We Bought a MANGLED Honda 600cc Scooter | Will it Run + Ride Again?

Подписаться 1,1 млн

Просмотров 222 тыс.

50% 1

Check out our BRAND NEW folding welding table: www.cars-cameras.com/shop/p/d...
We bought this crashed Honda Silver Wing 600 from a power sports dealership 2 years ago- one of their customers got in an accident with this Honda scooter and dropped it off to get fixed, and never picked it up. It had been sitting in a storage container for over a year before we bought it. The pros- this Honda moped has POWER (50 horsepower to be exact)! The cons- it was wrecked badly, there's a hole in the radiator, and we don't have a title. In today's episode we find out if we can get the Honda running and riding again!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/disc...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Авто/Мото

Опубликовано:

15 фев 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 889

@twocvbloke 2 года назад

Honda revivals are always hilarious, people are always surprised when the thing cranks over and fires up without any complaints, even with stinky old stale fuel in the tank, Honda don't care, Honda gonna run!!! :D

@dalehadley3283 2 года назад

Just like older Yamaha snowmobiles!

@catsbyondrepair 2 года назад

@@dalehadley3283 HONDA LIKES TO FUCK so of course it will run

@masonprophet6396 2 года назад

@@catsbyondrepair he meant "also"

@elle4702 2 года назад

Only for fans over 18 years old. girl in perfect BODY G BUNNYGIRLSS.SITE cup milk god & perfect erotic body constriction god Toro face transcendent beautiful sister like a famous model tricks I do not know Megan: "Hotter" Hopi: "Sweeter" Joonie: "Cooler" Yoongi: "Butter So with toy and his tricks, do not read it to him that he writes well mamon there are only to laugh for a while and not be sad and stressed because of the hard life that is lived today. Köz karaş: '' Taŋ kaldım '' Erinder: '' Sezimdüü '' Jılmayuu: '' Tattuuraak '' Dene: '' Muzdak '' Jizn, kak krasivaya melodiya, tolko pesni pereputalis. Aç köz arstan Bul ukmuştuuday ısık kün bolçu, jana arstan abdan açka bolgon. Uyunan çıgıp, tigi jer-jerdi izdedi. Al kiçinekey koyondu wins taba algan. Al bir az oylonboy koyondu karmadı. '' Bul koyon menin kursagımdı toyguza albayt '' dep oylodu arstan. Arstan koyondu öltüröyün dep jatkanda, bir kiyik tigi tarapka çurkadı. Arstan aç köz bolup kaldı. Kiçine koyondu emes, çoŋ kiyikti jegen jakşı dep oylodu. # 垃圾 They are one of the best concerts, you can not go but just seeing them from the screen, I know it was surprising 💗❤️💌💘

@derekmaxwell8164 2 года назад

Fuel doesn't know what brand carburetor of its in come on quit living in a fantasy land.

@ericwilson2585 2 года назад

I think a reverse trike would be an awesome build with the parts from that Honda scooter.

@netronet1383 2 года назад

I like the reverse trike idea too. I'd like to see a reverse trike with big dirt tires and cushy suspension. I've seen enough of reverse trikes for the street.

@grobischmiede9301 2 года назад

Reverse Trike 🤘🏻😜👍🏻

@Ezra7X 2 года назад

You want to see someone die homie, those flip so easy if the back wheel gets caught when you're sideways

@netronet1383 2 года назад

@@Ezra7X Nobody wants to see anyone die. And I guess the truth is it would sort of be copying Grind Hard Plumbing, who made an offroad reverse trike back in 2020. Their conversion was from a 1000cc Ski-Doo. I don't think it has killed Ethan or Edwin yet.

@nickkaarslev290 2 года назад

i like that idea too!! and then put some mud tires on it, bet you can find something that fits the rear rim!

@DaroffApFire 2 года назад

It's literally been sitting outside half on it's side in the mud for who knows how long with who knows how old of gas in it.... and it starts right up without any issues whatsoever. Now THAT'S a Honda for ya. Can't beat that reliability. Hands down the best small engines on the planet.

@strawsparky33 2 года назад

when the apocalypse hits the hondas and toyotas will be the only cars left running after years of neglect.

@AlienLivesMatter 2 года назад

@@strawsparky33 I'll be hunting down Mercedes Benz from the 60's or 70's to run on vegetable oil

@panfriedmarmot 2 года назад

My brother in law pulled an abandoned '79 Z50R out of a ditch half submerged in water. One new cylinder and can of PB blaster later and I was riding it around the woods behind my house.

