Wabco Air Suspension Compressor Piston Ring Seal Repair Fix Kit (Fits Audi Allroad + others)

Подписаться 13 тыс.

Просмотров 103 тыс.

50% 1

Link to purchase Wabco kits: x8r.co.uk/search/?cat=0&q=wab...
Symptoms of fault
Noisy suspension? Is your vehicles air suspension rising slowly or perhaps failing to rise at all? Red Air Suspension Light lit? 1772 - Pressure problems, 1400 - Control position not adjustable, 1577 - Can't raise, errors shown?
The fault
The piston ring within your vehicles EAS air compressor is worn reducing output significantly.
The poor quality piston ring within your air suspensions compressor wears over time causing these symptoms. The piston ring within the compressor unit of your air suspension system deteriorates over time, the OEM piston ring is made from a soft plastic that wears quickly, this wear substantially reduces the output of your compressor leading to noisy, slow rising or non-rising suspension.
The solution
Fit our improved design PTFE piston ring and restore your compressor to full health!
Simply install our replacement PTFE piston ring and restore your compressor, full instructions are included to guide you through this simple process which should take under 30 minutes. Our item is made from PTFE which has far superior wear resistance compared to the OEM part providing a permanent fix to the problems with your compressor.
Vehicles affected
Audi allroad C5 models 2000-2005 C6 model 2006-2011
Audi A8, D3, 4E models between 2002-2010
Audi Q7 2005-2013
BMW X5, E53 2000-2006
BMW 5 Series E39 1997-2008
BMW 7 series, E65 chassis 2002-2006
Jaguar XJ series models between 2003-2010
Landrover Discovery II models between 1998-2004
Land Rover Range Rover MK 3 - L322 between 2002-2005
Mercedes S Class 1998-2005 (w220)
Mercedes E Class 2002-2009 (w211)
Porsche Cayenne models between 2002-2010
VW Touareg 2002-2010
Associated part numbers, our kit will only repair Wabco compressors.
Official Compressor: RQG500110 (LR010375), RQG500140 (LR015089) Official Air Supply Unit: RQL000014 (37.22-6753864) Wabco: 415 403 300 0, 415 403 108 0. Official Compressor: RQG500130 Official Air Supply Unit: RQG100041 Wabco: 415 403 401 0, 415 403 925 2
You will receive
1x PTFE Piston ring
1x O shaped gasket o-ring
1x Shaped gasket o-ring
2x Screws
4x Cable ties

Авто/Мото

Опубликовано:

21 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 11

@jamiecowley5702 7 лет назад

I've just fitted a new piston ring and the plug in says it's producing 5.5 bar and the required is over 8 bar. the valve on top of the piston head is raised half a millimeter should that be flat? there's not much gap but could it be enough to lose that extra bit of pressure? many thanks

@kaibintech 4 года назад

Great video!

@thesetruths1404 2 года назад

I removed the Wabco Continental ZSB suspension compressor on my 2005 Audi Allroad. I have a hard and steady 01397 code failure indicating the N111 solenoid was bad. I didn't see any bad wiring anywhere, so I removed the compressor. How do I bench check this compressor to confirm it's bad? It seemed to be working fine before it failed suddenly as I was driving it. Over a week or so it sunk down evenly to the lowest stops on all fours wheels. When I disconnected the brown airline to it, air was released as of it was being stored well in the system. The numbers after Wabco are: 001 0424. Does this mean it was made on 2004? Thanks!

@langdont1 7 лет назад

My compressor comes on but wont shut off... I tested the relay and its working fine. Would you have any suggestions on what you think can cause this? Any input would really be appreciated. Thanks & great video! Also wanted to add, have no leaks in my system, as she stays up even when I pull the fuse to disengage the pump.

@X8RLtdUK 7 лет назад

If there is no leaks the compressor running on is often a symptom of a worn piston seal.

@senadheco7341 7 месяцев назад

Hello, as i can see you do not have conectors at the end of the cabeles. Where should i look for that parts. I would be realy thankfull If you help me. I’ve got audi a6 c7 2011 3.o

@X8RLtdUK 7 месяцев назад

Hi there, unfortunately we are not aware of where that part can be purchased. If it's available to buy separately they will have a part number printed on them, which you could search on eBay. - Georgina, X8R Ltd

@klintous 8 лет назад

I changed out the Rings and I still and getting the fault. Any suggestions?

@X8RLtdUK 8 лет назад

+klintous If the compressor was generating good output on bench, it can be a leak within the system. Please don't hesitate to contact us directly through email: Sales@x8r.co.uk Regards, The X8R -Team