Westone X390 Pantera CB - Tribute Guitar Build - High Gloss Guitar Finish - The Struggle is REAL!!

Подписаться 18 тыс.

Просмотров 7 тыс.

50% 1

This is NOT a Tutorial... nor is it my favorite part of a Guitar build.
Mistakes were made and overcome trying to do a high gloss rattle can guitar finish.
In this video I go through my attempt(s) in doing a high gloss guitar finish using stains and rattle cans.
I probably made every mistake in the book and had to start over several times and almost gave up and trashed the guitar.
However, in the end I persevered and ended up with a very decent glossy finish and new found knowledge about finishing a guitar.
Disclaimer:
- My frustration does show in the overall quality of this video, but I didn't want to hide it because problems and frustration are also a big part of guitar making. -
The Rules Compounds I used:
www.rupes.com/product/compoun...
If you like to follow along with this guitar build make sure to subscribe and turn on your notifications to don't mis any of the upcoming videos.
Interested in more guitar building related videos?
Check out my channel for more tips and tricks, tool reviews and guitar builds for the (beginner) luthier in a small workshop.
Chapters:
0:00 Intro
1:03 Color Matching
2:44 Staining the Guitar
6:24 Sanding Sealer
7:47 Orbital Sander
8:11 Let's try that again
10:17 Spray Booth
10:36 Caspian Blue Colored Lacquer
16:40 1K Clear Lacquer
21:16 Wet Sanding
23:55 Polishing the Finish
32:50 Shielding Paint
34:08 End Result
34:34 Things I've learned
40:42 Outro
Unquendor Guitars links:
Email: info@unquendor-guitars.nl
Website: www.Unquendor-Guitars.nl
Merchandise : teespring.com/stores/unquendo...
Instagram: unquendor_g...
Facebook: / unquendor
Do you like the tools I'm using and want to support me?
Here are some Amazon affiliated links that help you get yours and support me at the same time.
amzn.to/3vuCJtV - Incra Protractor (Imperial)
amzn.to/3tlEKXx - Incra Protractor (Metric)
amzn.to/3cw7pm1 - Triton TRA001 Router
amzn.to/38HhMlW - Triton MOF001 Router
amzn.to/3qQJvqz - Bosch PBD40 Pillar Drill
amzn.to/3cOe8rN - Alpen Forstner bits
Or check out all my tool Suggestions in my Amazon store:
www.amazon.com/shop/unquendor...
Get epic music for your content and support me and my channel with Epidemic-Sound using this link:
www.epidemicsound.com/referra...

Видеоклипы

Опубликовано:

28 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@sean4586 Год назад

This was one of your BEST videos! You are one of the most detailed and patient people on RU-vid. To see you be challenged but succeed was so much fun to watch. I was cheering you on the time. I watch videos rom alot of builders and I always say to myself- Come on, there is no way you did this so perfectly and so easy with no problems. Great to see real reality "TV"

@williamjones3616 Год назад

Building a guitar is one thing. However, finishing is an art of its own and you can only perfect it by making mistakes. Great work and a beautiful looking instrument.

@peterjones3100 Год назад

Fabulous effort, I love the Westone brand and have had sooo many over the years, and this is a beautiful tribute to the x390, congrats! I was praying you didn't burn through with that polisher, especially when I see you not using water with the compound 😮 A great tip for keeping the orange peel to a minimum when applying from rattle cans is... while you're warming the can, take a hairdryer to the body immediately before spraying to raise the temperature of your project slightly, a warm spray onto a colder base enhances orangepeel ;)

@chadkoons Год назад

Long time fan of the X390/X350... you have done amazing work 👀😍 You need to share this with Trevor Rabin, I bet he will answer you! These videos make me appreciate the level of craftsmanship Matsumoku put into this design!

@jaumebosca2566 Год назад

101% agreed!

@stevemaalt Год назад

I only recently found you on RU-vid and started watching your videos within the last few months. I truly appreciate you sharing your frustrations/insecurities/mistakes in this video. So often people only show their very best work and everything going "right". We all know practice makes perfect and "failing upwards" is how we grow. However, our culture tends to prefer perfection over reality. From magazines, to Instagram, to youtube - it's everywhere. By adding that human element into your video, you inspire people like me who are still cutting their teeth to keep at it until I am truly satisfied with my work. On top of that, the end result was AMAZING and I hope to do something similar at some point. Thank you very much for sharing your progress, and I can't wait to see the final result!

