@MORGANSMaintenance 23 дня назад

Yes it does 👍

@chrisfyfe9212 23 дня назад

@@MORGANSMaintenance I’m a dirty Bastid ! I’ll take any shortcut that doesn’t impact quality / performance !

@SIR_TOOLS 2 месяца назад

I load my pliers the same way make to much sense awesome video! 😎

@MORGANSMaintenance 2 месяца назад

I like it much better that way. Appreciate it 👍👍

@iri1088 Месяц назад

Awesome!

@MORGANSMaintenance Месяц назад

Appreciate it 👍👍

@fransiscoscaramanga674 2 месяца назад

Nice set of tools, i also own those knipex pliers and cutters, also own vessell screwdrivers, love the torque you can put on them..

@MORGANSMaintenance 2 месяца назад

They are my 100% favorite right now. Other than my impact 11-1, I pretty much only use them.

@three-phase562 3 месяца назад

Great to see your load out, thanks for sharing. I am finding the small outside pocket a little larger and don't hold tools quite as nicely. Also found that the bit hold sockets inside the front pouch are smaller and don't hold my 3/8 drive deep sockets and extension like my other bag.

@MORGANSMaintenance 3 месяца назад

The side pockets are a little weird on sizes to me. Too big or too small for most things.

@gustavomacall4997 3 месяца назад

With constant new tools coming out and new bags it's impossible to get the perfect tool setup , it'd never light enough.

@MORGANSMaintenance 3 месяца назад

That’s why I like my pouches, they make it so I can’t over do it 😂 You are right.

@davidmurray3504 3 месяца назад

Perfect timing. I just got my SB-LD yesterday. I purchased the MCT Blackout for the promo. I also have a TP-LC as my truck grab bag. I’m not exactly sure what this bag will become. I like the idea of a drill bag with the M12 installation driver.

@OnusBones 3 месяца назад

I got a DP3 as the free bag with a TP-LC, and it fits the M12 installation driver; that's what my wife is using now.

@MORGANSMaintenance 3 месяца назад

I’m not sure if I’m switching to the MB5B yet or sticking with the MCT Blackout. The MCT Blackout has been my favorite bag so far, so it’s hard to pull away from it.

@MORGANSMaintenance 3 месяца назад

I’m working on getting the DP3 myself.

@1970gregg 3 месяца назад

I agree with you on removing a set of Allen bits. I would probably give up the flip sockets since you have the pass though nut setters and the Milwaukee crescent wrench

@MORGANSMaintenance 3 месяца назад

Yeah, I think I can lose either the flip sockets or the pass thru’s.. I may have to run the pass thru’s for awhile and see if the length is too long, too often. If so I may have to keep the flip sockets instead since I can put them on shorter shafts.

@projectpinehills 3 месяца назад

Great video, great load out. I see you liked those Snap-On LN47ACF’s. I like that parts case.

@MORGANSMaintenance 3 месяца назад

Yeah they are amazing for gripping and pulling on stuff. They will not let go. The smaller pair has Becky my electrical locknut pliers. Best tool for those I’ve seen yet.

@Justin-C 3 месяца назад

Got this on the way as a freebie along with the TP-XXL - makes it much easier to pull the trigger on a premium-priced bag when you get two. I'm pretty stoked to be receiving two very promising looking bags both with nice meter compartments. This SB-LD could end up my main bag because of that. Very nice & well-designed bag by the look of things - as expected of Veto at this point - I can't wait to get them. The size of the pile of tools out of these things contain is always surprising - like a clown car. Seems like your setup covers most things you could encounter in many trades. In addition to some of what you have, I'll have a Wera tool check in mine, along with a Milwaukee Fastback 1505, and their new 8pc insulated slim-tip blade driver set '48-22' which are nice. Might consider your 51 01 210 carpenters cutters/hammerhead as a hammer stand-in (for things like wire staples)!

