VW Golf Jetta Mk4 Door Lock Module Removal

Подписаться 130 тыс.

Просмотров 975 тыс.

50% 1

VW Golf Window Glass Removal
VW Golf Door Module Removal
VW Golf Window Motor & Mechanism Removal
VW Golf Door Strip Down
If you would like to donate to the channel, please click here:
www.paypal.com/cgi-bin/webscr...
CLICK THE LINK TO BUY THE INTRO SONG : shop.bmacvags.com/collections/...
Disclaimer:
Use this video at your own risk. BMAC VAGS holds no responsibilities nor liablities for the use of this video.
BMACVAGS cannot guarantee against unauthorized modifications of this information, or improper use of this information. BMACVAGS assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. BMACVAGS recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of BMACVAGS, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not BMACVAGS. Be safe and good luck.

Авто/Мото

Опубликовано:

26 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 294

@L_M_C 8 лет назад

You're my 'go-to' guy for anything Golf Mk4 related. Cheers.

@jamesmorton-m6tzo396 Год назад

BMAC to the rescue yet again... You can tell he is a VW guy because he has made a video about how to sort out all the issues that have cropped up in my MK4 Gti ....

@Balooz 9 лет назад

Watched this and changed my door locks in 75 minutes, never done it before and your video was spot on, thanks very much.

@NakituMinayashi 10 лет назад

This was really helpful! Thanks! Some advice to other (less experienced) viewers like myself: learn from others mistakes! After removing the window motor, I pushed in the back side of the motor holder and it fell apart, unwinding all the wires from the window lift... I was pissing blood until I finally managed to put it back together... So, do not take the window motor apart unless it is completely necessary! As mentioned in the video, it is not necessary to remove it to get to the locking mechanism! If I'm a dumbass that does not mean you have to be one too ;)

@BMACVAGS 10 лет назад

Glad i could help you.

@BMACVAGS 11 лет назад

Glad I could help, thank you for your kind comments

@lukelbd_ 5 лет назад

I got the bolts out, couldn't for the life of me figure out why the thing was still stuck on after watching like 5 other youtube videos that glazed over the whole "pry it off with a lever" bit. Your video saved me. Thanks a lot!

@TranceDjF Год назад

Best door lock vid I've found on RU-vid, clear ,concise ,spot on thanks

@BMACVAGS 11 лет назад

Ok, quite alot of information there. First make sure the door is fully functioning with out the door panel. Make sure everything moves as it should and there are no restrictions, check the metal rod moves up and down freely. Then put it back together with making sure you are not bending or stressing any part of the moving mechanism.

@trombonegirl64 9 лет назад

Thanks for taking the time to make these videos to help us all. :-)

@ollydavis5702 3 года назад

Got to replace this on my golf tomorrow and this video couldn’t of been more helpful, great work, very informative 😀😀😀

@BMACVAGS 11 лет назад

First point of reference is the key lock, I would suggest remove the key lock and inspect it. Put the key in and make sure it is working as it should. Next get a flat screwdriver and put it in the slot of the module. Twist it both ways clockwise and anti-clockwise, it is possible you could have inserted the key lock in while the module is already in the lock position. I hope this message makes sense, let me know how you get on.

@vincent70 10 лет назад

One of my new favourite you-tubes..good stuff for us VW owners!

@Nickyb2010 8 лет назад

yet again you have a video of what im looking for cheers dude

@andreaedwards1931 4 года назад

this channel is absolutely amazing!! i wish you were around 15 years ago lol it would've saved me alot of guessing and trial and error!! lol

@TheEnormoose 10 лет назад

How have I not found your vids before?! Great Vids and great work.

@BMACVAGS 10 лет назад

Thank you, at least you are here now

@simonquintrell8686 9 лет назад

Great video, I'm about to replace my door lock module and this has be invaluable.

@RGS243 10 лет назад

Hey man, your videos are great , so easy to follow too. They've helped me out alot. Keep up the good work 👍

@MrDarren192 10 лет назад

great demo, just replaced my lock unit, should of tried the repair first, got the lock unit out with out taking the key barrel out, just realest the cable from the back from the pull handle , really helpful thanks

@DesignPixelmaster 10 лет назад

great videos helped me a lot. thank you!!! :)

@ElliHoy 4 года назад

You are a good man for making these vids much appreciated

@CRSBCN 9 лет назад

Hi!! Great tutorial, but there are two points that can make easier the disassembly if you only have to repair door lock or lifter parts. Just move down glass matching the screws with panel holes, unscrew it, and manually move the glass to the top of the window. Now you can hold the glass on top side with a few tape stripes. Ther'es no need to separate interior panel from door lock. I think it's better to remove the 2 parts togheter, without holing the plastic tips. Frist unscrew all parts, unplug all electric and mechanic wires, and let it out. You'll find more easy to put back on all togheter (specially to center the side lock bolts) Greets from Spain and sorry for my english!!

