Тёмный

Weathering Model Airplanes with Oil Paints 

FlyingSModels
Подписаться 18 тыс.
Просмотров 92 тыс.
50% 1

This video shows how to use oil paints to add unique weathering effects to your model aircraft. Using a Hasegawa 1/48 F/A-18, I show how to use simple techniques to achieve advanced results with the use of White Spirits and oil paints.
#modelweathering #f-18model #weatheringwithoilpaints
Make sure to follow me online @
★ / flyingsmodels
★www.flyingsmodels.com
Thank you for your continued support to the channel and I hope that you are finding all the episodes informative and helpful.
Keep the comments and feedback coming as they help me adjust the content of the channel to better meet your needs as well as help to make me a better modeler!
If you are interested in seeing some of the building products that are currently on my bench, you can check them out at the links below:
1/48 Hasegawa F/A-18: amzn.to/3kMYe3Z
Oil Paints: amzn.to/3gkn4pp
White Spirits: amzn.to/3456iHk
Brushes: amzn.to/3iGW4kz
Silhouette Cameo Portrait: amzn.to/3cwmaUO
Tamiya Cement: amzn.to/3ghZWbk
CA glue: amzn.to/2Mn67x1
Solder Wire: amzn.to/2AzclXM
Pewter foil: amzn.to/39XpxWg
Dental Resin Powder: amzn.to/2BSEz0o
Tamiya Fine Putty: amzn.to/36turX3
Tamiya Tape: amzn.to/2WZbxED
Solder Wire: amzn.to/2Yr5tEj
Airbrush: amzn.to/36tu5zH
Compressor: amzn.to/2A4vkt8
Tamiya Paints: amzn.to/2LTSmph
Tamiya Thinner: amzn.to/3cUxOZE
AK Gauzy: amzn.to/3dr4Lxf
AK Thinner: amzn.to/302UXFU
Mineral Spirits: amzn.to/2yu67bf
Tamiya Fine Putty: amzn.to/36turX3
Sanding Pads: amzn.to/3c5io3K
Copper Wire: amzn.to/3eGLPL2
Razor Blade: amzn.to/3d0OkqW
Olfa Circle Cutter: amzn.to/2Avly3V
Evergreen Styrene: amzn.to/2B4zJN2
Micro Drill: amzn.to/2Zw1Rmx
Straight Pins: amzn.to/3bVmlb7
The Camera I use to shoot the video: amzn.to/3bXlMxl

Развлечения

Опубликовано:

 

19 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 335   
@johnnypenso9574
@johnnypenso9574 3 года назад
Short and sweet w/o the 20 minutes of blah, blah, blah that often accompanies modeling videos. You've earned a subscriber!
@FlyingSModels
@FlyingSModels 3 года назад
Thanks for the kind words and the sub. I try to keep em short and sweet but some of the build ones do run a little longer. Sorry for the blah, blah on those :)
@dennis3043
@dennis3043 3 года назад
I Keep coming back to this video for advice. Great tips!
@FlyingSModels
@FlyingSModels 3 года назад
I'm glad that it helps! Let me know if you have any other questions in the future. Cheers!
@acosacca1908
@acosacca1908 3 года назад
Amazing tutorial!!! Thanks for sharing!!
@FlyingSModels
@FlyingSModels 3 года назад
Thanks for watching! Hope it was helpful.
@zombiecreations1447
@zombiecreations1447 3 года назад
Thanks for the great tip for bring more depth to building and detail.
@FlyingSModels
@FlyingSModels 3 года назад
You bet. Hope it helps!
@danrose8278
@danrose8278 3 года назад
So helpful! Thank you for putting together such a simple video for something that I thought for sure was going to be really complicated!
@FlyingSModels
@FlyingSModels 3 года назад
You bet. Give it a try. Not complicated at all. Let me know how it works out for you.
@joemoore4027
@joemoore4027 3 года назад
Great information on using oils. You make it simple and clear. Perfect results.
@FlyingSModels
@FlyingSModels 3 года назад
Thank you, Joe. I hope that it helps out. Happy Modeling!
@johanblume2621
@johanblume2621 3 года назад
I’m so looking forward to the F-18 build video. My absolute, favorite jet... plus, with your professional skills it sure will come in handy as I learn.
@FlyingSModels
@FlyingSModels 3 года назад
Thanks, Johan. I'll actually likely be completing a 1/48 F/A-18F prior to the "C" model I used for the demo. Just too many projects all at one time. The struggle is real..haha.
@stephenbridges2791
@stephenbridges2791 3 года назад
I have that exact airbrush. Love it.
@FlyingSModels
@FlyingSModels 3 года назад
Yep, I've been really happy with it. And spare parts are far easier to obtain than my old Tamiya airbrush. Cheers!
@billbuchanan1263
@billbuchanan1263 3 года назад
I'm loving these videos! Relatively short and to the point with lots of great info and really well done. I really enjoy and appreciate them.
@FlyingSModels
@FlyingSModels 3 года назад
Thanks, Bill. I’m glad you like the format. I figure it’s better to just share the approaches in a brief and straightforward way rather than dragging things out. Gives the modelers more time to use the techniques on their own builds 😁
@stevea21sc82
@stevea21sc82 3 года назад
Thank you. A really informative video. Great results!!!
@FlyingSModels
@FlyingSModels 3 года назад
Thank you. I hope it helps! Cheers!!
@brianc1701
@brianc1701 3 года назад
Excellent tutorial! It would have never occurred to me to do this in the painting stage, I usually apply oils after the panel line wash over a flat coat at the end of the weathering process. A new tool for the box! Thanks!
@FlyingSModels
@FlyingSModels 3 года назад
Thanks. I like to do it in stages. I’ll add more after the decals but this just helps her the initial painting effects about where I want them.
@panzer-meister
@panzer-meister 3 года назад
It's very impressive effect. Actually, many modelers have their own way. I got a lot. Thanks for uploading.