@MORGANSMaintenance 3 месяца назад

I am always amazed at what they will hold. I thought about the XXL but ended up with the MB5B, still unsure about it. I carry a 1505 in my pocket all the time, really good knife.

@biggig8548 3 месяца назад

Morgan loved the video and finally great to see a loadout for this bag. I do a lot of low voltage work and been looking to get this as bag for my hand tools and meters. I think my favorite part of your video is the Klein 8 in 1 stubby with the Riley sheath where it clicks in perfectly. I found it on Riley Knife and Tool website but was just curious if that's the only place to purchase it. Also curious how its been holding out and if you ever notice any wear over time. I'm in the same boat with many that either the stubby goes in too far or inadvertently pops out and drives me crazy! Thank you!

@MORGANSMaintenance 3 месяца назад

I don’t think he is selling them on anything else. He still hand makes them all individually as far as I know. I haven’t had any issues with any of mine. The stubby one is really just a sheath and some fasteners so I can’t see it really tearing up, especially how I’m using it. I have some of his for my bigger screwdrivers that have belt clips on them. I haven’t had any issues with those either, but I also only use them in special circumstances.. not everyday. They seem quality built to me, but even if you have an issue multiple people have reached out saying how easy he has been to deal with on support. I’m sure he would make it right.

@user-sp5eh7km7j 3 месяца назад

I also got the MB5B with this one, found the MB5B kind of heavy, went with the SB-LD for HVAC troubleshooting, great side and rear storage.

@MORGANSMaintenance 3 месяца назад

👍👍.. I haven’t got my MB5B loaded out yet. Hope to spend some time on it next week. May finally have a small window between jobs. I do like this bag though (still be better with a flap)

@2121contreras 3 месяца назад

Nice load out morgan . Shame that rover light couldn't fit in there. Also if your not gonna use your installation driver heads much might be a good trade out for an extra m12 battery. I always try to keep a extra battery close by. Thanks again morgan see you on the next one

@MORGANSMaintenance 3 месяца назад

I might end up doing the battery for the offset. I don’t usually run into needing it as often as the right angle. 👍👍

@sparkiegaz3613 2 месяца назад

Just subscribed feller,,,looking into catching up with your videos 👍👍👍

@MORGANSMaintenance 2 месяца назад

Appreciate that 👍👍

@sparkiegaz3613 2 месяца назад

@@MORGANSMaintenance thanks for heads up I never knew klein did the flip sockets in our silly metric,,,,god if only we stuck with feet and inches 🤔😡😡😡🤬🤬🤬🤣

@MORGANSMaintenance 2 месяца назад

@@sparkiegaz3613 my carpenter side gets why metric would be much easier. Sometimes the fractions get a little crazy. It would be nice to just say, add, and subtract numbers.

@sparkiegaz3613 2 месяца назад

@@MORGANSMaintenance mmm I tend look at the old inch side of the tape more 🤭👍🤣🤣🤣🤣

@Hazan1fan 3 месяца назад

In my option here’s what you can get rid of: Side cutters- you have the knifed carpenter style , the LN47ACF and the knipex installation pliers all with cutters. You have the Klein stubby so you don’t need the Wera mini screwdriver. The knipex pliers wrench is technically an adjustable wrench so I would carry 1 of each. And they can compliment each other if you needed to use them on opposing sides of a nut. I think you can either get rid of the Kleins but drivers or the flip sockets, since they’re one and the same. And as you mentioned, you don’t need the hex keys AND the ball end. Remember what they say “ounces are pounds and pounds are tons”

@MORGANSMaintenance 3 месяца назад

I know.. at the beginning you know how it is… what will “fit” 😂😂 Even making the video some of your same thoughts were dawning on me. Appreciate it 👍

@OnusBones 3 месяца назад

Nice look at that bag. It certainly fits a lot. I need to finish a TP-LC loadout, then decide if I want a SB-LD (plus another free DP3), or wait for the TP-LD. I'm inclined to think I'll wait.