@jaumebosca2566 Год назад

Your anxiety in this part is quite noticeable, but you are a brave builder! You nailed the colour! Your Pantera looks extremely gorgeous now. Thanks for sharing this amazing project Daniel. I appreciate it so much!

@andrewmundenandcadfellmast4624 Год назад

Great work Daniel - it looks fabulous mate👍🏼😊. Love the colour, too. Was a bit dubious at first, but the Caspian blue is beautiful! Thank you for the way you showed us your concerns and methods as well as the tips at the end. I really enjoyed this video😊

@barrychristian4050 Год назад

Challenging ourselves outside of our comfort zones is how we grow our skills. I feel your pain as I hate when things don't go as well as planned but overcoming them is always a positive. You should be proud, this is a fantastic looking guitar ( and finish) 👍

@littlecncshop Год назад

When you're spraying clear over a color, there's really no need to do much sanding at all. Just level it a bit with 1500 grit, and spray they clear right over it, and then sand the clear level. This will prevent you from sanding through the color and having to redo it....also I wouldn't recommend wet sanding a color coat. It can cause moisture to get into the wood, and raise the grain....also if you like that 1k clear in a can, try out the 2k. It dries incredibly fast because it contains a catalyst.

@TheGlaude09 Год назад

This video will be more useful than any other simply demonstrating the steps. Thanks to you, anyone will understand that finishing a guitar is not a quick and easy job. They will know that frustration is a normal step in the process, and that they shouldn't give up! Time and patience is key, I learnt it the hard way as well :) That finish looks perfect to me btw ;)

@greenman7yyy Год назад

Your spray passes should ALWAYS start with a dust coat; the purpose of the dusting coat is to dry a little and then provide more for the coat to grab onto. From one coat to the next, ALWAYS alternate horizontal then vertical passes. The following coat with then be horizontal again and so it continues to alternate every other coat. The purpose of alternating the direction of the coat passes (strokes) is weaving the paint layers fir strength; it is similar to construction with composite layers, alternating horizontal (strokes) layer followed by a vertical layer; this is also good for leveling. Your sprayer needs to have rotating nozzle or the work item must itself be rotated 90° instead of changing the plane of stroke.

@paulcumming7438 Год назад

Always love your videos. They are always honest and inspirational.great to see you start the finishing in high gloss as a total novice, overcoming all the problems it brings step by step, and completing to a beautiful standard at the end. Well done indeed. Best videos on utube. Please keep sharing your skills.

@Dncr Год назад

You have picked up a very tough challenge yet over come with perfection.

@grizcuz Год назад

It's unusual to see you looking apprehensive. When we've seen you doing incredibly detailed and complex inlays like they were a walk in the park. I hope you enjoyed building this model, because I wouldn't be surprised if people reach out to you to build more. It looks like an absolutely first class instrument, the way it shines and catches the light reminds me of polished stone.

@Ferret_76 Год назад

A fine job! Your concerns and frustration with applying such a finish are testament to what is clearly a labour of love building this guitar.

@radovandragun7673 Год назад

Daniel, that is an amazing finish, well done mate…

@bennyG140 Год назад

I was a little worried when I seen you start buffing with little polish but then you figured it out and kept it wet🤙 you're a fast learner and that finish came out a million bucks👌 I came here because Ive been search how to make my own guitar and I'm so glad I've found you! Keep up the beautiful work!

@UnquendorGuitars Год назад

Hi BennyG, Thank you very much. Yes, I had to find out how much polish to use. Too little and there is a chance of burning through the finish. And to much and the compound spray is all over the shop.

@chickenbeek Год назад

This deserves to exist. Wow. Those are one of my favorite shapes from that era. Very well done, looks absolutely fantastic. Congratulations. 👍

@UnquendorGuitars Год назад

Hi Checkenbeek, Thank you very much.