@FlyingSModels
@FlyingSModels 3 года назад
Indeed. Many modelers use a variety of techniques to get the look they want. The great thing about the hobby is we can learn from each other and adjust our own techniques along the way!
@scottlinder9882
@scottlinder9882 3 года назад
Thank you for this, I did not realize it was possible to put oil paint over Tamiya without a clear coat. I will be giving this a try very soon!
@FlyingSModels
@FlyingSModels 3 года назад
Hope you like the results. Just make sure to lay down that coat of white spirits and you'll get some really good results. Let me know how you like it.
@DKlavdious
@DKlavdious 3 года назад
Your white oil paint technique is spot on! Going to use it in the following days on a Desert Storm Camouflage Buccaneer.
@FlyingSModels
@FlyingSModels 3 года назад
Really appreciate the good feedback. I look forward to hearing (and maybe even seeing) your results with it on the Buccaneer. That is one that I'd like to do myself.
@theotherroad6654
@theotherroad6654 Год назад
You’ve added a new technique to my weathering toolkit. By pre washing with spirits then being able to add oils straight from the tube, I have unlimited control of the process. Thank you for taking the time to make this video.
@FlyingSModels
@FlyingSModels Год назад
Glad it helped. I appreciate you taking the time to provide some positive feedback. Happy modeling!!
@CarlosTorres-ow9qr
@CarlosTorres-ow9qr Год назад
Thanks for the lesson I’m working on the space shuttle monogram 1:72 looking forward to watching some more of you great videos thanks
@FlyingSModels
@FlyingSModels Год назад
Thank you for the kind words, Carlos. I look forward to seeing some pics of your shuttle. Feel free to share over on my facebook page.
@romansthirteen-four8626
@romansthirteen-four8626 3 года назад
Great content - I’m going to utilize this on my spacecraft that are used to enter atmosphere - especially my Bandai & DeAgostini Millennium Falcons. Excellent commentary as well.
@FlyingSModels
@FlyingSModels 3 года назад
Really appreciate that. I hope it works out well for you on your spacecraft models. Keep me posted on those.
@balticspirit3082
@balticspirit3082 2 года назад
Very informative, thanks!
@FlyingSModels
@FlyingSModels 2 года назад
Thanks for the feedback. Hope the video helps a little.
@davidcole333
@davidcole333 3 года назад
I'm trying this out on my Airfix 1/72 Curtiss Hawk. It took me a few times, but I'm getting the hang of it and I'm starting to see results that I like. This tutorial is well explained and easy to follow.
@FlyingSModels
@FlyingSModels 3 года назад
Glad you are trying it out, David. It does take a little while to get the hang of things and determine the look you like. I appreciate the feedback!!
@joemoore4027
@joemoore4027 3 года назад
Great video. Answered and showed a key point in weathering a kit that scares off most builders ! Keep the tips coming ! Cheers.
@FlyingSModels
@FlyingSModels 3 года назад
Thank you, Joe. Hope that this one (and the others) continue to be useful to our modeling community! All the best, Chad.
@shannongravois9897
@shannongravois9897 3 года назад
Superb!!!! Your painting skills are elite and always make your work stand out. Bravo!
@FlyingSModels
@FlyingSModels 3 года назад
Appreciate that, Shannon!
@robertflorquist7024
@robertflorquist7024 2 года назад
I have been building models since I was about 8 years old, I'm 63 now and I have learned so much. Been building a 1:72 Bell Helo and I have used a lot of his ideas, it's turning out great. Really enjoy the videos.
@FlyingSModels
@FlyingSModels 2 года назад
Thanks, Robert. Glad that the videos have helped a little. Thank you for supporting the little community here by providing some good feedback. Happy Modeling and enjoy that Bell Chopper!
@juanjaramillo1854
@juanjaramillo1854 2 года назад
Superb tutorial...thank you 👍
@FlyingSModels
@FlyingSModels 2 года назад
Thank you. I hope it helped a little.
@tonyperez4791
@tonyperez4791 3 года назад
Great Tutorial ! I just got a set of oil paints yesterday and was wondering how to use it, Thanks to you , now I have an idea of what to do. Hope you and your loved ones are well ! Take care, Tony
@FlyingSModels
@FlyingSModels 3 года назад
Thanks, Tony. I hope the same for you. If you have any questions on the use of the oils, just let me know.
@PerisModels
@PerisModels 3 года назад
Excellent tutorial I always leave the oils at the end but I might give it a go 🤗🤗🤗👌
@FlyingSModels
@FlyingSModels 3 года назад
Thanks, Peri. I use oils at the end as well but I like to use them early to create extra effects that I have a hard time creating if I use them over the gloss coat.
@rhettwampler2328
@rhettwampler2328 3 года назад
Looking forward to using this on my next model properly. I already had a gloss coat over the base coat on my current F-14A and getting the oil weathering to look right has been a bear; now I know to try adding a bit of flat to change the surface texture.
@FlyingSModels
@FlyingSModels 3 года назад
Yep, the flat texture will help. Hope you like the results when you try it. Takes a little practice to get the effect you like but it’s a pretty forgiving and flexible technique.
@user-pn3rr3id2b
@user-pn3rr3id2b 3 года назад
Perfect Techinque!!!!!!!!!!!!!!
@FlyingSModels
@FlyingSModels 3 года назад
Thanks! Glad you liked it.
@bubbapipe
@bubbapipe 3 года назад
Okay Mr....you need to post more videos so we can all enjoy your work. Great how too video...love it.
@FlyingSModels
@FlyingSModels 3 года назад
Thanks. I’ll keep working and posting as fast as I can 😉
@SprueFascinationChannel
@SprueFascinationChannel 3 года назад
Lovely workflow, I enjoyed it 👍
@FlyingSModels
@FlyingSModels 3 года назад
Appreciate that. Glad you liked it!
