Well This Is Embarrassing... Fixing Mistakes and Upgrading... Already

Подписаться 1,2 млн

Просмотров 40 тыс.

0% 0

Sometimes I rush into a project and the results are less than optimal.
The first clue is that I make more mistakes than I usually do and that's due to a lack of detail planning.
The second is I don't build-in the features I originally thought of because my overall confidence in the project was low while building it (and making so many mistakes).
Most of the stuff you'll see on RU-vid is made to look flawless and work perfectly the first time. Reality is that video is magical in that you can make an otherwise failed project look successful.
I won't say my miter guide was a complete failure, but it wasn't what I pictured it would be when I first started designing it.
I guess the lesson with this one is to have more respect for the design stage of the project, rather than taking the attitude that I can "fix it on the fly" when problems crop up. I can fix it, but it leads to a sub-optimal result and tarnishes my desire to use it.
The upgrade to indexed angles and rebuilding and reconfiguring the stop make this a worthy addition to my shop and a tool I'll be proud to say I made.
▶️ Project plans for sale: ibuildit.ca/plans/
▶️Support the work I do on Locals:
ibuildit.locals.com/
▶️ Patreon:
www.patreon.com/user?u=865843...
▶️ Join my Makers Mob for detailed build tutorials:
go.themakersmob.com/john-heis...
My "Scrap bin" channel:
/ ibuilditscrapbin
#ibuildit
#woodworking
Website: ibuildit.ca/
Facebook: / i-build-it-25804801424...
Instagram: / i_build_it.ca

Хобби

Опубликовано:

9 дек 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 55

@JohnHeisz 6 месяцев назад

Sometimes I rush into a project and the results are less than optimal. The first clue is that I make more mistakes than I usually do and that's due to a lack of detail planning. The second is I don't build-in the features I originally thought of because my overall confidence in the project was low while building it (and making so many mistakes). Most of the stuff you'll see on RU-vid is made to look flawless and work perfectly the first time. Reality is that video is magical in that you can make an otherwise failed project look successful. I won't say my miter guide was a complete failure, but it wasn't what I pictured it would be when I first started designing it. I guess the lesson with this one is to have more respect for the design stage of the project, rather than taking the attitude that I can "fix it on the fly" when problems crop up. I can fix it, but it leads to a sub-optimal result and tarnishes my desire to use it. The upgrade to indexed angles and rebuilding and reconfiguring the stop make this a worthy addition to my shop and a tool I'll be proud to say I made.

@martinsvensson6884 6 месяцев назад

Sometimes its hard to think of everything in the design phase. A "prototype" makes it easier to see how everything works in real life. Often there are small things you didn't really think of until you actually use it.

@MRrwmac 6 месяцев назад

Nothing to be embarrased about. Actually glad you came back to tell us how you and we could make it better! Thanks!

@benaloney 6 месяцев назад

Iteration is how the best products are made👌

@indisputablefacts8507 6 месяцев назад

I bet you're not done refining this thing. Or at least I hope you're not. Things like this are never perfect after just a couple of iterations. I've got a feeling you're going to add another patch of sandpaper out further to keep long pieces from being just that little bit off. You might consider a fine-adjustment mechanism for the stop - lots of high-end miters do that, although I don't know that I personally don't recall ever having a crucial application for that feature. Might also consider a length tape.

@mikewelch3903 20 дней назад

Remember what we engineering students in college say, “Successful people never make mistakes. Only prototypes.”

@n8sot 6 месяцев назад

love the spline on the stopblock......great idea!!!!

@marshallalwin6062 6 месяцев назад

Almost any designer will tell you that most of the knowledge is gained through several prototypes. There is always room for some improvement. Great job on the miter gauge

@JOSEPH-vs2gc 6 месяцев назад

yup, Iterating makes life 100 times easier. Perfectionism is sorta like a creative noose really, unless its the last 5% of the project which requires you to be perfect.

@Stakman1 6 месяцев назад

I realize compared to some of your other tool builds this one is quite small, but its one of my favorites. Thanks for sharing.

@sportsman1824 6 месяцев назад

It's always a pleasure watching your videos.

@GregsGarage 6 месяцев назад

Good upgrades John!

@skippylippy547 6 месяцев назад

Nice improvement to an already great build John. Love it.

@cafecybernz 6 месяцев назад

Awesome video! Often the 'fixing my mistakes' and 'project improvements' ones are the best. You clearly mentioned what you were trying to achieve at the beginning, before explaining how you did it in details, while providing very useful tips on how to measure 22.5 and 45 degree angles. Fantastic!

@jeffshelton77 6 месяцев назад

Your my favorite woodworker!

@sapelesteve 6 месяцев назад

Nicely done John! There's always room for improvement! 👍👍

@akarlska 6 месяцев назад

Great video, but you don’t need the funky music. Your voice, and the tools, is all we need ❤️

@MCsCreations 6 месяцев назад

Really nice work, John! 😃 But yeah, it's through the mistakes that we learn! Stay safe there with your family! 🖖😊 And happy holidays!

