VW/Audi DISABLE DOOR CHIME using VCDS (VAG-COM) 

Glad to hear that :)

On the field New value, I change the "1" to "0". You can see the change being made exactly at 1:30.

Hm, it can be retrofitted on the older models (I had it retrofitted on my A6 4F some time ago) so for sure can be done and on the newer platforms, but it will not be easy as there are SFD unlock required for almost all coding and adaptation changes made to the ECUs.

Great, thanks for the feedback!

Hello The, procedure is the same but most probably you will need to unlock it first. The work is possible currently only with OBD 11

Where do you put it? Does the adaptation window looks the same as in the video?

@@pavelppp888 Yes exactly the same

I put it in exactly the same as you I just get a message along the top where yours says na accross the 4 boxes mine says channel not available

Hm, interesting. I need to check it on B8 vehicle

Also no chanel 98 and long cose also not Work ​@@pavelppp888

as mentioned below, It should be in the BCM module, but I am not sure where exactly. And the newer platforms probably will not be possible to do this because of the SFD unlock required.

Hello, Of course, you can! You just have to follow the respective settings in the obv11 interface. The setting being changed at the end are the same for obd11 and VCDS - they are the same as the OEM diag tool - Odis.

​@@pavelppp888 hello I just tried with obd11 but unfortunately I wasn't able to find the corresponding parameters neither identify the correct section (what does "Central conv." stand for? There is "central electrics" section but the corresponding hex code is not 46 - but wait: I'm applying to a vw e-up 2020 maybe that's why?)

It should be in the BCM module, but I am not sure where exactly. And the newer platforms probably will not be possible to do this because of the SFD unlock required.

Yep, you may need a security access (SFD unlock) but with OBD11 that can be unlocked and the procedure carried out

@@pavelppp888 OBD11 recevied, change performed, I will test tomorrow.

What is showing when you type 98 and hit enter?

@@pavelppp888 Just "ERROR Channel 98 Not Available"

@@Kernel71are you sure that you don’t have a adaptation protection currently on? You can check in Security access window.

@@pavelppp888 Don't have code 98 also (A7/S7 2012) only "ERROR Channel 98 Not Available"

@ Did you manage to get past this?