Тёмный

We're Building a 5 Speed Racing Kart! (16HP) 

CarsandCameras
Подписаться 1,2 млн
Просмотров 675 тыс.
50% 1

We're waiting for the drag strip to open for the season, so we're starting a new project in the meantime. A 200cc four stroke 16 horsepower engine with a 5 speed transmission and electric start. We're putting the Lifan on my "9 reasons to buy an old go kart" kart that had been wrecked, pushed to the side, and parts robbed. The kart chassis, a Phantom Racing Chassis Gauntlet, is getting a mild restoration as well, with touch up paint, new floors, and rust repair.
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
Go Power Sports: bit.ly/3QKyODE
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Авто/Мото

Опубликовано:

 

18 фев 2018

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 847   
@guytypeperson
@guytypeperson 6 лет назад
Your plasma cutter needs a filter-drier on its air line. Moist air will turn to steam in the arc and make it pop and spit.
@MrTheHillfolk
@MrTheHillfolk 6 лет назад
Mike Jones That’s crap then, mine came with it already installed.
@projectinmotion2425
@projectinmotion2425 6 лет назад
Mike Jones just get the water out of the compressor
@MyLonewolf25
@MyLonewolf25 6 лет назад
Or too high of pressure
@ralphmenta249
@ralphmenta249 6 лет назад
Project - Condensation perpetually builds up. Even if u drain it, there will ALWAYS be buildup. Mike Jones was correct, if u dont have one, u NEED one. U might get away with not using one a few times but when that condensation hits, u can blow off the tip or entire nozzle.
@johnmbranham69
@johnmbranham69 3 года назад
i know this is old vid, but does the cfm on the compressor out run the cfm you need for the plasma? i learned, my pancake compressor was NOT enough
@hewfil1
@hewfil1 6 лет назад
Now that you're building one, there should be a race between RedBeard'sGarage, BoostedBois, and you guys, all with your shifter karts.
@noahhill6434
@noahhill6434 3 года назад
Don't forget grind hard plumbing co
@noahhill6434
@noahhill6434 2 года назад
@Cameron Keillor someone always has to gap the rest or it wouldn't even be interesting 😂 winning is winning whether it's by an inch or a mile
@CarsandCameras
@CarsandCameras 6 лет назад
"Only" 16HP, but it should be very quick!
@user-fw4vx7wx2y
@user-fw4vx7wx2y 6 лет назад
CarsandCameras 굿gooooooooood
@KRYNK
@KRYNK 6 лет назад
Ur mum gay lol
@hipotop
@hipotop 6 лет назад
250cc 2-stroke next time.
@jeff3627
@jeff3627 6 лет назад
16hp is plenty enough i think maybe 20 hp would be crazy
@macmclemore6724
@macmclemore6724 6 лет назад
Not "next time"... 2 Stroke EVERY TIME. Braaaaap...!!!
@darc2255
@darc2255 6 лет назад
15:00 its a paint ratio stick. Use it to measure your ratios of paint/hardener and thinners. Still use these quite often
@bwxmoto
@bwxmoto 6 лет назад
That rooster probably thinks your a big competitive rooster in the yard with those huge red ear muffs on.
@tylertoptier2353
@tylertoptier2353 5 лет назад
I'm crying 🤣🤣🤣
@gregv1852
@gregv1852 4 года назад
Yeh lol
@Revdonlee74
@Revdonlee74 6 лет назад
On this build, could Issac please do a tutorial on basic wiring please? How to move the electric starts, what wires what on motors like these, and how to run batteries and lights and such? I've seen all yer vids and yas always say, "Ike's gonna wire it up.", and boom, they're wired up. Thanks guys.
@Doggomanjaro
@Doggomanjaro 6 лет назад
That door transition tho 👌
@baileymassey998
@baileymassey998 Год назад
Not gunna lie it tripped me out a bit. So good
@sadcrab_5349
@sadcrab_5349 6 лет назад
16hp on a kart like that with a 5 speed will rip like no other
@PedroHenrique-ih1fl
@PedroHenrique-ih1fl 6 лет назад
oh yea, because shifter karts with 50+hp's and 6-speed don't exist lmao
@Casper061288
@Casper061288 6 лет назад
It does, I hit 90kmh with mine and could still go faster xD
@Antonio4240
@Antonio4240 6 лет назад
Unless u talking about the Ducati one sitting in the corner of the garage lol
@paxtonkeshemberg3869
@paxtonkeshemberg3869 6 лет назад
Or any other pro shifter kart
@smallenginedude71
@smallenginedude71 6 лет назад
I’m building a kart atm with a Kawasaki ninja 250 engine. 36hp and a weight of 90kg so far.