@jannneumann5766 Год назад

I crashed my Yamaha scooter and it still started 1st time everytime I tried it for the next 2 years, till the battery gave out. Same petrol too.

@jimmyhughes5392 2 года назад

so John's got 2 work shops, Ike's got a workshop, that's 3 workshops between 3 guys. Why isn't there 3 separate projects and a grue ling showdown to see which is the best yet?

@Desert10075 2 года назад

These guys are at a whole new level of cool. Think about it they take junk and they make it come back to life again and they have a lot of fun in the meantime. I've had over 25 motorcycles so far in my life, I always buy the old fixer-uppers because it's so much fun getting something for not very much money fixing it making it like new again and then getting a lot of miles out of it whether it's in the desert or on the street.

@elle4702 2 года назад

@theworstgamervr 2 года назад

I really need to start doing my research on what to look for i mean I grew up working on bicycles and I know a great deal bout automotive technologies. My biggest problem would be correcting others shit wiring and such idk. I don't know I'm not balsy when it comes to gambling lol but I do know a good deal bout getting motors running

@JarofMayonaise 2 года назад

These guys and some other youtubers are incredibly lucky finding what they do. I would have killed to find that scooter for $200 but with my luck I would probably have never found it in the first place, and if I did they would probably want $1000 for it. People around here would soon rather see the thing you want rust into the ground than to sell to you. They assume you want it so low so you can sell it for high, but they don't understand all the work and/or money required between those steps, and they want an often ridiculous amount for the thing. "It was $5000 new so I want at least $2500 for it because it has low miles. Nevermind it's missing all the rims and tires, the head is off the motor, and everything is covered in rust... "I know what I got!"..... If we were all as lucky as these guys, we'd all be doing it. (at least anyone who gives a shit about powersports and the like).

@theworstgamervr 2 года назад

@@JarofMayonaise well what help them is there fan base people always sending them deals and even sellers are willing to give em a deal just to see there kart in there vids. But ya $200 for a scooter that needs a fork, radiator, and some plastics ain't that bad. Honestly I'd prob gut everything off it and build a go kart with lights and turn signals

@Slane583 2 года назад

@@theworstgamervr The only suggestions I can give to you about anything motorcycle related is look for a Japanese brand. Stick to older bikes as they're simple as can be and do research on which ever model of bike you find. Because some models of bike regardless or who made it are hard to find parts for. Thus making them expensive to fix. Where as other models have loads of available repair parts. Also get a repair manual, a good repair manual shows you how to put things back together and what the proper torque specs are for bolts and fasteners. They usually have wiring diagrams in them as well so if your bike has hacked up wires you can repair it easier if you know which wires do what. Also early release models of some bikes normally had recalls for problems. So if there was a bike you just happened to find look for one like it that is a year or two newer. Like my 1980 Honda CX 500, the early 1978 release model had a problem with bad cam chain tensioners. The plastic they were made from was too weak and would wear out prematurely causing the timing chains to go slack. As well as the pieces of the tensioner would go into the engine crank case causing premature engine failure. My father told me about his early model Honda CB 550 which had a problem with the cam shaft constantly going out if timing. The aluminum for the cam bearing in the head was too soft and wore our quickly so he said he was always adjusting the timing on it to keep it running. Eventually he traded it in at the dealer for something else. :)

@kevin34ct 2 года назад

Hey I still ride my Silverwing 600. It has a great sounding engine. I've gotten mine to 108 MPH. If you have any questions, just ask. If you don't need the seat and it's not ripped, let me know if you'd like to get rid of it.

@elle4702 2 года назад

@jasonlukasik5595 2 года назад

Who let the hookers in?

@randyhaglund7557 2 года назад

@@jasonlukasik5595 probably cause he rides a silverwing 600 lol

@josephdougherty2399 2 года назад

@@jasonlukasik5595 well....the guys are single ... I think we need to protect their virtue

@pollyg562 2 года назад

Honda never ceases to amaze me with their inventiveness and going that bit extra where most companies cut corners, i see why some of the Honda Goldwings hold their prices , I've watched many Honda rebuild videos including Kevins last video where they stress KEEP THE OG PARTS unless something is 100% destroyed don't by aftermarket parts

@000302lf 2 года назад

I would make it into a reverse trike, that should be a great commuter to run to the parts store. Make a little bed in front for parts pick up or hauling any thing you like.

