Тёмный

Water tank level monitoring system with Nodemcu and Blynk application - [ESP8266 Project] 

SriTu Hobby
Подписаться 72 тыс.
Просмотров 198 тыс.
50% 1

Hello guys, This video includes how to make a water level monitoring system using the Nodemcu board and Blynk application.
OK enjoy it now.
Short and sweet tutorial.Only from SriTu tech. If you think this video is good, don't forget to like and comment.
Water tank level monitoring system with Nodemcu and Blynk application - [ESP8266 Project]
• Water tank level monit...
Water Level Nodemcu
***Names of components.
***step by step.
***With code.
Subscribe to more videos --- / sritutech_sritu_hobby
Website for more tutorial --- www.srituhobby.com
Android app for more tutorial --- bit.ly/3GWcmmD
Our store with the best prices
========================================
srituhobby.com/shop
========================================
( Source code and circuit diagram )
=========================================
bit.ly/3GWcmmD
=========================================
Part's List (Our store -- SriTu Hobby)
==========================================
1.Nodemcu board x 1 -- bit.ly/4460nNI
2.Relay module x 1 --- bit.ly/40xyEDw
3.Jumper wires. --- bit.ly/43V7gSR
4.Breadboard x 1 -- bit.ly/3NaJ1uh
5.LCD display x 1 -- bit.ly/40u3pcO
6.I2C module x 1 -- bit.ly/3oDXtjV
==========================================
Part's List (Amazon)
==========================================
1.Nodemcu board x 1 -- amzn.to/3hwqG7v
2.Relay module x 1 --- amzn.to/2FqK9Jv
3.Jumper wires. -- amzn.to/3k9ZnkT
4.Breadboard x 1 --- amzn.to/35rdMVE
5.LCD display x 1 -- amzn.to/3isdBgz
6.I2C module x 1 -- amzn.to/3hqY5jC
7.Ultrasonic sensor x 1 -- amzn.to/3gLCkRj
==========================================
( Social media links )
==========================================
Facebook-------- / srituhobby
Twitter------------- / sritu_hobby
Instagram------- / sritu_hobby
Pinterest--------- / sritu_hobby
Tiktok------------- / sritu_hobby
Reddit------------- / sritu_tech
Linkedin----------- / sritu-hobby
Snapchat-------- / srituhobby
Threads---------www.threads.net/sritu_hobby
==========================================
Thanks for watching......................
If you learned something in this video,
**Like.
**Share.
**Subscribe.
What do you think? please comment below.
#SriTu_Tech_Nodemcu #Waterlevel #Blynk

Наука

Опубликовано:

 

19 дек 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 290   
@RajeshJaswalPune
@RajeshJaswalPune 3 года назад
Hi SriTu Tech, HC-SR04 or JSN-SRT04T etc work on 5v & so are its logic levels. MCU8266 is essentially a 3.3v board; even the VIN measurs about same. Therefore, is VIN good enough for handling power & logic levels for these sensors? I just keep getting 'Out of Range' or some random readings.
@AkalankaSiriwardana
@AkalankaSiriwardana 2 года назад
Good job and thank you so much for this video ❤
@sritu_hobby
@sritu_hobby 2 года назад
you are welcome
@RogerThingsChannel
@RogerThingsChannel 3 года назад
Thank you very much, it was very useful for my project. I had to make one change to make the relay work properly, connect the VCC of the relay to the 3.3V output of the controller, located between pins D4 and D5. This way the relay works as expected. Best regards.
@JadhavAleakhya
@JadhavAleakhya 3 месяца назад
Sir how did you get the components. Is there the Kit readily available anywhere?please respond
@Mounika493
@Mounika493 2 года назад
Hello sir, Could you please explain how you done that code in blynk cloud app as currently the blynk you used is not working please
@clement_01
@clement_01 3 года назад
Hi, what kind of water pump can I use for the relay module ?
@sanketmudholkar2889
@sanketmudholkar2889 3 года назад
What was that last connection bro that you connected ? It was like 2 clip like thing ? Can u pls send the purchase link of it?
@samproductions7
@samproductions7 3 года назад
Sir one doubt nodemcu board is fully settled with breadboard now where I have to place connecting wires
@asyiqmln
@asyiqmln 3 года назад
will it work if the power source is only from nodemcu (by usb)?