@mirrorblue100
@mirrorblue100 3 года назад
This is a neat technique - I'm going to use this to create some heavy exhaust staining on German piston engined aircraft models. Thanks!
@FlyingSModels
@FlyingSModels 3 года назад
Excellent. I look forward to hearing how it works for you.
@thepresident1971
@thepresident1971 3 года назад
Thanks alot. I was just thinking of a better technique to weather my typhoon with oil paints and bang coincidentally you uploaded the perfect video.
@FlyingSModels
@FlyingSModels 3 года назад
Glad it came at the right time. Look forward to seeing how you like it for your Typhoon.
@bradpark8355
@bradpark8355 3 года назад
Finally I found weathering skill that I want to learn...I subscribed! thanks! 😀
@FlyingSModels
@FlyingSModels 3 года назад
Glad that the video helped. I appreciate the thoughtful comment and the sub! Happy Modeling!
@rogerairborne
@rogerairborne 3 года назад
On a military aircraft, hydraulic fluid seeps from the pumps, tubing and filters behind the wheel wells and forms a yellowish sticky film on the belly panels. This sticky residue picks up grime frrom the runway, resulting in the dark streaks behing the main landing gear. Fuel and oil also contribute to the mess but hydraulic fluid is the main culprit. Very good detail. Excellent work.
@FlyingSModels
@FlyingSModels 3 года назад
Very good background on how and why aircraft pick up that dirt and grime. This foundational understanding helps to make more realistic effects so I thank you for providing to the community here. Thanks for taking the time out to give this good feedback! Cheers!
@nenadmomic
@nenadmomic 2 года назад
Awesome video! Thanks for sharing!
@FlyingSModels
@FlyingSModels 2 года назад
Thank you!
@nenadmomic
@nenadmomic 2 года назад
@@FlyingSModels was really surprised when I saw that you apply weathering to base color just with coat of white spirit over it. And it makes so much sense! I was kind of, following the "traditional" way of, having the model glossed first and then to the weathering and play with oils. Modelling for so long and never came across that technique. Also, loved when you've applied light color of base paint over weathered area and it still the weathered tone was showing. Will definitely adopt these techniques.
@FlyingSModels
@FlyingSModels 2 года назад
@@nenadmomic It's another useful weathering tool in the arsenal. Hope it works well for you.
@GiorgioBeltrammi
@GiorgioBeltrammi Год назад
Thanks a lot. Very useful tutorial 🙂
@FlyingSModels
@FlyingSModels Год назад
Glad it was helpful. Appreciate you taking the time to provide the feedback!
@mikeglenn1000
@mikeglenn1000 3 года назад
Thank you! Very Informative and useful! Mike G
@FlyingSModels
@FlyingSModels 3 года назад
Thank you, Mike! Glad the vid was useful.
@mikeglenn1000
@mikeglenn1000 3 года назад
I'll keep watching...
@FlyingSModels
@FlyingSModels 3 года назад
@@mikeglenn1000 Thanks, Mike. Appreciate that.
@zsoltkonkoly1250
@zsoltkonkoly1250 2 года назад
Very good video from weathering working
@FlyingSModels
@FlyingSModels 2 года назад
Thank you for the feedback. I appreciate it! Hope the video helps.
@Travis.O
@Travis.O Год назад
Thank you!!!
@FlyingSModels
@FlyingSModels Год назад
Thank you!
@bernardberben4852
@bernardberben4852 3 года назад
Loved this video! I was looking for a good video on this but couldn't find any. I found this video and thought it was straight to the point and very easy to do. And thanks for leaving a link to the paints, this deserves a sub. Keep up the good work!
@FlyingSModels
@FlyingSModels 3 года назад
Thank you for the thoughtful comments and for the sub. I hope that the video helps. The techniques are really easy to employ and it's really versatile. You can use all kinds of different colors to achieve a wide variety of nice effects. Cheers!
@howardkilburn2024
@howardkilburn2024 2 года назад
These videos are superb, particularly like yr tutorial on using oils, well done sir, keep em coming
@FlyingSModels
@FlyingSModels 2 года назад
Thank you, Howard. Life has gotten in the way of videos lately but I hope to be back at it soon. Thank you for the kind feedback.
@gigiying6493
@gigiying6493 3 года назад
Inspiring video
@FlyingSModels
@FlyingSModels 3 года назад
Thanks!
@jasonc9194
@jasonc9194 3 года назад
Thank you for the video. I would have never considered applying white spirit to acrylic paint as I would have worried about it removing the paint. Looking forward to trying this technique. Subscribed :)
@FlyingSModels
@FlyingSModels 3 года назад
Thanks for the sub and I look forward to hearing how the technique works for you. Cheers!
@mraide
@mraide Год назад
Great tip
@FlyingSModels
@FlyingSModels Год назад
Glad it was helpful!
@elimarpiratelo1617
@elimarpiratelo1617 3 года назад
Now I know how to do it on my 1/48 F4J. Thanks a lot
@FlyingSModels
@FlyingSModels 3 года назад
Sure thing. Hope it helps!
@wildolan
@wildolan 4 месяца назад
cheers. very interesting
@FlyingSModels
@FlyingSModels 4 месяца назад
Thank you for the feedback. Hope the vid helps a little.
@jazzmusician46
@jazzmusician46 2 года назад
Thanks Chad. Once again, I’ve learned much from you. It’s now the time to practice. 😁
@FlyingSModels
@FlyingSModels 2 года назад
I'm glad to hear that. I hope the videos continue to help.
@andylees2940
@andylees2940 4 месяца назад
Very useful and informative and to the point, no need to fast forward thru padding waffle! Ty👍
@FlyingSModels
@FlyingSModels 4 месяца назад
Thanks! Appreciate that feedback. I'm not a big fan of videos where I have to watch the grass grow before getting to the point(s).
