VSETT 10+ Electric Scooter Tire and Tube Change 

2 years later and this is still the best Vsett 10+ tire change video! Great work again RevRides! Using it today just to refresh my memory as I put on the PMTs!

Changing tire for first time this year. I didn’t have to remove fender but I removed the two left screws to get the motor cable to the left side for room to work on the tire

Love that you gave torque specs! Thxs!!

this was extremely helpful! Much easier than changing tire on EUC and a lot less can go wrong!

just did my first tube change, thanks for the video guys!

Got my first flat on my VSETT 10+, thanks for the tutorial, very helpful. Thank you!!!

GENIAL VUESTRO TUTORIAL, AMO EL VSETT DESDE QUE LO CONOCÍ POR RU-vid, GRACIAS POR COMPARTIR EL GENIAL TUTORIAL

Muchas gracias chicos, genial, me salvaron, saludos desde Colombia

Great video. Thank you so much!

Great Video Tyler!

very helpfull! , I just change mine, i didnt need to take the brake disc but thank you very very helpfull.

Great video and very helpful, thanks! Just curious why you used newton meters for the small bolts but foot pounds for the wheels axle? I mean in the end it's only a matter of converting the metrics but I found it a little interesting anyway...😉

I patched up the inner tube on my VSETT 10+ today, and there is no need at all to remove the brake rotor or caliper. It is still somewhat of a hassle, but at least a couple of steps are of the list. Also, there was no loctite at all on the 6 screws that keep the rim together.

Wow, this is INFINITELY EASIER than my Emove Cruiser tire change!! I need to get the vsett 10+ ASAP!!

Basically this is applied to all electrical scooters ❤, thank you

Man awesome video!

Hey Tyler love your videos I just ordered a vsett 10plus is there any way you can do a video on the PO settings does a couple of videos but they are a different language thanks

Loving the video format, could you guys do a video on replacing front swing arms??

Nice video! 👍

You guys rock!

Thank you so much! I was dreading changing this tube and it made it really easy to follow. Explaining how much torque to use is a great idea, too often overlooked.

Can you please show how to programme phones to key reader and explain how it’s security system works if it’s any good? Cheers your videos are just so good since there is not a lot of people that can help in some towns

Brother thank you i finally manage to get the tube in lmao 😂 i was F*** up the thing i didnt blew any air in the tube than took a jump to gas station and manage to get it in at first

3 mins in so far so good 😂🎉

thanks man, that was easy to deal with...

Nice work guys.

Good job👌👌 very Profesional

Hello, nice video ! Can I use excerpts from the video (without sound) to illustrate what I'm saying in my video? This is for a french presentation video. Thank you for your reply. Yours sincerely 😉

Man my break rotor screws were in their so tight, one of them got stripped 😢....ANY ADVISE on how to get that bolt out???

Thanks for this Tyler - gotta do my first tube change this weekend

Super helpful for when I have to change everything. Is there a Manuel you guys have that shows all the areas and how much you have to torque them

Thanks for the vid mate. I need to replace the tube in the rear tyre. Weird thing is I see nothing in the outside tire. No nail, nothing. It just went without air....

Does the whole assembly just line back up perfectly when you fasten it to the swingarm? I took my front wheel off to install a steering damper and it seems I could be +\- .25” in either direction which could affect brake rotor movement as well.

I found a 13/16th AF socket was a better fit on the axle nuts that the 21mm. Thanks for the video, very helpful indeed.

Very useful video ！！！please don‘t delete it I gonna change mine soon🥲🥲🥲

Thx's got there in the end

Good video. I would like to know how you adjust the suspension. What is the tool needed and do you need to remove the rear wheel to do so? Thanks, Frank

nice tutorial

Thank you for a great video. I have great use of it at the moment. I punktured my rear tire after just 20 km. My bad. I should have pumped the tire harder from the start. I wonder, where do you buy a new tube for vsett 10+? And i also wonder if you have a pump to recommend? Thank you again.

Good video

Is it really necessary to go through all this steps just to replace a tube? I'm a newbie to this kind of handy stuff and I don't even have the required tools/glues.

That's an odd split rim! Mine the tires just pop off the opposite side. So it's not stuck on the engine wire. That's a dumb design

Does anyone know where to source the button head screws to the rotor? 3 of mine came stripped with a bent rotor so after I find a way to get them out I'll need more.

At the moment i own a zero 10 x Love it! But i need more range! Would you recommend the vsett 10+R a must upgrade???

this is great thanks so much! how would you say this compares to the wolf warrior?

do guys know the torque specs for 19mm nut on swing arm is it the same as the 21mm nut? 50ftlbs?

Hey. Could you make this same guide for the Vsett 11+ / Super 72? Thx.

awesome ide with rimm you dont need press or nothing !

I noticed the motor cable just clips to the frame. Do you have any concern for damage with the wire being exposed ?

This video in its entirety is LITTER 🔥 than the ☀ Great job T‼️

I hope you make video changing the bearings

tyres on the spit rim types are super easy, most struggle with the ninebot, m365 tyres

You take the brake disc off to protect it, right? In the case why not just loosen the split rim bolts a little while the wheel is still mounted? Then change the tire and tube, put the split rim back finger tight, replace the wheel and then torque up the bolts when the wheel is back in.

is it possible to switch to solid rubber tires?