@intercitty 9 лет назад

was looking for this. didnt feel like taking the whole window out

@markweeks7548 9 лет назад

So i forgot how to take the lock module out againg and boom quick flick thru your channel and once again i fing your a life saver

@pinkhaspinkhasov6561 9 лет назад

Thank you so much for making this video. It helped me out alot. keep up the great work and videos

@jakehawat 9 лет назад

Great stuff, extremely helpful!

@ed1777 9 лет назад

Thanks...!! I really appreciate your videos....!! They ´re very useful!! Now I can fix my door sensor!! Once again... thanks!! Greetings fron Costa Rica!!!

@saltire546 6 лет назад

Thanks for sharing this video its folks like you that help loads of folks and save them money.I f you just need to replace the cable just remove the 2 main door lock ones , i did also loosen the door barrel one slightly .Also no need to remove the glass just tape it up . Once the cable has been fitted to the lock and you are just about to fit the outer door panel the cable is a bit of a nightmare to fit its easier if you put the window down and do it from the outside with a helper holding the door panel .

@MrLuistercio 10 лет назад

Thanks for help me, great video!

@PsychoDogBeast 3 года назад

Great video mate. Cheers for posting.

@BMACVAGS 11 лет назад

Thanks for that

@blainewalter8933 7 лет назад

Youre awesome! Always super helpful. Thanks again!

@abdielo35 10 лет назад

Thanks for the great explanations greetings from Panama

@ChristianBiggins 10 лет назад

Another great video, thank you.

@BMACVAGS 11 лет назад

Appreciate that

@wernerlomker4396 10 лет назад

Fantastik vids. Very helpful, even for those who do this everyday.

@Pieter777able 10 лет назад

Great I stripped it previously but had to knock out the centre pin that holds the window frome. Was very hard. Your method is much better

@rookieg 6 лет назад

Very helpful video, thanks for posting it.

@Kriexpres 8 лет назад

so if i want to change just micro switch in door lock witch indicate door open/close i must disassembly entire door? (glass, glass motor,....).

@migueltorres79 11 месяцев назад

Great video. Thanks

@BMACVAGS 11 лет назад

when you say lock, do you mean the key lock or the locking mechanism?

@benjokazooie 10 лет назад

another great video. will be replacing my door soon. so all these door vids are brilliant!

@BMACVAGS 10 лет назад

Thank you for the support

@ssung5830 10 лет назад

Thanks man for this great videos, I fixed my look door learning from it. Hugs from Chile ;)

@BMACVAGS 10 лет назад

Thank You for taking the time to comment.

@BMACVAGS 11 лет назад

which locker do you mean? The Key one or the mechanism part?

@ruthlessandevil 9 лет назад

Mate you uploading this video made my fucking weekend so much easier. Proper nice one.

@BMACVAGS 11 лет назад

Its the screw that you used it release it, if it is in the wrong position it will not fit properly. You have to adjust the screw out until it fits

@Mikex08 10 лет назад

Nice DIY dude, both the locks on my MK4 have gone so my central locking doesn't work, I'll be using this so I can repair them.

@BMACVAGS 10 лет назад

Excellent, I will have new replacement modules in stock shortly in case you want to buy one instead of repairing it.

@wagstaffphilip 10 лет назад

Excellent vid. Explains a lot.

@BMACVAGS 11 лет назад

When I get a chance I will try and make one for you.

@mujjuman 7 лет назад

Excellent. Thank you

@kbrooks7823 10 лет назад

Thank you. Extremely helpful.

@bowlinglee 10 лет назад

Many thanks. Helped a lot. Cheers. Lee

@BMACVAGS 10 лет назад

Glad I could help, have you subscribed?

@jonv78 10 лет назад

Great video, thanx!:)

@BMACVAGS 11 лет назад

Ok, I take it you replaced the door lock module, if so did you check that it was working before you installed it?