@madavann938
@madavann938 3 года назад
Bro what is the last connection when you give the contact everything gets on ,is that battery?
@kavyahj8827
@kavyahj8827 3 года назад
Sir in end you have used clips and lcd gets on..where exactly you have given the other end of clips??
@chase14000
@chase14000 3 года назад
do i have to buy a relay if i only want to monitor water level? also, what are the jumper cable types do i need? male to female ? female to male? male to male?
@sivamanipalanisamy1628
@sivamanipalanisamy1628 2 года назад
Thank you for the video because i have sciens experiment like this
@sritu_hobby
@sritu_hobby 2 года назад
Your welcome
@Rahuls098
@Rahuls098 10 месяцев назад
Frm what source u supplied power? What are those crocodile clips?
@nurfatihah9218
@nurfatihah9218 28 дней назад
May i ask? The clip red and black at the end of video comes from where?
@rokesh3427
@rokesh3427 3 года назад
Bro why do we need relay... Is that for 5v power or any other purpose.... If i use usb cable for power do i need relay?
@rjsindol801
@rjsindol801 2 года назад
This is what I exactly looking for my thesis device exactly thank you for this video sir godbless 🤗
@sritu_hobby
@sritu_hobby 2 года назад
Your welcome
@rjsindol801
@rjsindol801 2 года назад
sir this type of components is this available in the philippine market?
@sritu_hobby
@sritu_hobby 2 года назад
You can bye these components on amazon or banggood. I dont't know philippine markets.
@qujequje9480
@qujequje9480 2 года назад
I am also searching it 🥰🥰🥰🥰🥰
@qujequje9480
@qujequje9480 2 года назад
@@sritu_hobby thanks
@mustakimkureshi6791
@mustakimkureshi6791 Год назад
Bro can you suggest how to connect motor with relay.. Can i connect 9v dc motor with relay for project purpose..
@mxhxmmxd_dxzly
@mxhxmmxd_dxzly Год назад
hi sir the source code link is actually the link to the apps store and not the source code. may i Have the link for the source code
@WawanSetiawan-xn3ke
@WawanSetiawan-xn3ke 10 месяцев назад
Masya Allah luar biasa informasi dan projek ini sangatlah bermanfaat, sukses selalu terimakasih semoga ilmunya berkah pa..
@whisheycarl8549
@whisheycarl8549 Месяц назад
hello i want to ask can this iot hardware connect with flutter. i want to develop mobile app to monitor it
@vatsalkhalasi2915
@vatsalkhalasi2915 2 года назад
We need to upload wifi code and waterlevel monitoring code simultaneously or seperately could anyone explain me?
@muhammadrafiuddin980
@muhammadrafiuddin980 3 года назад
wts when i put my ultrasonic i cannot upload when i disconnect i can upload the code..what the problem?
@amarunghosh7904
@amarunghosh7904 3 года назад
Can it be connected with 9v battery?
@eln_ty_61_badrinathsabban88
@eln_ty_61_badrinathsabban88 3 года назад
Your ues is android system but kon saa app ues kiye sir plz tell me sir
@vickybhadson9934
@vickybhadson9934 2 года назад
wow great!
@sritu_hobby
@sritu_hobby 2 года назад
Thank you
@mannshah4840
@mannshah4840 3 года назад
Which software you used?
@Faisalkhan-ry4eg
@Faisalkhan-ry4eg 3 года назад
Great job can it will work on larg water tant
@YoutubePremium-wh6mi
@YoutubePremium-wh6mi 2 года назад
hallo sir, how if i want to send notification to my whats'up or telegram if the tank is full using this esp. thanks
@patrickdemers9388
@patrickdemers9388 3 года назад
I got the amazon relay module and it is slightly different than the one in the video could you explain where I could find the In, Vcc, and GND pins
@patrickdemers9388
@patrickdemers9388 3 года назад
What is your WhatsApp?
@mustakimkureshi6791
@mustakimkureshi6791 Год назад
Bro how can we add push button or switch for manually motor on/off
@fatinliyana5290
@fatinliyana5290 3 года назад
Can i change the ultrasonic sensor to flame sensor?
@mannshah4840
@mannshah4840 3 года назад
Hey, there is not display in LCD please help me out.
@dorlejasivemiroslavaorduna5414
he visto otros videos suyos pero este no tiene codigo en el link
@engkukamil6805
@engkukamil6805 3 года назад
Can i know what is function of Relay module?
