Volvo Penta DP outdrive oil change. How to change the oil in a duo prop

Подписаться 66 тыс.

Просмотров 46 тыс.

50% 1

Change the oil in my Volvo Penta DP SM duo prop outdrive. I show you step-by-step how to do a DIY oil change on your Volvo Penta DP-S outdrive for your inboard/outboard boat. The drain and fill locations are different than an outboard engine but the basic process is the same. If you have ever changed the lower unit oil on an outboard, this is a very similar process and this video will show you the differences and locations of the drain and fill points because they are not obvious or as easy to locate as they are on a boat outboard engine.
▶︎ Here's the video for removing the duo props: • Removing duo props - u...
Looking to buy some of the parts and tools?
Here is a Marine Lower Unit Fluid Pump amzn.to/3spCRJb
Buy Synthetic Marine Gear Oil 75W-90 amzn.to/3srjjo3
A better O ring assortment box than I got! amzn.to/3srLzqq
Volvo Penta Duo Prop Removal Tool amzn.to/2PwntMA
Hex Key Allen Wrench Set amzn.to/3rnAxBh
Here is a simple and cheap drain pan amzn.to/3cmyOrx
As an Amazon Associate I earn a small commission from qualifying purchases.
#outdriveoilchange #volvopentaduoprop #volvopentaoutdrive
Timestamps:
00:00 Introduction
00:30 What is different with a Volvo Penta duoprop
02:18 Draining the oil from the dp-s outdrive
05:06 The basics of changing oil in outboard lower units and outdrives
10:08 Refilling the outdrive with oil
12:34 Reinserting the drain and fill plugs
❤️ Subscribe to my RU-vid Channel / waynetheboatguy
📷 Follow me on instagram! / waynetheboatguy
☞ Follow me on TikTok! / waynetheboatguy
▶︎▶︎▶︎Playlists About Boats
🚤 Tiny Boat/Jon Boat Stuff • Tiny Boat - Little Boa...
💰 Boat Shopping • Boat Shopping
🐋 Boston Whaler • Boston Whaler Videos
🛥 Boats, Boat Trips & Boat Accessories • Boats, Boating Trips, ...
⚡️ Electric Boats & Electric Boating • Electric Powered Boats...
🛶 Kayaks & Kayaking • Kayaking & Kayak upgrades
🪦 Curtis Creek Maryland Ship Graveyard • Curtis Creek Maryland ...
🎲 Boating Shorts • Boating Shorts
▶︎▶︎▶︎Boat Engines & Motors Playlists
⛽️ 2 Stroke Outboard Motors • 2 Stroke Outboard Engi...
⚙️ Volvo Penta Maintenance & Repairs • Volvo Penta Maintenanc...
🌎 Newport NT300 electric outboard • Newport NT300 3 hp Ele...
🚽 Evinrude 2 - 2 hp engine • Evinrude 2 - old Evinr...
🔒 Seized Suzuki DF20 • Suzuki DF20 Short Shaf...
🔧 Inboard/Outboard Maintenance • Inboard Outboard (Ster...
▶︎▶︎▶︎ Boat Repairs & Projects Playlists
🛠 Low Cost Boat Repairs & Projects • Low Cost DIY Repair & ...
🔨 Boat Transom Projects • Boat Transom Projects
🧰 Boat Repair & Maintenance • Boat repair, maintenan...
🛞 Boat Trailer Projects • Boat Trailer Repairs &...
▶︎▶︎▶︎New Boater Playlists
📌 Boating Education & Tips • Boating Education and ...
📓 Boating Basics • Boating Basics for New...
🆘 Boat Safety • Boat Safety - videos t...
❄️ Boat Winterization • Boat Winterization
Sound effects and additional music is copyright free from iMovie

Развлечения

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@user-xi6sq2qv5x 7 месяцев назад

Capacity on that drive is 2.5 Qts. 1 note of caution - Do not overfill. If you do, it causes pressure in the lower unit to build up and after running the boat at speed. When you come off plane you may not be able to shift back into neutral right away. Have to idle for about 2 mins to let the pressure come down then you can shift. I know this from experience. Chased that issue for years, until i realized why. And when i say "do not overfill", what i mean is you only want the level on the dipstick to be 1/3 up the stick. If you fill it above half way that is overfilled! Trust me- been thru this.