@MORGANSMaintenance 3 месяца назад

I would like to have a flap myself. That’s just like it was raining here today and even with the bag in my truck with the doors open, I still got some sprinkles on my tools. Just opens them up for rust (not mine since I clean and Houdini the Fire out of them)… but for most.

@Justin-C 3 месяца назад

@@MORGANSMaintenance yeah, with the TP-XXL on the way and this SB-LD as a freebie.. despite wanting to possibly downsize even more, lack of a flap against rain is one reason I might stick with the TP-XXL as a main. We'll have to see. Solid 'freebie' promos like this of well-designed & made products seem rare this day & age.

@jeanluc397 3 месяца назад

Great Vid. I got the Tech XL-Wheeler which I'm currently loading which will be my "Mac Daddy" bag then I got the SB-LD still waiting on. My current main bag is my TP XXL which I love by the way. I think I can make the SB-LD my main carry in bag with the MPX1 or 2. I'm trying not to duplicate but I'm worried I'll forget my mpx1/2 one day and I won't have my main top 5 tools duplicated . But great tips. The Decisions to make on how to load bags are mind boggling.

@MORGANSMaintenance 3 месяца назад

That looks like a good bag too. Yeah I am an over thinker when it comes to organizing. I have found just trying something and adjusting over time is better for me than just starting at the bag (or my truck) and thinking 😂 It’s always hard, especially if you are like me and do so many different things.

@gpraceman 3 месяца назад

I recently got the Tech-XL Wheeler as well. Boy, my wallet hurts! That is my general purpose bag now. It's nicer wheeling my tools around instead of lugging them. I first tried the Tech Pac Wheeler but couldn't fit all of the my tools in there (and didn't like that the backpack straps were not removable). The SB-LD will be my electrical bag, whenever I get it.

@scotts4125 3 месяца назад

I ordered that little brush. Really neat item. Did Klein tell you when the metric sockets would be out? I also ordered that Sperry NCV. I haven't used it but played around with it.

@MORGANSMaintenance 3 месяца назад

They didn’t say. Some have been seeing the set they sent on the shelves, so hopefully the metric won’t be far behind. I plan on keeping the Sperry in whatever is my bigger bag with my testing stuff.

@tomlin03 2 месяца назад

Great video! Somehow i missed this one but glad it popped up in my feed. I have the icon mini ratchet set and im looking to squeeze it in with minimal footprint but i really want to have 1/4 sockets to pair with it. Are the klein flip sockets a viable/space saving option or would I be better suited using the maktia socket rails you have shown? I have similar railer bit rails to cover bits.

@MORGANSMaintenance 2 месяца назад

The flip sockets work, just not as small a footprint as the Makita Sockets on the hex adapter that comes with the Icon.. you can get them in tighter spaces. For general use out in the open, the flip sockets do fine.

@MattHmm-rq6dn 3 месяца назад

If you need wego storage I tend to use AA battery cases thay interlock Chadou Battery Storage Case for AA or AAA, Battery Holder Box (6 Pack Clear) Little plastic cases for aa's and they hold 5 or so perfectly flat and I can seprate 2s 3s 5s and other consumables like outlet spacers in them. They fit really well in thoes laptop back pockets. My main packout for electrical has 10 or so of them keeping all the specialty stuff separated. I paint marker on the front of them w2 w3 w5 ect... they lock into each other easy to make a sheet of consumables 👍

@MORGANSMaintenance 3 месяца назад

Yeah I actually have some of those. Brian Hall mailed me some. Good idea 👍

@morganbutton5389 3 месяца назад

Can we get a video of all the b-swap panels you are running in the 5B I’m about to purchase an would like to see what can be can ran, I do low voltage an wanna run the meter box with the Joey as the tool holder, great videos as always.

@MORGANSMaintenance 3 месяца назад

I didn’t buy any extra than the ones that came in it, but I’m able to make some of the ones from my MCT fit. I’ve mostly just been moving them around in different locations.