@Mijink123
@Mijink123 3 года назад
sir code uploading error in Arduino IDE 2.0 . sir any solution?
@marylorenlorico6354
@marylorenlorico6354 Год назад
Sir Can you make a video again with arduino contaminated water detector?
@user-xo1mz2ew7g
@user-xo1mz2ew7g 7 месяцев назад
I am not able to upload the code from Arduino to blynk ,that board:Nodemcu is not appearing why.kindly help
@FAzhar-hr9xg
@FAzhar-hr9xg Год назад
what is your constraints on this project?
@narasimhareddy203
@narasimhareddy203 3 года назад
can I get a source code for this project
@davidtaiwo5443
@davidtaiwo5443 2 года назад
Thanks for the videos, helpful, but please how can i use it for oil tank like Diesel or Petrol or is there a sensor for that, Thanks
@sritu_hobby
@sritu_hobby 2 года назад
For that you can use waterproof ultrasonic sensor
@davidtaiwo5443
@davidtaiwo5443 2 года назад
@@sritu_hobby Thanks for the response, really helped you are the best
@yazlmlabars6056
@yazlmlabars6056 2 года назад
Hi sir ı need to buy nodeumcu wifi sensor ; ı see the two different type one of is a Cp2102 model another one Ch340 model ; in your project cp2102 but ı want to buy Ch340 model if ı build circuit with Ch340 , does it work correctly?
@sritu_hobby
@sritu_hobby 2 года назад
Yes of course.
@hendritresnahadi4146
@hendritresnahadi4146 Год назад
How make it that module hc sr04 water prove? Tx u mr
@filchaneco506
@filchaneco506 2 года назад
sir can you have video to show how did you install the additional libraries for the arduino IDE? thanks
@sritu_hobby
@sritu_hobby 2 года назад
You can visit my website.It has a full description of this project.
@lavarajupyla9721
@lavarajupyla9721 3 года назад
HOW TO SOLVE STRAY ERROR LAST LINE PRINT LCD STATEMENT WHILE COMPILING ARDUINO PLS
@technicaleducation422
@technicaleducation422 2 года назад
Please help me how install program in Arduino.
@zunairsarfraz621
@zunairsarfraz621 3 года назад
App??
@yashpatil6309
@yashpatil6309 Год назад
Ultrasonic sonic sensor is always returning 0 what to do
@clement_01
@clement_01 2 года назад
Is there a way I can turn on the pump automatically when the water level is low instead of turning on manually when the water level is low?
@sritu_hobby
@sritu_hobby 2 года назад
Water level depend on your water tank
@vatsalkhalasi2915
@vatsalkhalasi2915 2 года назад
Yes you are, relay is there for it . You need to write a code as if level is low then input to relay is high which makes relay on and motor power circuit is connected . And if level is =High give relay input as low turn out relay to be off and motor power circuit isoalted.
@moment_made_212
@moment_made_212 3 года назад
Can set alarm in app when it reaches high level to avoid overflow
@mehedihasan2809
@mehedihasan2809 3 года назад
What the way to find the app, which used here?
@mannshah4840
@mannshah4840 3 года назад
what have you done in last part? on 7:42? and there is only port 5 available not port 3 in aurduino ide
@mannshah4840
@mannshah4840 3 года назад
@@sritu_hobby you connected croc cable with 2 wires which alredy connected with breadboard right? so where is connection of croc cables?
@raguman9115
@raguman9115 2 года назад
Hi SriTu tech, I have a question, if I want to use esp32 what are the things that I should change in the program?
@sritu_hobby
@sritu_hobby 2 года назад
I'll make it soon
@raguman9115
@raguman9115 2 года назад
Thank you so much
@RandaHidayatama
@RandaHidayatama 3 года назад
Hello min, For the electric current, can we connect it with a usb charger or use a battery?
@RandaHidayatama
@RandaHidayatama 3 года назад
@@sritu_hobby What is the name of the cable to clamp from esp8266 to the supply at 7:37 minutes??
@RandaHidayatama
@RandaHidayatama 3 года назад
Is that a 12v battery as its electric current? Is there a picture for the electric current source?
@iffatadib948
@iffatadib948 3 года назад
why there are error in my coding?
@neerajsharma6044
@neerajsharma6044 3 года назад
If we do not require to add motor control & need to monitor through blynk then I guess we can eliminate the Relay module, LCD display, and I2C module.