@tonytorres4570
@tonytorres4570 2 года назад
Thxs 🙏🏻
@FlyingSModels
@FlyingSModels 2 года назад
Thanks for the feedback!
@adriancabrera3014
@adriancabrera3014 3 года назад
Wow great video ¡ I've been trying to improve my models and this video result very helpful, even though I use brushes instead of airbrush I hope i can use some of the techniques ¡ Thanks A lot ¡
@FlyingSModels
@FlyingSModels 3 года назад
Thanks! I think this should work equally as well over brush paints, as long as they are flat colors.
@fernandosanmiguel7416
@fernandosanmiguel7416 3 года назад
Thank you very much for this tutorial. I always apply oils after a gloss varnish coat. I find that in places where the gloss has not gone down too well, the oils "spread" on the surface getting a stain or "over dirty" non desired effect so it surprises me how well you manage to remove it and blend it with the paint base coat, not having used a varnished surface. Thanks again!
@FlyingSModels
@FlyingSModels 3 года назад
The white spirits applied before the application on of the oils really helps to change the way the interact with the flat surfaces. Appreciate the feedback. Happy Modeling!
@JT-bg2vy
@JT-bg2vy Год назад
That looks great! I use a similar method on the 700 scale rc AH-1 I'm building. I use a thinner that I make at home instead. Water, isopropyl, glycerin. I will also put mix into my airbrush since it'll cover nicely and I can go back over painted areas and use the 1st stage on the airbrush to move and smear as desired for the rusty dripping running look. Thank you for the video, I'll give it a try!
@FlyingSModels
@FlyingSModels Год назад
Thanks for that tip. I'll give it a try. Sounds like another good technique to have in the arsenal.
@JT-bg2vy
@JT-bg2vy Год назад
@@FlyingSModels I'm sorry I forgot to mention it's with acrylic paint. Works well for me though. I haven't been doing this more than a month though so my technique(s) is a bit entry level. You have it down! You make it seem almost effortless for the results. Thank you!
@giorgosgr2
@giorgosgr2 3 года назад
nice tutorail mate thanks for sharing
@FlyingSModels
@FlyingSModels 3 года назад
Thanks for the feedback. Hope it helps!
@giorgosgr2
@giorgosgr2 3 года назад
@@FlyingSModels I have already tryed this technic after I see the video and the results was awasome thanks for tutorial mate
@FlyingSModels
@FlyingSModels 3 года назад
@@giorgosgr2 Excellent. I'm glad you liked it and it worked out well for you. If you find any new ways, make sure to let me know :)
@hurbrowns5397
@hurbrowns5397 3 года назад
Perfect likes! no dislikes!
@FlyingSModels
@FlyingSModels 3 года назад
A little surprising, actually ;)
@jameswaldon3809
@jameswaldon3809 3 года назад
Great tips, Chad. Looking forward to the Hornet build video. Be careful with the landing gear on this one. I actually broke one of the main landing gear legs while trying to position it. It wasn't as strong as I thought it would be.
@FlyingSModels
@FlyingSModels 3 года назад
Thanks for the heads up, James. The kit I have has the metal gear so maybe I'll dodge the bullet on this build.
@pauka13
@pauka13 3 года назад
Great explanation and result! How long do you have to wait between layers to dry and add the next one?
@FlyingSModels
@FlyingSModels 3 года назад
I don't wait at all. After I finish up one layer of oils, I start with another.
@fishnchips5826
@fishnchips5826 3 года назад
Aww man i would love to see the build video of the rafale :( anywho great tips thank you for sharing 🤘🏾
@FlyingSModels
@FlyingSModels 3 года назад
Yep, if only I had been making videos then. Maybe in the future I'll tackle it again. Was certainly a fun build.
@swing.wing_singh
@swing.wing_singh 3 года назад
Awesome tip. Quick question. So you use oil paint weathering without the gloss coat? I've always been told that gloss is necessary to weather
@FlyingSModels
@FlyingSModels 3 года назад
Thanks. I use both techniques, oil over flat paint with a coat of white spirits laid down first, as well as oil over a gloss coat later in the build. They just provide different finishes and effects. Oil over flat will give extra weathering that is hard to get when you put oil over gloss.
@spruetherapy
@spruetherapy 3 года назад
Absolutely fantastic. Cannot wait to try this on my Airfix Wildcat! Thank you so much for the video. Dan
@FlyingSModels
@FlyingSModels 3 года назад
Thanks, Dan. I used it on my little Wildcat too. Really provides some nice effects.
@spruetherapy
@spruetherapy 3 года назад
@@FlyingSModels Ah yes, I've watched your Wildcat several times. Loving your work. 👍
@FlyingSModels
@FlyingSModels 3 года назад
@@spruetherapy Appreciate that! Look forward to seeing your wildcat.
@spruetherapy
@spruetherapy 3 года назад
@@FlyingSModels Sadly, after trying for most of the day the effect just doesn't seem to work for me. However I am using odorless thinners instead of white spirit. Is that the issue? I either get a flooded surface with lots of blotches or a wash that just sits in the panel lines that I can barely notice. I'm using Abteilung 502 oils. Very strange!
@FlyingSModels
@FlyingSModels 3 года назад
@@spruetherapy Sorry to hear that. A couple of things...what brand of paint are you using to paint the flat coat? I have tried thinner and it doesn't work like the white spirits, not sure why from a chemical perspective but it is different. And lastly, I have not had good results using the Abteilung line, for some reason. I get far better results with a good quality artist oil from Windsor and Newton or Georgian.
@sohaibshehzad2052
@sohaibshehzad2052 3 года назад
Subscribed.
@FlyingSModels
@FlyingSModels 3 года назад
Appreciate the sub! Cheers!
@mrcarlo1966
@mrcarlo1966 6 месяцев назад
Thanks for another great video. Once this dries, will you be going over it with an overcoat of flat varnish?