Hello, greetings from Chile, sorry for the translation. How much torque in NM do you give to each part, brake disc, wheel motor, and wheel bolts?

Hi guys just a quick question. If I was out and I happened to get a puncture would I be able to use the green slime preventer (green goo) as a temporary fix? Tia

hi! nice video. where did you find that working bench? i need one exactly like that. thanks.

Thank you very much for your video !! Could you make a video , showing how to change the suspension for the Vsett 10 ( rear and front ) please?? 🙏🙏 I would like to put air shock one but I am very bad at mechanic … 👍👍

I have a Vsett 10+ and in my p settings the tire diameter is set to 10 in. I'm hearing that if I set to 9.8 let's speedometer will be more accurate. Also if I change the number of magnets from 28, to the proper 30 it will help the speedo be more accurate. Any advice?

Would you say that all the hex bolts on the scooter should be tightened to the 5nm??

my rear tire is flat and the slime is getting out of the tube i am on my way to a friends garage and use your video step by step and try to change it i´ll will write you later how it went greetings from Cologne Germany

Is the 40 ft lbs you used for this on the wheel lugs the same for the Vsett 11+?

Hi! I tried to change to semi off road 10x3 tyres but the screws cant reach all the way. Do I have to buy longer screws or go back to the slippery PMT's? :/

What are the measurements of the camera because I changed it and there have been two punctures already?

Sorry for the noob question but what that tool with the 5 newtons that you use?

what is that hand green/teal hand drill for fixing screws? link on it?

hi friend. what is the name of that glue to fix the rubber shields on the nuts?.. thanks 👍

Can everyone help me determine why my tire went flat last night. I was riding normal going down a residential street when all of a sudden my back tire kind of did a drift and that's how I found it was flat. Luckily I was not going 40 when it happened. Anyway I got back home checked the tire and there was no puncture marks or any nails or sharp objects so the problem had to be the tube. I squeezed some green tire slime into the tube and aired it up to find out it was oozing out everywhere but im still baffled as to how it happened. Will a hot motor do something like this because it was pretty warm? Or anyone have any ideas?

Can you link the tools you used please?

hello. what is the size of the tube for vsett10+ some guys told me its 10x2.5, the shop that i bought it told its 10x2 lol! im confuse thanks

Hi... Is it possible to apply sealant liquid inside the tire to avoid punctures? 🤔

I made it until detaching the wheel. But the 6 Screws, that locks the wheel (4:13). They are fastened so strongly, that i already broke one screwdriver while trying to loosen them. I tried warm water and oil to make it easier but it wont come off at all... Any ideas what else i can do?

Dude Got my first puncture today and this well presented video made fixing it a breeze [RU-vid] isn’t completely useless after all 💁‍♂️ Thankyou for putting this out there 👍

Great video! I have a question for anybody with experience on this scooter, I'm 240lbs would you go with the bulkier vsett 11+ that's rated for higher rider weight? 330lbs compared to 285lbs

Thanks

Please tell me where you guys get replacement bolts for the Vsett? I lost the split hub black bolts, anyone know the size of these things and where can I find replacement bolts..????HELPPPPP !

does it have a connection that i can unplug it to the contoller?

Should the tire be able to move when reattaching the brake to the rotor?

Bonjour à combien de newton-metre serrez vous toutes vos vis ? s'il vous plaît merci.

Tyler what is the exact screw size for the disc brake rotor and split rim? Also why don't retailers make information like that known so we can buy more in case of stripping?

I'm having major issues with my vsett 10+, first the trigger throttle stopping working, then under warranty I got a new one, now, after installed only the front motor works, ive check the wiring connection, all looks good, spent a lot of money on this, its had more down time then running time, now the rear motor doesn't work , any ideas?

This makes the decision of a rougher ride on solid tires for me. What a nightmare! I'm just gonna deal with the slightly poorer suspension and grip.

Can gou guys able to oder more of vsett 10+,kaabo wolf warriors models as only scooter is such hard to fund its all zold of off any online scooters stores in any local states

Tyler is sooooo cute!!!!

I bored out one of the rotor screws and it was an absolute pain in the ass to get out. It took me like 4 months to figure out how to get it out but I finally removed it today. I used a flat head bit and a 22mm socket and banged it out like a chisel. Do not strip those heads

Hey I ordered a vsett 10 will the scooter come with all the torque specs in the Manual ?

Isn't it possible to disconnect the motor cable so you don't need to force the tire over the rim?

I dread needing to change a tire on this bad boy. Geez

Hi, thank you for this video. What glue for screw-thread you use?

whats that spray youre using on tire and tube before install, and why?

Ima use permatex it should be good

That's a lot of work to change a tube or tire. I hope I never get caught with a flat half way though my journey.

One bolt is broken and im like thinking i need a welders help, the bolts used are just so soft

Anybody know where he got the platform with hole in the center ?

Is this guide also applicable to vsett 9+?

why are there inner tubes inside of pneumatic tyres?

Was that an editing error? at ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9anfrnhcgRs.html you started to do the front wheel but only unwrapped the cabling and rewrapped it.

Is tightening your wheel to 54Nm good idea? thank you

Im able to order this threw your company?

thanks for this, i just got put off buying the vsett, just like apollo scooters with junk tires.....oh well back to reconsidering the emove