@jasonpetrich4141
@jasonpetrich4141 6 лет назад
Oh boy get ready for some real fun, you guys are really moving now with content, can't wait for some real ike & John racing head to head this is awesome you guys are doing great!!
@ttali211
@ttali211 6 лет назад
I put one of those 200cc motors on my racing mower. I used the lever that raises the blades up and down as my shifter.. instead of using a clutch pedal I used a handlebar lever. So I pull the clutch in with my hand and shift it forward/backwards as I’m banging them gears!! Love the vids!!
@derrickreddick2458
@derrickreddick2458 6 лет назад
love your videos and so does my daughter every time I watch one she asks if it's ike don't know why but she thinks he's the best she is 3 it's awesome walked inside to see she has stolen my phone and was watching the dragster build on the dyno keep it up guys
@dream2sea
@dream2sea 6 лет назад
Derrick Reddick Adorable!!
@habdman
@habdman 5 лет назад
Buy her a shifter.
@tstone450
@tstone450 6 лет назад
This is going to be a killer cart! Side note for John. I feel like you could have a killer beard dude. Let's see it!!
@wesleyholbert6531
@wesleyholbert6531 5 лет назад
Put the chicken on it, call it the the AMERICAN EGGSPRESS
@GogogoFolowMe
@GogogoFolowMe 6 лет назад
10:58 MIND BLOWN
@carpediem9285
@carpediem9285 6 лет назад
Great build choice, can't wait to see it running. keep up the good work. Definitely my favorite cart channel.
@kadenlarson9992
@kadenlarson9992 6 лет назад
you are the transition king
@raymondspencer1524
@raymondspencer1524 6 лет назад
madz bush thought i was the only one who noticed.
@Alysavos-rd4tp
@Alysavos-rd4tp 6 лет назад
god damn so true
@yellow5n
@yellow5n 6 лет назад
it broke my brain for a second
@josepherickson7618
@josepherickson7618 6 лет назад
Super awesome video👍👍👍👍👍 going to be a sweet build can't wait to see it in action
@zacski5974
@zacski5974 6 лет назад
YAAAAAAYYYYYYY ITS ABOUT TIME!!!!!! IM SO EXCITED!
@griffgoesfishing3357
@griffgoesfishing3357 6 лет назад
Love it the purple cart is back
@chevelle65wgn
@chevelle65wgn 6 лет назад
That’s why I like my anti seize on the nuts and bolts. I live close to the ocean and steel tends to rust quickly.
@jhawk1985
@jhawk1985 6 лет назад
Here comes the rooster !!!! My dad had one when i was a teen and that bird viscous lol
@desmondmoonbear4143
@desmondmoonbear4143 5 лет назад
I have a rooster too We have a "special connection" as well A special connection with my foot if he gets to close! 😂
@playinwithfirecustoms7954
@playinwithfirecustoms7954 6 лет назад
The Crusher Camaro of Cars and Cameras...I love it!!!
@bmanjohnson51
@bmanjohnson51 6 лет назад
Lol you got me with that transition scene with the door!! 👌🏻😅
@calvindirkmaat
@calvindirkmaat 4 года назад
10:58 That was the coolest scene change ive ever seen
@herbmoran
@herbmoran 6 лет назад
I’m so glad the 9 reasons kart is back I look forward to my notification that either of you has added a video. I’m in the middle of an older coyote bullet kart build thanks to this kart and I can’t wait to finish it! This is just the push I need to move faster keep up the good work!!!
@Amy-wh3dt
@Amy-wh3dt 6 лет назад
go ahead keep making that noise so now i know where your at lol
@franksanford3425
@franksanford3425 6 лет назад
Another great vid guys..
@articat568
@articat568 6 лет назад
Yessssssss been asking for something like this too! Always find a way to make me happy about the build
@articat568
@articat568 6 лет назад
Ps ace hardware has a huge hill man selection.. and all you've gotta do is hand an employee the bolt and they'll pick it out of the crowd
@Koshunae
@Koshunae 6 лет назад
I had to stop the video to comment on how slick that door opening transition was at 10:55. Holy cow good stuff.
@ryancompton3696
@ryancompton3696 6 лет назад
2:39, THAT SHOULD BE THE NEW CARS AND CAMERAS MOTTO
@johnmagnusrobertson2995
@johnmagnusrobertson2995 6 лет назад
Screw it, let’s do ut
@m1l3s1
@m1l3s1 6 лет назад
Been waiting for this !