@FlyingSModels
@FlyingSModels 6 месяцев назад
Thanks for the good words. Yes, once dry and decaled, I go over with a flat coat. I do put a varnish coat down before apply the decals.
@domfnl
@domfnl 2 года назад
Thanks for sharing this, really helpful and you explain it so clearly. Going to try it out on my current build (1/48 A-10). Can you do it over decals?
@FlyingSModels
@FlyingSModels 2 года назад
Thank you for the feedback and I'm glad that the vid helped. I hope you have good results with it on your A-10. I have also used the technique over decals but I'm a little more judicious about how I used it over them. I also make sure to use a decal softening/setting solution before I apply the wash.
@domfnl
@domfnl 2 года назад
Awesome dude 👏
@kenshin73himura70
@kenshin73himura70 3 года назад
I get it now...🤦 3rd watching got it through... I got the memo...😒😆 getting old is not fun. Great vid.
@FlyingSModels
@FlyingSModels 3 года назад
It's a good bit different than what you'd expect so I totally understand. And it takes just a little practice to figure out how you like to work the oils. Let me know if you need anything else.
@lalajaan042
@lalajaan042 3 года назад
Hey mate, great work. Can i use this technique after using Tamiya spray cans (just before first gloss for decal) or you would recommend using it after gloss coat ? Cheers
@FlyingSModels
@FlyingSModels 3 года назад
I'd recommend trying it out on a spare part first. While the Tamiya spray cans are synthetic lacquer and might not be effected by the white spirits. I haven't tested that yet. The other thing is you want to apply the oils and white spirits over flat paint so that it helps to change the tone of the paint itself. Putting it down over a gloss coat will be more like a panel line wash. Hope this helps. Let me know if you try it before I do :)
@Dubs_Classic4
@Dubs_Classic4 3 года назад
Excellent tutorial. I am working on ROKAF F-15 which is dark grey in color. Which color is recommended for weathering. Is dark brown preferred color?
@FlyingSModels
@FlyingSModels 3 года назад
Thanks. I may try a little raw umber but it probably won't show up too well. You may want to try a lighter shade of grey and then after it's lightened just a touch with that, come back in with a few areas of raw umber to add a little extra "grime". Look forward to seeing your results. Please feel free to post some pics over on facebook/flyingSmodels. Best wishes!
@raudelsanchez8748
@raudelsanchez8748 2 года назад
Hey Chad! Thank you very much for you highly educational videos! This particular video is very good on my opinion. I'm starting to try weathering and inmy humble opinion, your technique gives a very realistic result. When you refer to using white spirit, do you mean alcohol? Thanks again and i'll definitely follow your work👍
@FlyingSModels
@FlyingSModels 2 года назад
Thank you for the feedback and I hope and am glad that the videos may be helpful to you. That's the whole purpose of them. With regards to white spirits, it is different than alcohol. Here are a couple of good options: amzn.to/3liTCn2 and amzn.to/2YZgCAb Hope this helps! Happy Modeling!!
@Blueberry-pv3iq
@Blueberry-pv3iq 2 года назад
love this video very helpfull is there any part one for the grey base paint tutorial ??
@FlyingSModels
@FlyingSModels 2 года назад
Thanks. I appreciate the feedback. I didn't make a part one for the base painting but you can see the basic techniques in other videos I've made. I usually use the same process, just with different colors. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kna1oak6wls.html
@Blueberry-pv3iq
@Blueberry-pv3iq 2 года назад
@@FlyingSModels awsome im going to make my 40k valkerie as this thanks :)
@f4cphantom2
@f4cphantom2 3 года назад
Thank you for this info and it looks great. Two questions. Is the white spirits the same as paint thinner or different? Will this work if your model is painted in oil paints not acrylics?
@FlyingSModels
@FlyingSModels 3 года назад
Thanks for the feedback. I would stick with artist grade white spirits, not paint thinner. Paint thinner will likely strip your paint. And only use it over acrylics. The white spirits will dilute the oils in the oil based paint. Hope this helps.
@f4cphantom2
@f4cphantom2 3 года назад
@@FlyingSModels Thank you very much for the info and tips. I really enjoy your videos. Have a great day.
@samueljrgensen417
@samueljrgensen417 Год назад
How long do you let the oil paints dry for? Thanks for the awesome videos mate!
@FlyingSModels
@FlyingSModels Год назад
Thanks for the feedback! In terms of dry time, I don't really let things dry. I just work in small sections and about as soon as I have them down, I use the white spirits to remove it and blend it into the paint. I let that dry for a few hours before putting any clear coat over it, though.
@pedroalbicastrense353
@pedroalbicastrense353 Год назад
Super technique , i go try myself . How Manu Time take the paint to dry , to continu the job ?
@FlyingSModels
@FlyingSModels Год назад
It's actually pretty fast since most of the oil paint is actually removed and/or imbedded in the flat paint surface. Really just a matter of minutes but I usually wait several hours to a day before putting a flat or gloss coat over it.
@65TossTrap
@65TossTrap 2 года назад
Thanks for the video. One question: do we need an overcoat before applying the oil?
@FlyingSModels
@FlyingSModels 2 года назад
Thanks for the feedback. No overcoat required. That's what helps the weathering process. The white spirit layer helps the oils blend into the flat acrylic paint layer.
@Evilwetness
@Evilwetness Год назад
@@FlyingSModels What about enamel paint user?
@rengawkf
@rengawkf 2 года назад
Are you applying the wash (oils) over what type base? is that model sprayed in oil or acrylic? Thank! great work!
@FlyingSModels
@FlyingSModels 2 года назад
I spray in acrylic and then put the oils over that with no gloss coat. Just put them right over the acrylic flat paint.
@joule9255
@joule9255 3 года назад
MORE oil paints toturials please
@FlyingSModels
@FlyingSModels 3 года назад
Roger that!
@cobusprinsloo
@cobusprinsloo 6 месяцев назад
Thank you for a very insightful tutorial. How long do oils take to dry?
