We TURBOCHARGED his TD42 Patrol for UNDER $1000 | NA Diesel 4x4 Turbo Install Guide! 

wat, a 4x4 channel not spending 20 large on a turbo upgrade, speechless. take not other channels, real world not fantasy world. well done on the merch lads. well done all round.

You all looked so excited it’s good to see you haven’t lost the fire boys

Nothing wrong with the ht18 for a reliable touring rig.

Just a tip guys, when you are going to hit a stud to try and jar them loose put the nuts on first in case you damage the start of the threads. Keep up the good work .

Quick easy tip. If you have a mig welder place a flat washer over the hole where the broken stud is. This will protect the surface surrounding the broken stud. Then grab a similar size nut and hold it against the washer. Make sure the end of the broken stud is clean. Weld to the end of the broken stud to the inside of the nut. Let it cool a bit and hopefully the weld is strong enough to wind the broken stud out. Repeat if the weld breaks.

One of the best things I've done is gotten titanium exhaust studs and nuts, never gonna rust out never gonna snap

Some Aussie Arvo Beanies would be freakin grouse. Cheers guys

Nice effort fellas, getting it done. Ps save yourself the bother and don't run the coolant limes to the turbo at all. It's common practice with diesel to run them without it. Gturbos badboy for example doesn't have coolant ports in it all all. It also takes some load off your cooling system as well. OEMs figured this out eventually and most diesel built after about 2005 will not have coolant galleries.

Woohoo merch! Order placed guys hoodies and shirts look great!

You fellas are killing it. Great usable tech yet again

👍👍👍 Another great vid. I really like the way you go about things and your thought processes. You have what is essentially a factory turbo (with all the obvious benefits of that) fitted for a grand. Every mod you have done on this jigger has been well thought out / planned and for a fraction of the cost that most blokes would typically incur 😎 Kudos to you 👍👍👍

Great merch. Send the same map with orders printed on quality paper so you can tick off on that at home and frame when your done. Run a competition for photos at each spot

Great Video boys, try cleaning the sump in mums dishwasher. Works brilliant. Regards Alex

Lucky with the oil feed grub screw! My had rounded off so had to pull a risky one and use an easyout on it. Drilled through the screw and started leaking oil!

Been hanging for this one boyyyssss

Drinking game for “T” as in T piece 😂

This is the type of content we love, fucking awesome work

Build up the broken studs with a tig welder , then weld a nut to it the heat will loosen it

Give Adobe Podcast a shot, for cleaning up the audio. Or if u use Davinci resolve there is a voice enhance feature. Great episode!

20 likes in 2 minutes because we all know this is going to be a good video

finally some good youtube merch that you wont get bashed for wearing, its on my list

Just placed my order cheers boys, thanks for keeping the pricing So reasonable 👌👌

I won't draw coolant from the bottom of the block. Any debris that's in the cooling system settles in the bottom of the block and could end up in the turbo. I'd rather get the correct turbo thermostat housing and plumb into that. Otherwise good job lads👍👍👍

I had the same thing when I put a turbo on my GQ, that rear manifold stud. Had a local mechanic come over to remove it and it resulted in him drilling through the stud and into the head, destroying the head. Ended up costing me a fortune to fix his f@#k up and of coarse he split and didn't except liability. Its still in pieces sitting in my shed as I couldn't afford the parts at the time and now due to health cant work...

Love your work guys. Thanks for keeping me entertained.

Absolutely love your stuff boys! Been a follower since day one and can’t wait to see the awesome content you continue to create 💪💪💪

Check out an aftermarket stainless or alloy air box since the factory plastic ones tend to crack with age and your motor will then suck in dirt, had this happen of 4.2 GU ute

Design is amazing & another great video !!!!🙌🏽🙌🏽

Shirts are mad as boys. I must say I am impressed. I never buy Murch from any RU-vidrs. But you guys got me. Can't wait for my parcel. Cheers.

Next time you boys are down at the pub say hello to Jamie from the stock feed store for me thanks

Should make the next designs with a tick box next to them to mark the spots you’ve gone.

100k by the end of the year boys, keep sendin it

Byfeild, 5 rocks and pistol gap, had too mention cause thats my local spot.

Absolutely love your channel guys!

From America, very good video. I’m sure you guys are representing Australia very well.