@elle4702 2 года назад

@benjaminkriebel3569 2 года назад

especially with the CVT!!!!

@kevinsmith9420 2 года назад

"It'll be fine". Best phrase in the world.

@BrianVillegas67 2 года назад

*Leaning* 3-wheel trike, reverse delta (two wheels in front). That keeps the entire drivetrain together, and C'Mon Now! Leaning vehicles ROCK! Keep up the great work gents!!

@CZ350tuner 2 года назад

I was thinking the same thing. (The technical term, for a reverse delta trike, is a Tabold trike). Morgan 3 wheelers are Tabold trikes.

@cheerdiver 2 года назад

Mechanix Illustrated Feb, 1983. Expected MPG >55gal

@elle4702 2 года назад

@BrianVillegas67 2 года назад

@@CZ350tuner Copy that, always great to learn new things, thanks! 😏👍

@MrJdsenior 2 года назад

A bit more complex, but it would be cool.

@netronet1383 2 года назад

I like the welding table. I think magnet stop blocks on the square tubing for those swing down supports to come down and butt up against might be a good addition.

@elle4702 2 года назад

@myneckjusbroke3301 2 года назад

For sure

@bradley3549 2 года назад

Magnets + metal working = kind of lame. I hate how all my magnetic stuff just collects mounds. Sometimes it's worth the trouble but something where a spring would be just as good, I'll take the spring.

@netronet1383 2 года назад

@@bradley3549 Yeah, I can see that being a bit messy, but it's not like they could not be cleaned off easily. I was just thinking the quickest and easiest way to put a stop in without creating more fab work.

@aa-jq9qe 2 года назад

stood outside for two years, spins up like the thing was warm? that's a honda for sure

@danielmott8830 2 года назад

I love the "scariest ride ever... No need to go out... To dangerous etc." comment followed by the disappointment in the track time followed by "I think I can beat it!" Classic. Timing your laps is equivalent to "Hold my beer"

@vaibhavdlv 2 года назад

Hey guys, congrats on the table. It's tools like this that really help people.

@danielhelbig1116 2 года назад

Cool revival although I would’ve loved to see you ride the bike on the street considering that’s actually what it’s made for

@shakyhandpictures2185 2 года назад

Car and cameras manufacturing inc. Good job boys, hope it opens all kinds of doors for you!

@Stratos53100 2 года назад

The start-up was Epic... You might want to file a Patent on the table before somebody else steals the design, even though it may be simplistic you have nice detail of the wings & edges, i hope the sold product is painted.

@ryanmcintyre2587 2 года назад

A cam am ..or "sling shot" would be a cool thing to do with that motor and trans setup

@tomlanore4283 2 года назад

Here is an idea. Before you start to dismantle it. Why not look on the weber for a bit to see if you can find the parts for the front end and put it back to factory specs and ride it that way. They are plenty fast and unless Ike has a bunch of stuff to haul back and forth from home it would be super cheap transportation.

@fillg 2 года назад

I was thinking the same. If it's got a title it seems like a shame to just rip out the engine and cvt. I used to ride a Honda Helix 250cc scooter everywhere and it was awesome. Could have used a touch more power but this thing is a 600-ish cc

@matthewf1979 2 года назад

That 600cc motor/cvt would absolutely kill on a Yard Dart type kart.

@oldshovelhead 2 года назад

Glad to see that welding table! You guys are def moving in the right direction biz wise!

@paulbailey4152 2 года назад

I love these revival videos there my favorite ones to watch keep up the great work you guys are awesome

@edwardweisenburg16 2 года назад

Never a dull moment with you guys. Entertaining as usual. Awesome 👍😎

@janewaterson9977 2 года назад

That would make a great mini sling shot. You know……a backwards three wheeler with side by side bucket seats. You could build it to be street legal for sure.

@GooseGosselin 2 года назад

Would make a nice engine swap for the Harley. Awesome find though, great episode, thank you Gentleman.

@erikcolon413 2 года назад

I did the same thing to a Honda moped when I was maybe 13 years old. It was at my grandparents house and it had just got done raining so the gravel driveway was packed down pretty good. I was at the end of the driveway and was going to spin the tire in the gravel. Instead, the moped decided to do a wheelie and I whiskey throttled past my uncles car and then his van and when the front came down I smashed into the steel tracks of my grandpa's bulldozer. Used my seed dad's truck and my cousins truck to pull the forks back out. The front tire was flat and the wheel had a big V in it where it hit the track but I still bombed it around the hay field. Good times!