@FlyingSModels
@FlyingSModels 6 месяцев назад
Thanks for the feedback. I usually wait a hour or two before I clear coat anything, just to be sure but some may want to wait longer.
@cobusprinsloo
@cobusprinsloo 6 месяцев назад
@@FlyingSModels thank you
@jakemccormick6068
@jakemccormick6068 3 года назад
Wow man im very impressed, instant subscribe lol. Your work is amazing. Could i commission your work? Id love one of your masterpieces
@FlyingSModels
@FlyingSModels 3 года назад
Howdy Jake. I appreciate your good words and thanks for the sub. If you want to talk about a particular commission job, feel free to contact me through the contact section over at: flyingsmodels.square.site/ Thank you again and talk soon, Chad.
@mardyart
@mardyart Год назад
Hahaha, "...still looks a little 'plane' to me..." brilliant!
@FlyingSModels
@FlyingSModels Год назад
For sure. Thank you for the feedback!
@Chablar89
@Chablar89 2 года назад
When you do the second weathering stage over the decals do you do it over a varnish coat?
@FlyingSModels
@FlyingSModels 2 года назад
Yes, at that point, I apply the washes (thinned) over a gloss clear coat.
@sebastienfouque550
@sebastienfouque550 3 года назад
Do you apply a gloss varnish before the technic with the oil paints or do you apply it on the paint job itself ?
@FlyingSModels
@FlyingSModels 3 года назад
I apply it directly to the paint.
@RobPearlman
@RobPearlman 3 года назад
Hi there, these videos are fantastic. I'm quite new to aircraft modeling and my goal is to develop the skill to build a really awesome looking Su-35 Flanker. Keep up the awesome content.
@FlyingSModels
@FlyingSModels 3 года назад
Appreciate the feedback, Robert. I'm sure you will reach your goal in no time. I wish you all the best with your Su-35 and all future builds! Happy Modeling!
@RobPearlman
@RobPearlman 3 года назад
@@FlyingSModels Thanks. I'm using your oil weathering technique on a 1/72 hurricane painted in a standard RAF 2 tone camo. Looks great so far and I can't wait to keep practicing. Cheers!
@FlyingSModels
@FlyingSModels 3 года назад
Excellent! I'm glad to hear that the technique is working well for you. Would love to see some pics of your Hurricane when complete. Feel free to share over on facebook/flyingSmodels. Cheers!
@nathanshultz9
@nathanshultz9 3 года назад
Thanks for the tips, I’m going to try this technique on my next build. I recently bought a gallon of odorless mineral spirits for use with oils. Have you used mineral spirits instead of white spirits for this type of work? If so, did you have any problems? Thanks
@FlyingSModels
@FlyingSModels 3 года назад
Look forward to hearing how it goes for you on your next build. I haven't tried it with mineral spirits and I'm not sure the differences in formulation. I use a good, high quality artist grade white spirits. Let me know how the odorless spirits works as it might save me some money :)
@nathanshultz9
@nathanshultz9 3 года назад
@@FlyingSModels thanks for the reply. As for saving money, that’s why I went this route. More bang for the buck so to speak!
@FlyingSModels
@FlyingSModels 3 года назад
@@nathanshultz9 I hear you. I may give it a try to compare and then maybe relay results in video form.
@nazgul_53
@nazgul_53 2 года назад
@Nathan Shultz @FlyingSModels so, I used a regular turpentine (which stinks) and it melted acrylic and plastic. THOUGH I still managed to get some work done before it melted. It gave me the result but then it melted, the outcome is I need to use other turpentine. so, finallym, which one iss less corrosive?
@ModelMinutes
@ModelMinutes 3 года назад
Might have to try this and “borrow” it for some if my builds 😂
@thepresident1971
@thepresident1971 3 года назад
Hey model minutes.
@ModelMinutes
@ModelMinutes 3 года назад
@@thepresident1971 Hi!
@FlyingSModels
@FlyingSModels 3 года назад
Borrow away. Let me know how it works for you.
@ModelMinutes
@ModelMinutes 3 года назад
@@FlyingSModels Thanks!
@b.vhidalgo4817
@b.vhidalgo4817 2 года назад
I love this tutorial. I'm planning to do the same with a 1/144 F-117 nighthawk. What oil colors should I use to do a weathering effect?
@FlyingSModels
@FlyingSModels 2 года назад
Thanks for the good words. For those black finishes, it can be easy to overdo it. I typically will mix up customs shades of dark grey/grey to get a little worn effect without it being too stark. I'd recommend trying out various colors on a test piece. Maybe even try some dark blues and browns. Hope it works well for you!
@b.vhidalgo4817
@b.vhidalgo4817 2 года назад
@@FlyingSModels thank you for your advice. I'll do it
@FlyingSModels
@FlyingSModels 2 года назад
@@b.vhidalgo4817 excellent. Let me know if you need anything else!
@b.vhidalgo4817
@b.vhidalgo4817 2 года назад
@@FlyingSModels I follow your advice and I got some interesting grey weathering effects following real pictures of weathered Nighthawks. Plus I did painting effects using metal colors and ammo mig acrylic transparator. Pretty cool stuff
@TJRohyans
@TJRohyans 3 года назад
I've noticed in a couple of your videos now that you don't seem to mask/protect wheel wells/cockpits when spraying near them. Do you not worry about overspray of one color over another? Another benefit of the oil weathering versus pastel chalks, is that the clear coat won't make them disappear.
@FlyingSModels
@FlyingSModels 3 года назад
Every so often I'll mask around things but most of the time, I just spray very fine lines around the openings. If I need to protect an open area, sometimes I'll used a piece of card stock as a "shield".
@amad9111
@amad9111 Год назад
nice tutorial, can u tell me at 02:47 what u add in dropper, (whts u mix with the colors).?