Brought the jumper and sticker, looking forward to slapping it on the td😝

awesome stuff bois very very interesting and informative good onya guys give this mechanical mission a go (i wouldn't not that confident lol ) anyhow big thumbs up 👍

Good work boys it will be the best mod you'll do 1 of my first videos I made was how to fit after market temp gauge on the td42 haha

Great work lads!

if ya ever do it again like upgrade, bin the genuine manifold studs and use m10 unbrako grub screws. also, that sealant tastes a lot worse than it smells! 🤣

Don't worry about that bottom right exhaust stud, I snapped mine off and just left it not leaking or anything. Pretty much a motor out job to replace it aha. But good work

My mates td42 swb had the back stud snap as well turns the cab into a nox prison on long drives haha

Just a quick one, any reason you didnt just get your mate to mig weld in the 3/4bsp (or whatever size) threaded socked? you can just get those in mild/stainless whatever, weld them where ever you want. Don't see anyone doing much brazing these days (not thats theres anything wrong with that). Also unless the bottom end has TTY bolts, when the sump is off is a good time to inspect a big end/main bearing, see what sort of condition the engines in! just something I do for situational awareness

Have been really loving your content lately - awesome work guys! Just ordered some merch :)

Love your content lads!!! I have a TB42 the same as Dan. Especially love vids on his rig as gives me good direction. Saw the merch & ordered a hoodie straight away. Keep it up

finally, some merch. my family is sick of the stickers being all over the house and car

You beauty I just finished turboing my GQ yesterday should have done it a long time ago

Shirt and some more stickers ordered! Thanks boys! 🤙

Got my order in fella's. Great little vid. Hope the merch is great. Keep it up lads.

Well done boys

I think thats a factory option snapped exhaust studs there i had the exact same snapped ones on both of my engines

Great vid fellas! Just ordered a sticker and shirt 👌 they look mint.

Don't need water man! Even Nissan got rid of it on later model and no after market kits run them!

directional mic to cut the rain noise out

Fuck you can hear that rain pouring on the shed at 6:59

ill be getting a hoodie for sure before your pre order date

Great job turbocharging the GQ lads! Merch looks mint too 🤙🏻

Good onya lads , bout bloody time you have some merch , pay day I’ll order a hoody & shirt for sure . Might grab a sticker or 2 for my gu

Any link to the coolant return T piece?

Those mani gaskets will fail in around 2 months go with mls ones

Omg im fishing right now But im leaving to go home and watch this ahah

should get a pin board, pin a shirt up and everyone you go chuck a red pin 📍. little idea for ya! hahah

shirt order is in cheers boys the gq is getting minty

Is that the just race parts 14in1 gauge? If so mate you got your self a solid setup. Love mine. Ive changed cars twice and its easy enought to remove and install. Always been acurate and the alarms and peak are so nice to have in the sand. I must say though. You made me cringe when you shocked those studs with the hammer without a nut on the end. 😅 Keen to pick my self up a hoodie for sure guys. Ive been around since day dot for the most part and very keen to see where you blokes go with this channel. I expect to see 100k subs sooner or later 😉

Ripper vid guys! Yeww

Good video once again Liam loving the content.

Great video guys..very helpful ✌️👍

Sick shirts and stuff going to order one now

Picked up a shirt. Thanks boys.

Hey guys for the coolant temp sensor can you use a T piece to fit the factory thread instead of drilling and tapping a new one?

Finally been waiting for this day for so long

Good stuff. Looking forward to the end result👍👍

wicked! just ordered a shirt. awesome design lads very unique can wait to rep it.

Are you putting an Intercooler on as well!.

Up 5 rocks

Great show guys !!!!!

use a genuine nissan air flilter, they work 100% better than any other filter

Cant wait to turbo my old 2h 60 series

Love the design on the back. Much better than just another big logo. Also liam you know better than to loxeal fittings in shit spots. It may not be soon but it will come back to haunt you.

Great job boys. Cheers Steve 🍺🍺🍺

RIP the Bunno's hoodie ;)

Fan from Apia Samoa 🇼🇸

Ditch the water lines 👍

Waking it up after 1/2 million km unreal

GO THE MERCH FELLAS !!! got my T stickers too , how bout you :)

Done! thanks guys

I have a LN46 2.2 diesel, non turbo. Going to add a turbo from a 2LT. I know it won’t add much power, but will it blow black smoke? Lol

can you please provide info on where to get the T piece to mount oil pressure sender?

Cracking video boys 👌👌🤙🤙

I'd be keen to buy some merch if you guys had it available in 4XL :-(

An odd question here but what is the lathe that is in the background? I think i may have the same one

Great job guys

Great video guys

Hello, I have a Nissan Patrol B40 engine. Can I install a turbo for it? I am waiting for your responses

Great vid, love watching. Quick question, can you get bigger size hoodies? Like 5xl or 6xl ? Thanks

this is brilliant!!

Take a drink everytime you hear "pretty much" ;)

Was that 1/8 npt you drilled out on the thermostat housing or 8 npt

Pumped boys order 2 shirts and a hoodie before even watching this video...

Bolt on