@JohnHill-jm7tm 2 года назад

You there had the Old Man laughing 🤣. No doubt you will find something to use the engine on. Always loving your videos. 🛵🧔💝💝💝

@bergauk 2 года назад

Oh man I had a Silverwing and "wrecked" it over 3yrs ago.. Granted this was out in CA so it's definitely *not* the same bike that y'all have. They are FUN. But if you plan to take it on anything high speed I would recommend re-doing the brakes on yours to be split into Front Only and Rear only. Mine suffered from some awful speed wobbles at the worst times(hence the crash I had) and there was no way to correct it with the linked brakes these things had. You just had to hold on and hope you weren't heading towards a wall.

@keithschneidly3922 2 года назад

Air in the ABS

@bergauk 2 года назад

@@keithschneidly3922 I don't think it was anything to do with that, but the way the brakes are set up on the bike are not useful in correcting a wobble. One lever is linked braking(e.g. Front and rear simultaneously) the other was front only. Speed wobbles are hard to correct and even harder to correct for with linked brakes.

@Vadderr 2 года назад

Always look forward to these new videos!

@michaelsteiner1574 2 года назад

Way to go with Your Mini Welding Table. It will be a asset to those who Do It Themselves, and create amazing things!!!

@pollyg562 2 года назад

can't deny this was super entertaining, these guys seem to just get stronger and stronger as a 3 man team, they couldn't have dreamed up a better 3rd man especially as super fans would of first maybe been not to keen on the change as J and I seemed the perfect team but C just melded perfectly

@williamwebb5351 2 года назад

Thanks for all the hard work y'all put into sharing the videos with us. Also, that Honda Silverwing's engine would be awesome on one of the more racing styled go-kart frames. Even better though, with the way that engine runs, I'm willing to bet that it's probably a fuel injected engine. If it was mentioned in the episode, I must've missed it. Not am I familiar with it either. However, it sounds like it needs a little TURBO in it's life. It's already a powerful engine from what it seems, why not add a turbo to the equation? Thanks again guys. It'll Be Fine.

@luisaugustodutrabenites4231 2 года назад

Amazing video! Love your channel! How about a small whole in each column of the table ( and a pin welded in the folding suport) to stable the hinges and making the product even more amazing and safer?

@rednecksdoitbetter491 2 года назад

Hell yeah been watching all of y’all’s videos this morning and now I got a new one

@michaelwilson422 2 года назад

I always temp plug a radiator with high temp rtv and a small sheet metal screw. Easy quick fix. Love the episode

@DaveHiggoHiggins 2 года назад

at 10:18, ANYONE who's ridden a scooter in Bali is screaming, "YOU HAVE TO HOLD THE BRAKE TO START IT"

@BustedKnucklesBuildsTexas 2 года назад

Another great video guys !

@rephlexc 2 года назад

Lovin it boys. Thanks for giving me more idea's. I just realized that i have a perma grin.

@lloydbaker7099 2 года назад

Look forward to the build with that engine that is neat

@yeahitskimmel 2 года назад

Never woulda thought my #1 spot for a break from car content is a channel with cars in the name

@devivoman 2 года назад

I believe the off brand engine you were looking for is xio xiang! What a great find, that engine is almost brand new! Barely over break in!

@reddog543211 2 года назад

Awesome addition to the fleet !!

@Sl33veOfWizard 2 года назад

Great content as always. Whens the new murray video coming? really excited for that one

@clintonproctor8610 7 месяцев назад

One of the best videos yet! Ike on the scooter was hilarious.

@shiftittwistit6677 2 года назад

These scooters are awesome. I ride the same one. Mine is the 2007. They are quick and great handling. Can leave the traffic at stop lights lol. I had mine wide open around 116 mph. These handle like a sport bike.

@jimsaquatics 2 года назад

Great video. That's gonna make a hell of a power plant for a very quick car!

@keithschneidly3922 2 года назад

Probably lighter too!

@sneakersnsupercars 2 года назад

Big engined CVT scooters always been my thing. Commenting half way thru as so happy you guys got it running 😂 and that burnout 🔥

@elle4702 2 года назад

@jameswarren423 2 года назад

You can’t beat an old Honda they will run and run and run one of the best motors out there I think can’t wait to see what you guys put it on ! keep up the great work👍🏼🤩

@keithschneidly3922 2 года назад

You could beat 'em, but they hardly ever break. ☺️

@carlowens3424 2 года назад

Love the longer videos fellas…wouldn’t hurt to make them a hour long ahhahahH

@geigertron3000 2 года назад

LOVE THE TABLE GUYS!!!!