@JB-fh1bb 5 месяцев назад

I have two major precision-related pain points: 1. The stop block. Since the clamping part of the block is now very close to the top of the “fence” it creates a pivot point and any pressure against the bottom of the block is at a mechanical advantage vs the clamp. I’m validated that you noticed this also and came up with a potential solution for keeping the bottom parallel, but I don’t think it’s enough especially since there’s a strong instinct to snug up against the stop block and apply some force during repeated cuts 2. The sandpaper (and tape) make a difference in “fence” profile that could affect any wood piece that’s longer than the sandpaper Thank you for this channel. I’m “complaining” about tiny details because of how much respect I already have for your shop, the tools you created, and the precision you have in your methods.

@JohnHeisz 5 месяцев назад

A great reality check for your pain points would be to build it and then you'll be able to see first hand whether the problems you think are an issue are actually issues at all. I can tell you they aren't, but I get the feeling you won't believe me.

@JB-fh1bb 5 месяцев назад

@@JohnHeiszYou're right that I usually need someone to go in to deep detail (or test it myself) before I can agree with them saying it's fine, but not in this case. You have more experience in woodworking precision and clearly care about it in the ways that I do. I trust your word. Thanks for the reply

@_J.F_ 6 месяцев назад

That is a great looking mitre fence and I like the sandpaper to hold stock firmly against the fence. How big a difference the folding part of the fence will ever make I don't know but I love the concept of it.

@Gus0046 6 месяцев назад

Buen trabajo muy bien hecho 👍

@edmundandrada 6 месяцев назад

Amazing build! :)

@davestinyworkshop 6 месяцев назад

Awesome upgrades!

@DennisMathias 6 месяцев назад

Kind of interesting that we seem to be moving away from sleds to this miter. Very cool.

@kennethnielsen3864 6 месяцев назад

Thanks for sharing.

@russellwheeler2760 5 месяцев назад

Nice little upgrade tweaks. I've got a suggestion...a tape measure along the top for your stop block so you know how long you're cutting?

@qapla 6 месяцев назад

Nice improvements. I often find myself tweaking jigs and tools I make.

@tomdenny8507 6 месяцев назад

Nicely done.

@54mgtf22 6 месяцев назад

Great work 👍

@Ro-ni7nm 6 месяцев назад

A chippy that owns a vernier caliper is ok in my books, like you my fingers also like to live dangerously(forstnerbit) Keep up the good work John!

@pjmazar4533 3 месяца назад

If all you did was to put a bolt in a hole it would be hard to make a mistake. I love to fabricate new things in wood or metal, and I have definitely made some mistakes. I believe being able to repair a mistake is where the real talent lies. Keep up the good work and thanks for some great videos.

@genelomas332 6 месяцев назад

Interesting that you chose to use fine sand paper and not a thin rubber, or cork sheet for the grip in the fence.. Would like to get a review of this build in a few months if you could John.. Cheers 👍

@MASI_forging 6 месяцев назад

How awesome 😍😍

@ahmed_mounir 6 месяцев назад

good job ❤

@robertjones6649 6 месяцев назад

Just what I am looking for. I can’t seem to find the plans for this on your website.

@rickkinney1249 6 месяцев назад

good video thanx rick

@darcybentley810 6 месяцев назад

Would the hole for the drill bit wear out after a while and change the angle.

@KipdoesStuff 6 месяцев назад

it would take A LOT of wear or extreme abuse to change the angle.

@rossmckenzie2283 6 месяцев назад

One more improvement John might be a measuring tape along the top edge.

@rafvdp6391 6 месяцев назад

That where not mistakes but ’’ upgrades or refinaments ’’ 😀. The sandpaper is going on mine . I always try to clamp my piece on it but when I don’t or can’t it always moves when it's super important to be exact ,of course never when it's not that critical . So thanks for the ” upgrade ” 👍

@rafezetter8003 6 месяцев назад

The only way to see what needs to be "better" is to make the first one. I'm already starting my THIRD bench build and I didnt finish the 1st or 2nd one.

@stephenbezanson4633 6 месяцев назад

I have yet to find a steel framing square that is actually “square.”. Yup, I know how to adjust them with a center punch to get them “close” but keep in mind that they are designed for framing which only needs to be somewhat close; but not precisely square… I have several (yes - expensive) squares that I trust but my framing squares are not in that group…

@banditva8040 6 месяцев назад

Any plans for this guide.

@nerop 6 месяцев назад

John, shouldn't you run the sandpaper along the length of the fence? Otherwise you either dont have any support on the bare parts (if holding workpiece against sandpaper) or your piece is going to rock on the edge of the sandpaper (if holding workpiece against bare)

@barry.w.christie 6 месяцев назад

Sometimes you only realise something is wrong when you start using it ... I try to 3D model most of my projects as it allows me to play about with different approaches to a problem, sorting out any issues before I start making anything ... doesn't always work though, sometimes you just need to make it 👍

@davip5876 6 месяцев назад

Nice touch to have a place for every loose bit Every homeless needs shelter

@dannydodge7191 6 месяцев назад

I love your videos. I’ve picked up lots of tips and tricks from your ideas over the years. But, all your videos seem a little rushed lately. I start hearing your new closing music sometimes it seems right after the video starts.

@bascodelagamma 6 месяцев назад

👍

@EitriBrokkr 6 месяцев назад

They were not mistakes. Its called Research and Development. I know multi billion dollar accompanies that have had products out for decades that won't update obvious oversights.