@MattHmm-rq6dn 3 месяца назад

I cut down my drill bit set to 5 drill bits on a tiny railer and "veto'd" all my hoex bits down to the 2in ball end set dumped the 1in ones and lost a pound or so. I have almost dumped the side cutters as well as the linesman for the marvel cross cut combo pliers (engineer vampliers makes one) since that does twisting and cutting 90% of the time. The side cutters 10in may stick around but the linesman have been exiled

@MattHmm-rq6dn 3 месяца назад

Marvel Pliers MVA-200N seem to be the best over the Taiwan engineer/vampliers but you have to import them sadly but cut easily as well as my forged wire strippers and don't have much head to jam in a box in tight spaces

@MORGANSMaintenance 3 месяца назад

I think I can get by without my bit set, and just put my most common bits in those bit holders… then use the 11-1 for the Squares, Slotted, ECX if I need them in a drill (which isn’t often. I haven’t carried Lineman pliers in along time. I will check out out those pliers 👍

@Stefan_Kawalec 3 месяца назад

Nice, well thought, mature loadout. We will draw a veil over the fact that its cost exceeds a GDP of a small country.

@MORGANSMaintenance 3 месяца назад

I did at least borrow tools from other bags instead of buying all new 😂 👍👍

@ryangandy1127 2 месяца назад

Got mine for free!!

@CarlosMartinez-mj6cu 3 месяца назад

First awesome video. I really enjoy all your videos. I would really like to know if the surge fits when you get it. That will sell me on it.

@MORGANSMaintenance 3 месяца назад

It does fit. Mine is fairly tight because of the Nohlster, but just regular would fit easy

@CarlosMartinez-mj6cu 3 месяца назад

@@MORGANSMaintenance awesome. Thank you very much

@MORGANSMaintenance 3 месяца назад

@@CarlosMartinez-mj6cu 👍

@gpraceman 3 месяца назад

I'm waiting on my SB-LD after getting the Tech-XL wheeler. I assume that Veto will let me know when it ships. I'll be making the SB-LD my electrical bag. Those adjustable wrenches and the two pliers wrenches seem rather redundant. I'd get rid of the adjustables. Though, I carry one pliers wrench and one Bahco big-mouth adjustable. The Bahco to hold the work piece and the pliers wrench to do the wrenching. All of the nut drivers and the flip sockets seem redundant as well.

@MORGANSMaintenance 3 месяца назад

They normally send you info through the process. Appreciate the suggestions. All those make sense 👍

@jaydoherty8402 3 месяца назад

I wonder if you could fit the Fluke 324 in the back pouch somehow still with the installation driver. And then could the M12 rover light fit on the outside where you had the meter? Just an idea, I know you said the back is your favorite part of the bag so don’t mess it up if you like the back with just the drill.

@MORGANSMaintenance 3 месяца назад

I think I can, I was thinking of trying that myself. I generally get my meter out on a lot of calls, so I was leaving it in the outside… but I may can leave my leads plugged in and wrapped around in the back. Will have to try it and see 👍

@gnic76 3 месяца назад

That was informative to say the least. 👍 Sigh I try to lighten my bag and then end up tossing something else in the empty spot.. I can never win. 🤣

@MORGANSMaintenance 3 месяца назад

Me too. I guess as long as we replace each one with a lighter object we will make some progress 😂

@gnic76 3 месяца назад

@@MORGANSMaintenance 😂 true, or I take something out, then two jobs later I need it for something.