@WayneTheBoatGuy 7 месяцев назад

Wow that's a great tip! Pinning this comment

@lindsayjohnbabineau7405 Год назад

I am embarrassed to say how much I just paid my mechanic to do this job. Next year I will review this video and do it myself then take my wife out for a very nice dinner with the money I save. Very good information. Thanks.

@jacquespoirier9071 Год назад

I have developped rreserve tanks for many odd applicatrions including OMC stringer, Volvo AQ 100, 200, 250 and 290 duo prop, the only thing I can say is that when I used such tanks the advantages were numerous, the first one is the peace of mind, the second is as the drive is vented to the atmosphere, the problem of water intrusion is eliminated, finally, the oil level is easily monitored. I always use 75W-90 Ep synthetic gear oil, grade GL4 ( GL5 can attack brass of the drive cones). Very good video.

@sailingpittsburgh 3 года назад

That was a nice tip about the wrench and screw driver to get more leverage on a tight screw. I never saw that one before.

@WayneTheBoatGuy 3 года назад

Thanks!!

@MrEd-hg3wy 3 года назад

I noticed you use PB Blaster, smart man. I learned about it from a Professional Marine Contractor. Good Stuff.

@WayneTheBoatGuy 3 года назад

It comes in handy!

@darrylmcleman6456 3 года назад

Soon time to float it again!!! Good stuff! CHEERS from Canada

@kevinmccarey5015 3 года назад

Hello to you again Wayne, Omg 😱 make sure you have old rags is very true here. I changed my Alpha One Gen (2) drive oil last spring launch and very rewarding for me. It was black but no water intrusion which was great. I bought (2) new screws with gaskets. I learned so many good things with this drive. So now you finished that project, get ready to clean your drive and spray paint it with anti / Fowler paint for the salt water. You have done wonders with that boat. Keep plugging, great video. Be safe Be well

@WayneTheBoatGuy 3 года назад

Thank you!! Do you have an anti fowling paint you recommend?

@kevinmccarey5015 3 года назад

@@WayneTheBoatGuy Hello Wayne the fowling paint I recommend is Interlux (Trilux 33) gray color. $ 39.00 bucks West Marine or any boat supply. (1) can is plenty.

@davidglover771 Год назад

Could you lift the outdrive after it’s full so you don’t have gravity working against you?

@1spittfire 3 месяца назад

When you check the oil level. Are you supposed to screw the dip stick in? I thought you just should leve it lose when check the level?

@rockyesterline7942 3 года назад

They have a nice impact drivers to get that screw out one little hit of the hammer is loose are you sure there's not a screw on the very bottom of the outdrive !

@WayneTheBoatGuy 3 года назад

Yeah I checked the lower section of the outdrive a few times because I couldn't believe there wasn't a low drain on it except behind the props.

@rw7051 Год назад

do you do the anodes also? i want to use magnesium.

@WayneTheBoatGuy Год назад

Yes! Here’s a video of that: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HKBqm5PUM7c.html

@CHIPYRUST 2 года назад

What happends if you add oil trough the dipstick hole? Does it make a difference

@WayneTheBoatGuy 2 года назад

Well, the problems can be trapping some air so that it doesn't show full correctly & not getting it filled to the exact right level.

@CHIPYRUST 2 года назад

@@WayneTheBoatGuy Alright, thanks alot

@darrylmcleman6456 3 года назад

Threaded dipsticks vary from one manufacturer to another.Some are to be threaded in to check the oil and some you do not screw them in to take a reading.Probably you are already aware of this.

@WayneTheBoatGuy 3 года назад

I did do a few checks to see how it was supposed to work - it’s funny how vague a lot of the boat info is compared to cars!