@neerajsharma6044
@neerajsharma6044 3 года назад
@@sritu_hobby Thankyou
@neerajsharma6044
@neerajsharma6044 3 года назад
@@sritu_hobby Though can we give Home AC supply to the breadboard (HC-SR04 & ESP wifi module)??
@anjabo8448
@anjabo8448 3 года назад
Hello. Will this sensor work with kerosine ( heating oil) ?
@anjabo8448
@anjabo8448 3 года назад
@@sritu_hobby Thank for answering, thats awesome. Will Blynk give a possibility to setup min level with txt sending to phone?
@zubairulhassan8107
@zubairulhassan8107 3 года назад
I want full details about this project
@mitalsoni8916
@mitalsoni8916 2 года назад
Can we make it without blynk and just lcd and i don't want water pump too so can I skip the relay
@sritu_hobby
@sritu_hobby 2 года назад
Yes of course.
@deroqueaj5851
@deroqueaj5851 2 года назад
Hello sir the blynk app in the video is different
@rwahyuadipp
@rwahyuadipp Год назад
Kak yang coding pakek hp/laptop? Dan yg di telegram itu apa kak mohon dijelaskan
@swedhaprabakaran1610
@swedhaprabakaran1610 2 года назад
Sir , it is related to tracking the water usage ? We can do this project for water tracking
@sritu_hobby
@sritu_hobby 2 года назад
Yes you can do it.
@swedhaprabakaran1610
@swedhaprabakaran1610 2 года назад
@@sritu_hobby thank u sir
@DjordjeKostic
@DjordjeKostic 2 года назад
Great, is your ESP 5.oV or 3.3V
@sritu_hobby
@sritu_hobby 2 года назад
5v
@clement_01
@clement_01 2 года назад
Hi, how do you power your ESP8266 board? How much voltage you are putting into the board? Thank you
@sritu_hobby
@sritu_hobby 2 года назад
12V DC external power
@clement_01
@clement_01 2 года назад
@@sritu_hobby Have you used a voltage regulator to lower down the voltage to 5v ? Can the board withstand 5v input through the Vin? Thank you
@sritu_hobby
@sritu_hobby 2 года назад
I'm using bench power supply.Other details are in website. Check it out. Thank you.
@omartk3426
@omartk3426 2 года назад
Sir I have a question about powering the circuit. Does the circuit work with a 5v power supply? or do I need a 12v DC for it to work? Because I plugged a 5v power supply and the LCD screen was on but without text.
@sritu_hobby
@sritu_hobby 2 года назад
Please provide a 12v power supply
@swedhaprabakaran1610
@swedhaprabakaran1610 2 года назад
Sir we can use bread borad no 12 for the project
@sritu_hobby
@sritu_hobby 2 года назад
Yes
@swedhaprabakaran1610
@swedhaprabakaran1610 2 года назад
Sir we can use no.12 bread board for this?
@sritu_hobby
@sritu_hobby 2 года назад
You can try it.
@decoder1214
@decoder1214 3 года назад
How many volt battery required for power connection ??
@decoder1214
@decoder1214 3 года назад
@@sritu_hobby and can i do with my mobile phone ??
@decoder1214
@decoder1214 3 года назад
@@sritu_hobby sir code error problem
@xarcegaming1589
@xarcegaming1589 2 года назад
Sir I have just one question that How much supply does node MCU requires to operate this circuit Plz reply as fast as u can!
@sritu_hobby
@sritu_hobby 2 года назад
12v is good
@xarcegaming1589
@xarcegaming1589 2 года назад
@@sritu_hobby thank you very much sir
@AshrafulmHaque
@AshrafulmHaque Год назад
You can make easy this project
@masterskull8258
@masterskull8258 2 года назад
Bro can I use a small motor like 12 dc motor for this same circuit
@sritu_hobby
@sritu_hobby 2 года назад
Yes you can.
@masterskull8258
@masterskull8258 2 года назад
@@sritu_hobby thanks bruh
@omkarpandit8175
@omkarpandit8175 2 года назад
@@sritu_hobby but sir the 12v dc motor is not working on that project Pls guide me
@arasmuhamed6130
@arasmuhamed6130 Год назад
Sir I'm every thing done but when I use complete code I don't know how blynk library using in source file please Answer
@sritu_hobby
@sritu_hobby Год назад
Please use our website.srituhobby.com
@baracudda88
@baracudda88 2 года назад
can i use the codes into new blynk 2.0? the blynk legacy can’t accept new user anymore.