@MattHmm-rq6dn 3 месяца назад

I have to resist the urge to stick a tool in every empty myself "I don't need that but it may come in handy!"" As you carry a 40 plus lb bag

@MORGANSMaintenance 3 месяца назад

@@MattHmm-rq6dn that’s exactly what’s happening here 😂

@MORGANSMaintenance 3 месяца назад

@@gnic76 the only way I think I could make that not happen… will be the day I can pull my truck into a person’s living room.. 😂

@southwood308 2 месяца назад

I think this was the video where you mentioned you wished the SB had a cover. Veto makes a TP-LC as well as this bag. Found it on their website by accident. It does have a cover for the main compartment

@MORGANSMaintenance 2 месяца назад

Yeah, I have the TP-LC. It was a free bag before. I really like it. It is pretty similar, a few more tool slots up front, but without the zipper section in the back. Had the SBLD not had the section in the back I wouldn’t have even tried it, I would have preferred the LC for the flap. Appreciate the heads up 👍

@southwood308 2 месяца назад

@@MORGANSMaintenance sorry I missed typed. TP-LD Blackout. It must be smaller than last year's LC because the panels swap between both of the LC's

@MORGANSMaintenance 2 месяца назад

@@southwood308 LD or XD? I see an XD… I had actually looked at that one before but it wasn’t available to order yet… I see it is now

@MORGANSMaintenance 2 месяца назад

I just found the LD…that is actually the one I saw that wasn’t available yet. It looks nice

@MattHmm-rq6dn 3 месяца назад

I traded my 10in pliers wrench for a oil filter wrench because most of the time if it's that big its plumbing related and has alot of uses besides plumbing on big nuts. Like you I run 2 small bahco adjustable 10in cobras and 7in cobra/pliers wrench rarely do I need big nuts like that. The bahco adjustable wrenches are lighter than thoes in your bag or go lobster which are crazy light. My rigid one stop wrench has almost replaced my 7in pliers wrench as well at times since if it needs open ended its on the one stop.

@MORGANSMaintenance 3 месяца назад

Yeah my 10” may end up going too. I rarely need them (for what I will be using this bag for) and those are heavy. My truck is usually within 50 feet of where I’m working too. That’s what I have to weed out. If it’s a once every 50 jobs to go 50’… who cares. If it’s every 5, it needs to be in the bag.

@onikwa 3 месяца назад

10" pliers wrench is way too big compared to the 10" cobras. Would love a smaller version of those, like the 180mm pliers wrench head size but with longer 10" handles. The 180s are good too but sometimes they're too small.

@MORGANSMaintenance 3 месяца назад

@@onikwa the 10’s are a beast. It’s what you grab to protect yourself 😂

@colinhudson3723 3 месяца назад

Tool totes , bags ect are so limited here in Africa. The cost to ship a Vito bag here costs what the bag does. Watching with envy ..lol

@MORGANSMaintenance 3 месяца назад

Sometimes we take things for granted not realizing it’s not something everybody has the opportunity for… That’s in tool bags and life 😂 Maybe one day they will make it your way

@jeffreyesguitar5129 2 месяца назад

Do you know of any other bag that is comparable? I'm looking for something similar to that size and function for when I need to build a quick go bag from other dedicated larger bags. $150 is a little rich for my blood.

@MORGANSMaintenance 2 месяца назад

There aren’t a lot of people that make middleish sized bags. It’s usually either pouches or big bags. I carried a Husky bag before and liked it ok. I would go to Lowe’s and zoomed Depot and see what they have in ToughBuilt and Husky

@mdunbar04 3 месяца назад

👍👍👍

@MORGANSMaintenance 3 месяца назад

Appreciate it 👍

@brandongarner2895 3 месяца назад

I know it sounds crazy but I wore a mp1 with a basic loadout every day all day (when i was working as an hvac tech full time) it cut down on how much was in my tech bag because I was always going to have that mp1

@MORGANSMaintenance 3 месяца назад

Yeah, I pull out my MP pouches more than anything. I may need to think like that. Take a MP pouch anyway, then take the similar tools out of the bag 👍

@brandongarner2895 2 месяца назад

@@MORGANSMaintenance yep I always had a beater flat head Klein hvac screw driver knipex dykes knipex forged strippers assorted markers and drill bits and razor knife and a multi meter in my back pocket so you could open your driver door and walk in and probe enough at the problem to figure out what else you need. I’m now a general contractor and my daily driver is dimondback mazo that just changes based on what environment I’m working in.