@theworstgamervr 2 года назад

Only Ike would look at a radiator that mangled and think 🤔 its salvageable lmfao love that guy

@kygunworks4982 2 года назад

For very temporary fixes at demo derbies and such we have plugged small radiator holes by putting black pepper in them, it can pack up and seal small holes, I've soldered many radiator pinholes too

@Katman718 Год назад

Folding Welding Table Makes Me Wonder Finer Things In I've Missed 👍 Love you guy's so keep it hot 🔥

@bigfish74f 2 года назад

I can feel a backwards three wheeler coming on using the rear end

@dragonrider6875 2 года назад

That thing it nuts! It's going to be a killer engine for a project

@Zahgurym Год назад

$200, crazy. Wanted a silverwing since they came out. Never could find a deal like that. Shred off the plastics, wide knobby tires, make it one of the "whatever is laying around" builds, grab a trans cooler off an old subaru or miata for the rad. Mad Max the hell out of it.

@hikingandrcs1728 2 года назад

Hell yeah love the burnout 😁👍 Old rubber smokes so good

@999benhonda 2 года назад

I bought a Suzuki Bergman 400cc that had all the front plastics/lights damaged...hadn't been run in 3 years. I put in a battery, hit the button and it fired up just like that. These bikes have nice EFI systems.

@randbradbury 2 года назад

Loved the bell, it was handled perfectly with the quick cutaway. Use the Honda Silverwing engine for a mini merch van! Fill it with hats, shirts, camera gear and the like.

@idowallach6476 2 года назад

you have a legenderaly good scooter on your hands. these things dont die.

@H0L0DREAM 2 года назад

Definitely agree with Ike insisting to not heat and bend forks. The heating and cooling will have changed the temper and internal stresses of the steel potentially weakening it greatly. As he said, it's a cheap and easy fix for a quick bit of fun, not a permanent remedy.

@marksmithson1414 2 года назад

Isaac and Charles are great together they play off each others words so well.

@robertjean659 2 года назад

This is cool stuff guys, going to be great to see what you put this motor in. 🇦🇺🇦🇺

@coreythomas5679 2 года назад

Custom build mini-bike chopper frame. Sickest scooter ever

@Mad-Duk_Machine_Werkes 2 года назад

Those lower trees arent CAST IRON, it would be too brittle and crumble, its forged steel guys - there hasnt been a cast iron part on a motorcycle since the 1960s Harley Cylinders

@jstephenallington8431 2 года назад

My thoughts as well. Cast iron just doesn't take being bent very well. And it REALLY doesn't like being heated and bent BACK again. I'm thinking that it's stamped (or drop forge) steel.

@geoffreyadams6236 2 года назад

Rolled it inside with a Honda logo on it. You know it was going to start! Good video guys.

@Nunya_Bidnez 2 года назад

Maybe this engine would be good for a reverse trike build. Its got the power and the rear end would mount right up and that means the speedo and such will still work. Mini Reverse Trike.... YEAH

@elle4702 2 года назад

@mncmcnc5 2 года назад

If you like that one, pick you up a Suzuki 650 Burgman. That and the Silverwing you have are amazing machines.

@keithschneidly3922 2 года назад

You are right, I've had both scooters. Loads of fun and utility. They carry a lot.

@Flastew 2 года назад

Biggest issue with taking that on your track is the tires. Those street tires are to slick for off road. But that is a very cool unit to make something out of.

@elle4702 2 года назад

@tristanmcnabb2741 2 года назад

I love the welding table cool guys

@hotrodderrecycler3202 2 года назад

I bought angle iron from Home Depot. Welded it together to make a welding table. In doing that learned how to weld to boot. Then I welded a Z28 steering wheel center hub 1951 Plymouth steering wheel and mounted it to a 1981 Z28 tilt column. Welded a modified angle iron to the column mounting bracket. Then put it all into a 1963 F350 4x4 dump truck. 1981 Z28 and a 1963 F350 column mount point to the floor are both 21 inches. Then Florence dropped a NC long need pine tree on the truck.

@arie1293 2 года назад

Man I think I could smell that burnout through my screen LOL. What a steal for $200.