@DracolegacyOfficial
@DracolegacyOfficial 6 лет назад
that transition tho, damn dude, gettin smooth as fuck.
@vicd7984
@vicd7984 6 лет назад
That disk brake is mint. keep up the great work i love watching you guys
@nathangek
@nathangek 6 лет назад
That transition at 10:58 really tripped me out haha
@heavyduty1001
@heavyduty1001 6 лет назад
Skrew it, let's do it! Nice one liner man.. should be on a t-shirt, and I want a free one when you make them😎
@noahrodeghiero9640
@noahrodeghiero9640 6 лет назад
Cant wait for some more racing!
@benjaminduchow9470
@benjaminduchow9470 6 лет назад
Nothing like a good old go kart build!
@njyt9261
@njyt9261 6 лет назад
Good engineering skills dude impressed
@cabletiesfixeverything686
@cabletiesfixeverything686 6 лет назад
The stick is a measurement tool for paint
@FireAndGasoline
@FireAndGasoline 6 лет назад
Cable ties Fix everything, thats exactly what that is. They arent really used much anymore, now the mixing cups have marking right on them.
@cabletiesfixeverything686
@cabletiesfixeverything686 6 лет назад
FireAndGasoline yeah pretty much
@LouSpowells
@LouSpowells 6 лет назад
From a time when things weren't all disposable, lol.
@Rantz2040
@Rantz2040 6 лет назад
I was checking comments before I made this same comment
@roblucas2376
@roblucas2376 6 лет назад
Yes That's what it is~It is made by "Sickens" for their line of paint~I had one in 1993 when I was "Renegade Truck Conversions" just south of Chicago~I love watching Ike & John~I just discoverd you guys this morning and watched 7 videos~I subscribed and am looking forward to a lot of great videos~Thanks guys keep up the good work
@aldolopez9077
@aldolopez9077 6 лет назад
Ricky Bobby and Cal Naughton Jr. At their shenanigans once again. Shake and bake boys...shake. and bake.
@andychrystal690
@andychrystal690 6 лет назад
Lol when you were like keep making that noise to the rooster and he’s pecking the ground, that rooster literally talking shit to you
@jcraigfam1
@jcraigfam1 6 лет назад
You guys are awesome keep up the good work
@matthewgoodwin8427
@matthewgoodwin8427 6 лет назад
Great video
@bobkeller8383
@bobkeller8383 6 лет назад
Man you boys need a 2x72 belt grinder for fab work
@upsidedowndog1256
@upsidedowndog1256 6 лет назад
Pretty cool project! I am surprised you didn't straighten the axle on that press. Future jackshaft material.
@shawnkiller90
@shawnkiller90 6 лет назад
+CarsandCameras That "stick" is the OG way of measuring out paint mixes(different paints to achieve specific colors+thinners etc) for Air guns. Now a days the marking are just on the side of the "mixing cups" to simplify and save time.
@johnshanahan7359
@johnshanahan7359 6 лет назад
shawnkiller90 finally someone else knew
@shawnkiller90
@shawnkiller90 6 лет назад
XD what can I say ..it is something I have used personally, and when I saw it being used as apart of the cart I was just like WOW......cause you can't find them often times in "modern" pain shops(at least where I live)
@Burntrice747
@Burntrice747 6 лет назад
Its about time you guys are building a 5 speed kart!!!
@catmastercatfishing7436
@catmastercatfishing7436 6 лет назад
Great video 👍🏆
@jackadams8197
@jackadams8197 6 лет назад
Nice Video!
@kaiki8318
@kaiki8318 5 лет назад
Love this channel...you guys are a riot!!!!!!
@jdalzell3354
@jdalzell3354 6 лет назад
damn stoked for this, the purple looks so good too. Steering wheel reminds me of the 80's turbo F1 cars too.
@1D10CRACY
@1D10CRACY 6 лет назад
I have a cheap lotos plasma cutter, have actually had good luck with it over the years and it came with a regulator.
@USN_Ret-
@USN_Ret- 6 лет назад
I have one, too. They have the air pressure to hi.
@shynsly01
@shynsly01 6 лет назад
Yup, I've been beating up my Lotos 520D, which does plasma, tig, and stick for about a year and a half and have no real complaints.
@richgallegos5807
@richgallegos5807 6 лет назад
shynsly01, is that an AC/DC tig, or just DC?
@javiergarza6531
@javiergarza6531 5 лет назад
That lawmower is still my favorite build yet. Hope you all get it running soon
@meco72104
@meco72104 6 лет назад
That's going to be Awesome!