@mikehermges6073 Год назад

Your level of craftsmanship and honesty are amazing, you always inspire me to do better, be patient and press on thank you and keep posting

@EntropiaGuitars Год назад

I spray painted for 3 years professionally. Wet sanding is fine, I've refinished a few strats and always wet sanded with around 1200, then soft pads at 2000, then buffing compounds for a finish that was flawless.

@EntropiaGuitars Год назад

FYI, it's temperature that may burn through the finish. While it may not be practical in your workshop, I would only polish with water and the compound. The key to keeping burns away is appropriate speed, water and taking it easy on hard edges like cavities, or on the sides. Start off with a cutting compound with a hard pad, work your way up to a glaze compound and a super soft pad.

@EntropiaGuitars Год назад

And well done on a GREAT finish, it looks superb. You should be dead proud of yourself Daniel!

@michaelsilva3513 Год назад

Slow and steady wins the race. Beautiful. Thanks for sharing this.

@JimsevenFrankenstein 6 месяцев назад

Wow, the finishing you successfully completed turned out incredible! I felt so bad when you did the first take and then started over...you put in so much effort and time up until that point and when it didn't turn out like you wanted I could tell you were just crestfallen. I'm so happy for you that you turned around and just pushed through till the end and you came out with that spectacular finish. Congrats 👏 All your hard work and diligence payed off! I absolutely love the final results!

@jonahguitarguy Год назад

Beautiful!! I agree the gloss finish is by far the most difficult part of the job. It really turned out nicely.

@davidwellings2783 Год назад

Heart in the mouth stuff Daniel, but, as ever, some absolutely stunning work and a breathtaking outcome! I’d love a shed workshop like yours….! 🥰🥰🍷🍷🎸🎸

@bignasty1000 Год назад

the guitar looks so good! I've also had bad experience with lacquer, but seeing you do such a fine job makes me motivated to try again. Killer guitar!

@steveroberts Год назад

Beautiful guitar Daniel. Your finish is fabulous despite your fears. Well done again

@edadpops1709 Год назад

As long as you wait a couple days to let water dry out wet sanding works well and has been done for decades. Your handicap is using a rattle can ,but its a slo process either way and is looking great.

@dustdevilz4771 Год назад

Lots of hand work and the result looks every bit worth the effort. Great video too. Thanks!

@OB-ec2lo Год назад

That guitar is beautiful. Could only dream of one. Thank you for the videos. Will be stunning when completed 😎

@hallbergjonatan Год назад

Great job! The guitar looks really good. Stewmac has a great video tutorial on their youtube channel. It is a collaboration with Driftwood guitars and they go through very deeply on how to do a nitrofinish with an aerosol can. Great job and keep on the great work and videos!

@janmrlik2763 Год назад

Hi, Daniel, thank you so much for your nice instruction video and for your great advices in the end of this episode. Just now I am struggling with finishing of the body and neck of Jazz Bass kit, and I am very appreciate your experience with Panthera. So they say - finis coronat opus and you done it very nicely. Tank you again.

@Furtheronmusic Год назад

Excellent result. I have had one shot at a rattle can spray lacquer finish and mine was frankly a big error.

@stu_y Год назад

Have you thought about relicing it? Just kidding! :D A brilliant watch as always, the end result looks amazing.

@michaeldorman Год назад

I’m impressed with the evenness of the stain you were able to get. It really looks great.

@mrwaffles1394 Год назад

I get it. I agonize over the finish as well. I'm still not happy with my GGBO build. It ended up much more green than I wanted. But I didn't have time to sand it off and redo it. But in the end you got there. As we say in Texas, it's shining like a diamond in a goat's ass.

@MrForgelune Год назад

great result!

@j.boogie1646 Год назад

Beautiful work .. Can't wait to see the end !!!

@corecreekproductions6533 Год назад

Gorgeous build!

@projiepaul Год назад

Looking absolutely fantastic!!!😁

@andrekruger9760 Год назад

It look amazing. Keep up the great work.

@rfdunbar Год назад

That’s a gorgeous experiment Daniel! I love it!

@deann2609 Год назад

Looks great!

@chogumchonsa Год назад

Excellent finish. I’ve learned quite a bit in this video. Thank you.

