We all want bigger brakes, maybe for a splash of colour or style? maybe for performance? better modulation.
In this vid I show how i done it on mine for less than £30 each end! BARGAIN! you can even do it for less if you go for cheaper caliper mounts.
Orginally i doubted it too, so i bought a 160mm/140mm mount and it was the same as the mount i took off. then i ordered 180mm/160mm mount and its the right fit.
so what we have learnt is due to the angle the arm is in relation to the horizontal the bigger the bracket has to be. same as on a bike this bracket would only work on a 160mm rotor if its mounted on the rear of a bike.
now as the swing arms are identical on the ecsooter it fits both ends like it would the rear of a bike due to the low angle.
if you like what i'm doing here, comment and subcribe
Tools required:
21mm socket and ratchet
4mm and 5mm ALLEN keys
25 torx bit and driver ( for new disk screws )
Locktight
LINKS:
www.amazon.co.uk/Snail-Bicycl...
www.uberbikecomponents.com/vi...
22 окт 2021
