Wastegate actuator - test

Подписаться 70 тыс.

Просмотров 70 тыс.

50% 1

Is wastegate actuator failure causing your car's lack of power?
A malfunctioning wastegate actuator won't regulate fumes going to the turbine. Although still driveable, this results in lack of power and acceleration which means the car is virtually unusable.
In this film I'll show you how to check easily whether or not the actuator is working.
***********************************
- If you enjoy my content and like to support me then I’d be so grateful for a virtual „coffee“. Any amount is welcome and goes a long way to keep me going. Thank you. www.buymeacoffee.com/knemo
- I'd love to hear your thoughts. Please comment, like and let me know what you'd like to see next.
Subscribe for the latest videos:
ru-vid.com?sub_confir...
#knemo #wastegateActuator #WastegateActuatorSkoda #skodaRoomster

Авто/Мото

Опубликовано:

12 май 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 64

@hinkozaman1749 Год назад

Amazing simple and straight to the point video perfectly done.

@RobotFX 3 года назад

Short and explicit. Very good

@k-nemo 3 года назад

Thank you

@kudandanga9400 4 года назад

Another quick one k-nemo, an d Merry Christmas lads, why does the actuator move when you use you hands (0.06) but doesn't when you rave the engine?

@niklasasplund5155 10 месяцев назад

Thanks a lot for the video! Appreciate if someone who did the swap themselves have a video to share. I got a 2012 Fabia (1.2TSI).

@k-nemo 10 месяцев назад

Thanks for watching.

@karelmekyna7216 7 месяцев назад

hello, perfect video, I just miss how you replaced the actuator.. turbo out or just the actuator? and was calibration needed in the service? many thanks

@martamykhailyna300 2 года назад

Hi!) Do you know pressure at which the actuator operates?

@davidadey8181 Год назад

I think this is most informative thank you. Im struggling with removing the heat shield, is there a specific method please.

@niklasasplund5155 10 месяцев назад

Seems a bit tricky and some sensor in the way, did you find a way or even a video?

@godowskie 10 месяцев назад

is there any increased oil consumption?

@CoreMaster111 3 года назад

Mine is starting to go out. That rod rattles back and fourth easily. No warning lights or codes just yet.

@dexxie77 2 месяца назад

Hi first thanx for this vid my actuator doesnt move much what is a normal ammoint it has to move? And i only got the p155a code and my 2 map sensors are renewed can i change the wastegat actuator or do i have to lear new pressure hope to hear u thanx a lot

@michalgoes 4 года назад

I guess this is 1.2 tsi engine by VW-group. Thanks for this film. Now I understand how it should work. Is this turbo the wastegate-type or variable-geometry one?

@k-nemo 4 года назад

Yes, it's VW group engine. Wastegate type.

@michalgoes 4 года назад

@@k-nemo I got this engine in my Skoda Fabia

@minibotpc 4 года назад

Hi where did you buy the replacement part from?

@k-nemo 4 года назад

From a dealer

@andreiASK 3 года назад

Same problem with my Skoda Rapid 1.2 tsi (CBZB) . when i start the engine the actuater doesnt move. When i push the gas pedal doesnt move. The epc and check engine its lights on.

@k-nemo 3 года назад

It seems like it

@andreiASK 3 года назад

I’ve changed today that wastegate actuato, and all the problema has gone. Thanks for the video 🙏

@nickvoulgeng 3 года назад

@@andreiASK did you do it yourself or in a dealer - same problem here

@evenimentemanele 2 года назад

@@andreiASK ai calibrat actuatorul dupa schimbare ?

@aitchthegamer581 3 года назад

Does the actuator need to be programmed in or calibrated? If so how can it be done....thanks

@k-nemo 3 года назад

Should be calibrated. Unfortunately this was done by someone else.

@aitchthegamer581 3 года назад

@@k-nemo ah ok, do you know if it was just a case of replacing the part and no additional calibration is required?

@turkishf16jet13 Месяц назад

IF YOU DON'T WANT TO GIVE MONEY FOR CALIBRATION, JUST TURN ON AND OFF IGNITION 15 TIMES, AND THEN START YOUR CAR AND THE EPC LIGHT WILL GONE 😉 THANK ME LATER

@rudolfhorvat4241 Год назад

Přesně toto mě trápí 🥺😭😭😭

@iragubenko4815 4 года назад

Hey i have Malibu 2.0 does the wastegate suppose to move when u start the car

@k-nemo 4 года назад

Yes, it does.