@tyremanguitars Год назад

great job bro, looks amazing!

@doronf1797 Год назад

Heavenly beautiful

@MatthiasPowerbomb Год назад

That thing looks phenomenal.

@jimclark7917 Год назад

Great job on the finishing Daniel!

@GuitaraddictsWorkshop Год назад

That finish looks stunning! Very impressive!

@martindl9897 Год назад

Very beautiful guitar. Great honest video!! Congratulations Daniel.

@kennburgess1541 Год назад

Absolutely beautiful. You’re doing an amazing job on that tribute.

@justinrayguitars6024 Год назад

You did a great job ! The color is perfect in my opinion.

@konsolkongendk Год назад

Amazing work Daniel. The finish looks amazing! Great advice too for us with OCD tendencies when doing projects :)

@stanleychow9396 9 месяцев назад

You are really great and your guitar work

@r.honeycutt8660 Год назад

Really like the high quality finish you got. I have been using McQuires buffing compound and similar foam polishing mandrells in my drill then coating it with wax.

@Overit5000 Год назад

Daniel, your work ethic, attention to detail, and passion is unparalleled. Constantly impressed. Build a 7 string 😘😂

@dunboozin Год назад

Superb mate, hate clear coating myself.

@Rockstar-lx2li Год назад

Wow... awesome 👌

@mikeivey8471 Год назад

Your work is outstanding every time !! I love the color of this guitar !! You got a glorious, high gloss shine on that instrument !! Thank you for sharing your struggles and success with us !!

@olivergold5398 Год назад

Great result of the finish. Although it took very long. Keep practicing painting. Surely you will bring this to the same level of profession as your wood working.

@bradjensen4902 Год назад

Great video! I have used Micro Mesh for finishes with spirit varnish on violins and find it tops for versatility when wet sanding. Grits up to 12K.

@r.llynch4124 Год назад

Amazing work Daniel. It looks perfect. I also dislike staining and finishing. Good thing about staining, you can always sand back and do over. The clear coats are a different animal though.

@cecilhoward3005 Год назад

Love the finish I am going to do that on a bass I'm building awsome finish..

@Cliff-Evans Год назад

Daniel, I take my hat off to you. That looks like a really good finish. I totally understand your trepedation. I am also not very good with laquer and it always scares me when I try. I have had to walk away many times and will probably have to in the future. You have done an excellent job with this guitar. 👍👍

@daviddonnkin611 Год назад

Well done Daniel, it's not easy.

@carlodevivomusicontent2138 Год назад

Fantastic

@ErebosGR Год назад

Pro tip: Apply a Pre-Stain Wood Conditioner (Minwax is the most popular brand) to avoid splotching. P.S. Make sure you match an oil-based conditioner with oil-based stains and a water-based conditioner with water-based stains.

@peterschut63 Год назад

Super gave video, je angst was uiteindelijk ongegrond….. 😊

@rosszpenz Год назад

Respect Daniel!

@edadpops1709 Год назад

Just remember its not dry in a couple days. You needed to wait a couple weeks to allow gassing off,if you dont it could heat up and then shrink.

@Lordbaccus 3 месяца назад

I do enjoy your videos

@johnstitt2615 Год назад

I thought it was just me. I mean hating this type of finish. You are not alone. The application and challenges......🤪🙃👹🤪like working with brass from scratch. It is great when finished but the road to get there.....painful.

@tSp289 Год назад

"Hey Guysh, don't lishten to me, I'm a noob!" [Produces immaculate, perfect finish first time] "Very passhable"

@robmarmaduke Год назад

Very shiny!

@trident1314 Год назад

I reckon your being a bit hard on yourself regarding finishing tbh....looks awesome

@StrudlePie 4 месяца назад

Noted ✅️ ❤

@swiwswiw Год назад

Yuh!

@corecreekproductions6533 Год назад

I like the button down shirt with your logo but didn’t see it available on your merch page… do you have any plans to sell them?

@giannifunky Год назад

Where is located your shop?

@jeremywalker666 11 месяцев назад

I love this channel but my wife says his accent gives her bad anxiety. Lol What? I've never heard such things. I guess I can only watch when she's out of the room.