@howardtrice477 7 лет назад

My son and I worked on this most of the day. Followed the steps given here that were helpful, but left gaps when you run into trouble. Like the arm that pops into the inner support was cracked. We just left it off. No pop rivet needed. Then the unit would not seat properly with the outside lock cylinder. We removed the lock cylinder and mounted the new latch. When putting the cylinder back in, the stupid Ring that locks the cylinder back down decided to come off and fall to the bottom of the door. Now the bottom of the door is like something designed from hell. It took me with a tripod with a led light taped to it's camera mount and a hand held mirror and a coat hanger to fish this ring out!! You have to position the light just right reflecting off the mirror to reflect the light down the door to the bottom. Just using a flashlight by itself will never work!! It took over one hour to accomplish this one task!! This door is the most over-engineered piece of work I have ever worked on!! My old 1971 Type three is much easier to work on and replace parts off of!!

@jungle7dnb816 10 лет назад

great job my friend.thanks a lot!

@BMACVAGS 10 лет назад

no problem, make sure to subscribe for more vids

@Jordan-df3gt 11 лет назад

Alright mate, I fixed it the weekend. bought a full set, i think it was size 8 if I remember right. lol

@luciano7436 7 лет назад

muito bom ,eu precisava retirar o vídeo e o tutorial me ajudou muito !!

@igorbentes101010 8 лет назад

the best video of youtube

@smokelesscoal 4 года назад

Hi there, thanks so much for making these very helpful videos! I have a question - is it necessary to remove the glass to remove the door latch? Mine has died and I'd rather not have to take the glass out to replace the latch. Thanks very much!

@pv5363 10 лет назад

great vid helps alot do you know how i would find out if my car came with remote central locking as it only came with one key its a 2000 golf s tdi cheers

@Alckus 10 лет назад

Un video davvero illustrativo, bravo :)

@BMACVAGS 10 лет назад

Thank You

@asdqweqkdkas 9 лет назад

So to remove my front window i just need to remove those 2 screws and take it out? Video is really helpful, thanks!

@BMACVAGS 11 лет назад

The window removal was for illustration purpose only, you can do it without removing the door glass

@RoryEaton 10 лет назад

Spot on mate.

@DyudyukVitaliy 10 лет назад

Дякую! Дуже докладно.

@sneaks01 6 лет назад

Great vids!! You just saved me a ton of $$

@ajkas123 7 лет назад

Hi great tutorial, however how do you release the 2 lock module pins from panel - do they just push out or do you have to drill them out - whichever and then how do you secure them once door panel is replaced

@BMACVAGS 10 лет назад

No problem

@TheSkinheadlad 10 лет назад

Great video, helped a lot

@Allantoss 10 лет назад

Thanks bruv this really helped. I'm guessing this is how to fix door sensor and key sensor?

@paulwilliams8108 11 лет назад

hi great helpful videos ..just to clarify if i leave the glass in should i wedge it in place..also is it the same procedure for drivers door?

@squeak1412 9 лет назад

very helpful video many thanks

@cristo976 10 лет назад

Very helpful and clear videos dude. keep it up..Subbed..

@BMACVAGS 10 лет назад

Thanks man

@deandoe5849 3 года назад

Great video... helped me a lot. Thanks

@douglasmills6326 5 лет назад

brilliant videos u do keep it up helped my loads of time s ur the man

@Cnc1073 9 лет назад

Great video thanks

@sierraoscar9530 10 лет назад

Identical to the Leon and Toledo Nice video thanks

@BMACVAGS 10 лет назад

No problem

@hibridradio 8 лет назад

muchas gracias sus videos son de mucha ayuda...

@andypembroke594 10 лет назад

Hey, thanks for the video. I don't suppose you have a video or even any advice on how to replace a BORA front right side door lock cable on a Golf MK4?

@kewaynedysonsr.6577 6 лет назад

What size triple square did you use to take out the acurator/module?

@magnificent10304 10 лет назад

Thanks dude, mines went out yesterday, this will make it easy for me, ill first jus check it to make sure thats the prob

@jungle7dnb816 10 лет назад

great job my friend.thanks.