@iragubenko4815 4 года назад

@@k-nemo mine doesnt move which means i have to replace it ? or there is any way to fix thanks in advance

@JohnWalker-bj3jb 3 года назад

@@iragubenko4815 mate did you sorted?

@maxyang285 Год назад

Hi ,how do you find this parts error? Does get some error code?

@k-nemo Год назад

I wrote in the description for the film.

@dominicsach 2 года назад

Hi, my vw 1.2 tsi wastegate actuator moves once or twice when i rev the engine. after that it stays in one position. no warning lights yet. When i try to move the rod with my had i see the same thing. it doesnt always come back to normal position. could it be actuator issue or the valve itself. any advice?

@k-nemo 2 года назад

If it malfunctioned there would be a noticeable drop in power when driving.

@dominicsach 2 года назад

@@k-nemo i tried the calibration method by turning the ignition on and off several times and found the actuator is moving like normal. Just found on another thread about someone with a similar problem i am facing. I have a slight drop in power only when trying to go uphill which is accompanied by vibrations too. and a continuous rattling while the engine is in the 1.5 to 2.5 rev range. the rattle is absent when i press the accelerator softly though. i was thinking wastegate problem or a boost leak.

@xproflipscarab 8 месяцев назад

@@dominicsachdid you ever get to the bottom of this? I'm currently experiencing the same issues you have

@dominicsach 8 месяцев назад

Hi, so my wastegate was functioning normally. That movement was the system self check as I understood after checking with my car mechanic. My issue was with the flywheel. Had to have it replaced and that fixed my issue.

@brunoprevitali8833 6 месяцев назад

@@dominicsach this is very interesting since I have the same problem ( a continuous rattling while the engine is in the 1.5 to 2.5 rev range) and nothing when the accelerator is not pressed. No light or any failure but my actuator is not moving at all when I accelerate. What did you change at the end ? (the flywheel ?? ) many thansks in advance for any firther help !

@Heijmen0481 2 месяца назад

How to replace it?

@israelballeza1289 3 года назад

¿Donde lo compraste?, no lo consigo yo. :(

@k-nemo 3 года назад

Lo compré en el concesionario Skoda. Pero necesita calibración

@kudandanga9400 4 года назад

My car is doing exactly the same thing, but the mechanics insist the actuator is fine. When you move by hand it goes back and forth, but when you start the engine it only moves once then locks in position. He tried to calibrate it and it only goes to 77% but when the turbo is not connected it goes to 95% and advice? Please!!!

@k-nemo 4 года назад

When you press accelerator at the engine changes speed actuator should move.

@kudandanga9400 4 года назад

@@k-nemo Thanks for your reply man, I will be meeting with the mechanic later on today (5pm C.A.T) so will let you know what happens after that. Enjoy

@ivicaconev5221 4 года назад

@@kudandanga9400 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NxZx8nl1BcE.html

@JohnWalker-bj3jb 3 года назад

Hello mate did you sorted? I have the same

@kudandanga9400 3 года назад

@@JohnWalker-bj3jb Are you experiencing actuator problems. In my case in turn out to be the turbo so I replaced it with a good second hand from the car breakers.

@johnmcguigan656 2 года назад

you should give commentary on it its self explanatory though

@k-nemo 2 года назад

I'm sorry to hear my video wasn't helpful. I'm sure you'll find a lot of videos with commentary in English

@paveltarasenko5486 Год назад

were there any mistakes?

@k-nemo Год назад

I wrote in the description for the film.

@simonattard7392 5 лет назад

Hi did u have to get the actuator calibration to the the turbo or did it just for ok after fitting

@k-nemo 5 лет назад

I've only made the film to show if the actuator works or not. The old actuator didn't move at all. The part was actually changed in the garage so I'm sure if they calibrated it. But I've read it's necessary.

@simonattard7392 5 лет назад

Thank for you reply going to test mine tomorrow as car keeps going into limp mode

@k-nemo 5 лет назад

Good luck

@trapezinski Год назад

@@simonattard7392 Did you replaced it?

@edwing60 5 месяцев назад

not really impressed, there is a lot more to it than just mounting also has to be learned, I don't see that in the film

@turkishf16jet13 Месяц назад

FOR ALL OF YOU WHO DON'T WANT TO GIVE MONEY FOR CALIBRATION, JUST TURN ON AND OFF IGNITION 15 TIMES, AND THEN START YOUR CAR AND THE EPC LIGHT WILL GONE 😉 THANK ME LATER (THIS WORKS ON MY SEAT IBIZA 1.2 TSI)