@FlyingSModels
@FlyingSModels Год назад
Thanks for the feedback. That is white spirits that I brush on before dabbing on the oil paints. Hope this helps. Let me know if you have any other questions. Cheers!
@user-fq6wy1tp9q
@user-fq6wy1tp9q 3 года назад
I have best results when blending with angular brush. It's probably just because I'm not experienced ( I've built around 10 models, mostly tanks, but my last two models actually look decent). Btw I have a question, which is best cheap airbrush for beginners ( if there is one)?
@FlyingSModels
@FlyingSModels 3 года назад
I say use whatever works best for you. No "right" answer on most things like this. If it works and you are happy with the results, then that's what's right for you. Glad you are getting the results you are after. As far as airbrushes, I'm enjoying my Badger Velocity Renegade but I also really liked my Tamiya Super Fine HG. They are both around 100 bucks. Not sure if that's cheap from a budget perspective or not. Here's a link if you want to check out the specs on the Badger: amzn.to/36tu5zH
@Lordcrill
@Lordcrill Год назад
Awesome video. I recently tried this however The white spirits removed the airbrush paint right off my model when I applied it- what did I do wrong?
@FlyingSModels
@FlyingSModels Год назад
Thank you for the feedback but I'm sorry that you had troubles with the white spirits removing the paint. What paint and brand of white spirits did you use?
@dilligaf2984
@dilligaf2984 4 месяца назад
Hey mate outstanding weathering techniques. I have a question. In this video you are applying oil paints from a tube, have you used a clear coat prior to applying oils? Secondly do you use acrylic clear coat when applying oils,? And also with the final clear coat do you use acrylic or enamel clear coat... Thankyou for uploading this outstanding video and greetings from accross the pond Australia
@FlyingSModels
@FlyingSModels 4 месяца назад
Appreciate the feedback. I'm not applying the oils over a clear coat as if I did, it would just be a wash that goes into recesses like panel lines and rivets. Putting it over white spirits applied to the base flat coat allows for the oils to be blended into the finish and create weathering effects in the paint itself. When I do apply a clear for the purpose of decals and such, I apply an acrylic clear coat, AK Real Gauzy, and then apply a flat coat after it's all said and done. Hope this helps. Let me know if you have other questions. Thanks again!
@nomankw
@nomankw 2 года назад
I was looking for something like this for a while and love the way you achieve this effect. I'm definitely trying it on my current build. Two questions if I may, 1. Will this work on something that has raised rivets? And 2. Will this work with turpentine instead of white spirits?
@FlyingSModels
@FlyingSModels 2 года назад
Excellent. I hope you have much success with the techniques. This will work with raised panels and rivets. I have another video up here that shows that too. Here's the link: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Tf6Q1Q2ipxk.html As far as turpentine, you can give it a try but I've always used artist grade white spirits. Let me know how it works if you do try it. Happy Modeling.
@nomankw
@nomankw 2 года назад
@@FlyingSModels thank you for your reply. I had a look at the second video also and found it very useful too. Appreciated. My question is how do you apply oil colour to raised rivets? I'm struggling to get a good dark outline on those rivets. And also, will you suggest using a white oil colour on a dearest camo to make the individual panels pop more?
@acosacca1908
@acosacca1908 3 года назад
Sorry Chad... Just a question...but you use oil color before to use a gloss coat (finish effect) right? Thanks for all your Amazing tutorial!!!
@FlyingSModels
@FlyingSModels 3 года назад
Yes, this technique uses oil paints applied before the gloss coat but over a layer of white spirits. Thanks for the feedback.
@MrBadger1978
@MrBadger1978 2 года назад
Really fantastic! I'll be trying this on my Meng FA18. A couple of questions: 1. For how long do you need to let the oils dry before putting any other coats (varnish, clear coats etc) over top of them? 2. Which brand of clear coat do you use (Future is not available in my part of the world!)?
@FlyingSModels
@FlyingSModels 2 года назад
Hope it helps and I look forward to maybe seeing some pics of your F/A-18 if you want to share them through Facebook. As far as drying time, I usually only wait a couple of hours or so before clear coating. It dries really fast since you are putting it more or less as a filter/wash over flat paint. And on the clear, I use AK Real Gauzy. Works a lot better than Future in my opinion. Let me know if you have an additional questions. Happy Modeling!
@MrBadger1978
@MrBadger1978 2 года назад
@@FlyingSModels thanks so much for your reply. I'll absolutely post pictures when it's done. Your videos have inspired me to do some serious weathering - something which I'm usually too scared to do for fear of wrecking my model!
@FlyingSModels
@FlyingSModels 2 года назад
@@MrBadger1978 Excellent. I'm glad that they have helped and look forward to seeing some pics! Happy Modeling!
@cadenwilliamsllc2967
@cadenwilliamsllc2967 3 года назад
Just to be sure, I don’t need to put a clear coat down before I put on the spirits? It won’t take off the paint or anything?
@FlyingSModels
@FlyingSModels 3 года назад
Nope, no clear required as long as you are using white spirits over acrylic flat paint. I've used this with both Tamiya and AK Real Colors acrylics with no issues. But to be sure, I'd run a test case with the paints you are using and spirits you have. Hope this helps.
@Botjer1
@Botjer1 Год назад
Im looking for some inspiration, I'm going to be painting Eldar Falcon gravtanks. Now they are tanks that fly... Should i paint vertical AND horisontal weathering? One type of weathering for when they stand or move slowly and one when they move at speed? That would make a weird crosshatch pattern?
@FlyingSModels
@FlyingSModels Год назад
That's an interesting thought. Not being familiar with the design or the operation, it would be hard to say. If they spend a lot of time on the ground and are prone to leaking, fading, rusting, etc., you would want to consider this in your weathering patterns. Certainly, their flight path and time of flight would also need to be considered for those areas where fluids were pushed along the flow streams. Not a perfect answer, I know, just some thoughts for consideration.