@BMACVAGS 10 лет назад

No prbolem, be sure to subscribe

@disavowed001 10 лет назад

Must say very nice demonstration... Thanks... U may know and help me for this ? I have passat caravan year 2000 my problem is when i try to open the door just with key (without remote) everything is fine all doors unlock, but when I try to lock only one door are lock just driver door are lock ? With the same door have another problem when i open inside light does not turn on what can be the problem please tell me if u know ??? All works fine before start to rain about 3-5 days continuous... Please help...

@ELRAPIDO4KVS 3 года назад

BROVO, good job👍👍👍👍🤙

@BMACVAGS 3 года назад

Thank you

@nainka11 4 года назад

Well done and Thanks

@petrakemkova2739 10 лет назад

Hello, It's really great videos, very heplfull. Thanks! I have a question.. today we were fixing my VW polo 2003 door power window regulator, motor was ok, just this plastic parts broke. We were removing the whole window mechanism. It all went ok, window is fixed and nicely working, but there is one small detail. Once we closed the door, I can't open them again. Can you help? We probably missed something, but apart of that, is there a way how to open it? Thanks..

@ThatRandomGirlDoesArt 9 лет назад

Mine did the exact same on my Seat Leon!! Aaarrrgggggh

@0sinnbadd0 10 лет назад

Thanks for very nice videos!! Now I know how to repair my door handle :o)

@BMACVAGS 10 лет назад

Excellent, Good luck and make sure to subscribe

@martinbloggs3126 10 лет назад

Hi, great video, very well done. I need to inspect and possibly repair the passenger door side lock - it is very intermittent in operation. Can you tell me please what the 'spline tool' is that you used near the end of the procedure to get the lock itself out? I have been to Halfords but they do not seem to have what is required - they have hex drive and torx, but nothing like what you used in the video. They were being very helpful, came outside and looked at the car itself, but we were all just 'stumped' as to what this tool is, and what size it is even if we knew what it was. So could you let me know what it is and where I might be able to buy one on the High St. My 2003 GTIPDI does not actually have an external key lock on the front passenger door, do you think I have a blank plastic piece fitted? (it looks as though I do) and I expect I can gently ease it out as if it was actually an external key lock module. Sorry for the long post, well done again.

@mkean1988 7 лет назад

your videos have been a great help thank you bmac.. could a faulty micro switch in the door lock module cause a power drain on the battery?

@Godsadvoc8 8 лет назад

Yes blood, Is it an M8 Spline socket for all mk4's up to 2004. Many thanks. Obviously for those 2 holding the lock mech to the door.

@brucealec 7 дней назад

Great video! Is it correct that you need to colour match the plastic of the module? i.e. get an all black to replace all black or black and white?

@rhineman 9 лет назад

Thanks for this. My front driver side door is giving a false door open signal. I was thinking of replacing it myself but had no idea you had to remove practically everything on the door in order to get to the door module itself. Not gonna happen in this summer heat. Mind posting how long the whole job took you, as well as putting it back together, in order to estimate shop charges?

@aladinhadzic334 2 года назад

here i am 6 years later, asking myself this very same question about time, so mad no one replied to you

@summersubstructures 2 года назад

@@aladinhadzic334 Have you done it yet? I was going to do it today but that seems like a lot of work, we'll see.

@davidcaffery8347 10 лет назад

thanks for the reply, the door handle just seems loose and will swing out all the way but have no affect on the mechanism, its as if it is loose, how can I tighten/slacken the pulley cable if it is this?

@randomeddy 11 лет назад

Very helpful,thanks. My window mech' wont pull the window down to get to the two window screws?

@davesmith7671 5 лет назад

Just wanted to check is this the same for the polo 9n 2002 at all ? I need to get the door lock module out tried today and found that I couldn't remove it due to the glass . Is this the same steps I would need to take on that too ?

@MrDjcali73 8 лет назад

Can you make a video about removing the entire door please.. I have to swap my driver door.. and I'm confused about the wiring.. thanks and grate video's

@cybeer67 4 года назад

THANK YOU !!

@3mariusx 7 лет назад

what are those rubber things for ? the one at the lever that goes up and down when opening closing and the one at the lever that you pull to open the door. My vw has both of them small size like the one you have at the opening lever. The rubber from my car is damaged at the up/down lever. Should i cange it? From what i saw the door lock module is water proof and the only purpose that i see of this rubbers is to protect the levers from touching the metal parts. What do you think?

@BruceBaxter518 10 лет назад

That's a very nice video, as well as the one to disassemble the electronic portion and repair. It's a shame my lock rod mount is hosed and I need to replace the module.