@lucaleo4786
@lucaleo4786 5 лет назад
"Its always something I've wanted to do, bang through the gears, in my go kart" making dreams a reality... love that bro keep it up!
@cl5221
@cl5221 6 лет назад
Holy shit! That transition was so amazing.
@mopedmessiah
@mopedmessiah 5 лет назад
Always loved Lifan! Got a Lifan 150 in my moped right now....and this thing is a monster! This has got to be possibly my favorite project of yours, besides the Ducati and the Black Widow
@DetroitMicroSound
@DetroitMicroSound 6 лет назад
If it were me, I would reinforce those flanges at the ends of the frame up front, where the spindles attach. Can't wait to see how this one turns out! :)
@matthewm3965
@matthewm3965 6 лет назад
I'm so glad that you guys are going back to the old go karts I miss the go kart videos!!!!!!!
@aaroncole4170
@aaroncole4170 6 лет назад
I've been waiting for this kart to make a return it's easily the best kart you own 😀
@Toolingabout
@Toolingabout 6 лет назад
Loved the crusher Comaro reference
@0lbluec10
@0lbluec10 5 лет назад
Just found your guys channel about 2 weeks ago im catching up....absolutely love everything you guys are doing...keep it..cause it will be fine lol
@franklindeesulliable
@franklindeesulliable 6 лет назад
Love the roadkill reference!!
@skimboards4life865
@skimboards4life865 6 лет назад
Love the roadkill reference
@Storyracing387
@Storyracing387 5 лет назад
LOVE the Roadkill reference at the end lmao!
@TheBaccaClench
@TheBaccaClench 6 лет назад
That's some quality transition at 10:57
@peterhughes8934
@peterhughes8934 6 лет назад
I love how so much of your stuff is now metalflake green. When does the strip open for the season? I love the Rail Kart. Cool project for the meantime though, should be a riot.
@brandonlc86
@brandonlc86 6 лет назад
Nice Crusher Camaro reference!
@davidmartens7253
@davidmartens7253 6 лет назад
That cut in the plate y’all made is called a bevel. Sweet videos!
@vealhead
@vealhead 6 лет назад
You guys. Are great.
@Maine3rdEyesOnly
@Maine3rdEyesOnly 6 лет назад
Made my day i had plan to build a shifter car type deal
@kylesimmons2631
@kylesimmons2631 6 лет назад
King Maine type deal
@joshuamitch22
@joshuamitch22 6 лет назад
16hp doesn't sound like that much but in a go kart that's a lot. Can't wait to see this thing fly.
@stilldking
@stilldking 6 лет назад
Nice RoadKill reference!
@reyrey1640
@reyrey1640 6 лет назад
Can y’all do diesel go karts?
@bricekilpatrickbk
@bricekilpatrickbk 6 лет назад
Rey Rey only if you unsubscribe from Logan paul
@Zark-Muckerberg
@Zark-Muckerberg 6 лет назад
Diesel engines are too expensive...
@reyrey1640
@reyrey1640 6 лет назад
KnightMight dude enough about that. That was a month ago. FORGET IT!
@ralphmenta249
@ralphmenta249 6 лет назад
The problem with diesels and power sports is the rev range. Yes diesels have gobs of torque, but very limited range of speed. Not responsive enough
@corey4c105
@corey4c105 6 лет назад
Sweet!!
@davidchapman9957
@davidchapman9957 5 лет назад
These guys living the dream!!build shit and test ride it all day?hell yea,sign me up!
@gokartsminibikesandmore9925
@gokartsminibikesandmore9925 6 лет назад
This makes me happy to see its getting a new life but sad because its not gonna be like the olden days anymore
@Redrider546
@Redrider546 6 лет назад
the transition at 10:56 got me double taking
@pathaze4299
@pathaze4299 6 лет назад
I've always wanted to take a golf cart, lower it and put either a Harley Davidson VTwin in it or a YZ450F engine in. It would be so cool. Maybe one day y'all should try that. It would rip.
@jakestech28
@jakestech28 6 лет назад
Pat Hayes Harley engines are a waste if time. They make so little power they don't advertise how much they make.
@MrTheHillfolk
@MrTheHillfolk 6 лет назад
Jake Tow 5-8yrs ago I saw some published numbers for hp and 1/4 mi times and whatnot. Lol a lot of them were rated peak hp at 3600, and like 65-75hp maybe, and about the same torque. They might rev 6k at the most usually stock. There wasn’t anything on the list that broke into the 13s, maybe one but I forgot. It was mostly 15s and a few in the 14s in the 1/4. Me and my pops have a nickname for em: wheelbarrow. See one riding down the road: hey look there goes a wheelbarrow!!
