I am, thank you so much. I’ve been dealing with some medical issues but all is good. I’m working on a video for release this weekend. Thanks for the support amigo!
Starter to block or bell housing poor contact or bad bonding wire which needs to be moved as close to the starter as possible for all cars if I work in that area, I also like redundant grounds in several places by adding on an Earthing Kit and check VD on positive battery wire to starter also. Cranking is turning the starter only, starting is the engine is running. NO CRANK is no starter action, NO START is the engine will crank but not start and actually run. A melted starter solenoid is a bad connection generating too much heat. As for stalling on the road is totally unrelated to crank or start problems.