@sritu_hobby
@sritu_hobby 2 года назад
I have not tried it yet
@ClimaxNetwork
@ClimaxNetwork 3 года назад
kok gak off
@swedhaprabakaran1610
@swedhaprabakaran1610 2 года назад
Where you have connected the two clips please tell sir it is very useful for me
@sritu_hobby
@sritu_hobby 2 года назад
External power supply
@swedhaprabakaran1610
@swedhaprabakaran1610 2 года назад
If u connect on the ultrasonic sensor aah?
@swedhaprabakaran1610
@swedhaprabakaran1610 2 года назад
Or u have connected to the breadboard? Please 🙏 tell sir
@syamprateesh
@syamprateesh 9 месяцев назад
Water level is not showing stable
@yazlmlabars6056
@yazlmlabars6056 2 года назад
Hi sir, ı can try build your circuit ı have the all sensors now after that how do you can power the circuit? (7:50 on video)
@sritu_hobby
@sritu_hobby 2 года назад
Your can use 12v power supply
@krishnasai8986
@krishnasai8986 Год назад
Can we connect this as a smart home device to Alexa or Google home
@sritu_hobby
@sritu_hobby Год назад
You can search it on google
@sasit3294
@sasit3294 3 года назад
Bro how you make other components program plz tell , received mail in bylnk just 2components program but how
@sasit3294
@sasit3294 3 года назад
Lcd,sensor
@sasit3294
@sasit3294 3 года назад
U make a own program or received mail from bylnk s or no
@sasit3294
@sasit3294 3 года назад
Tq bro
@Alwayshungryone
@Alwayshungryone 3 года назад
The code is not compiling will u help......... I added all libraries
@Alwayshungryone
@Alwayshungryone 3 года назад
341 error(runtime) .
@fakhrurazirazi3519
@fakhrurazirazi3519 3 года назад
sir .. sory for asking if i use motor pump 12v DC.. where should i connect 3 wiyer at relay since the relay i will not used cause only can connect to 230v Ac pump
@fakhrurazirazi3519
@fakhrurazirazi3519 3 года назад
@@sritu_hobby Kamoer DC12V NKP mini Peristaltic pump
@fakhrurazirazi3519
@fakhrurazirazi3519 3 года назад
@@sritu_hobby 2 only.. positive negative
@fakhrurazirazi3519
@fakhrurazirazi3519 3 года назад
@@sritu_hobby so just use the same relay right? Thanks for reply later I will inform if there any problem bcause..the motor still not arrive yet
@fakhrurazirazi3519
@fakhrurazirazi3519 3 года назад
@@sritu_hobby update..the circuit running well..thanks to u 😊.. I try to connect with my DC 12v..but cannot works..
@fakhrurazirazi3519
@fakhrurazirazi3519 3 года назад
@@sritu_hobby sir it works.. hmm some silly mistake i made before this huhuuuhuhu
@decoder1214
@decoder1214 3 года назад
sir isme ham buzzer add kar sakhte hai
@decoder1214
@decoder1214 3 года назад
@@sritu_hobby can i put buzzer in this circuit
@zubairulhassan8107
@zubairulhassan8107 3 года назад
Great sir
@dianastefan
@dianastefan Год назад
Hello, Sir. Can i use nodemcu esp8266 by lolin? I hope u see this, thank you
@sritu_hobby
@sritu_hobby Год назад
It's ok
@dianastefan
@dianastefan Год назад
@@sritu_hobby thanks a lot
@EL90291
@EL90291 Год назад
Is the sensor waterproof ?
@sritu_hobby
@sritu_hobby Год назад
No
@akbaraco466
@akbaraco466 Год назад
Hello, sir can we get the program please?
@sritu_hobby
@sritu_hobby Год назад
srituhobby.com
@amsyarhasni7158
@amsyarhasni7158 Год назад
I was to ask you where we can get the auth token?