@charlybrown728
@charlybrown728 3 года назад
Did you seal your tamiya paints before you applied the spirits?
@FlyingSModels
@FlyingSModels 3 года назад
Nope, no sealer. Just white spirits then oils straight over the Tamiya paints.
@Gabriel4Drummer
@Gabriel4Drummer 3 года назад
I’ve build the same model of F18 last month :)
@FlyingSModels
@FlyingSModels 3 года назад
Bet it turned out even better than mine is. Congrats.
@Gabriel4Drummer
@Gabriel4Drummer 3 года назад
@@FlyingSModels No way! I have a long way to go. But having such inspiration from You will be a great adventure :)
@FlyingSModels
@FlyingSModels 3 года назад
@@Gabriel4Drummer I hope that I can continue to provide content that does inspire others to build more!
@adriancabrera3014
@adriancabrera3014 3 года назад
By the way I'm building an Airfix P-51D 1/72 but with the original Decals and paint scheme. :) Can I use oil paints for smoke stains ?
@FlyingSModels
@FlyingSModels 3 года назад
Look forward to seeing your results. Make sure to share them on the community tab or over at my flyingSmodels page on Facebook. II would recommend the use of pastels for your P-51 exhaust instead of this method since you don't airbrush. I think you will like those results better.
@adriancabrera3014
@adriancabrera3014 3 года назад
@@FlyingSModels ok thanks again for your pieces of advice ¡¡ I'll take my time with this mustang but for sure i'll look on Facebook ¡
@jsonlee01
@jsonlee01 3 года назад
Very nice! How long does it take for the oil paint to dry?
@FlyingSModels
@FlyingSModels 3 года назад
I don't really even let the paint dry before I start to remove it. I work in small sections and complete one section at a time. Once the oils are blended and/or removed with the white spirits, they are usually dry within a few minutes. Thanks for the good words!
@jsonlee01
@jsonlee01 3 года назад
@@FlyingSModels Thanks. The only time I used oil paints on a model was when I was a kid with limited resources and the wings of the plane I was building were yellow and for some reason, I had a tube of yellow oil paint. I applied it thickly and it never dried. LOL
@FlyingSModels
@FlyingSModels 3 года назад
@@jsonlee01 That's pretty funny. I bet that never did dry. This technique is a lot different as you are applying over a coat of flat paint that has been coated with white spirits. It's more of "filter" effect. Give it a try. It takes a little bit to figure out what you like and how best to get that look but it's another great "tool" to have in the modeling arsenal.
@jsonlee01
@jsonlee01 3 года назад
@@FlyingSModels Yeah, I had never worked with oil paints before and that was all I had. Like I said, I don’t even know where that tube came from.
@FlyingSModels
@FlyingSModels 3 года назад
@@jsonlee01 Now it's time to give 'em a try in a different application! Let me know if you try it, how you like it.
@richardmartin1432
@richardmartin1432 3 года назад
More info about your scratchbuilt Pucara please !
@FlyingSModels
@FlyingSModels 3 года назад
I need to get back on that project. I probably should make a video (takes a long time) on the process I used to create the master for the fuselage.
@richardmartin1432
@richardmartin1432 3 года назад
Thanks for the reply I think your channel is one of the best modeling channels I’ve ever seen and your results are spectacular I’ve had an interest in the pucara for a long time
@marcusmasaki925
@marcusmasaki925 3 года назад
Question do you have to use winser newton thinner or can u use any mineral sprites . Cause of rings around the area that have mineral sprites when dry. What can I do?
@FlyingSModels
@FlyingSModels 3 года назад
I haven't used standard mineral spirits myself. I always use an artist grade white spirits. Interested to hear more about the "rings" that you have seen. Sounds like maybe you are not blending the spirits into the surrounding areas. If you want to send a photo, feel free to contact me over at: flyingSmodels.square.site. Thanks!
@marcusmasaki925
@marcusmasaki925 3 года назад
@@FlyingSModels thanks for the info. ill try the winsor newton thinner. Thanks again and mahalo
@hafizuddinrahman4296
@hafizuddinrahman4296 Год назад
Do you topcoat before weathering?
@FlyingSModels
@FlyingSModels Год назад
Nope, just put the white spirits and oil right over the flat coat and blend them into the finish to get the desired effect. Hope this helps.
@amazonamazon4872
@amazonamazon4872 Год назад
What if youre using mrp's lacquers? Would using this technique hurt that paint?
@FlyingSModels
@FlyingSModels Год назад
I haven't tried mrp lacquers but I have used it over AK real acrylic lacquer and it doesn't hurt the paint at all. Hope this helps.
@danielcobb6486
@danielcobb6486 2 года назад
Will this work with turpentine instead of white spirit? Amazed it doesn't tarnish the tamiya base coat.
@FlyingSModels
@FlyingSModels 2 года назад
I have not tried turpentine but I have tried cheap mineral spirits and it does not work well. The artist or model grade white spirits is the way to go. They are more expensive but you don't use much and you certainly get what you pay for :)
@danielcobb6486
@danielcobb6486 2 года назад
Thanks for the reply - also - how long after applying the oils do you wait to apply the gloss coat?
Далее
Paint Realistic Weathered Aircraft
22:33
Просмотров 15 тыс.
ОН ТОЧНО ЗАЕДЕТ. ВЕЗДЕХОД АГ-34.
41:09
Проверил на логику певца L’one
00:17
would you eat this? #shorts
00:39
Просмотров 604 тыс.
How to paint and weather engine nozzles - 1/32 scale
11:54
P-39Q Airacobra - Arma Hobby 1/72 - Aircraft Model
18:30
Replicate real jet exhausts with basic paint mixes
8:35
Забота от брата 😂 #shorts
0:31
Просмотров 1,1 млн
Can this capsule save my life? 😱
0:50
Просмотров 3,3 млн
НУ И ВЕТРИЩЕ (@lacie_hendrix - TikTok)
0:17