@MORGANSMaintenance 2 месяца назад

@@brandongarner2895 👍

@Whizzbanga 3 месяца назад

God you keep your gear clean

@MORGANSMaintenance 3 месяца назад

I try to. That is a brand new bag, I just got it… but I do typically wipe off my tools and keep them lubricated.

@Neto-1984 3 месяца назад

Hello. I went over to your Amazon page to look for the storage container and the tiny brush, I take it they're not listed?

@MORGANSMaintenance 3 месяца назад

I have it is the description, my SBLD list isn’t showing up in my store for some reason. I will add it again. The store is a work in progress I’m still working on it when I find time. The storage container I got with some Wagos I ordered. They Wagos came inside it… these here amzn.to/3Jf0tu8 I will add the brush in the store though. Thanks for the heads up 👍

@MORGANSMaintenance 3 месяца назад

I added the brush in the description and the SB-LD Loadout in the store

@Neto-1984 3 месяца назад

@MORGANSMaintenance Thank you. That's why we watch these videos to see what tools and ideas we may pick up... although sometimes I do play the videos in the background and end up missing an item.

@MORGANSMaintenance 3 месяца назад

@@Neto-1984 I have that happen to me too. I will have a video playing and be responding to messages on here. Probably end up catching 50% of other’s videos

@prestonbrown8273 3 месяца назад

How are you attaching the patch on front?

@MORGANSMaintenance 3 месяца назад

I took a piece of scrap aluminum I had and put some hook/loop on it. Then screwed a tape measure clip on it

@MattHmm-rq6dn 3 месяца назад

I personnel use pass through nut drivers unless I'm in a commercial unistrut situation if don't don't see using thoes a ton there a pound or 2 of metal not clanking around.

@MORGANSMaintenance 3 месяца назад

Yeah, they might be the first thing that ends up going. I can generally use a wrench to get whatever either torqued down or broke loose after the finger spinning. Not a huge time saver to have those all the time.

@jorojiga 3 месяца назад

Does anyone know how to get veto pro pac in Mexico. Those bags are nice. But I think they don’t ship to Mexico

@montebarger866 3 месяца назад

Ebay, I'm in Alaska and get wrecked on shipping going thru Veto.

@MORGANSMaintenance 3 месяца назад

I don’t, but EBay sounds like a good suggestion 🤷‍♂️

@alekseyshumilov2304 Месяц назад

Do you have a review of mb5b?

@MORGANSMaintenance Месяц назад

No not yet. I have a video talking about it… but not really a review MY NEW Veto Pro MB5B Compared to My OLD Tech MCT Blackout Advantages? #tools #vetopropac #toolbag ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MeGBkqlCfjE.html

@alekseyshumilov2304 Месяц назад

@@MORGANSMaintenance Thank you 👍

@wackyweyland8857 3 месяца назад

My MB5B already has stitch damage where the shoulder straps attach, kinda disappointed considering I'm under the payload (about 20 pounds). Worst part is it hasn't even made it to a jobsite yet... I tried to stick a meter and m12 impact in the back pocket and was very sad i couldn't fit both inside. 😅🥲 Also, did you get the DP3, too? If you did, you should make a video on that ,too.

@MORGANSMaintenance 3 месяца назад

My MB5B hasn’t left my garage yet.. that does stink. I hope Veto doesn’t start cutting corners on things. I didn’t get a DP3.. my buddy might be ordering a bag though and I told him I would buy the DP3

@MattHmm-rq6dn 3 месяца назад

You should get the dp3 it's nice i ordered the kp-xl so I could get it. The kpxl actually is really nice it's either on my front passenger seat or behind and I store common use things. I didn't think it was worth 100+ but the free bag pushed me over. Now looking back yea I would have ordered it solo if I knew how usefull it was.

@MORGANSMaintenance 3 месяца назад

@@MattHmm-rq6dn 👍.. my buddy wants an SBLD but doesn’t want another bag. I told him to order one and I’d buy the DP3 off him.