@sritu_hobby
@sritu_hobby Год назад
Check your blynk web dashboard
@introvert576
@introvert576 Год назад
assalamualaikum Sir, if I want to add a ds18B20 sensor, reading the water temperature when it is less than 20 c• the relay is on, and the ultrasonic sensor when reading the water level distance is less or more than 12 cm the relay is also on. esp32 devkit v1 microcontroller. and displayed in the blynk application. Please let me know, thank you
@introvert576
@introvert576 Год назад
Sistem nya sama kaya di video master di atas tapi bagai mana caranya agar bisa menambahkan sensor ds18B20 terimakasih
@sritu_hobby
@sritu_hobby Год назад
Englis???
@introvert576
@introvert576 Год назад
assalamualaikum Sir, if I want to add a ds18B20 sensor, reading the water temperature when it is less than 20 c• the relay is on, and the ultrasonic sensor when reading the water level distance is less or more than 12 cm the relay is also on. esp32 devkit v1 microcontroller. and displayed in the blynk application. Please let me know, thank you
@sritu_hobby
@sritu_hobby Год назад
You can do it.
@norbertszymanski4273
@norbertszymanski4273 2 года назад
What is Relay module for?
@sritu_hobby
@sritu_hobby 2 года назад
Connect the water pump
@ashokpatil1577
@ashokpatil1577 3 года назад
What are used for communication ?
@ashokpatil1577
@ashokpatil1577 3 года назад
@@sritu_hobby RF module use karta yet Nahi Ka
@mehedihasan2809
@mehedihasan2809 3 года назад
What is the Name of Mobile app? Can you provide the app link?
@mehedihasan2809
@mehedihasan2809 3 года назад
Circuit Diagram & Arduino code missing in your given link!! Can you provide it please?
@omkarpandit8175
@omkarpandit8175 2 года назад
Hello sir i have use 12v dc motor but it can't run in project so what is the solution please tell me
@sritu_hobby
@sritu_hobby 2 года назад
Please connect your motor to the relay module
@omkarpandit8175
@omkarpandit8175 2 года назад
For 12v motor how many supply I have to give 12v dc Or 230 ac
@muhammadnajib1822
@muhammadnajib1822 2 года назад
can it monitoring system with arduino uno?
@sritu_hobby
@sritu_hobby 2 года назад
Sorry
@YOGESHKUMAR-we3dq
@YOGESHKUMAR-we3dq 2 года назад
Why is ultrasonic sensor not working even after compiling the program
@sritu_hobby
@sritu_hobby 2 года назад
Check your jumper wires
@swedhaprabakaran1610
@swedhaprabakaran1610 2 года назад
What was the name of that two clips?
@sritu_hobby
@sritu_hobby 2 года назад
That's external power supply
@KLEC_SoumyaHugar
@KLEC_SoumyaHugar 2 года назад
Sir,what kind of power supply can we use? Can we use battery
@sritu_hobby
@sritu_hobby 2 года назад
Yah. You can use a 9v battery
@KLEC_SoumyaHugar
@KLEC_SoumyaHugar 2 года назад
@SriTu Hobby thank you sir
@chirravikas1630
@chirravikas1630 3 года назад
Wifi,blynk and I2C library are not installing sir
@chirravikas1630
@chirravikas1630 3 года назад
Sir code is not compiling some warnings are getting like Library LiquidCrystal_I2C ?
@ALLINONE-ec9jq
@ALLINONE-ec9jq 2 года назад
library LiquidCrystal_I2C-1.1.2 claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp8266 architecture(s). Executable segment sizes:
@AnkitKumar-si7pi
@AnkitKumar-si7pi 5 месяцев назад
From where I can take this code
@sritu_hobby
@sritu_hobby 4 месяца назад
Description
@nabillarmdhn3502
@nabillarmdhn3502 2 года назад
why your srtu app very slow?
@sritu_hobby
@sritu_hobby 2 года назад
It's developing
@sibiram4577
@sibiram4577 10 месяцев назад
Beo code for this experiment
@yk-je4mu
@yk-je4mu Год назад
U should mention the names of the components as well🙄🙄🙄
Далее
Нашли Краша Младшей Сестры !
23:46
DEFINITELY NOT HAPPENING ON MY WATCH! 😒
00:12
Просмотров 21 млн
Try not to Laugh Game!
00:38
Просмотров 1,7 млн
Sensors - which one to use
17:06
Просмотров 1,3 млн
899$ vs 360$ which one will you choose ? #iphone #poco
0:18
КРУТОЙ ТЕЛЕФОН
0:16
Просмотров 4,8 млн