@sykwookiee
@sykwookiee 6 лет назад
Pat Hayes hey man...I ride a Harley and I gotta say that there are much faster and more powerful engines out there....but that SOUND! And the simple fact that second gear uphill will put a smile on your girlfriends face that Ajax won't take off! If you're after speed, use a Kaw 1100 from the 70s...if you're after style, go with Harley...on a golf cart, ANYTHING is gonna be badass...make videos...I actually can't wait to see It...don't let the Harley haters sway your decision...l8ah ďà wòöķįęè
@jakestech28
@jakestech28 6 лет назад
Don't get me wrong, they are fantastic for torque. But something of that engine size should make more. But it's all part of the loud push-rod heritage that has made them so popular.
@jonathangottschalk7795
@jonathangottschalk7795 6 лет назад
The purple is awesome
@mof4104
@mof4104 2 года назад
Love this idea, wanna put this engine/trans on my street legal mb200, thanks for the video
@MessiHair
@MessiHair 6 лет назад
Can't wait to see the kart finished up! Also this is the only thing you'll be banging gears in since what happened with your miata lml sorry :P
@BakedPrawns
@BakedPrawns 6 лет назад
Love your channel but was getting really bored of the usual predator and torque converter stuff. Love that you’re diversifying!
@jarrhead3538
@jarrhead3538 5 лет назад
How about shifter and torque converter? That’s what I am doing on my racing mower
@ise_cube6658
@ise_cube6658 6 лет назад
i love the sound of the welder
@codycarse
@codycarse 6 лет назад
Finally a lifan!
@thewraith1977
@thewraith1977 6 лет назад
You guys need a little intro vid for your channel. Great content!
@jayssontansey6832
@jayssontansey6832 6 лет назад
About time!
@muddyboy0636
@muddyboy0636 6 лет назад
That purple is mint
@Jakefrc
@Jakefrc 6 лет назад
Man this thing is going to be faster than the drag kart!
@Sunnymalton
@Sunnymalton 6 лет назад
nice vid :)
@ethanmcmillan475
@ethanmcmillan475 6 лет назад
I've been wanting to start building my own go kart for a while now, any suggestions on how to get started? Love the channel and keep up the great vids 👍
@jaywalker2213
@jaywalker2213 6 лет назад
Damn your friend does GREAT work...
@AdamsWorld84
@AdamsWorld84 6 лет назад
Haha! I love your rooster!!! I had a bantam japanese rooster who would attack me any chance he got, and one day i tripped over and he jumped on me and bit my lip and after that i'm always more cautious around them too! Love this new 5 speed build!! keep up the awesome work guys love every video
@MrMno44
@MrMno44 6 лет назад
Got your back
@cedargroveslimgaming5171
@cedargroveslimgaming5171 6 лет назад
Roosters got Ike shook 😂😂😂😂
@sheldonhall4572
@sheldonhall4572 6 лет назад
I would deffinately suggest getting it completely sand blasted and powdercoated to make it last longer as well as to inspect the frames for cracking.
@vaoutdoorssportsman3555
@vaoutdoorssportsman3555 6 лет назад
Ike, the rooster whisperer 🤣
@lukasvanderputten7349
@lukasvanderputten7349 6 лет назад
The go-cart overlords right here
@georgegarner6905
@georgegarner6905 3 года назад
In 1983 put a 125 Suzuki RM dirt bike motor on my bob cat go cart. Ran it on a private track open series. It was awesome. On the quarter mile it ran 107 mph. I tried my 250 Yamaha yz on it but I couldn't get the front end to stay down on turns and blew the aluminium rims off the drive axle.
@trav_thesav_
@trav_thesav_ 6 лет назад
Hope to see you guys hit 500k subs this year. I’ve been subbed since 2014 I believe when you guys did the radio flyer rat rod
Далее
5 Speed Racing Kart Build (Pt. 2)
13:23
Просмотров 297 тыс.
200cc Shifter Kart FIRST RIDE
16:15
Просмотров 376 тыс.
200cc Shifter Kart Build: First Fire!
19:07
Просмотров 377 тыс.
Making Crazy 500cc GoKart
32:01
Просмотров 3,2 млн
How to build an INSANE electric Go kart!
16:57
Просмотров 75 тыс.
ROTARY POWERED SHIFTER KART Returns!!! Major Upgrades!
15:30
Mobile Wheel Polisher ##❗️❗️
0:19
Просмотров 8 млн
ВЫХЛОП на Hyundai Solaris #shorts
0:57
Просмотров 801 тыс.