@BigEpinstriping 2 года назад

More scooter stuff and I will watch it for sure.

@chrisstokley7687 9 месяцев назад

50/50 solder and sandpapper clean it.. works.. great bike when new... sad this happened! wow -it motor soo smoooth .. luv it

@thewhomphlew Год назад

I love my swing. Drifts, scoots at 112mph, rips tread off new Bridgestones. 3 countries and 9 states, 6,000 miles in 2 weeks. Wasn't passed by anything. Custom drive clutch exhaust and a tuner.

@adrockey 2 года назад

Great video. Yeah street tires in the dirt or even worse in the mud not a great idea. Can't wait to see that engine and something else.

@chrisw46360 2 года назад

Let me guess, the welding table extension sold out in 2 hours. You guys know your shit. Love the channel!!!

@russellbracken8650 2 года назад

Quick tip on those yamaha warriors. Most of them have reverse, its a manual lever on the right side by your knee. Loved my warrior til it got stolen. I installed a stage 2 clutch and never worried about slipping it from launching, dump and go lol. Keep up the good work guys! Love the vids!

@leifhietala8074 2 года назад

Take the whole engine/swingarm combo and transfer it onto a tadpole trike. Lightweight, fun, inexpensive. Good for the street and people are kinda-sorta used to seeing them now.

@lawnmowerdude 2 года назад

Cool welding table idea!

@hippydippy 2 года назад

Amazing that thing fired right up. That engine & dashboard on a cart would be super bad ass!

@CarsandCameras 2 года назад

What do y'all think about the welding table? Can't wait to see what this power plant will do in a 4 wheeled project!

@lilzach44__63 2 года назад

You guys should bring back iks old blue race kart from the old videos

@u.s.o.creationsjeb9963 2 года назад

You guys should make a reverse trike with the scooter like a slingshot.

@jstephenallington8431 2 года назад

I think that you're on to something there, I like it!

@dustinwilson492 7 месяцев назад

Love the table. Great idea executed simply and beautifully. You should be proud! Keep up the infectious positivity and yall can do anything

@scotthartwig7190 2 года назад

I would do a drag cart with that engine. Having a cvt means you get the takeoff like a torque converter then once the cvt is fully wound up, it acts like a centrifugal clutch to get the most top speed

@keithschneidly3922 2 года назад

The weights could be changed for better take off or high speed.

@proto1132 2 года назад

hits the forks once on the ground and then they are perfectly straight LOL awesome!

@jamesclark2372 2 года назад

like the welding table, good idea

@leskobrandon538 2 года назад

Nice idea for the weld table

@bombermanking 2 года назад

Considering how well the engine sounds and how well the electronics held up its probably worth it to salvage it for a new project. How epic would that be?

@thedude5043 2 года назад

Sick recovery. Hondas are beasts. Looking forward to what happens with this thing. Re your eyeballing (love that Ike and Charles can see straight between them!) next time you need to straighten something and need a guide, just mark a line in the ground or put some duct tape down.

@CRAZEDX100 2 года назад

Charles with the streamlight stylus pro! My favorite little flashlight

@keithschneidly3922 2 года назад

Nice welding table, good luck.

@pollyg562 11 месяцев назад

once again a small playlist of CandC has stopped a panic attack, 3 friends working in such harmony im lost in my mind turning spanners with the guys and im good again

@Jimbobdro 2 года назад

You guys got that for a steel!!! 😲 I wish I could find something like that

@HUHBAT 2 года назад

When Ike drives out of the shed after it reminded me of the Doberman Pinschers in Resident Evil. LOL

@gradybrowning3976 2 года назад

Awesome buy, brand new 600 for $200 bucks! Can’t beat that!

@greymatter1999 2 года назад

Can't wait until next video about this bike.

@stuartkarshagen6274 2 года назад

That was a sweet scooter, dang 🤯, so much luxury 🤙🏻

@257796 Год назад

I do like that streamlight in your hand. That's how I know you boys know what your doin'

@jamesleighwoodansteel9969 2 года назад

Fun as always

@jasondavis3288 2 года назад

Guys I love your channel!! I'm addicted!! Ike my girlfriend wants to know about swamp houses!! 🤣

@daveyjahosaphat1428 2 года назад

Hey fellas! Bet that scoot would be a hoot as a reverse trike with a mudder outback. If the headstock isn't boned, it should be pretty easy to have a nasty sled. Dirt drags, baby. That burnout!