Step by step process on how to take the rear bumper off a VW T 5.1 Transporter Multivan. Here I show how to take it off and repair a VW T5 T6 split bumper.
Thanks for this bud. Just a couple of notes (and these might be model specific - I’m running a t5.1 Caravelle LWB); under the wheel arch liners I found another T20 screw each side, about 30mm higher than the top arch liner screw. Got to it easy enough by bending the wheel arch out of the way a bit. Thinking they might have been missing from yours as they screw into the bit of black plastic that leapt for freedom as the bumper came away on the passenger side. Also, my van had two additional plastic screw thingies hidden under the small plastic rear corner panel. Easy enough to spot, but they weren’t there on your van so I thought I’d let you (others?) know. Thanks again for taking the time for the video, and all the others! Makes my life soooo much easier 😂
Thanks, I just have one little problem. Those plastics screws (time 2:18) are impossible to unscrew, because they're old and dirty. Is there any trick for it?
You can get a flat screw driver and jam in the hole and twist it like that. You’ll need new ones to replace. Hope this help. Let’s us know how you get on. You can’t do it 👍
Another option is to wind in a woodscrew about 2/3 turns and pull the screw with molegrips and the whole plastic fitting pops right out in a one-r@@YoucandoitwithJules
